SEARCH · Engineering Papers

Results for “Generative Design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

All sources NASA NTRS DOE OSTI

NASA NTRSDate not supplied

Simulation and Analysis of NASA Lift Plus Cruise eVTOL Crash Test

The National Aeronautics and Space Administration (NASA) will perform a full-scale crash test of a representative electric vertical take-off and landing (eVTOL) fuselage in November 2022. The test article is a carbon-composite fuselage cabin section of the six-passenger lift plus cruise (LPC) eVTOL design concept which was created by NASA to advance understanding of eVTOL propulsion, noise, and safety. The test will consist of impacting the fuselage cabin section onto a concrete surface with a combined horizontal and vertical velocity approximating a severe but survivable crash landing for this vehicle design. Data generated from this test will be used to inform eVTOL crashworthiness regulation development, evaluate the use of energy absorbing concepts within vehicle design, and validate finite element model (FEM) techniques used in crashworthiness predictions. The cabin section response will be evaluated using structural instrumentation, anthropometric test devices (ATDs), and high-speed photogrammetry. This study will compare pre-test FEM predictions to test results to quantify the capability of these tools to predict crashworthiness of the carbon-composite eVTOL airframe.

Crashworthiness↗

NASA NTRSDate not supplied

Simulation and Analysis of NASA Lift Plus Cruise eVTOL Crash Test

Crashworthiness↗

NASA NTRS1971

Operational procedure for computer program for design point characteristics of a compressed-air generator with through-flow combustor for V/STOL applications

The computer program described in this report calculates the design-point characteristics of a compressed-air generator for use in V/STOL applications such as systems with a tip-turbine-driven lift fan. The program computes the dimensions and mass, as well as the thermodynamic performance of a model air generator configuration which involves a straight through-flow combustor. Physical and thermodynamic characteristics of the air generator components are also given. The program was written in FORTRAN IV language. Provision has been made so that the program will accept input values in either SI units or U.S. customary units. Each air generator design-point calculation requires about 1.5 seconds of 7094 computer time for execution.

Krebs, R. P.↗

NASA NTRSDate not supplied

Spacecraft Cabin Ventilation Fan Research at NASA

NASA has recently made the geometry and solid model for a spacecraft cabin ventilation fan prototype available to the public via electronic file downloads from the NASA Technical Reports Server. This fan can be used for research and development by many organizations. The NASA Quiet Space Fan is 8.89 cm (3.50 in) in diameter, 22.9 cm (9.00 in) long, and the metal fan weighs 1.63 kg (3.6 lbm). The fan was designed to generate a system total pressure rise of 906 Pa (3.64 inches of water) at 0.709 m3/s (150.3 cfm) of airflow at 12,000 rpm (at 21.1ºC (70ºF) and 14.7 psia). Performance measured using standardized techniques showed good agreement with design and predicted values. A low-noise blade-vane count was chosen to reduce tonal noise generated by rotor-stator interaction for the first three blade passing frequency harmonics. In-duct microphone array measurements indicated that the most evident tones occur at frequencies of 1,800 Hz (1 BPF) and 7,200 Hz (4 BPF). Using reverberant room standard testing methods, the A-weighted sound power level for the fan operating at design point conditions was measured to be 71 dBA. This report describes the current set of publicly available information for this fan. The fan was designed, optimized, and tested with tools and techniques that NASA has traditionally used for turbofan engine research. This demonstrates that technology developed for aerospace applications can be used more broadly, since quiet and efficient fans are needed for many ventilation systems in spacecraft, aircraft, watercraft, land vehicles, and buildings.

fan↗

NASA NTRS1992

Formalization and visualization of domain-specific software architectures

This paper describes a domain-specific software design system based on the concepts of software architectures engineering and domain-specific models and languages. In this system, software architectures are used as high level abstractions to formulate a domain-specific software design. The software architecture serves as a framework for composing architectural fragments (e.g., domain objects, system components, and hardware interfaces) that make up the knowledge (or model) base for solving a problem in a particular application area. A corresponding software design is generated by analyzing and describing a system in the context of the software architecture. While the software architecture serves as the framework for the design, this concept is insufficient by itself for supplying the additional details required for a specific design. Additional domain knowledge is still needed to instantiate components of the architecture and develop optimized algorithms for the problem domain. One possible way to obtain the additional details is through the use of domain-specific languages. Thus, the general concept of a software architecture and the specific design details provided by domain-specific languages are combined to create what can be termed a domain-specific software architecture (DSSA).

Bailor, Paul D.↗

NASA NTRS2001

The AIRES Optical Design

AIRES (Airborne InfraRed Echelle Spectrometer) is the facility spectrometer for SOFIA (Stratospheric Observatory For Infrared Astronomy). AIRES is a long-slit (approximately 160 in) spectrometer designed to cover the 17 to 210-micron range with good sensitivity using three spectroscopic arrays. Initially, only the 30-130 micron, mid-wavelength array will be available. The instrument has a cryogenic K-mirror to perform field rotation and a slit-viewing camera (lambda < 28 microns, FOV = 160 in diameter) to image source morphology and verify telescope pointing. AIRES employs a large echelle grating to achieve a spectral resolving power (lambda/delta lambda) of approximately 1.0 x 10(exp 6)/lambda (sub mu), where lambda (sub mu) is the wavelength in microns. Hyperfine, Inc. has ruled and tested the AIRES' echelle; its wave-front error is 0.028 waves RMS (root mean square) at 10.6 microns. The instrument is housed in a liquid-helium cryostat which is constrained in diameter (approximately 1 m) and length (approximately 2 m) by the observatory. Hence, the length of the echelle (approximately 1.1 m) and the focal length of its collimator (approximately 5.2 m) severely drive the optical design and packaging. The final design uses diamond-turned aluminum optics and has up to 19 reflections inside the cryostat, depending on the optical path. This design was generated, optimized, and toleranced using Code V. The predicted performance is nearly diffraction-limited at 17 microns; the error budget is dominated by design residuals. Light loss due to slit rotation and slit curvature has been minimized. A thorough diffraction analysis with GLAD (G-Level Analysis Drawer) was used to size the mirrors and baffles; the internal light loss is shown to be a strong function of slit width.

Haas, Michael R.↗

NASA NTRS2003

Using a Genetic Algorithm to Design Nuclear Electric Spacecraft

The basic approach to to design nuclear electric spacecraft is to generate a group of candidate designs, see how "fit" the design are, and carry best design forward to the next generation. Some designs eliminated, some randomly modified and carried forward.

Pannell, William P.↗

NASA NTRS1984

Conceptual design of a fixed-pitch wind turbine generator system rated at 400 kilowatts

The design and cost aspects of a fixed pitch, 400 kW Wind Turbine Generator (WTG) concept are presented. Improvements in reliability and cost reductions were achieved with fixed pitch operation and by incorporating recent advances in WTG technology. The specifications for this WTG concept were as follows: (1) A fixed pitch, continuous wooden rotor was to be provided by the Gougeon Bros. Co. (2) An 8 leg hyperboloid tower that showed promise as a low cost structure was to be used. (3) Only commercially available components and parts that could be easily fabricated were to be considered. (4) Design features deemed desirable based on recent NASA research efforts were to be incorporated. Detailed costs and weight estimates were prepared for the second machine and a wind farm of 12 WTG's. The calculated cost of energy for the fixed pitch, twelve unit windfarm is 11.5 cents/kW hr not including the cost of land and access roads. The study shows feasibility of fixed pitch, intermediate power WTG operation.

Pintz, A.↗

NASA NTRS1987

An orbiting control station for free-flying teleoperators - Preliminary design methodology

This paper summarizes work being done to develop the preliminary design of a control station for the free-flying teleoperator/telerobot ROBIN. The four-step development process involves telerobot capability definition, mission analysis, requirements generation, and design solution. The ROBIN servomanipulator requirements are listed, and a telerobotic control station requirement tree is shown.

Clarke, M. M.↗

NASA NTRS1999

Parametric Study of Three-Stringer-Panel Compression-After-Impact Strength

Damage tolerance requirements for integrally-stiffened composite wing skins are typically met using design allowables generated by testing impact-damaged subcomponents, such as three-stringer stiffened panels. To improve these structures, it is necessary to evaluate the critical design parameters associated with three-stringer stiffened-panel compressive behavior. During recent research and development programs, four structural parameters were identified as sources for strength variation: (a) material system, (b) stringer configuration, (c) skin layup, and (d) form of axial reinforcement (tape versus pultruded carbon rods). Relative effects of these parameters on damage resistance and damage tolerance were evaluated numerically and experimentally. Material system and geometric configuration had the largest influence on damage resistance; location and extent of the damage zone influenced the sublaminate buckling behavior, failure initiation site, and compressive ultimate strength. A practical global-local modeling technique captured observed experimental behavior and has the potential to identify critical damage sites and estimate failure loads prior to testing. More careful consideration should be given to accurate simulation of boundary conditions in numerical and experimental studies.

Rousseau, Carl Q.↗

NASA NTRS2003

Generative Representations for the Automated Design of Modular Physical Robots

We will begin with a brief background of evolutionary robotics and related work, and demonstrate the scaling problem with our own prior results. Next we propose the use of an evolved generative representation as opposed to a non-generative representation. We describe this representation in detail as well as the evolutionary process that uses it. We then compare progress of evolved robots with and without the use of the grammar, and quantify the obtained advantage. Working two- dimensional and three-dimensional physical robots produced by the system are shown.

Hornby, Gregory S.↗

NASA NTRS1993

Aerodynamic analysis of hypersonic waverider aircraft

The purpose of this study is to validate two existing codes used by the Systems Analysis Branch at NASA ARC, and to modify the codes so they can be used to generate and analyze waverider aircraft at on-design and off-design conditions. To generate waverider configurations and perform the on-design analysis, the appropriately named Waverider code is used. The Waverider code is based on the Taylor-Maccoll equations. Validation is accomplished via a comparison with previously published results. The Waverider code is modified to incorporate a fairing to close off the base area of the waverider configuration. This creates a more realistic waverider. The Hypersonic Aircraft Vehicle Optimization Code (HAVOC) is used to perform the off-design analysis of waverider configurations generated by the Waverider code. Various approximate analysis methods are used by HAVOC to predict the aerodynamic characteristics, which are validated via a comparison with experimental results from a hypersonic test model.

Sandlin, Doral R.↗

NASA NTRS2019

Swirl Distortion Using Stream Vanes for Boundary Layer Ingestion Research

The swirl distortion of a StreamVane (Trademark) was investigated in the NASA Glenn Research Center W8 test facility. The StreamVane (Trademark) was designed and generated by Virginia Tech based on CFD simulations and included a center body at the aerodynamic interface plane. The swirl pattern generated by the distortion was evaluated using a dense grid of 5-hole Pitot probe measurements captured using a rotating array of probes. Good agreement was found between the design intent and the results at 38.5 kg/s mass flow. The StreamVane (Trademark) swirl results were compared to clean facility flow at 5 inlet mass flows and found to be consistent. Additionally, the axial location of the StreamVane (Trademark) relative to the measurement plane was investigated to determine the impact on downstream total pressure loss generated by the vanes. The intent of this work was to assess the viability of using a StreamVane (Trademark) to generate a Type I or Type II distortion into a Boundary Layer Ingesting propulsor to assess its aerodynamic performance and aeromechanic response.

swirl distortion↗

NASA NTRS1982

Numerical generation of composite three dimensional grids by quasilinear elliptic systems

A three-dimensional grid generation technique designed to numerically construct a boundary-conforming grid within a three-dimensional region bounded by a closed surface is described. The boundary values are generated numerically by a modified elliptic system and are used to compute grid control parameters that are contained in the elliptic systems. The interior grid distribution is governed by the distribution of points on the boundary as well as by the boundary's geometric shape. The composite three-dimensional grid remains both continuous and smooth across the surface of juncture between any two adjoining subregions. The details of the method and its implementation are presented, displaying numerical results for three-dimensional composite grid for a wing-body combination and surface grids.

Thomas, P. D.↗

NASA NTRS1988

MSAT-X: A technical introduction and status report

A technical introduction and status report for the Mobile Satellite Experiment (MSAT-X) program is presented. The concepts of a Mobile Satellite System (MSS) and its unique challenges are introduced. MSAT-X's role and objectives are delineated with focus on its achievements. An outline of MSS design philosophy is followed by a presentation and analysis of the MSAT-X results, which are cast in a broader context of an MSS. The current phase of MSAT-X has focused notably on the ground segment of MSS. The accomplishments in the four critical technology areas of vehicle antennas, modem and mobile terminal design, speech coding, and networking are presented. A concise evolutionary trace is incorporated in each area to elucidate the rationale leading to the current design choices. The findings in the area of propagation channel modeling are also summarized and their impact on system design discussed. To facilitate the assessment of the MSAT-X results, technology and subsystem recommendations are also included and integrated with a quantitative first-generation MSS design.

Dessouky, Khaled↗

NASA NTRS1989

Aircraft integrated design and analysis: A classroom experience

AAE 451 is the capstone course required of all senior undergraduates in the School of Aeronautics and Astronautics at Purdue University. During the past year the first steps of a long evolutionary process were taken to change the content and expectations of this course. These changes are the result of the availability of advanced computational capabilities and sophisticated electronic media availability at Purdue. This presentation will describe both the long range objectives and this year's experience using the High Speed Commercial Transport design, the AIAA Long Duration Aircraft design and RPV design proposal as project objectives. The central goal of these efforts is to provide a user-friendly, computer-software-based environment to supplement traditional design course methodology. The Purdue University Computer Center (PUCC), the Engineering Computer Network (ECN) and stand-alone PC's are being used for this development. This year's accomplishments center primarily on aerodynamics software obtained from NASA/Langley and its integration into the classroom. Word processor capability for oral and written work and computer graphics were also blended into the course. A total of ten HSCT designs were generated, ranging from twin-fuselage aircraft, forward swept wing aircraft to the more traditional delta and double-delta wing aircraft. Four Long Duration Aircraft designs were submitted, together with one RPV design tailored for photographic surveillance.

Weisshaar, Terrence A.↗

NASA NTRS2000

Development of an Integrated Nozzle for a Symmetric, RBCC Launch Vehicle Configuration

The development of rocket based combined cycle (RBCC) engines is highly dependent upon integrating several different modes of operation into a single system. One of the key components to develop acceptable performance levels through each mode of operation is the nozzle. It must be highly integrated to serve the expansion processes of both rocket and air-breathing modes without undue weight, drag, or complexity. The NASA GTX configuration requires a fixed geometry, altitude-compensating nozzle configuration. The initial configuration, used mainly to estimate weight and cooling requirements was a 1 So half-angle cone, which cuts a concave surface from a point within the flowpath to the vehicle trailing edge. Results of 3-D CFD calculations on this geometry are presented. To address the critical issues associated with integrated, fixed geometry, multimode nozzle development, the GTX team has initiated a series of tasks to evolve the nozzle design, and validate performance levels. An overview of these tasks is given. The first element is a design activity to develop tools for integration of efficient expansion surfaces With the existing flowpath and vehicle aft-body, and to develop a second-generation nozzle design. A preliminary result using a "streamline-tracing" technique is presented. As the nozzle design evolves, a combination of 3-D CFD analysis and experimental evaluation will be used to validate the design procedure and determine the installed performance for propulsion cycle modeling. The initial experimental effort will consist of cold-flow experiments designed to validate the general trends of the streamline-tracing methodology and anchor the CFD analysis. Experiments will also be conducted to simulate nozzle performance during each mode of operation. As the design matures, hot-fire tests will be conducted to refine performance estimates and anchor more sophisticated reacting-flow analysis.

Smith, Timothy D.↗

NASA NTRS2004

The Geostationary Operational Environmental Satellite (GOES) Product Generation System

The Geostationary Operational Environmental Satellite (GOES) Product Generation System (GPGS) is introduced and described. GPGS is a set of computer programs developed and maintained at the Global Hydrology and Climate Center and is designed to generate meteorological data products using visible and infrared measurements from the GOES-East Imager and Sounder instruments. The products that are produced by GPGS are skin temperature, total precipitable water, cloud top pressure, cloud albedo, surface albedo, and surface insolation. A robust cloud mask is also generated. The retrieval methodology for each product is described to include algorithm descriptions and required inputs and outputs for the programs. Validation is supplied where applicable.

Haines, S. L.↗