Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Geophysics for exploration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Spectrophotometric Modeling and Mapping of (101955) Bennu

Using hyperspectral data collected by OVIRS, the visible and infrared spectrometer onboard the OSIRIS-REx (Origins, Spectral Interpretation, Resource Identification, and Security–Regolith Explorer) spacecraft, we modeled the global average spectrophotometric properties of the carbonaceous asteroid (101955) Bennu and mapped their variations. We restricted our analysis to 0.4–2.5 µm to avoid the wavelengths where thermal emission from the asteroid dominates (>2.5 µm). Bennu has global photometric properties typical of dark asteroids; we found a geometric albedo of 0.046 ± 0.007 and a linear phase slope of 0.024 ± 0.007 mag deg–1 at 0.55 µm. The average spectral slope of Bennu’s normal albedo is –0.0030 µm–1, and the phase reddening parameter is 4.3´10–4 µm–1 deg–1, both over the spectral range of 0.5–2.0 µm. We produced normal albedo maps and phase slope maps at all spectral channels, from which we derived spectral slope and phase reddening maps. Correlation analysis suggests that phase slope variations on Bennu are likely due to photometric roughness variation. A correlation between photometric roughness and thermal roughness is evident, implying that the roughness of Bennu is self-similar on scales from tens of microns to meters. Our analysis reveals latitudinal trends in the spectral color slope and phase reddening on Bennu. The equatorial region appears to be redder than the global average, and the spectral slope decreases towards higher latitudes. Phase reddening on Bennu is relatively weak in the equatorial region and shows an asymmetry between the northern and southern hemispheres. We attributed the latitudinal trend to the geophysical conditions on Bennu that result in a global pattern of mass flow towards the equator.

Jian-Yang Li (李荐扬)↗

Hayabusa2#’s Exploration to Asteroids 2001 CC21 and 1998 KY26 Provides Key Insights Into Planetary Defense

The Hayabusa2 extended mission, nicknamed Hayabusa2# (SHARP: Small Hazardous Asteroid Reconnaissance Probe), started its mission after the Hayabusa2 spacecraft successfully returned in December 2020 to the Earth with Ryugu's samples and released the Sample Return Capsule containing it. Hayabusa2#’s key operations include flying by Near Earth Asteroid (98943) 2001 CC21 and rendezvousing with Near-Earth Asteroid 1998 KY26. The flyby is planned to be in 2026, and the rendezvous will be in 2031. Detailed investigations of these targets enable maturing key knowledge and technologies necessary for planetary defense. This paper reviews the characteristics of these targets and strategies to maximize outcomes from the mission. The spacecraft will fly by 2001 CC21 at a speed of ~5 km/s in 2026. Given constraints on the spacecraft condition, not designed to perform a flyby operation, operational plans require careful assessments to maximize the proximity observations of this asteroid. The ~700 m diameter asteroid's shape is currently unknown, though lightcurve observations suggest the asteroid is elongated. While the spin pole is not constrained well, the spin period is about 5.02 h with uncertainties of 0.01 h [1]. The taxonomic class may be L-type, which implies the presence of Calcium-aluminum-rich inclusions (CAI), one of the primitive materials in the solar system [2], although there are studies suggesting an S-type. Therefore, this must be carefully examined. Photometric and spectroscopic observations will strongly constrain this asteroid’s properties. Our rendezvous target, 1998 KY26, is a ~30 m diameter roundish object spinning at a spin period of 10.7 min, which may represent one of the common groups of Near Earth Asteroids in size and composition that give a higher likelihood of threatening the Earth. Radar and optical observations reconstructed this asteroid's shape with high uncertainties and inferred that its surface composition might be similar to that of carbonaceous asteroids [3]. No spacecraft has ever visited such small bodies. Hayabusa2# visiting 1998 KY26 will be the first mission to document its geophysical properties, offering strong insights into what most frequent invaders look like [4].

Hayabusa2#↗

The Viscoplastic Behavior of Natural Hydrate‐Bearing Sandy‐Silts Under Uniaxial Strain Compression ( K 0 Loading)

Abstract The in‐situ stress state and geomechanical properties of hydrate‐bearing sediments impact hydrate formation and gas production strategies. We explore the uniaxial strain compression and stress evolution of natural hydrate‐bearing sandy‐silts from Green Canyon Block 955 in the deep‐water Gulf of Mexico. We performed constant rate of strain uniaxial strain experiments, interrupted by periods where we held the axial stress constant, to explore the vertical deformation and the evolution of the ratio of lateral to axial effective stress ( K 0 ) with time. The hydrate‐bearing sandy‐silt is stiffer and has a larger K 0 than the equivalent hydrate‐free sediment upon loading. During stress holds, the void ratio decreases sigmoidally with the log of time, and K 0 converges to isotropic conditions. We interpret that during loading, the hydrate bears the load and deforms. With time, the hydrate redistributes the load and K 0 increases. We used a viscoelastic model to describe the behavior. The model accurately captures deformation and K 0 trends but does not reproduce all the complex interactions of the hydrate with the porous skeleton. We anticipate that viscous effects within hydrate sediments will impact reservoir compression and stresses during production (hours to days), result in isotropic stress state over geological timescales, and explain the creeping movement in submarine landslides.

58 GEOSCIENCES↗

Investigating the Relationship Between Bolide Entry Angle and Apparent Direction of Infrasound Signal Arrivals

Infrasound sensing offers critical capabilities for detecting and geolocating bolide events globally. However, the observed back azimuths, directions from which infrasound signals arrive at stations, often differ from the theoretical expectations based on the bolide’s peak brightness location. For objects with shallow entry angles, which traverse longer atmospheric paths, acoustic energy may be emitted from multiple points along the trajectory, leading to substantial variability in back azimuth residuals. This study investigates how the entry angle of energetic bolides affects the back azimuth deviations, independent of extrinsic factors such as atmospheric propagation, station noise, and signal processing methodologies. A theoretical framework, the Bolide Infrasound Back-Azimuth EXplorer Model (BIBEX-M), was developed to compute predicted back azimuths solely from geometric considerations. The model quantifies how these residuals vary as a function of source-to-receiver distance, revealing that bolides entering at shallow angles, e.g., 10°, can produce average residuals of 20°, with deviations reaching up to 46° at distances below 1000 km, and remaining significant even at 5000 km (up to 8°). In contrast, bolides with steeper entry angles, e.g., > 60°, show smaller deviations, typically under 5° at 1000 km and diminishing to less than ~1° beyond 5000 km. These findings attest to the need for careful interpretation when evaluating signal detections and estimating bolide locations. This work is not only pertinent to bolides but also to other high-energy, extended-duration atmospheric phenomena such as space debris and reentry events, where similar geometric considerations can influence infrasound arrival directions.

Acoustics↗

Along-Trajectory Acoustic Signal Variations Observed During the Hypersonic Re-Entry of the OSIRIS-REx Sample Return Capsule

The re-entry of the Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer (OSIRIS-REx) sample return capsule (SRC) on 24 September 2023 presented a rare opportunity to study atmospheric entry dynamics through a dense network of ground-based infrasound sensors. As the first interplanetary capsule to re-enter over the United States since Stardust in 2006, this event allowed for unprecedented observations of infrasound signals generated during hypersonic descent. We deployed 39 single-sensor stations across Nevada and Utah, strategically distributed to capture signals from distinct trajectory points. Infrasound data were analyzed to examine how signal amplitude and period vary with altitude and propagation path for a nonablating hypersonic object with well-defined physical and aerodynamic properties. Raytracing simulations incorporated atmospheric specifications from the ground-2-space model to estimate source altitudes for observed signals. Results confirmed ballistic arrivals at all stations, with source altitudes ranging from 44 to 62 km along the trajectory. Signal period and amplitude exhibited strong dependence on source altitude, with higher altitudes corresponding to lower amplitudes, longer periods, and reduced high-frequency content. Regression analysis demonstrated strong correlations between signal characteristics and both altitude and propagation geometry. Our results suggest, when attenuation is considered, the amplitude is primarily determined by the source, with the propagation path playing a secondary role over the distances examined. These findings emphasize the utility of controlled SRC re-entries for advancing our understanding of natural meteoroid dynamics, refining atmospheric entry models, and improving methodologies for planetary defense. The OSIRIS-REx SRC campaign represents the most comprehensive infrasound study of a hypersonic re-entry to date, showcasing the potential of coordinated geophysical observational networks for high-energy atmospheric phenomena, including space debris re-entries.

58 GEOSCIENCES↗

Anatomy of Continuous Mars SEIS and Pressure Data from Unsupervised Learning

The seismic noise recorded by the Interior Exploration using Seismic Investigations, Geodesy, and Heat Transport (InSight) seismometer (Seismic Experiment for Interior Structure [SEIS]) has a strong daily quasi-periodicity and numerous transient microevents, associated mostly with an active Martian environment with wind bursts, pressure drops, in addition to thermally induced lander and instrument cracks. That noise is far from the Earth’s microseismic noise. Quantifying the importance of nonstochasticity and identifying these microevents is mandatory for improving continuous data quality and noise analysis techniques, including autocorrelation. Cataloging these events has so far been made with specific algorithms and operator’s visual inspection. We investigate here the continuous data with an unsupervised deep-learning approach built on a deep scattering network. This leads to the successful detection and clustering of these microevents as well as better determination of daily cycles associated with changes in the intensity and color of the background noise. We first provide a description of our approach, and then present the learned clusters followed by a study of their origin and associated physical phenomena. We show that the clustering is robust over several Martian days, showing distinct types of glitches that repeat at a rate of several tens per sol with stable time differences. We show that the clustering and detection efficiency for pressure drops and glitches is comparable to or better than manual or targeted detection techniques proposed to date, noticeably with an unsupervised approach. Finally, here we discuss the origin of other clusters found, especially glitch sequences with stable time offsets that might generate artifacts in autocorrelation analyses. We conclude with presenting the potential of unsupervised learning for long-term space mission operations, in particular, for geophysical and environmental observatories.

58 GEOSCIENCES↗

Methane emission hotspots in a boreal forest-fen mosaic potentially linked to deep taliks

Permafrost thaw is transforming boreal forests into mosaics of wetlands and drier uplands. Topographic controls on hydrological and ecological conditions impact methane (CH 4 ) fluxes, contributing to uncertainty in local and regional CH 4 budgets and underlying drivers. The objective of this study was to explore CH 4 fluxes and their drivers in a transitioning boreal forest-fen ecosystem (Goldstream Valley, Alaska, USA). This landscape is characterized by thawing discontinuous permafrost and heterogeneous mosaics of fens, collapse-scar channels, and small mounds of permafrost soils. From a survey in July 2021, observed chamber CH4 fluxes included fen areas with intermediate to very high emissions (29.8–635.3 mg CH 4 m −2 d −1 ), clustered locations with CH 4 uptake (−2.11 to −0.7 mg CH 4 m −2 d −1 ), and three anomalous emission hotspots (342.4–772.4 mg CH 4 m −2 d −1 ) that were located near samples with lower emissions. Some surface and near-surface variables partially explained the spatial variation in CH 4 flux. Log-transformed CH 4 flux had a positive linear relationship with soil moisture at 20 cm depth ( R 2 = 0.31, p -value < 1e-5) and negative linear relationships with microtopography ( R 2 = 0.13, p -value < 0.006) and slope ( R 2 = 0.28, p -value < 2e-5). Methane emissions generally occurred in flat, wet, graminoid-dominated fens, whereas CH 4 uptake occurred on permafrost mounds dominated by feather mosses and woody vegetation. However, the CH 4 hotspots occurred on drier, slightly sloped locations with low or undetectable near-surface methanogen abundance, suggesting that CH 4 was produced in deeper soils. When the hotspot samples were omitted, log-transformed CH 4 flux had a positive linear relationship with near-surface methanogen abundance ( R 2 = 0.29, p -value = 0.0023), and stronger linear relationships with soil moisture, slope, and soil macronutrient concentrations. Our findings suggest that some CH 4 emission hotspots could arise from CH 4 in deep taliks. The inference that methanogenesis occurs in deep taliks was strengthened by the identification of intrapermafrost taliks across the study area using low-frequency geophysical induction. This study assesses surface spatial heterogeneity in the context of subsurface permafrost conditions and highlights the complexity of CH 4 flux patterns in transitioning forest-wetland ecosystems. To better inform regional CH 4 budgets, further research is needed to understand the spatial distribution of terrestrial CH 4 hotspots and to resolve their surface, near-surface, and subsurface drivers.

boreal↗

Pore characterization of the Marcellus Shale by nitrogen adsorption and prediction of its gas storage capacity

In a shale gas reservoir, pore characterization is an important factor used to determine gas storage capacity. However, the nanometer (nm)-scale pore system in shale is difficult to explore by traditional optical, scanning electron microscopy, or even nuclear magnetic resonance well logging. We have investigated the pore structure and storage capacity of the Marcellus Shale through integration of petrophysical analysis from laboratory and well-logging data and nitrogen adsorption. The isotherm of Marcellus Shale is a composite isotherm, which has features of type I, type II, and type IV isotherms with type H4 of the hysteresis loop, suggesting slit-like pores developed in the Marcellus Shale. Quantitative analysis of pore volumes from the nitrogen adsorption indicates that density porosity may be more properly used to approximate the shale porosity and estimate the shale gas volume. In addition, the specific surface area, micropore, and mesopore volumes have a positive relationship with the kerogen volume and total organic content (TOC). By using the Langmuir and Brunauer-Emmet-Teller models, the simulated result indicates that the higher adsorbed quantity of the Marcellus Shale could be the result of the increase of micropore volume contributed, by the increase of kerogen or TOC content. The proposed equations rapidly compute TOC, a key parameter to predict gas storage capacity in overmature shale such as the Marcellus Shale.

Geochemistry & Geophysics↗

Modeling Sequences of Earthquakes and Aseismic Slip (SEAS) in Elasto-Plastic Fault Zones With a Hybrid Finite Element Spectral Boundary Integral Scheme

We present a coupled finite element spectral boundary integral framework for modeling sequences of earthquakes and aseismic slip on a 2-D planar rate-and-state fault with off-fault visco-plastic response in the plane strain approximation. The model resolves both slow aseismic deformation and inertia effects during rapid slip. As an application, we perform two sets of simulations with different choices of cohesion to explore the co-evolution of fault slip, bulk plasticity and local stress fields. The first set implements a relatively large value of the cohesion parameter, which results in limiting inelastic strain accumulation to dynamic rupture phases. The second set implements a smaller cohesion, allowing for plastic strain to accumulate in both seismic and aseismic phases. For the first model, our results indicate that the extent and distribution of plastic strain depend on the angle of maximum compressive principal stress. At larger angles, inelastic strain accumulates on the extensional side of a dynamically propagating rupture. At smaller angles, the extent of plasticity is limited to the compressional side of the domain. At smaller cohesion values, off-fault plasticity may occur during aseismic slip, which alters the nucleation characteristics and earthquake sequence pattern. Furthermore, our results at lower cohesion values indicate that plastic strain accumulation may occur in both the extensional and compressional sides of the off-fault bulk even at higher angles of maximum compression. In conclusion, this produces damage patterns that deviate from the traditional off-fault fan-like distribution observed in dynamic rupture simulations and emphasizes the significance of long-term deformation in interpreting observations.

58 GEOSCIENCES↗

Dual origin of ferropericlase inclusions within super-deep diamonds

Ferropericlase [(Mg,Fe)O] is one of the major constituents of Earth's lower mantle and the most abundant mineral inclusion in sub-lithospheric diamonds. Although a lower mantle origin for ferropericlase inclusions has often been suggested, some studies have proposed that many of these inclusions may instead form at much shallower depths, in the deep upper mantle or transition zone. No straightforward method exists to discriminate ferropericlase of lower-mantle origin without characteristic mineral associations, such as co-existing former bridgmanite. To explore ferropericlase-diamond growth relationships, we have investigated the crystallographic orientation relationships (CORs), determined by single-crystal X-ray diffraction, between 57 ferropericlase inclusions and 37 diamonds from Juina (Brazil) and Kankan (Guinea). We show that ferropericlase inclusions can develop specific (16 inclusions in 12 diamonds), rotational statistical (9 inclusions in 7 diamonds) and random (32 inclusions in 25 diamond) CORs with respect to their diamond hosts. All measured inclusions showing a specific COR were found to be Fe-rich (X FeO > 0.30). Coexistence of non-randomly and randomly oriented ferropericlase inclusions within the same diamond indicates that their CORs may be variably affected by local growth conditions. However, the occurrence of specific CORs only for Fe-rich inclusions indicates that Fe-rich ferropericlases have a distinct genesis and are syngenetic with their host diamonds. In conclusion, this result provides strong support for a dual origin for ferropericlase in Earth's mantle, with Fe-rich compositions likely indicating redox growth in the upper mantle, while more Mg-rich compositions with random COR mostly representing ambient lower mantle trapped as protogenetic inclusions.

58 GEOSCIENCES↗

Methane Hydrate Formation and Evolution During Sedimentation

We explored methane hydrate formation with sedimentation with a newly developed one-dimensional, multiphase flow, multicomponent transport numerical model. Our model couples methane hydrate formation from in situ microbial methane generation within the hydrate stability zone (HSZ), methane recycling, and microbial methane generation below the base of the hydrate stability zone (BHSZ). Both recycled methane and deeply generated methane are transported into the HSZ by buoyancy-driven free gas flow. Free gas flows through the HSZ by both the processes of capillary-dependent pore fillings and by salt exclusion during hydrate formation, with the former being the dominant mechanism. We quantitively illustrated the formation of enriched hydrate in muddy sediments above, and interconnected free gas below, the BHSZ, which are common features along the world's continental margin. In addition, we showed two ways to form concentrated methane hydrate above the BHSZ. The first mechanism is local free gas flow during methane recycling. This happens at sites with sufficient methane generation above the BHSZ. The second mechanism is deep microbial methane generation which is transported into the HSZ by free gas flow. This mechanism plays a more important role at sites with high sedimentation rates. This study provides new insights into methane hydrate formation and distribution below the seafloor. It is important for understanding the carbon cycle and carbon storage below the seafloor and for resource evaluation and exploitation.

58 GEOSCIENCES↗

3-D Geologic Controls of Hydrothermal Fluid Flow at Brady Geothermal Field, Nevada using PCA

In many hydrothermal systems, fracture permeability along faults provides pathways for groundwater to transport heat from depth. Faulting generates a range of deformation styles that cross-cut heterogeneous geology, resulting in complex patterns of permeability, porosity, and hydraulic conductivity. Vertical connectivity (a through going network of permeable areas that allows advection of heat from depth to the shallow subsurface) is rare and is confined to relatively small volumes that have highly variable spatial distribution. This local compartmentalization of connectivity represents a significant challenge to understanding hydrothermal circulation and for exploring, developing, and managing hydrothermal resources. Here, we present an evaluation of the geologic characteristics that control this compartmentalization in hydrothermal systems through 3-D analysis of the Brady geothermal field in western Nevada. A published 3-D geologic map of the Brady area is used as a basis to develop structural and geological variables that are hypothesized to control or effect permeability or connectivity. The 3-D distribution of these variables is compared to the distribution of productive and non-productive fluid flow intervals along production wells and non-productive wells via principal component analysis (PCA). This comparison elucidates which geologic and structural variables are most closely associated with productive fluid flow intervals. Results indicate that production intervals at Brady are located: (1) within or near to known and stress-loaded macro-scale faults, and (2) in areas of high fault and fracture density. This submission includes the published journal article detailing this work, the published 3-D geologic map of the Brady Geothermal Area used as a basis to develop structural and geological variables that are hypothesized to control or effect permeability or connectivity, 3-D well data, along which geologic data were sampled for PCA analyses, and associated metadata file. This work was done using existing R programs.

15 GEOTHERMAL ENERGY↗

Investigating Soil Organic Matter Complexation using Spectral Induced Polarization

Spectral induced polarization (SIP) laboratory experiments were conducted to determine the sensitivity of this method to the formation of soil organic matter (SOM) complexes, with a long-term goal of field-scale monitoring. There are few SIP experiments that have explored this topic, yet understanding the dynamic behavior and interactions of SOM at the field scale could provide insight into soil fertility and health which influences crop yields, microorganisms that degrade organic pollutants, and carbon stabilization. We present the results of three experiments where the iron oxide, ferrihydrite (Fhy), was used to coat different media, and then the OM compound pentaglycine (PG) was pulse injected to form SOM complexes. SIP data was collected during these injections to capture any surface complexation changes. These experiments were performed in 1) a fluidic cell containing a micromodel, 2) a column containing Fhy coated ceramic beads and 3) a column containing Fhy coated Accusand®. Our results show a higher frequency response (defined here as > 1 Hz) in all three experiments, with the largest amplitude response after the first PG injection (Figure S.1). The repeatability of this response is encouraging and supporting data collected on the Accusand® experiment provides preliminary insight into the mechanisms controlling the SIP signatures. Sampling of fluid conductivity $σ_w$ and pH may indicate deprotonation of SOM occurring or rapid adsorption and release of protons from the Fhy sites. However additional experiments are needed to identify and confirm the primary and secondary reactions impacting the SIP response. We are looking towards other opportunities to continue this work, particularly to repeat experiments while collecting supporting datasets.

58 GEOSCIENCES↗

From Lake to River: Documenting an Environmental Transition Across the Jura/Knockfarril Hill Members Boundary in the Glen Torridon Region of Gale Crater (Mars)

Between January 2019 and January 2021, the Mars Science Laboratory team explored the Glen Torridon (GT) region in Gale crater (Mars), known for its orbital detection of clay minerals. Mastcam, Mars Hand Lens Imager, and ChemCam data are used in an integrated sedimentological and geochemical study to characterize the Jura member of the upper Murray formation and the Knockfarril Hill member of the overlying Carolyn Shoemaker formation in northern GT. The studied strata show a progressive transition represented by interfingering beds of fine–grained, recessive mudstones of the Jura member and coarser–grained, cross–stratified sandstones attributed to the Knockfarril Hill member. Whereas the former are interpreted as lacustrine deposits, the latter are interpreted as predominantly fluvial deposits. The geochemical composition seen by the ChemCam instrument show K 2 O–rich mudstones (~1–2 wt.%) versus MgO–rich sandstones (>6 wt.%), relative to the average composition of the underlying Murray formation. We document consistent sedimentary and geochemical data sets showing that low–energy mudstones of the Jura member are associated with the K–rich endmember, and that high–energy cross–stratified sandstones of the Knockfarril Hill member are associated with the Mg–rich endmember, regardless of stratigraphic position. The Jura to Knockfarril Hill transition therefore marks a significant paleoenvironmental change, where a long–lived and comparatively quiescent lacustrine setting progressively changes into a more energetic fluvial setting, as a consequence of shoreline regression due to either increased sediment supply or lake–level drop.

58 GEOSCIENCES↗

Ca-isotopes as a robust tracer of magmatic differentiation

The large mass difference (~10%) between the two most abundant isotopes of calcium, 40 Ca and 44 Ca, gives Ca great potential in tracking mass-dependent fractionation during magmatic processes. Resolvable Ca-isotope fractionation during fractional crystallization of magma, particularly by feldspar in evolved melts, has been theoretically inferred but not robustly tested in nature. To further explore the effects of magmatic differentiation on Ca-isotope systematics, we studied the late-Permian alkaline igneous suite of the Øyangen Caldera, Oslo Rift, Norway, consisting of volcanic and intrusive units ranging from basanitic to rhyolitic compositions. Major and trace element variations and modeling demonstrate that the main series of samples (N = 21), including basanites, ring-dyke syenites, and central-dome syenites, likely documents a co-genetic and closed-system fractional crystallization sequence. Our data show minimal δ 44/40 Ca variation (< 0.05 ‰) in the intermediate magma and a marked increase in δ 44/40 Ca in the felsic magma of the Øyangen Caldera (from 0.62 ± 0.02 ‰ to 1.15 ± 0.03 ‰ relative to Ca standard, SRM915a). The systematic increase is best explained by equilibrium isotopic fractionation dominated by alkali feldspar in the fractionating mineral assemblage. This is further supported by strong correlations between δ 44/40 Ca, CaO, and Eu/Eu* in the main-series samples. Implementing a Monte Carlo approach, isotopic modeling of the liquid line of descent using Rayleigh fractionation is highly consistent with the observed Ca-isotope evolution. For the first time, we confirm prominent Ca stable isotope fractionation in felsic-stage differentiation of alkaline magma and constrain the isotope fractionation factors of plagioclase and K-feldspar. Integrated with extant estimations on mineral fractionation factors from the literature, our results suggest increasing fractionation effects of rock-forming minerals with decreasing Ca content. Finally, the affirmation of significant Ca-isotope fractionation in alkaline magma by feldspar empowers the application of Ca as a versatile tracer of crustal evolution, allowing further tests in other magmatic conditions across various planetary objects.

58 GEOSCIENCES↗

The Curiosity Rover's Exploration of Glen Torridon, Gale Crater, Mars: An Overview of the Campaign and Scientific Results

The Mars Science Laboratory rover, Curiosity, explored the clay mineral-bearing Glen Torridon region for 1 Martian year between January 2019 and January 2021, including a short campaign onto the Greenheugh pediment. The Glen Torridon campaign sought to characterize the geology of the area, seek evidence of habitable environments, and document the onset of a potentially global climatic transition during the Hesperian era. Curiosity roved 5 km in total throughout Glen Torridon, from the Vera Rubin ridge to the northern margin of the Greenheugh pediment. Curiosity acquired samples from 11 drill holes during this campaign and conducted the first Martian thermochemolytic-based organics detection experiment with the Sample Analysis at Mars instrument suite. The lowest elevations within Glen Torridon represent a continuation of lacustrine Murray formation deposits, but overlying widespread cross bedded sandstones indicate an interval of more energetic fluvial environments and prompted the definition of a new stratigraphic formation in the Mount Sharp group called the Carolyn Shoemaker formation. Glen Torridon hosts abundant phyllosilicates yet remains compositionally and mineralogically comparable to the rest of the Mount Sharp group. Glen Torridon samples have a great diversity and abundance of sulfur-bearing organic molecules, which are consistent with the presence of ancient refractory organic matter. The Glen Torridon region experienced heterogeneous diagenesis, with the most striking alteration occurring just below the Siccar Point unconformity at the Greenheugh pediment. Results from the pediment campaign show that the capping sandstone formed within the Stimson Hesperian aeolian sand sea that experienced seasonal variations in wind direction.

58 GEOSCIENCES↗

The importance of accounting for landscape position when investigating grasslands: A multidisciplinary characterisation of a Californian coastal grassland

Data from the characterisation of the Point Reyes Field Site, published in AGU Earth's Future under the title: The importance of accounting for landscape position when investigating grasslands: A multidisciplinary characterisation of a Californian coastal grassland. This paper explored the effect of landscape position on the response of a Californian grassland to seasonal changes. All files are csv files. The EMI data contains 8 csv files with a metadata csv explaining the columns. The dataset also includes soil variables including total concentrations calculated from fused samples, then dissolved and measured on ICP-AES for whole-rock elements and ICP-MS for trace elements. Mineral composition was attained using X-ray diffraction at BL 11-3 at SSRL . Data was then run through the High Score database to characterise different mineral phases. total It also includes a table with bulk soil characteristics such as soil pH, cation exchange capacity, and soil textural data. Data from Teros 12 Meter soil moisture, electrical conductivity and temperature sensors are presented in SMS Csv file. While the WL bottom and top files contain data from Piezometers measuring the ground water table. We have included a csv file that contains soil CO2 efflux data from Feb 2021-Oct 2021 in the Point Reyes Grassland Experiment We have included the spatially orientated (easting northing) remotely sensed datasets that were used in the K-means clustering analysis conducted on our site with electrical conductivity, normalised difference vegetation index, elevation, slope, solar radiation, topographic position and wetness index, and a clustering score. Finally there is a list of all the identified grassland species at the site.For more information on flux data, please contact the corresponding author.

54 ENVIRONMENTAL SCIENCES↗

Past fires and post-fire impacts reconstructed from a southwest Australian stalagmite

Speleothem records of past environmental change provide an important opportunity to explore fire frequency and intensity in the past, and the antecedent climatic conditions leading to fire events. Here, fire sensitive geochemical signals in a stalagmite from Yonderup Cave, a shallow cave in Western Australia, are compared to well-documented wildfire events that occurred in recent decades. The results are extended to identify wildfires during the growth interval of the speleothem (1760 CE–2005 CE). Principal component analysis of the stalagmite time-series revealed distinct peaks in a combination of phosphorus and metal (aluminium, zinc, copper and lead) concentrations in response to known fire events, which are interpreted to have come from ash. Varying responses in the geochemical signal in the pre- and post-European colonisation period are likely linked to changes in land management, fire frequency and fire intensities. Of note is what we infer to be a particularly intense fire event concluded to have occurred in 1897 ± 5 CE, which climate sensitive proxies (δ18O and bedrock-derived elements) indicate was preceded by a multi-decadal dry period that began in the late 1860s. The intensity of the deduced fire event is supported by a peak in P that is 6.3 times higher than elsewhere in the speleothem, accompanied by a peak in Zn. It was also inferred that changes to the surface-cave hydrology occurred as a result of this event, indicated by increased input of colloidal organic material onto the stalagmite that was interpreted to be caused by shallow karst bedrock fracturing from the heat-induced deformation that is observed after intense fires. These findings show the potential for speleothems to provide dated records of fire intensity and recurrence intervals. Further development could lead to a better understanding of the climate-fire relationship and the effects of land-management practices on wildfire frequency and intensity.

58 GEOSCIENCES↗