Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FERROMAGNETIC MATERIALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Tailoring magnetism in CoNi films with perpendicular anisotropy by ion irradiation

This paper reports on the influence of ion irradiation on the magnetic properties of Co/Ni multilayers with perpendicular magnetic anisotropy (PMA). This material is a very promising candidate for ultrahigh density spintronic applications since it exhibits high polarization and low damping parameters. We show that PMA can be tailored in a controlled way by using uniform He{sup +} ion irradiation or focused Ga{sup +} ion beam.

36 MATERIALS SCIENCE↗

High strength bulk Fe-Co alloys produced by powder metallurgy

Fe-Co alloys are extensively used in lamination form, but there are certain power generation applications that require Fe-Co rotors in bulk form. Experiencing only a dc magnetic field, these rotors can be as large as 0.5 m in diameter, depending on the size of the generator. The forging of such large pieces of Fe-Co has proven to be difficult. The present study investigates powder metallurgy processing of a gas atomized FeCoNbV alloy through hot isostatic pressing (HIP) for manufacturing large size rotors with improved mechanical strength. Gas atomized FeCoNbV alloy powders with and without ball milling were hot isostatic pressed at temperatures between 675 and 850 deg. C at a fixed pressure of 193 MPa for up to 6 h. Ball milling prior to HIP improved the yield strength. A further improvement in yield strength and in ductility was obtained after a disordering heat treatment at 730 deg. C followed by a rapid quench to room temperature. The optimum HIP and annealing conditions resulted in samples with yield strengths of 870 MPa. The compacts exhibited average coercivity values of 6.4 Oe and maximum permeability values of 1100.

36 MATERIALS SCIENCE↗

Fe films grown on GaAs(110) in a two-step process: Improved structural and magnetic properties

Fe films of up to 10 ML thickness were grown on cleaved GaAs(110) in a two-step process that associates low-temperature deposition at 130 K with a subsequent annealing to room temperature. Low-energy electron diffraction, scanning tunneling microscopy, and in situ magneto-optical Kerr effect were combined to study these films. The observed magnetic and structural properties are distinctly different from the characteristics of conventionally grown Fe films on GaAs. We found no indication of interface compound formation. The applied two-step growth process is a promising technique to further increase spin-injection and detection efficiencies of Fe/GaAs hybrid structures.

36 MATERIALS SCIENCE↗

Effect of bombardment with different ions (H, He, Ar) on ordering transformation of Fe{sub 48}Pt{sub 52} films

Fe{sub 48}Pt{sub 52} thin films with a thickness of 50 nm were deposited at room temperature before undergoing glow-discharge-induced ion bombardment at 300 deg. C for 1 h. The energy of the incident ions was adjusted by applying a radio-frequency bias (V{sub b}) from 200 to 600 V. H{sub 2}, He, and Ar were used as the working gases. Significant ordering enhancement was only found in the H-ion bombarded films. The coercivity of such films is greatly increased from 0.5 kOe, for the sample without any bias, to around 8 kOe at V{sub b}=200-600 V, which result is similar to that for a film annealed at 400 deg. C in a vacuum. This result suggests that H-ion bombardment has the effect of a 100 deg. C increase in annealing temperature. Microstructural studies reveal that the average grain size of the H-ion bombarded films is about 30 nm, which is much smaller than that of 400 deg. C-annealed films. The film thickness of He-ion bombarded samples decreases linearly as V{sub b} increases because of the intensive sputtering effect. Under Ar-ion bombardment, most of the film is removed even at V{sub b}=200 V.

36 MATERIALS SCIENCE↗

Effect of anisotropy on anomalous Hall effect in Tb-Fe thin films

The electrical and Hall resistivities of Tb{sub x}Fe{sub 100-x} thin films in the temperature range 13-300 K were investigated. The sign of Hall resistivity at 300 K is found to change from positive for x=28 film to negative for x=30 film, in accordance with the compensation of Tb and Fe moments. All the films are seen to have planar magnetic anisotropy at 13 K. The temperature coefficients of electrical resistivities of the amorphous films with 19<=x<=51 are seen to be negative. The temperature dependence of Hall resistivity of these films is explained on the basis of random magnetic anisotropy model. The temperature dependences of Hall resistivities of the x=22 and 41 films are seen to exhibit a nonmonotonous behavior due to change in anisotropy from perpendicular to planar. The same behavior is considered for the explanation regarding the probable formation of Berry phase curvature in these films.

36 MATERIALS SCIENCE↗

Magnetic properties of (Sm,Y){sub 5}Fe{sub 17} melt-spun ribbons

An investigation of the synthesis of the (Sm{sub 1-x}Y{sub x}){sub 5}Fe{sub 17} (x = 0 to 0.5) phase and its magnetic properties is presented. (Sm{sub 1-x}Y{sub x}){sub 5}Fe{sub 17} (x = 0 to 0.5) melt-spun ribbons that fully or mainly consisted of the amorphous phase and which showed low coercivity were prepared. Heat treatment of the melt-spun ribbons resulted in the formation of the (Sm,Y){sub 5}Fe{sub 17} phase. The highest remanence, 50 emu/g, was achieved in the annealed (Sm{sub 0.7}Y{sub 0.3}){sub 5}Fe{sub 17} melt-spun ribbon. However,the annealed (Sm{sub 1-x}Y{sub x}){sub 5}Fe{sub 17} (x = 0.4 to 0.5) melt-spun ribbons did not contain the (Sm,Y){sub 5}Fe{sub 17} phase and showed low coercivity values.

36 MATERIALS SCIENCE↗

Magnetic properties of sputtered Permalloy/molybdenum multilayers

In this work, we report the magnetic properties of sputtered Permalloy (Py: Ni{sub 80}Fe{sub 20})/molybdenum (Mo) multilayer thin films. We show that it is possible to maintain a low coercivity and a high permeability in thick sputtered Py films when reducing the out-of-plane component of the anisotropy by inserting thin film spacers of a non-magnetic material like Mo. For these kind of multilayers, we have found coercivities which are close to those for single layer films with no out-of-plane anisotropy. The coercivity is also dependent on the number of layers exhibiting a minimum value when each single Py layer has a thickness close to the transition thickness between Neel and Bloch domain walls.

36 MATERIALS SCIENCE↗

Tailoring coercivity of unbiased exchange-coupled ferromagnet/antiferromagnet bilayers

This paper reports experimental results obtained on unconventional exchange-coupled ferromagnet/antiferromagnet (FM/AF) system showing zero net bias. The Curie temperature of the FM (NiCu) is lower than the blocking temperature of the AF (IrMn). Samples were either annealed or irradiated with He, Ar, or Ge ions at 40 keV. Due to the exchange coupling at the FM/AF interface, the coercivity (H{sub C}) of the as-deposited FM/AF bilayer is rather higher than that of the corresponding FM single layer. We found that by choosing a proper ion fluence or annealing temperature, it is possible to controllably vary H{sub C}. Ion irradiation of the FM single layer has lead to only a decrease of H{sub C} and annealing or He ion irradiation has not caused important changes at the FM/AF interface; nevertheless, a twofold increase of H{sub C} was obtained after these treatments. Even more significant enhancement of H{sub C} was attained after Ge ion irradiation and attributed to ion-implantation-induced modification of only the FM layer; damages of the FM/AF interface, on the other hand, decrease the coercivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tuning the direction of exchange bias in ferromagnetic/antiferromagnetic bilayer by angular-dependent spin-polarized current

The angular dependence of an external magnetic field applied with an in-plane alternating pulse that induces a new direction of exchange bias (EB) is observed in an NiFe/IrMn bilayer. Depending strongly on the direction of the external field, EB field gradually orients along the external field with the increase in current pulse, and the new direction of EB is finally established. Furthermore, the new direction of EB can also be induced along the external field at once when the applied pulse is larger than the critical current. Because the strength and direction of the EB is highly correlated with the micromagnetic state distribution of the antiferromagnet, the observations are explained by the spin torque exerted on the antiferromagnetic moments and provide evidence for the prediction of spin transfer and current-induced switching in antiferromagnets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Room temperature luminescence and ferromagnetism of AlN:Fe

AlN:Fe polycrystalline powders were synthesized by a modified solid state reaction (MSSR) method. Powder X-ray diffraction and transmission electron microscopy results reveal the single phase nature of the doped samples. In the doped AlN samples, Fe is in Fe{sup 2+} state. Room temperature ferromagnetic behavior is observed in AlN:Fe samples. Two photoluminescence peaks located at about 592 nm (2.09 eV) and 598 nm (2.07 eV) are observed in AlN:Fe samples. Our results suggest that AlN:Fe is a potential material for applications in spintronics and high power laser devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of electron correlation in Sr(Ca)Ru{sub 1-x}Cr{sub x}O{sub 3}: Density functional calculation

We have investigated the electronic structure of Sr(Ca)Ru{sub 1-x}Cr{sub x}O{sub 3} using the full potential linearized augmented plane wave method by different approximation such as LSDA and LSDA+U. The LSDA calculation suggest that Cr{sup 4+}-Ru{sup 4+} hybridization is responsible for the high Curie temperature T{sub C} in SrRu{sub 1-x}Cr{sub x}O{sub 3}, but it cannot completely describe its physical behavior. Our LSDA+U DOS results for SrRu{sub 1-x}Cr{sub x}O{sub 3} clearly establishes renormalization of the intra-atomic exchange strength at the Ru sites, arising from the Cr-Ru hybridization. The antiferromagnetic coupling of Cr{sup 3+} with Ru{sup 4+,5+} lattice increases the screening, which is consistent with the low magnetic moment of the Ru ions. The more distorted Ca-based compounds as compared to the Sr-based systems shows that the hybridization mechanism is not relevant for these compounds. The bigger exchange splitting of Ru 4d and Cr 3d at the Fermi level with Ru{sup 4+,5+} and Cr{sup 3+,4+} orbital occupancies of CaRu{sub 0.75}Cr{sub 0.25}O{sub 3} in the LSDA+U calculation, compared with that of the LSDA calculation, shows that repulsion between electrons tend to keep the localized spins from overlapping. The low screening of the Ru t{sub 2g} electrons increases T{sub C} in the Ca-based systems, which is consistent with the both high Ru exchange splitting and magnetic moment. The insulating behavior of the high Cr-doped systems can be explained by considering the Ru{sup 4+}+Cr{sup 4+{yields}}Ru{sup 5+}+Cr{sup 3+} charge transfer. - Graphical Abstract: We have investigated the electronic structure of Sr(Ca)Ru{sub 1-x}Cr{sub x}O{sub 3} using different ab-initio calculation such as LSDA and LSDA+U approximation. The antiferromagnetic hybridization of Cr{sup 3+} with Ru{sup 4+,5+} lattice increases the screening, which is consistent with the low magnetic moment of the Ru ions. The LSDA+U calculation for the more distorted Cr impurity doped Ca-based ruthenate compounds as compared to the Sr-based systems shows repulsion between electrons, which tends to keep the localized spins from overlapping.

36 MATERIALS SCIENCE↗

Effect of pulsed laser irradiation on the structural and the magnetic properties of NiMn/Co exchange bias system

We report about the influence of pulsed laser irradiation on the structural and magnetic properties of NiMn/Co thin films. Rocking curve measurements showed a significant improvement of the (111) texture of NiMn after laser irradiation which was accompanied by grain growth. We have studied the ordering transition in as-prepared and irradiated (laser fluence of 0.15 J/cm{sup 2}) samples during subsequent annealing. The onset of the fcc to fct phase transformation occurs at 325 deg. C irrespective of laser irradiation. Exchange bias fields for the laser irradiated samples are higher than those of the as-prepared samples. The observed increase in the exchange bias field for laser irradiated samples has been attributed to the increased grain size and the improved (111) texture of the NiMn layer after laser irradiation.

36 MATERIALS SCIENCE↗

Exchange bias in NiFe/granular-FeMn-MgO bilayers

A series of polycrystalline NiFe/(FeMn){sub 1-x}(MgO){sub x} bilayers with granular antiferromagnetic layers were prepared by magnetron sputtering. For a specific antiferromagnetic layer thickness, the intensity of the fcc (111) x-ray diffraction peaks from Cu, NiFe, and FeMn layers, and the FeMn grain size exhibit maxima at x=0.025. At this composition, significant enhancement in exchange field is observed together with slight change in coercivity. Remarkably, the training effect in exchange bias is greatly suppressed. These observations indicate the possibility of utilizing granular antiferromagnetic layers in magnetoelectronic devices to improve thermal stability.

36 MATERIALS SCIENCE↗

Room-temperature ferromagneticlike behavior in Mn-implanted and postannealed InAs layers deposited by molecular beam epitaxy

We report on the magnetic and structural properties of Ar- and Mn-implanted InAs epitaxial films grown on GaAs (100) by molecular beam epitaxy and the effect of rapid thermal annealing (RTA) for 30 s at 750 deg. C. Channeling particle induced x-ray emission (PIXE) experiments reveal that after Mn implantation almost all Mn atoms are substitutional in the In site of the InAs lattice, like in a diluted magnetic semiconductor. All of these samples show diamagnetic behavior. However, after RTA treatment the Mn-InAs films exhibit room-temperature magnetism. According to PIXE measurements the Mn atoms are no longer substitutional. When the same set of experiments was performed with Ar as implantation ion, all of the layers present diamagnetism without exception. This indicates that the appearance of room-temperature ferromagneticlike behavior in the Mn-InAs-RTA layer is not related to lattice disorder produced during implantation but to a Mn reaction produced after a short thermal treatment. X-ray diffraction patterns and Rutherford backscattering measurements evidence the segregation of an oxygen-deficient MnO{sub 2} phase (nominally MnO{sub 1.94}) in the Mn-InAs-RTA epitaxial layers which might be the origin of the room-temperature ferromagneticlike response observed.

36 MATERIALS SCIENCE↗

Magnetic properties of some metastable Co-Ru alloys studied by ion beam mixing and ab initio calculation

Magnetic fcc-Co{sub 75}Ru{sub 25} (L1{sub 2}) phase and nonmagnetic fcc-Co{sub 25}Ru{sub 75} (L1{sub 2}) phase are obtained by ion beam mixing in the respective Co-Ru multilayered films. Interestingly, in the Co{sub 50}Ru{sub 50} multilayered films, a magnetic dual-fcc phase, identified to be a mixture consisting of a magnetic fcc-Co{sub 75}Ru{sub 25} and a nonmagnetic fcc-Co{sub 25}Ru{sub 75} phases, is observed at an irradiation dose of 3x10{sup 15} Xe{sup +}/cm{sup 2} and, upon further irradiation to a dose of 7x10{sup 15} Xe{sup +}/cm{sup 2}, transformed into a nonmagnetic single-fcc phase with an alloy composition back to be Co{sub 50}Ru{sub 50}.

36 MATERIALS SCIENCE↗

Improved tunnel magnetoresistance of magnetic tunnel junctions with Heusler Co{sub 2}FeAl{sub 0.5}Si{sub 0.5} electrodes fabricated by molecular beam epitaxy

The authors have developed a magnetic tunnel junction of Co{sub 2}FeAl{sub 0.5}Si{sub 0.5} electrodes and a MgO barrier fabricated by molecular beam epitaxy and observed that this device had a tunnel magnetoresistance ratio of 386% at approximately 300 K and 832% at 9 K. The lower Co{sub 2}FeAl{sub 0.5}Si{sub 0.5} electrode was annealed during and after deposition resulting in a highly ordered structure with small roughness. This highly ordered structure could be obtained by annealing treatment even at low temperatures. Furthermore, a weak temperature dependence of the tunnel magnetoresistance ratio was observed for the developed magnetic tunnel junction.

36 MATERIALS SCIENCE↗

Positron annihilation in (Ga, Mn)N: A study of vacancy-type defects

The vacancy-type defects in (Ga,Mn)N films grown by metal organic chemical vapor deposition were studied by positron annihilation technique. Doppler broadening spectra were measured for the films. Compared to the undoped GaN film, the positron trapping defects in the (Ga,Mn)N films have been changed to a new type defects and its concentration increases with the increasing Mn concentration. By analyzing the S-W correlation plots and our previous results, we identify this type defects in the (Ga,Mn)N as V{sub N}-Mn{sub Ga} complex. This type of defects should be considered when understand the magnetic properties in a real (Ga,Mn)N system.

36 MATERIALS SCIENCE↗