Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Experiment 2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Importance of van der Waals interactions for ab initio studies of topological insulators

We investigate the lattice and electronic structures of the bulk and surface of the prototypical layered topological insulators Bi 2 Se 3 and Bi 2 Te 3 using ab initio density functional methods, and systematically compare the results of different methods of including van der Waals (vdW) interactions. We show that the methods utilizing semi-empirical energy corrections yield accurate descriptions of these materials, with the most precise results obtained by properly accounting for the long-range tail of the vdW interactions. The bulk lattice constants, distances between quintuple layers and the Dirac velocity of the topological surface states (TSS) are all in excellent agreement with experiment. In Bi 2 Te 3 , hexagonal warping of the energy dispersion leads to complex spin textures of the TSS at moderate energies, while in Bi 2 Se 3 these states remain almost perfectly helical away from the Dirac point, showing appreciable signs of hexagonal warping at much higher energies, above the minimum of the bulk conduction band. Furthermore, our results establish a framework for unified and systematic self-consistent first principles calculations of topological insulators in bulk, slab and interface geometries, and provides the necessary first step toward ab initio modeling of topological heterostructures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Thermodynamics of the dipole-octupole pyrochlore magnet Ce 2 Hf 2 O 7 in applied magnetic fields

The recently discovered dipole-octupole pyrochlore magnet Ce 2 Hf 2 O 7 is a promising three-dimensional quantum spin liquid candidate which shows no signs of ordering at low temperature. Here we investigate the thermodynamic response to magnetic fields applied along the global [110] direction using specific heat measurements and fits using numerical methods, and solve the corresponding magnetic structure using neutron diffraction. Specific heat data in moderate fields are reproduced well, however, at high fields the agreement is not satisfactory. We especially observe a two-step release of entropy, a finding that demands a review of both theory and experiment. We address it within the framework of three possible scenarios, including an analysis of the crystal field Hamiltonian not restricted to the two-dimensional single-ion doublet subspace. We conclusively rule out two of these scenarios and find qualitative agreement with a simple model of field misalignment with respect to the crystalline direction. As a result, we discuss the implications of our findings for [111] applied fields and for future experiments on Ce 2 Hf 2 O 7 and its sister compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Polystyrene Hydrogenolysis to High-Quality Lubricants Using Ni/SiO 2

Pyrolytic and light-activated oxidation processes are leading technologies for utilizing polystyrene (PS) wastes. These approaches exhibit poor selectivities, use complex reactors, and require solvents. Hydrogenolysis is effective for deconstructing polyolefins, but its application to PS feedstocks has been limited. Herein, we demonstrate Ni/SiO 2 catalysts to facilitate PS (M w ≈ 97 kDa) hydrogenolysis to produce lubricant base oils possessing group IV properties, achieving maximum yields of 70% within 6 h at 300 °C and 70 bar of H 2 . Gas, liquid, and oil product yields are stable across reaction conditions, whereas hydrogenation of the PS aromaticity and reduction of the molecular weight benefit from higher temperatures and H 2 pressures. Time-dependent experiments underscore the importance of elevated H 2 pressure, revealing that PS hydrogenolysis occurs sequentially, with aromatic ring hydrogenation preceding degradation of the C–C backbone. Kinetic measurements with 1,2-diphenylethane as a probe molecule demonstrate that ring hydrogenation pis 3 orders of magnitude faster than internal C–C bond cleavage over Ni/SiO 2 . Ni/SiO 2 proves to be effective in the hydrogenolysis of heavier PS polymers and rigid commercial PS products. Conversely, flexibility and foam PS feeds result in Ni/SiO 2 deactivation, attributed to performance additives. Unlike polyolefins, the process produces very little methane and other light hydrocarbons. Furthermore, these findings expand the applicability of hydrogenolysis to PS feedstocks, offering a versatile solution and broadening the range of high-value products from PS to include lubricant base oils.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Characterizing Bioavailable Soil Nutrients Across Coastal Systems: Western Lake Erie and Chesapeake Bay

Terrestrial Aquatic Interfaces (TAIs), defined as where land meets water, exhibit important hydrological, biological, and biogeochemical dynamics and play a critical role in the Earth’s carbon cycle. Current Earth System Models improperly represent this role due to the complexity of these systems and the disproportionally large impact TAIs have relative to their area. To improve our predictive capacity of coastal system dynamics, a better understanding of carbon and nutrient cycling across TAI’s is needed. Coastal Observations, Mechanisms, and Predictions Across Systems and Scales (COMPASS) aims to achieve this through field observations and laboratory incubations throughout the Western Lake Erie and Chesapeake Bay regions. Here, we report on preliminary results from a soil characterization experiment across the WLE and CB regions. This experiment was conducted as part of the 2-year field, measurements, and experiments (FME) pilot study portion of COMPASS to provide initial baseline data for the sites and to characterize the spatial variability of our analytes. Soil samples were collected from three locations along the TAI transect (upland forest, transitional forest, and wetland) and analyzed for bioavailable nutrients using three types of extractions: (a) water extractions, (b) 2M KCl extractions, and (c) 1M NH4Cl extractions to analyze (a) water soluble organic carbon (WSOC), (b) ammonium and nitrate, and (c) base cations, including Ca, Mg, Na, K, and Fe. These analyses, in conjunction with other bulk physicochemical analyses, will help establish baseline understanding of these sites to drive future research and design focused experiments that will ultimately improve our predictive understanding of these freshwater and marine coastal TAIs and their response to short and long-term changes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

CMB-S4: Forecasting Constraints on Primordial Gravitational Waves

CMB-S4—the next-generation ground-based cosmic microwave background (CMB) experiment—is set to significantly advance the sensitivity of CMB measurements and enhance our understanding of the origin and evolution of the universe. Among the science cases pursued with CMB-S4, the quest for detecting primordial gravitational waves is a central driver of the experimental design. This work details the development of a forecasting framework that includes a power-spectrum-based semianalytic projection tool, targeted explicitly toward optimizing constraints on the tensor-to-scalar ratio, r, in the presence of Galactic foregrounds and gravitational lensing of the CMB. This framework is unique in its direct use of information from the achieved performance of current Stage 2–3 CMB experiments to robustly forecast the science reach of upcoming CMB-polarization endeavors. The methodology allows for rapid iteration over experimental configurations and offers a flexible way to optimize the design of future experiments, given a desired scientific goal. To form a closed-loop process, we couple this semianalytic tool with map-based validation studies, which allow for the injection of additional complexity and verification of our forecasts with several independent analysis methods. We document multiple rounds of forecasts for CMB-S4 using this process and the resulting establishment of the current reference design of the primordial gravitational-wave component of the Stage-4 experiment, optimized to achieve our science goals of detecting primordial gravitational waves for r > 0.003 at greater than 5σ, or in the absence of a detection, of reaching an upper limit of r < 0.001 at 95% CL.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Shot noise and universal Fano factor as a characterization of strongly correlated metals

Shot noise measures out-of-equilibrium current fluctuations and is a powerful tool to probe the nature of current-carrying excitations in quantum systems. Recent shot-noise measurements in the heavy-fermion strange metal YbRh 2 Si 2 exhibit a strong suppression of the Fano factor ( F )—the ratio of the current noise to the average current in the dc limit. This system is representative of metals in which electron correlations are extremely strong. Here we carry out the first theoretical study on the shot noise of diffusive metals in the regime of strong correlations. A Boltzmann-Langevin equation formulation is constructed in a quasiparticle description in the presence of strong correlations. We find that F = 3 / 4 in such a correlation regime. Thus, we establish the aforementioned Fano factor as universal to Fermi liquids, and we show that the Fano factor suppression observed in experiments on YbRh 2 Si 2 necessitates a loss of the quasiparticles. Our work opens the door to systematic theoretical studies of shot noise as a means of characterizing strongly correlated metallic phases and materials. Published by the American Physical Society 2024

Wang, Yiming (ORCID:0000000277582921)↗
DOE OSTI2025

Standardising the “Gregory method” for calculating equilibrium climate sensitivity

The equilibrium climate sensitivity (ECS) – the equilibrium global mean temperature response to a doubling of atmospheric CO 2 – is a high-profile metric for quantifying the Earth system's response to human-induced climate change. A widely applied approach to estimating the ECS is the “Gregory method” (Gregory et al., 2004), which uses an ordinary least squares (OLS) regression between the net radiative flux, N, and surface air temperature anomalies, ΔT, from a 150 year experiment in which atmospheric CO 2 concentrations are quadrupled. The ECS is determined by extrapolating the linear fit to N=0, i.e. the ΔT-intercept, indicating the point at which the system is back in equilibrium. This method has been used to compare ECS estimates across the CMIP5 and CMIP6 ensembles and will likely be a key diagnostic for CMIP7. Despite its widespread application, there is little consistency or transparency between studies in how the climate model data is processed prior to the regression, leading to potential discrepancies in ECS estimates. We identify 32 alternative data processing pathways, varying by differences in global mean weighting, net radiative flux variable, anomaly calculation method, and linear regression fit. Using 44 CMIP6 models, we systematically assess the impact of these choices on ECS estimates and calculate uncertainty ranges using two bootstrap approaches. While the inter-model ECS range is insensitive to the data processing pathway, individual outlier models exhibit notable differences. Approximating a model's native grid cell area (if irregular) with cosine of the latitude can decrease the ECS by 11 %, the choice of N-variable can change the ECS by 6 %, and some anomaly calculation methods can introduce spurious temporal correlations in the processed data. Beyond data processing choices, we also evaluate an alternative linear regression method – total least squares (TLS) – which has a more statistically robust basis than OLS. However, for consistency with previous literature, and given TLS may reduce the ECS compared to OLS (by up to 24 %), thereby making a known bias in the Gregory method worse, we do not feel there is sufficient clarity to recommend a transition to TLS in all cases. To improve reproducibility and comparability in future studies, we recommend a standardised Gregory method: weighting the global mean by cell area, using the top of the atmosphere (as opposed to the top of model) N-variable, and calculating anomalies by first applying a rolling average to the preindustrial control timeseries then subtracting from the raw CO 2 quadrupling experiment. This approach accounts for model drift while reducing noise in the data to best meet the pre-conditions of the linear regression. While CMIP6 results of the multi-model mean ECS appear insensitive to these processing choices, similar assumptions may not hold for CMIP7, underscoring the need for standardised data preparation in future climate sensitivity assessments.

Geosciences↗
DOE OSTI2024

Workflow for Developing and Operating Subsurface Hydrogen Storage Facilities in Porous Reservoirs

Long-duration (seasonal) storage of natural gas (NG), which primarily consists of methane (CH 4 ), has been practiced for more than a hundred years at underground gas storage (UGS) facilities that use depleted hydrocarbon reservoirs, saline aquifers, and salt caverns. To enable hydrogen (H 2 ) to be used as a long-duration, energy-storage medium, similar facilities are envisioned for underground H 2 storage (UHS) of either H 2 or H 2 /NG mixtures. Experience with UGS can be used to guide recommended practices for developing and operating UHS facilities in porous reservoirs. The most important factors (formation/fluid properties and engineering choices) that influence the performance of UHS reservoirs have been identified and quantified in previous studies. These factors and choices influence phenomena that determine the sweep efficiency of the stored working gas. These phenomena include viscous fingering, hysteretic capillary trapping, and gravity override of the working gas, as well as the upconing of nonproductive fluid that determine the sweep efficiency of the stored working gas. This report describes initial recommended-practices and a project-development workflow for UHS facilities that utilize porous reservoirs, based on the current state-of-knowledge about H 2 behavior in the subsurface. The workflow sequentially addresses all aspects of UHS project development, including the identification of H 2 sources and users, site ranking and down-selection, geologic and reservoir-engineering characterization, reservoir design, testing, risk management, commissioning, operations, and monitoring for a UHS facility. The goal is to enable UHS facilities to be developed in an efficient and timely manner, while carefully managing project risks. This workflow is similar to that which has been developed for UGS facilities (see Figure 1 of API, 2022), with the addition of tasks and subtasks specific to H 2 and UHS. The project-development workflow is broken down into three major stages: (1) define the H 2 use case; (2) rank, down-select, and characterize potential, candidate UHS sites; and (3) reservoir design, integrity testing, risk assessment, commissioning, operations, and monitoring for selected UHS sites. Each major stage is further broken down into tasks and subtasks, which are described at a high level. This report also provides more detailed descriptions of all tasks and subtasks that involve reservoir analysis and testing.

08 HYDROGEN↗
DOE OSTI2021

Structural and Electronic Influences on Rates of Tertpyridine-Amine Co III -H Formation During Catalytic H 2 Evolution in an Aqueous Environment

In this paper, the differences in catalytic performance for a series of Co hydrogen evolution catalysts with different pentadentate polypyridyl ligands (L), have been rationalized by examining elementary steps of the catalytic cycle using a combination of electrochemical and transient pulse radiolysis (PR) studies in aqueous solution. Solvolysis of the [Co II -Cl] + species results in the formation of [Co II (κ 4 -L)(OH 2 )] 2+ . Further reduction produces [Co I κ 4 -L)(OH 2 )] + , which undergoes a rate-limiting structural rearrangement to [Co I (κ 5 -L)] + before being protonated to form [Co III -H] 2+ . The rate of [Co III -H] 2+ formation is similar for all complexes in the series. Using E 1/2 values of various Co species and pKa values of [Co III -H] 2+ estimated from PR experiments, we found that while the protonation of [Co III -H] 2+ is unfavorable, [CoII-H]+ reacts with protons to produce H 2 . The catalytic activity for H 2 evolution tracks the hydricity of the [Co II -H] + intermediate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Elucidating the Roles of Amorphous Alumina Overcoat in Palladium-Catalyzed Selective Hydrogenation

Amorphous alumina overcoats generated by atomic layer deposition (ALD) have been shown to improve the selectivity and durability of supported metal catalysts in many reactions. Several mechanisms have been proposed to explain the enhanced catalytic performance, but the accessibilities of reactants through the amorphous overcoats remain elusive, which is crucial for understanding reaction mechanisms. Here, we show that an AlO x ALD overcoat is able to improve the alkene product selectivity of a supported Pd catalyst in acetylene (C 2 H 2 ) hydrogenation. We further demonstrate that the AlO x ALD overcoat blocks the access of C 2 H 2 (kinetic diameter of 0.33 nm), O 2 (0.35 nm), and CO (0.38 nm) but allows H 2 (0.29 nm) to access Pd surfaces. A H–D exchange experiment suggests that H 2 might dissociate heterolytically at the Pd–AlO x interface. These findings are in favor of a hydrogen spillover mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Supported Single Fe Atoms Prepared via Atomic Layer Deposition for Catalytic Reactions

In this work, we report a general strategy to synthesize Fe single-atom catalysts (SACs) on various substrates (e.g., multiwalled carbon nanotubes, SiO 2 , and TiO 2 ) with high Fe loading (>1.5 wt %) by atomic layer deposition (ALD) through optimization of ferrocene (Fe precursor) dose time. Fe/SiO 2 and Fe/TiO 2 SACs were used for CO oxidation reactions and catalytic degradation of a methylene blue (MB) solution, respectively. Compared with reported iron oxide catalysts, the efficiency of Fe/SiO 2 for CO oxidation was more than 2 orders of magnitude higher than the reported values. The photocatalysis experiment demonstrated that TiO 2 nanoparticles, deposited with two cycles of Fe ALD, showed the highest activity and had a more than 6-fold photocatalytic activity enhancement over pure TiO 2 for the degradation of MB. This universal method, optimized Fe ALD, expands the potential applications of Fe SACs on different substrates.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Initial decomposition mechanisms of 2,4,6-triamino-1,3,5-trinitrobenzene (TATB) and their kinetic isotope effect

2,4,6-triamino-1,3,5-trinitrobenzene (TATB) is an insensitive High Explosive (HE) that is widely studied to better understand the physical properties of safety and sensitivity of HE. A dominant initial decomposition mechanism of TATB is believed to be a dehydration reaction that forms mono- and di-furazans, although other mechanisms have been reported. In this work, seven initial decomposition mechanisms were modeled with ab initio simulations to calculate its free energy barriers, decomposition rates, and kinetic isotope effects. The energy barrier for mono-benzofurazan mechanisms was found to be high, >61 kcal/mol in the gas phase; however, the reaction energy can decrease significantly in a disordered condensed state. The predicted kinetic isotope effect ratio of the furazan mechanism was found to be k h /k d ≈ 1.41 at 60K, in agreement with the experiment. The NO 2 scission mechanism was found to be an entropy-driven mechanism because the free energy barrier decreased significantly with temperature, making it the most energetically favorable mechanism at high temperatures in the gas phase. So the results provide a better understanding of the atomistic decomposition mechanisms of TATB and may be useful for improving models of safety and sensitivity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Characterization of cubic Li$_{2}$$^{100}$MoO$_4$ crystals for the CUPID experiment

The CUPID Collaboration is designing a tonne-scale, background-free detector to search for double beta decay with sufficient sensitivity to fully explore the parameter space corresponding to the inverted neutrino mass hierarchy scenario. One of the CUPID demonstrators, CUPID-Mo, has proved the potential of enriched Li$_{2}$$^{100}$MoO$_4$ crystals as suitable detectors for neutrinoless double beta decay search. In this work, we characterised cubic crystals that, compared to the cylindrical crystals used by CUPID-Mo, are more appealing for the construction of tightly packed arrays. We measured an average energy resolution of (6.7$\pm$0.6) keV FWHM in the region of interest, approaching the CUPID target of 5 keV FWHM. We assessed the identification of $\alpha$ particles with and without a reflecting foil that enhances the scintillation light collection efficiency, proving that the baseline design of CUPID already ensures a complete suppression of this $\alpha$-induced background contribution. We also used the collected data to validate a Monte Carlo simulation modelling the light collection efficiency, which will enable further optimisations of the detector.

100Mo↗
DOE OSTI2020

Correlations between electronic order and structural distortions and their ultrafast dynamics in the single-layer manganite P r 0.5 C a 1.5 Mn O 4

Time-resolved x-ray diffraction experiments on the half-doped single-layered manganite Pr 0.5 Ca 1.5 Mn O 4 are used to monitor the ultrafast photoinduced dynamics of the structural distortion associated with the charge and orbital ordering (CO/OO). As in the nonlayered three-dimensional counterpart, the ordered phase melts in less than 100 fs after 800-nm photoexcitation and subsequently partially recovers due to thermal equilibration of electronic and vibrational systems. Photoexciting Pr 0.5 Ca 1.5 Mn O 4 below the transition temperature of a second structural phase transition that occurs around 146 K (deep inside the CO/OO phase) releases this structural transition, but progresses on a much slower timescale. Finally, this additional reduction of crystal symmetry, which we ascribe to a further tilt of the oxygen octahedra, can thus be considered to be only weakly coupled to CO/OO. Furthermore, static hard-x-ray and resonant soft-x-ray diffraction at the Mn L 2,3 edges experiments identify correlations between structural distortions and electronic order in thermal equilibrium.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Pitch Variation Experiments in Water-Moderated Square-Pitched U(6.90)O 2 Fuel Rod Lattices with Fuel to Water Volume Ratios Spanning 0.08 to 0.67

The US Department of Energy (DOE) Nuclear Energy Research Initiative funded the design and construction of the Seven Percent Critical Experiment (7uPCX) at Sandia National Laboratories. The start-up of the experiment facility and the execution of the experiments described here were funded by the DOE Nuclear Criticality Safety Program. The 7uPCX is designed to investigate critical systems with fuel for light water reactors in the enrichment range above 5 % 235 U. The 7uPCX assembly is a water-moderated and -reflected array of aluminum-clad square-pitched U(6.90 %)O 2 fuel rods. Other critical experiments performed in the 7uPCX assembly are documented in LEU-COMP-THERM-078, LEU-COMP-THERM-080, LEU-COMPTHERM- 096, LEU-COMP-THERM-097, and LEU-COMP-THERM-101. The fuel used in these experiments was fabricated using unirradiated 6.90 % enriched UO 2 fuel pellets from fuel elements designed to be used in the internal nuclear superheater section of the Pathfinder boiling water reactor operated in South Dakota by the Northern States Power Company in the 1960s. The fuel elements were obtained from The Pennsylvania State University where they had been stored for many years. The fuel pellets in those fuel elements were removed from the original Incoloy cladding and reclad in 3003 aluminum tubes and end caps for use in the experiments reported here. The purpose of these experiments was to measure the effects of decreasing the fuel-to-water volume ratio on the critical array size. This was accomplished by removing fuel rods from fully fueled configurations, effectively increasing the pitch of the fuel arrays in the assembly. The fuel rod pitch variations provided assembly configurations that ranged from strongly undermoderated to slightly overmoderated.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Enabling BWR fuel rod analysis in the BISON fuel performance code

Nuclear fuel vendors around the world are pursuing approaches to sustain the existing nuclear reactor fleet consisting primarily of pressurized-water reactors (PWRs) and boiling-water reactors (BWRs). To support the industry's efforts, advanced modeling and simulation tools need to be capable of analyzing both legacy reactor concepts. BWR fuel rods are significantly different than those used in PWRs, which can affect fuel performance analysis. BWR fuel rods include: (1) an extensive use of gadolinia dopant as a burnable absorber, (2) an axial variation in fuel enrichment and gadolinia content, (3) the inclusion of a liner on the inner cladding surface to mitigate the impact of pellet-clad mechanical interaction (which impacts hydrogen and hydride distribution), (4) a lower initial fill gas pressure, (5) bottom-entry control rods, and (6) a lower coolant pressure that results in the two-phase flow boiling phenomenon. Although the primary focus of BISON has been in the area of PWR and advanced reactor fuel analyses, this paper presents the developments in BISON to support BWR fuel performance analysis. An overview of the models that account for the effects of gadolinia is highlighted. Internal mesh generation capabilities to include a liner is presented. Normal operating and transient (reactivity insertion accident) demonstration problems are presented to illustrate the impact of gadolinia, the hydrogen and hydride evolution due to the presence of the liner, and BISON's ability to simulate axially varying enrichments and dopant concentration. Bottom-entry control effects are captured by the axial power peaking factors present in the demonstration cases. Comparisons to integral experiments from the Halden IFA-681 experiments are discussed as initial validation. Reasonable comparisons are obtained for fuel centerline temperature and rod internal pressure as a function of time. In conclusion, simulations of additional experiments containing Gd 2 O 3 -bearing fuel are necessary to completely validate the code for BWR applications.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Measurement of light-by-light scattering and search for axion-like particles with 2.2 nb -1 of Pb+Pb data with the ATLAS detector

This paper describes a measurement of light-by-light scattering based on Pb+Pb collision data recorded by the ATLAS experiment during Run 2 of the LHC. The study uses 2.2 nb -1 of integrated luminosity collected in 2015 and 2018 at s N N = 5.02. Light-by-light scattering candidates are selected in events with two photons produced exclusively, each with transverse energy E T &#x03B3;<!-- γ --> > 2.5 GeV, pseudorapidity |η γ | < 2.37, diphoton invariant mass m γγ > 5 GeV, and with small diphoton transverse momentum and diphoton acoplanarity. The integrated and differential fiducial cross sections are measured and compared with theoretical predictions. The diphoton invariant mass distribution is used to set limits on the production of axion-like particles. This result provides the most stringent limits to date on axion-like particle production for masses in the range 6–100 GeV. Cross sections above 2 to 70 nb are excluded at the 95% CL in that mass interval.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗