SEARCH · Engineering Papers
Results for “Ferromagnets”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Chloride Reduction of Mn 3+ in Mild Hydrothermal Synthesis of a Charge Ordered Defect Pyrochlore, CsMn 2+ Mn 3+ F 6 , a Canted Antiferromagnet with a Hard Ferromagnetic Component
Geometrically frustrated systems play an important role in studying new physical phenomena and unconventional thermodynamics. Charge ordered defect pyrochlores AM 2+ M 3+ F 6 offer a convenient platform for probing the interplay between electron distribution over M 2+ and M 3+ sites and structural distortions; however, they are limited to compounds with M 2+/3+ = V, Fe, Ni, and Cu due to difficulties in the simultaneous stabilization of other 3d elements in the +2 and +3 oxidation states. Herein, we employ Cl– anions under hydrothermal conditions for the mild reduction of Mn 2 O 3 in concentrated HF to obtain the CsMn 2+ Mn 3+ F 6 composition as a phase pure sample and study its properties. The magnetism of CsMn 2 F 6 was characterized by measuring the magnetic susceptibility and isothermal magnetization data, and a magnetic transition to a canted antiferromagnet state was found at 24.1 K. We determined the magnetic structure of CsMn 2 F 6 using powder neutron diffraction, which revealed successive long-range ordering of the Mn 2+ and Mn 3+ sites that is accompanied by a second transition. As a result, the role and strength of magnetic exchange interactions were characterized using DFT calculations.
Ultrathin, High-Aspect Ratio, and Free-Standing Magnetic Nanowires by Exfoliation of Ferromagnetic Quasi-One-Dimensional van der Waals Lattices
Driven by numerous discoveries of novel physical properties and integration into functional devices, interest in one-dimensional (1D) magnetic nanostructures has grown tremendously. Traditionally, such structures are accessed with bottom-up techniques, but these require increasing sophistication to allow precise control over crystallinity, branching, aspect ratio, and surface termination, especially when approaching the subnanometer regime in magnetic phases. In this work, we show that mechanical exfoliation of bulk quasi-one-dimensional crystals, a method similar to those popularized for two-dimensional van der Waals (vdW) lattices, serves as an efficient top-down method to produce ultrathin freestanding nanowires that are both magnetic and semiconducting. We use CrSbSe 3 as a representative quasi-1D vdW crystal with strong magnetocrystalline anisotropy and show that it can be exfoliated into nanowires with an average cross-section of 10 ± 2.8 nm. The CrSbSe 3 nanowires display reduced Curie–Weiss temperature but higher coercivity and remanence than the bulk phase. The methodology developed here for CrSbSe 3 , a representative for a vast class of 1D vdW lattices, serves as a blueprint for investigating confinement effects for 1D materials and accessing functional nanowires that are difficult to produce via traditional bottom-up methods.
Impersonating a Superconductor: High-Pressure BaCoO 3 , an Insulating Ferromagnet
Not provided.
Iron-based binary ferromagnets for transverse thermoelectric conversion
Thermoelectric generation using the anomalous Nernst effect (ANE) has great potential for application in energy harvesting technology because the transverse geometry of the Nernst effect should enable efficient, large-area and flexible coverage of a heat source. For such applications to be viable, substantial improvements will be necessary not only for their performance but also for the associated material costs, safety and stability. In terms of the electronic structure, the anomalous Nernst effect (ANE) originates from the Berry curvature of the conduction electrons near the Fermi energy. To design a large Berry curvature, several approaches have been considered using nodal points and lines in momentum space. Here we perform a high-throughput computational search and find that 25 percent doping of aluminium and gallium in alpha iron, a naturally abundant and low-cost element, dramatically enhances the ANE by a factor of more than ten, reaching about 4 and 6 microvolts per kelvin at room temperature, respectively, close to the highest value reported so far. The comparison between experiment and theory indicates that the Fermi energy tuning to the nodal web—a flat band structure made of interconnected nodal lines—is the key for the strong enhancement in the transverse thermoelectric coefficient, reaching a value of about 5 amperes per kelvin per metre with a logarithmic temperature dependence. We have also succeeded in fabricating thin films that exhibit a large ANE at zero field, which could be suitable for designing low-cost, flexible microelectronic thermoelectric generators.
Spin–orbit torque switching of a ferromagnet with picosecond electrical pulses
The development of approaches that can efficiently control the magnetization of magnetic materials is central to the creation of fast and low-power spintronic devices. Spin transfer torque can be used to electrically manipulate magnetic order in devices, but is typically limited to nanosecond timescales. Alternatively, spin–orbit torque can be employed, and switching with current pulses down to ~200 ps has been demonstrated. However, the upper limit to magnetization switching speed remains unestablished. Here, we show that photoconductive switches can be used to apply 6-ps-wide electrical pulses and deterministically switch the out-of-plane magnetization of a common thin cobalt film via spin–orbit torque. We probe the ultrafast magnetization dynamics due to spin–orbit torques with sub-picosecond resolution using the time-resolved magneto-optical Kerr effect (MOKE). We also estimate that the magnetization switching consumes less than 50 pJ in micrometre-sized devices.
The nature of ferromagnetism in the chiral helimagnet Cr1/3NbS2
Explore the source record for details and available documents.
Irradiation stability and induced ferromagnetism in a nanocrystalline CoCrCuFeNi highly-concentrated alloy
Thermodynamic instabilities driven by temperature and irradiation in a nanocrystalline highly-concentrated alloy promote the nucleation and growth of FeCo-rich “nanomagnets”.
CoMnCrGa: a novel ferromagnetic material with high spin-polarization for room temperature spintronics
Here, we report the synthesis of a novel quaternary Heusler alloy CoMnCrGa and its structural, magnetic, transport and electronic properties using both experimental and theoretical methods.
Robust giant anomalous Nernst effect in polycrystalline nodal web ferromagnets
The transverse thermoelectric effect based on the anomalous Nernst effect (ANE) has attracted attention, especially for thermoelectric and spintronic applications. Fe3X (X = Ga, Al) is known to exhibit a large ANE at room temperature owing to the topological electronic band structure so-called nodal web. Here, we systematically investigate ANE in the polycrystalline Fe3Ga1−xAlx and Fe3Al1−xSix. Despite significant chemical substitutions, a very robust feature of the large ANE −Syx∼ 5.7 μ V/K is found for Fe3Ga1−xAlx (0≲x≲0.6), exhibiting a striking x independent nodal web contribution. Since aluminum is more low-cost and abundant than gallium, our results indicate Fe3Ga1−xAlx (x∼0.6) should be suitable for large-scale thermoelectric applications.
Discovery of an insulating ferromagnetic phase of electrons in two dimensions
Not Available
Element- and Time-Resolved Measurements of Spin Dynamics Using X-ray Detected Ferromagnetic Resonance
Although XFMR experiments have been carried out at a number of synchrotron radiation facilities since 2004, only a few facilities currently have XFMR setups available for user operation. Here in this review, we mainly focus on recent developments and work that has been carried out using time-resolved XFMR at beamline 4.0.2 of the Advanced Light Source and at beamline I10 of the Diamond Light Source. The experimental setup and the sample holder used at beamline I10 and beamline 4.0.2, respectively, are shown in Figure 1. We will first introduce the working principle of XFMR and then provide examples of the capabilities of this technique. Finally, we will briefly describe an outlook for the future development of and new opportunities for XFMR.
Magnetic interactions and spin excitations in van der Waals ferromagnet VI 3
Using a combination of density functional theory (DFT) and spin-wave theory methods, we investigate the magnetic interactions and spin excitations in semiconducting VI 3 . Exchange parameters of monolayer, bilayer, and bulk forms are evaluated by mapping the magnetic energies of various spin configurations, calculated using DFT + U, onto the Heisenberg model. The intralayer couplings remain largely unchanged in three forms of VI 3 , while the interlayer couplings show stronger dependence on the dimensionality of the materials. We calculate the spin-wave spectra within a linear spin-wave theory and discuss how various exchange parameters affect the magnon bands. Here, the magnon–magnon interaction is further incorporated, and the Curie temperature is estimated using a self-consistently renormalized spin-wave theory. To understand the roles of constituent atoms on magnetocrystalline anisotropy energy (MAE), we resolve MAE into sublattices and find that a strong negative V-I inter-sublattice contribution is responsible for the relatively small easy-axis MAE in VI 3 .
On the origin of magnetic anisotropy in 4f-free ferromagnets based on the CaCu 5 structure *
Using first-principles calculations, we investigate the origin of magnetocrystalline anisotropy in a series of 4f-electron-free intermetallics with CaCu 5 -based structures: YCo 5 , YCo 4 B, and Y 3 Co 13 B 2 . The electronic structure of these compounds is characterized by a set of narrow 3d bands near the Fermi level. In YCo 5 the easy-axis anisotropy originates primarily in the spin–orbit coupling-induced mixing of the electronic states with Co d x 2 -y 2 and d xy character. The analysis of k-resolved anisotropy shows that positive contributions accumulate from the entire Brillouin zone but are particularly large near the k z = 0 plane. The analysis of the single-site and two-site terms reveals a large positive single-site contribution to the magnetocrystalline anisotropy from the Co atoms on the honeycomb sublattice, along with two-site contributions from both honeycomb and kagome sublattices.
Surface magnetism in Fe 3 GeTe 2 van der Waals ferromagnet
The surface magnetization of Fe 3 GeTe 2 was examined by low-energy electron microscopy (LEEM) using an off-normal incidence electron beam. We found that the 180o domain walls are of Bloch type. Temperature-dependent LEEM measurements yield a surface magnetization with a surface critical exponent β1 = 0.79±0.02. This result is consistent with surface magnetism in the 3D semi-infinite Heisenberg (β1 = 0.84±0.01) or Ising (β1 = 0.78±0.02) models, which is distinctly different from the bulk exponent (β = 0.34±0.07). Further, the measurements reveal the power of LEEM with a tilted beam to determine magnetic domain structure in quantum materials, without need for the use of spin-polarized electrons. Single crystal diffraction measurements reveal inversion symmetry-breaking weak peaks and yield space group P-6m2. This Fe site defect-derived loss of inversion symmetry enables the formation of skyrmions in this Fe 3 GeTe 2 crystal.