Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HOLE MOBILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Charge Storage, Conductivity and Charge Profiles of Insulators as Related to Spacecraft Charging

Dissipation of charges built up near the surface of insulators due to space environment interaction is central to understanding spacecraft charging. Conductivity of insulating materials is key to determine how accumulated charge will distribute across the spacecraft and how rapidly charge imbalance will dissipate. To understand these processes requires knowledge of how charge is deposited within the insulator, the mechanisms for charge trapping and charge transport within the insulator, and how the profile of trapped charge affects the transport and emission of charges from insulators. One must consider generation of mobile electrons and holes, their trapping, thermal de-trapping, mobility and recombination. Conductivity is more appropriately measured for spacecraft charging applications as the "decay" of charge deposited on the surface of an insulator, rather than by flow of current across two electrodes around the sample. We have found that conductivity determined from charge storage decay methods is 102 to 104 smaller than values obtained from classical ASTM and IEC methods for a variety of thin film insulating samples. For typical spacecraft charging conditions, classical conductivity predicts decay times on the order of minutes to hours (less than typical orbit periods); however, the higher charge storage conductivities predict decay times on the order of weeks to months leading to accumulation of charge with subsequent orbits. We found experimental evidence that penetration profiles of radiation and light are exceedingly important, and that internal electric fields due to charge profiles and high-field conduction by trapped electrons must be considered for space applications. We have also studied whether the decay constants depend on incident voltage and flux or on internal charge distributions and electric fields; light-activated discharge of surface charge to distinguish among differing charge trapping centers; and radiation-induced conductivity. Our experiments also show that "Malter" electron emission occurs for hours after turning off the electron beam. This Malter emission similar to emission due to negative electron affinity in semiconductors is a result of the prior radiation or optical excitations of valence electrons and their slow drift among traps towards the surface where they are subsequently emitted. This work is supported through funding from the NASA Space Environments and Effects Program.

Dennison, J. R.↗

Enhancing controllability and stability of bottom-gated graphene thin-film transistors by passivation with methylamine

This paper is intended to aid to bridge the gap between chemistry and electronic engineering. In this work, the fabrication of chemical vapour deposited graphene field-effect transistors employing silicon-nitride (Si{sub 3}N{sub 4}) gate dielectric is presented, showing originally p-type channel conduction due to ambient impurities yielding uncontrollable behaviour. Vacuum annealing has been performed to balance off hole and electron conduction in the channel, leading to the observation of the Dirac point and therefore improving controllability. Non-covalent functionalisation by methylamine has been performed for passivation and stability reasons yielding electron mobility of 4800 cm{sup 2}/V s and hole mobility of 3800 cm{sup 2}/V s as well as stabilised controllable behaviour of a bottom-gated transistor. The introduction of interface charge following the non-covalent functionalisation as well as the charge balance have been discussed and analysed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Temperature dependence of the atomic structure and electrical activity of defects in ZnSb thermoelectric lightly doped with copper

A model for describing the temperature dependence of the defect microstructure in high-efficiency ZnSb thermoelectric with a copper content of 0.1 at % is chosen. The temperature dependences of the chargecarrier density and mobility for thermal cycle I (300–700–300 K) are analyzed taking into account the features of the crystal structure and covalent chemical bond in ZnSb. The basic defect structure (at temperatures of T = 560–605 K) is the state when all Cu atoms are equally distributed between sites of both sublattices and behave as acceptors, and the number of intrinsic donor and acceptor defects is much smaller. The effect of the latter becomes noticeable when the temperature goes beyond the above-mentioned range. At T > 605 K, extra acceptors (antisite Zn{sub Sb}) occur; upon cooling below 560 K, Cu{sub 2} dimers arise and the electrical activity of the impurity lowers. Dimer decay upon heating leads to growth in the concentration with temperature up to saturation in the above-mentioned range. Additional thermal cycles II–VIII are performed; the observed changes in the temperature dependences of the hole concentration and mobility are discussed in the context of the investigated model.

36 MATERIALS SCIENCE↗

A new defect chemistry model for Nb-doped SrCoO 2.5+δ: The role of oxygen interstitials and delocalized-to-localized electron holes

Here a new defect chemistry model featuring oxygen interstitials ( O" I ) and delocalized-to-localized d-electron holes (Co' Co 2.5 reference framework to elucidate transport properties of Nb-doped SrCoO 2.5+δ (SCN) system over a range of partial pressure of oxygen (Po 2 ) and temperature (T). With this new defect chemistry model, the electronic conductivity behaviors with T and Po2 can be well interpreted by the change in concentration of d-electron holes migrating with a constant mobility. The important concentration contours of electron holes, excess electrons and oxygen interstitials are mapped out on the T-Po 2 domain, from which hole-concentration and conductivity under iso-stoichiometry are reconstructed. The partial/integral molar thermodynamic properties and thermodynamic factor of the SCN solid solution are also determined. A transitional delocalized-to-localized hole-transport mechanism with decreasing oxygen stoichiometry is discussed based on p=p(T) obtained under constant oxygen stoichiometry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of dopant compensation on the temperature dependence of the transport properties in p-type monocrystalline silicon

In this paper, we investigate the temperature variations of the hole transport properties in initially uncompensated boron-doped Czochralski silicon progressively compensated through thermal donors activation. After each donor generation anneal, the boron and thermal donor concentrations in the samples are determined using (1) the change in carrier concentration at room temperature and (2) the analysis of the temperature variation of the carrier concentration in the range 77–350 K. By comparing both methods with theory, evidence is brought that down to 77 K the Hall factor is unaffected by compensation up to high compensation levels. This is of great interest for researchers working on new solar-grade materials since it nicely suggests that Hall factor models previously established for non-compensated silicon can be applied to compensated samples, for example, when extracting the individual dopant concentrations from the temperature variations of the hole concentration. At very high compensation levels, anomalous Hall data lead to erroneously low carrier mobility values. We showed that this artifact was due to the formation of a n-p-n transistor, arising from the preferential formation of thermal donors in the sample's subsurface. After rejecting these unphysical data from the analysis, we confirm that the hole mobility is greatly affected by compensation in the temperature range investigated. We eventually confront our experimental data to current mobility models and discuss the possible sources of discrepancy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic order close to superconductivity in the iron-based layered LaO1-xFxFeAs systems

Following the discovery of long-range antiferromagnetic order in the parent compounds of high-transition-temperature (high-T{sub c}) copper oxides, there have been efforts to understand the role of magnetism in the superconductivity that occurs when mobile 'electrons' or 'holes' are doped into the antiferromagnetic parent compounds. Superconductivity in the newly discovered rare-earth iron-based oxide systems ROFeAs (R, rare-earth metal) also arises from either electron or hole doping of their non-superconducting parent compounds. The parent material LaOFeAs is metallic but shows anomalies near 150 K in both resistivity and d.c. magnetic susceptibility. Although optical conductivity and theoretical calculations suggest that LaOFeAs exhibits a spin-density-wave (SDW) instability that is suppressed by doping with electrons to induce superconductivity, there has been no direct evidence of SDW order. Here we report neutron-scattering experiments that demonstrate that LaOFeAs undergoes an abrupt structural distortion below 155 K, changing the symmetry from tetragonal (space group P4/nmm) to monoclinic (space group P112/n) at low temperatures, and then, at {approx}137 K, develops long-range SDW-type antiferromagnetic order with a small moment but simple magnetic structure. Doping the system with fluorine suppresses both the magnetic order and the structural distortion in favour of superconductivity. Therefore, like high-T{sub c} copper oxides, the superconducting regime in these iron-based materials occurs in close proximity to a long-range-ordered antiferromagnetic ground state.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Voltage dependence of the differential capacitance of a p{sup +}-n junction

The dependences of the differential capacitance and current of a p{sup +}-n junction with a uniformly doped n region on the voltage in the junction region are calculated. The p{sup +}-n junction capacitance controls the charge change in the junction region taking into account a change in the electric field of the quasi-neutral n region and a change in its bipolar drift mobility with increasing excess charge-carrier concentration. It is shown that the change in the sign of the p{sup +}-n junction capacitance with increasing injection level is caused by a decrease in the bipolar drift mobility as the electron-hole pair concentration in the n region increases. It is shown that the p{sup +}-n junction capacitance decreases with increasing reverse voltage and tends to a constant positive value.

36 MATERIALS SCIENCE↗

An origin of good electrical conduction in La{sub 4}BaCu{sub 5}O{sub 13+δ}

We have prepared a set of polycrystalline samples of the metallic copper oxide La{sub 4}BaCu{sub 5−x}Co{sub x}O{sub 13+δ} (0 ≤ x ≤ 0.35) and have measured the resistivity from 4 to 800 K. All the resistivities show metallic temperature dependence with a small magnitude less than 2 mΩ cm at 800 K, indicating that the metallic conduction is robust against impurities. The robust metallic conduction further suggests that this class of oxide is a promising candidate for electrical leads at high temperature, which might replace platinum. A detailed measurement and analysis on the Hall resistivity have revealed that at least two components are responsible for the electrical conduction, in which a large number of electrons of moderate mobility coexist with a much smaller number of holes of extremely high mobility. This large electron density well screens the impurity potential and retains the metallic conduction against 7% impurity doping.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Advantages of flattened electrode in bottom contact single-walled carbon nanotube field-effect transistor

We fabricated single-walled carbon nanotube (SWNT) field-effect transistor (FET) devices on flattened electrodes, in which there are no height difference between metal electrodes and the substrate. SWNT-FET fabricated using bottom contact technique have some advantages, such that the SWNTs are free from electron irradiation, have direct contact with the desired metal electrodes, and can be functionalized before or after deposition. However, the SWNTs can be bent at the contact point with the metal electrodes leading to a different electrical characteristic of the devices. The number of SWNT direct junctions in short channel length devices is drastically increased by the use of flattened electrodes due to strong attractive interaction between SWNT and the substrate. The flattened electrodes show a better balance between their hole and electron mobility compared to that of the non-flattened electrodes, that is, ambipolar FET characteristic. It is considered that bending of the SWNTs in the non-flattened electrode devices results in a higher Schottky barrier for the electrons.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

α-Particle Detection and Charge Transport Characteristics in the A 3 M 2 I 9 Defect Perovskites (A = Cs, Rb; M = Bi, Sb)

Here, we have investigated the defect perovskites A 3 M 2 I 9 (A = Cs, Rb; M = Bi, Sb) as materials for radiation detection. The phase purity of Bridgman-grown A 3 M 2 I 9 single crystals was confirmed via high-resolution synchrotron X-ray diffraction, while density functional theory calculations (DFT) show surprisingly dispersive bands in the out-of-plane direction for these layered materials, with low effective masses for both holes and electrons. Accordingly, each of the four A 3 M 2 I 9 defect perovskites showed response to 241 Am α-particle irradiation for hole and electron electrode configurations, a remarkable ambipolar response that resembles the 3D halide perovskites. The electron response spectra were used to estimate the mobility–lifetime product (μτ) e for electrons in these materials, with Rb 3 Bi 2 I 9 showing the lowest (μτ) e value of 1.7 × 10 – 6 cm 2 V –1 and Cs 3 Bi 2 I 9 the highest (μτ) e of 5.4 × 10 –5 cm 2 V –1 . The rise time of the α-particle-generated pulse was used to estimate the electron mobility μ e of the A 3 M 2 I 9 defect perovskites, which ranged from 0.32 cm 2 V –1 s–1 for Rb 3 Sb 2 I 9 to 4.3 cm 2 V –1 s –1 in Cs 3 Bi 2 I 9 . Similar analysis of the hole response spectra yielded (μτ) h values for each A 3 M 2 I 9 compound, with Cs 3 Bi 2 I 9 again showing the highest (μτ) h value of 1.8 × 10 –5 cm 2 V –1 , while Rb 3 Bi 2 I 9 showed the lowest (μτ) h with 2.0 × 10 –6 cm 2 V –1 . Rise time analysis gave hole mobilities ranging from 1.7 cm 2 V –1 s –1 for Cs 3 Bi 2 I 9 to 0.14 cm 2 V –1 s –1 for Cs 3 Sb 2 I 9 . Comparing the experimental electron and hole mobilities to the effective masses obtained from DFT calculations revealed sizable discrepancies, possibly indicating self-trapping of charge carriers due to electron–phonon interactions. The α-particle response of the A 3 M 2 I 9 defect perovskites demonstrates their potential as semiconductor radiation detectors, with Cs 3 Bi 2 I 9 and Cs 3 Sb 2 I 9 showing the most promise.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Switching Oxide Traps

We consider radiation-induced charge trapping in SiO2 dielectric layers, primarily from the point of view of CMOS devices. However, SiO2 insulators are used in many other ways, and the same defects occur in other contexts. The key studies, which determined the nature of the oxide charge traps, were done primarily on gate oxides in CMOS devices, because that was the main radiation problem in CMOS at one time. There are two major reviews of radiation-induced oxide charge trapping already in the literature, which discuss the subject in far greater detail than is possible here. The first of these was by McLean et al. in 1989, and the second, ten years later, was intended as an update, because of additional, new work that had been reported. Basically, the picture that has emerged is that ionizing radiation creates electron-hole pairs in the oxide, and the electrons have much higher mobility than the holes. Therefore, the electrons are swept out of the oxide very rapidly by any field that is present, leaving behind any holes that escape the initial recombination process. These holes then undergo a polaron hopping transport toward the Si/SiO2 interface (under positive bias). Near the interface, some fraction of them fall into deep, relatively stable, long-lived hole traps. The nature and annealing behavior of these hole traps is the main focus of this paper.

Oldham, Timothy R.↗

Minority-charge-carrier mobility at low injection level in semiconductors

From the kinetic equations, the distribution functions for majority and minority charge carriers are obtained at a low injection level. For describing the electron-hole collisions, the Landau collision integral is used. The carrier scattering at ionized or neutral impurity and at acoustic phonons is taken into account. The majority-carrier distribution function is presented in the analytical form. The minority-carrier mobility is calculated and analyzed, and the features of its behavior at low temperatures are revealed. It follows from the developed theory that the hole mobility in an n-type material increases with doping and neutral-impurity concentration. This effect is attributed to mutual charge-carrier collisions and different effective masses of different-sign carriers.

36 MATERIALS SCIENCE↗

Hall effect in the extremely large magnetoresistance semimetal WTe{sub 2}

We systematically measured the Hall effect in the extremely large magnetoresistance semimetal WTe{sub 2}. By carefully fitting the Hall resistivity to a two-band model, the temperature dependencies of the carrier density and mobility for both electron- and hole-type carriers were determined. We observed a sudden increase in the hole density below ∼160 K, which is likely associated with the temperature-induced Lifshitz transition reported by a previous photoemission study. In addition, a more pronounced reduction in electron density occurs below 50 K, giving rise to comparable electron and hole densities at low temperature. Our observations indicate a possible electronic structure change below 50 K, which might be the direct driving force of the electron-hole “compensation” and the extremely large magnetoresistance as well. Numerical simulations imply that this material is unlikely to be a perfectly compensated system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Transparent ambipolar organic thin film transistors based on multilayer transparent source-drain electrodes

A fabrication method for transparent ambipolar organic thin film transistors with transparent Sb{sub 2}O{sub 3}/Ag/Sb{sub 2}O{sub 3} (SAS) source and drain electrodes has been developed. A pentacene/N,N′-ditridecylperylene-3,4,9,10-tetracarboxylic di-imide (PTCDI-C13) bilayer heterojunction is used as the active semiconductor. The electrodes are deposited by room temperature electron beam evaporation. The devices are fabricated without damaging the active layers. The SAS electrodes have high transmittance (82.5%) and low sheet resistance (8 Ω/sq). High performance devices with hole and electron mobilities of 0.3 cm{sup 2}/V s and 0.027 cm{sup 2}/V s, respectively, and average visible range transmittance of 72% were obtained. These transistors have potential for transparent logic integrated circuit applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Integrated optical and electrical modeling of plasmon-enhanced thin film photovoltaics: A case-study on organic devices

The nanoscale light control for absorption enhancement of organic photovoltaic (OPV) devices inevitably produces strongly non-uniform optical fields. These non-uniformities due to the localized optical modes are a primary route toward absorption enhancement in OPV devices. Therefore, a rigorous modeling tool taking into account the spatial distribution of optical field and carrier generation is necessary. Presented here is a comprehensive numerical model to describe the coupled optical and electrical behavior of plasmon-enhanced polymer:fullerene bulk heterojunction (BHJ) solar cells. In this model, a position-dependent electron-hole pair generation rate that could become highly non-uniform due to photonic nanostructures is directly calculated from the optical simulations. By considering the absorption and plasmonic properties of nanophotonic gratings included in two different popular device architectures, and applying the Poisson, current continuity, and drift/diffusion equations, the model predicts quantum efficiency, short-circuit current density, and desired carrier mobility ratios for bulk heterojunction devices incorporating nanostructures for light management. In particular, the model predicts a significant degradation of device performance when the carrier species with lower mobility are generated far from the collecting electrode. Consequently, an inverted device architecture is preferred for materials with low hole mobility. This is especially true for devices that include plasmonic nanostructures. Additionally, due to the incorporation of a plasmonic nanostructure, we use simulations to theoretically predict absorption band broadening of a BHJ into energies below the band gap, resulting in a 4.8% increase in generated photocurrent.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Band or Polaron: The Hole Conduction Mechanism in the p-Type Spinel Rh 2ZnO4

Given the emerging role of oxide spinels as hole conductors, we discuss in this article the traditional vs. new methodologies of determining the type of conduction mechanism at play - localized polaronic vs. band-like transport. Applying (i) traditional small polaron analysis to our in-situ high temperature four-point conductivity and thermopower measurements, we previously found an activated mobility, which is indicative of the small polaron mechanism. However, (ii) employing the recent developments in correcting density functional methodologies for hole localization, we predict that the self-trapped hole is unstable and that Rh{sub 2}ZnO{sub 4} is instead a band conductor with a large effective mass. The hole mobility measured by high-field room temperature Hall effect also suggests band rather than polaron conduction. The apparent contradiction between the conclusion of the traditional procedure (i) and first-principles theory (ii) is resolved by taking into account in the previous transport analysis the temperature dependence of the effective density of states, which leads to the result that the mobility is actually temperature-independent in Rh{sub 2}ZnO{sub 4}. Our case study on Rh{sub 2}ZnO{sub 4} illustrates the range of experimental and theoretical approaches at hand to determine whether the transport mechanism of a semiconductor is band or small polaron conduction.

14 SOLAR ENERGY↗