Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Filter error”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Skylab S-193 radar altimeter experiment analyses and results

The design of optimum filtering procedures for geoid recovery is discussed. Statistical error bounds are obtained for pointing angle estimates using average waveform data. A correlation of tracking loop bandwidth with magnitude of pointing error is established. The impact of ocean currents and precipitation on the received power are shown to be measurable effects. For large sea state conditions, measurements of sigma 0 deg indicate a distinct saturation level of about 8 dB. Near-nadir less than 15 deg values of sigma 0 deg are also presented and compared with theoretical models. Examination of Great Salt Lake Desert scattering data leads to rejection of a previously hypothesized specularly reflecting surface. Pulse-to-pulse correlation results are in agreement with quasi-monochromatic optics theoretical predictions and indicate a means for estimating direction of pointing error. Pulse compression techniques for and results of estimating significant waveheight from waveform data are presented and are also shown to be in good agreement with surface truth data. A number of results pertaining to system performance are presented.

Brown, G. S.↗

ALT space shuttle barometric altimeter altitude analysis

The accuracy was analyzed of the barometric altimeters onboard the space shuttle orbiter. Altitude estimates from the air data systems including the operational instrumentation and the developmental flight instrumentation were obtained for each of the approach and landing test flights. By comparing the barometric altitude estimates to altitudes derived from radar tracking data filtered through a Kalman filter and fully corrected for atmospheric refraction, the errors in the barometric altitudes were shown to be 4 to 5 percent of the Kalman altitudes. By comparing the altitude determined from the true atmosphere derived from weather balloon data to the altitude determined from the U.S. Standard Atmosphere of 1962, it was determined that the assumption of the Standard Atmosphere equations contributes roughly 75 percent of the total error in the baro estimates. After correcting the barometric altitude estimates using an average summer model atmosphere computed for the average latitude of the space shuttle landing sites, the residual error in the altitude estimates was reduced to less than 373 feet. This corresponds to an error of less than 1.5 percent for altitudes above 4000 feet for all flights.

Killen, R.↗

Development of advanced techniques for rotorcraft state estimation and parameter identification

An integrated methodology for rotorcraft system identification consists of rotorcraft mathematical modeling, three distinct data processing steps, and a technique for designing inputs to improve the identifiability of the data. These elements are as follows: (1) a Kalman filter smoother algorithm which estimates states and sensor errors from error corrupted data. Gust time histories and statistics may also be estimated; (2) a model structure estimation algorithm for isolating a model which adequately explains the data; (3) a maximum likelihood algorithm for estimating the parameters and estimates for the variance of these estimates; and (4) an input design algorithm, based on a maximum likelihood approach, which provides inputs to improve the accuracy of parameter estimates. Each step is discussed with examples to both flight and simulated data cases.

Hall, W. E., Jr.↗

Earth rotation from lunar laser ranging

The rotational orientation (Universal Time and the variation of latitude at McDonald Observatory, Texas) of the earth has been determined between mid 1970 and mid 1982 from McDonald Observatory lunar laser ranging (LLR) data. Universal Time, UT1, is calculated and supplied in three forms, the raw daily decomposition values, the Gaussian filtered values and the Fourier smoothed values. Formal error estimates are available for all three types. LLR can calculate corrections to one component of polar motion, the variation of latitude at McDonald Observatory. Modelling improvements have been applied here and a significant drop is seen in the residuals. The rms weighted residual for the entire thirteen year data span (3,326 'normal' points acquired between August 1969 and May 1982) is 18.7 cm.

Dickey, J. O.↗

The application of the detection filter to aircraft control surface and actuator failure detection and isolation

The performance of the detection filter in detecting and isolating aircraft control surface and actuator failures is evaluated. The basic detection filter theory assumption of no direct input-output coupling is violated in this application due to the use of acceleration measurements for detecting and isolating failures. With this coupling, residuals produced by control surface failures may only be constrained to a known plane rather than to a single direction. A detection filter design with such planar failure signatures is presented, with the design issues briefly addressed. In addition, a modification to constrain the residual to a single known direction even with direct input-output coupling is also presented. Both the detection filter and the modification are tested using a nonlinear aircraft simulation. While no thresholds were selected, both filters demonstrated an ability to detect control surface and actuator failures. Failure isolation may be a problem if there are several control surfaces which produce similar effects on the aircraft. In addition, the detection filter was sensitive to wind turbulence and modeling errors.

Bonnice, W. F.↗

Earth rotation as a proxy for interannual variability in atmospheric circulation, 1860-present

Modern atmospheric and geodetic data sets have demonstrated that changes in the axial component of the atmosphere's angular momentum and in the rotation rate of the solid earth are closely coupled on time scales of up to several years. The feasibility of using a historical record of the earth's rotation as a proxy for year-to-year changes in the zonal wind field over the globe is examined. The bulk of the earth rotation series acquired for this purpose is based on telescopic observations of the occultation of stars by the moon; semiannual values of changes in the length of day derived from these observations have acceptably small errors from about 1860 onwards. These values are filtered to remove decade-scale fluctuations, which are driven primarily by nonatmospheric processes, and the resulting proxy series is examined to see if it contains a signal associated with one of the major modes of interannual variability in the atmosphere, namely that due to the El Nino/Southern Oscillation (ENSO). According to tests of statistical significance, such a signal is present in the historical earth rotation series, in that the day is typically longer during the year following an ENSO oceanic warm event than otherwise. Therefore other signals of interannual variability in the proxy series are considered. In particular, it is inferred that noteworthy trends in atmospheric interannual variability have occurred over the last century; for example, the decade of the 1920s was marked by much larger year-to-year changes in the zonal circulation over the globe than that of the 1940s. Based on modern atmospheric data, it is suggested that most of these circulation changes have resulted from anomalies in the region between 30 deg N and 30 deg S.

Salstein, David A.↗

Effect of model uncertainty on failure detection - The threshold selector

The performance of all failure detection, isolation, and accomodation (DIA) algorithms is influenced by the presence of model uncertainty. A unique framework is presented to incorporate a knowledge of modeling error in the analysis and design of failure detection systems. The tools being used are very similar to those in robust control theory. A concept is introduced called the threshold selector, which is a nonlinear inequality whose solution defines the set of detectable sensor failure signals. The threshold selector represents an innovative tool for analysis and synthesis of DIA algorithms. It identifies the optimal threshold to be used in innovations-based DIA algorithms. The optimal threshold is shown to be a function of the bound on modeling errors, the noise properties, the speed of DIA filters, and the classes of reference and failure signals. The size of the smallest detectable failure is also determined. The results are applied to a multivariable turbofan jet engine example, which demonstrates improvements compared to previous studies.

Emami-Naeini, Abbas↗

Mode-Switching Algorithms For Antenna Servocontroller

New algorithms proposed to reduce acceleration and velocity perturbations caused by transitions between control modes of servocontrol system. Consists of position-control loop closed around rate (velocity)-control loop. Rate loop analog type-1 controller. Rate command (voltage) from position-loop controller compared to filtered tachometer feedback rate (voltage) to create rate error. Rate loop adjusts actuator-command signal to null rate error, causing antenna to turn at commanded rates.

Nickerson, Jack A.↗

Optimization of an optically implemented on-board FDMA demultiplexer

Performance of a 30 GHz frequency division multiple access (FDMA) uplink to a processing satellite is modelled for the case where the onboard demultiplexer is implemented optically. Included in the performance model are the effects of adjacent channel interference, intersymbol interference, and spurious signals associated with the optical implementation. Demultiplexer parameters are optimized to provide the minimum bit error probability at a given bandwidth efficiency when filtered QPSK modulation is employed.

Fargnoli, J.↗

Suppression of biodynamic interference in head-tracked teleoperation

Results are reported from an experimental simulation study examining improvements achievable in pointing and tracking precision using dynamic display shifting in helmet-mounted displays. The experiment was conducted in a 6-deg-of-freedom motion base simulator with an emulated helmet-mounted sight. It is shown that, for tracking tasks involving continuously moving targets, improvements of up to 70 percent can be achieved in percent on-target dwelling time and of up to 35 percent in rms tracking error, with the adaptive plus low-pass filter configuration. The results with the same filter configuration for the task of capturing randomly positioned, stationary targets show an increase of up to 340 percent in the number of targets captured and an improvement of up to 24 percent in the average capture time. The adaptive plus low-pass filter combination is considered to exhibit the best overall display dynamics by each of the subjects.

Lifshitz, S.↗

Signal processing for airborne doppler radar detection of hazardous wind shear as applied to NASA 1991 radar flight experiment data

Radar data collected during the 1991 NASA flight tests have been selectively analyzed to support research directed at developing both improved as well as new algorithms for detecting hazardous low-altitude windshear. Analysis of aircraft attitude data from several flights indicated that platform stability bandwidths were small compared to the data rate bandwidths which should support an assumption that radar returns can be treated as short time stationary. Various approaches at detection of weather returns in the presence of ground clutter are being investigated. Non-coventional clutter rejection through spectrum mode tracking and classification algorithms is a subject of continuing research. Based upon autoregressive modeling of the radar return time sequence, this approach may offer an alternative to overcome errors in conventional pulse-pair estimates. Adaptive filtering is being evaluated as a means of rejecting clutter with emphasis on low signal-to-clutter ratio situations, particularly in the presence of discrete clutter interference. An analysis of out-of-range clutter returns is included to illustrate effects of ground clutter interference due to range aliasing for aircraft on final approach. Data are presented to indicate how aircraft groundspeed might be corrected from the radar data as well as point to an observed problem of groundspeed estimate bias variation with radar antenna scan angle. A description of how recorded clutter return data are mixed with simulated weather returns is included. This enables the researcher to run controlled experiments to test signal processing algorithms. In the summary research efforts involving improved modelling of radar ground clutter returns and a Bayesian approach at hazard factor estimation are mentioned.

Baxa, Ernest G., Jr.↗

Developments of new force reflecting control schemes and an application to a teleoperation training simulator

Two schemes of force reflecting control, position-error based force reflection and low-pass-filtered force reflection, both combined with shared compliance control, were developed for dissimilar master-slave arms. These schemes enabled high force reflection gains, which were not possible with a conventional scheme when the slave arm was much stiffer than the master arm. The experimental results with a peg-in-hole task indicated that the newly force reflecting control schemes combined with compliance control resulted in best task performances. As a related application, a simulated force reflection/shared compliance control teleoperation trainer was developed that provided the operator with the feel of kinesthetic force virtual reality.

Kim, Won S.↗

SAGE (version 5.96) Ozone Trends in the Lower Stratosphere

Ozone retrievals from Stratospheric Aerosol and Gas Experiment (SAGE) II version 5.96 (v5.96) below approx. 25 km altitude are discussed. This version of the algorithm includes improved constraints on the wavelength dependence of aerosol extinctions based on the ensemble of aerosol size distribution measurements. This results in a reduction of SAGE ozone errors in the 2 years after the Mount Pinatubo eruption. However, SAGE ozone concentrations are still approx. 10% larger than ozonesonde and Halogen Occultation Experiment (HALOE) measurements below 20 km altitude under nonvolcanic conditions (and by more than this in the tropics). The analysis by Steele and Turco suggests that the SAGE ozone overpredictions are in the wrong direction to be explained by aerosol extinction extrapolation errors. Moreover, preliminary SAGE 11 v6.0a retrievals suggest that they are partially accounted for by geometric difficulties at low altitudes in v5.96 and prior retrievals. SAGE ozone trends for the 1979-1996 and 1984-1996 periods are calculated and compared, and the sources of trend errors are discussed. These calculations are made after filtering out ozone data during periods of high, local aerosol extinctions. In the lower stratosphere, below approx. 28 km altitude, there is shown to be excellent agreement in the altitudinal structure of ozone decreases at 45 deg N between SAGE and ozonesondes with the largest decrease in both between 1979 and 1996 having occurred below 20 km altitude, amounting to 0.9 +/- 0.7% yr (2sigma) at 16 km altitude. However, in contrast to the fairly steady decreases at 45 deg N, both SAGE measurements and Lauder ozonesondes show ozone increases at 45 deg S over the period from the mid-1980s to 1996 of 0.2 +/- 0.5%/yr (2sigma) from 15 to 20 km altitude. The SAGE data suggest that this increase is a wintertime phenomenon which occurs in the 15-20 km height range. Changes in dynamics are suggested as the most likely cause of this increase. These hemispheric differences in ozone trends are supported by ozone column measurements by the Total Ozone Mapping Spectrometer (TOMS).

Cunnold, D. M.↗

Unsymmetrical QPSK demodulator

The present invention is a demodulator for demodulating an unsymmetrical QPSK signal (1), i.e., one in which the amplitudes of the I and Q channels are different, and the I and Q channels have been modulated by signals having differnt bit rates. Analog versions of the I and Q modulating baseband signals are first extracted from the carrier. Each baseband signal is then subjected to a bit-rate-matched low pass filter (23, 13). The channel having the higher bit rate is subjected to a delay (32) to time-align the two baseband signals. The time-aligned filtered signals are then amplified by amplifiers (22, 12) having unequal gains that are preselected to substantially equalize the amplifier (22, 12) outputs. The amplified time-aligned filtered signals are then subjected to a phase error (E) generating means (15, 25, 16, 26, 34). The phase error (E) is passed through a loop integrator (38) and a VCO (30) and back to the baseband signal extracting means to complete a phase lock loop. Frequency searching means (40), frequency lock detect means (42, 44), and AGC control ( 46, 8) are optionally present.

Guyer, Edward↗

Evaluating the Utility of Remotely-Sensed Soil Moisture Retrievals for Operational Agricultural Drought Monitoring

Soil moisture is a fundamental data source used by the United States Department of Agriculture (USDA) International Production Assessment Division (IPAD) to monitor crop growth stage and condition and subsequently, globally forecast agricultural yields. Currently, the USDA IPAD estimates surface and root-zone soil moisture using a two-layer modified Palmer soil moisture model forced by global precipitation and temperature measurements. However, this approach suffers from well-known errors arising from uncertainty in model forcing data and highly simplified model physics. Here we attempt to correct for these errors by designing and applying an Ensemble Kalman filter (EnKF) data assimilation system to integrate surface soil moisture retrievals from the NASA Advanced Microwave Scanning Radiometer (AMSR-E) into the USDA modified Palmer soil moisture model. An assessment of soil moisture analysis products produced from this assimilation has been completed for a five-year (2002 to 2007) period over the North American continent between 23degN - 50degN and 128degW - 65degW. In particular, a data denial experimental approach is utilized to isolate the added utility of integrating remotely-sensed soil moisture by comparing EnKF soil moisture results obtained using (relatively) low-quality precipitation products obtained from real-time satellite imagery to baseline Palmer model runs forced with higher quality rainfall. An analysis of root-zone anomalies for each model simulation suggests that the assimilation of AMSR-E surface soil moisture retrievals can add significant value to USDA root-zone predictions derived from real-time satellite precipitation products.

Bolten, John D.↗

NASA Tech Briefs, August 2005

Topics include: Hidden Identification on Parts: Magnetic Machine-Readable Matrix Symbols; System for Processing Coded OFDM Under Doppler and Fading; Multipurpose Hyperspectral Imaging System; Magnetic-Flux-Compensated Voltage Divider; High-Performance Satellite/Terrestrial-Network Gateway; Internet-Based System for Voice Communication With the ISS; Stripline/Microstrip Transition in Multilayer Circuit Board; Dual-Band Feed for a Microwave Reflector Antenna; Quadratic Programming for Allocating Control Effort; Range Process Simulation Tool; Simulator of Space Communication Networks; Computing Q-D Relationships for Storage of Rocket Fuels; Contour Error Map Algorithm; Portfolio Analysis Tool; Glass Frit Filters for Collecting Metal Oxide Nanoparticles; Anhydrous Proton-Conducting Membranes for Fuel Cells; Portable Electron-Beam Free-Form Fabrication System; Miniature Laboratory for Detecting Sparse Biomolecules; Multicompartment Liquid-Cooling/Warming Protective Garments; Laser Metrology for an Optical-Path-Length Modulator; PCM Passive Cooling System Containing Active Subsystems; Automated Electrostatics Environmental Chamber; Estimating Aeroheating of a 3D Body Using a 2D Flow Solver; Artificial Immune System for Recognizing Patterns; Computing the Thermodynamic State of a Cryogenic Fluid; Safety and Mission Assurance Performance Metric; Magnetic Control of Concentration Gradient in Microgravity; Avionics for a Small Robotic Inspection Spacecraft; and Simulation of Dynamics of a Flexible Miniature Airplane.

Source record↗

Background Error Covariance Estimation using Information from a Single Model Trajectory with Application to Ocean Data Assimilation into the GEOS-5 Coupled Model

An attractive property of ensemble data assimilation methods is that they provide flow dependent background error covariance estimates which can be used to update fields of observed variables as well as fields of unobserved model variables. Two methods to estimate background error covariances are introduced which share the above property with ensemble data assimilation methods but do not involve the integration of multiple model trajectories. Instead, all the necessary covariance information is obtained from a single model integration. The Space Adaptive Forecast error Estimation (SAFE) algorithm estimates error covariances from the spatial distribution of model variables within a single state vector. The Flow Adaptive error Statistics from a Time series (FAST) method constructs an ensemble sampled from a moving window along a model trajectory. SAFE and FAST are applied to the assimilation of Argo temperature profiles into version 4.1 of the Modular Ocean Model (MOM4.1) coupled to the GEOS-5 atmospheric model and to the CICE sea ice model. The results are validated against unassimilated Argo salinity data. They show that SAFE and FAST are competitive with the ensemble optimal interpolation (EnOI) used by the Global Modeling and Assimilation Office (GMAO) to produce its ocean analysis. Because of their reduced cost, SAFE and FAST hold promise for high-resolution data assimilation applications.

Data Assimilation↗

Photoelectric photometry of comet Kohoutek (1973f)

Comet Kohoutek was observed with the 50 cm (f/15) reflecting telescope of the European Southern Observatory, La Silla, Chile, on fourteen nights between January 16 and 30, when the heliocentric and geocentric distances of the comet were r=0.66 - 1.00 A.U. and delta=0.81 - 0.96 A.U., respectively. The 40 inch and 80 inch diaphragms were used for the photometry of the cometary head in the UBV system and with six interference filters. The atmospheric conditions were good but the accuracy of observations was low due to large extinction and twilight. The mean error of one measurement of log F in all but Na 5893 A filters can be estimated at plus or minus 0.02, whereas the accuracy through the Na filter was substantially lower.

Kohoutek, L.↗