Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Exertion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Manganese exposure from spring and well waters in the Shenandoah Valley: interplay of aquifer lithology, soil composition, and redox conditions

Manganese (Mn) is of particular concern in groundwater, as low-level chronic exposure to aqueous Mn concentrations in drinking water can result in a variety of health and neurodevelopmental effects. Much of the global population relies on drinking water sourced from karst aquifers. Thus, we seek to assess the relative risk of Mn contamination in karst by investigating the Shenandoah Valley, VA region, as it is underlain by both karst and non-karst aquifers and much of the population relies on water wells and spring water. Water and soil samples were collected throughout the Shenandoah Valley, to supplement pre-existing well water and spring data from the National Water Information System and the Virginia Household Water Quality Program, totaling 1815 wells and 119 springs. Soils were analyzed using X-ray fluorescence and Mn K-Edge X-ray absorption near-edge structure spectroscopy. Factors such as soil type, soil geochemistry, and aquifer lithology were linked with each location to determine if correlations exist with aqueous Mn concentrations. Analyzing the distribution of Mn in drinking water sources suggests that water wells and springs within karst aquifers are preferable with respect to chronic Mn exposure, with < 4.9% of wells and springs in dolostone and limestone aquifers exceeding 100 ppb Mn, while sandstone and shale aquifers have a heightened risk, with > 20% of wells exceeding 100 ppb Mn. The geochemistry of associated soils and spatial relationships to various hydrologic and geologic features indicates that water interactions with aquifer lithology and soils contribute to aqueous Mn concentrations. Relationships between aqueous Mn in spring waters and Mn in soils indicate that increasing aqueous Mn is correlated with decreasing soil Mn(IV). These results point to redox conditions exerting a dominant control on Mn in this region.

54 ENVIRONMENTAL SCIENCES↗

Analytical substantiation of the safety of modern water-development works and characteristics of consideration of effects due to production equipment during an earthquake

A modern approach is proposed for analytical investigation of the stress-strain state, strength, and stability of water-development works. Actual trends in the refinement of analytical investigations are noted: incorporation of parallel-calculation technology, integration of analytical programs and automated design systems, development of structural analyses, etc. A procedure for consideration of the influence exerted by massive production equipment on the stress-strain state of a structure DURING a seismic event is examined.

42 ENGINEERING↗

Numerical-Model Investigation of the Hydrothermal Regime of a Straight-Through Shallow Cooling Pond

A mathematic model based on solution of hydrodynamics and heat-transfer equations by the finite-element method is constructed to predict the hydrothermal regime of a straight-through shallow cooling pond, which provides cooling circulating water to a repository of spent nuclear fuel. Numerical experiments made it possible to evaluate the influence exerted by wind conditions and flow rate of water in the river on the temperature of the circulating water.

42 ENGINEERING↗

Highly Selective Recognition of Cd{sup 2+} by an Indole Derivative Chemosensor

A novel chemosensor exhibiting highly selective recognition of Cd {sup 2+} over other metal ions with significant fluorescence quenching was designed and synthesized by a click reaction of dialkyne and indole azide precursors. The compound was identified by {sup 1}H NMR, {sup 13}C NMR, MS, and UV-vis spectroscopy. The fluorescence quenching phenomenon was observed with the addition of Cd {sup 2+}. The reaction conditions, including the selectivity, the amount of Cd {sup 2+}, reaction time, and temperature, were optimized in the article. The product exerted highly selective fluorescence change in the presence of Cd {sup 2+} over other metal ions, such as Li{sup +}, Na{sup +}, K{sup +}, Pb{sup 2+}, Ni{sup 2+}, Zn{sup 2+}, Mn{sup 2+}, Hg{sup 2+}, Cr{sup 3+}, Cu{sup 2+}, and Fe{sup 3+}. Under the optimal conditions, a linearly proportional relationship between fluorescence intensity and the concentration of Cd{sup 2+} was revealed in the range from 0 to 7.226 × 10{sup –5} M. The limit of detection was 2.69 μM. The results suggest that the substance synthesized with 2-methylindole is a novel and quick detector for Cd {sup 2+}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Role of Inelastic Electron–Phonon Scattering in Electron Transport through Ultra-Scaled Amorphous Phase Change Material Nanostructures

The electron transport through ultra-scaled amorphous phase change material (PCM) GeTe is investigated by using ab initio molecular dynamics, density functional theory, and non-equilibrium Green’s function, and the inelastic electron–phonon scattering is accounted for by using the Born approximation. It is shown that, in ultra-scaled PCM device with 6 nm channel length, < 4 % of the energy carried by the incident electrons from the source is transferred to the atomic lattice before reaching the drain, indicating that the electron transport is largely elastic. Our simulation results show that the inelastic electron–phonon scattering, which plays an important role to excite trapped electrons in bulk PCM devices, exerts very limited influence on the current density value and the shape of current–voltage curve of ultra-scaled PCM devices. The analysis reveals that the Poole–Frenkel law and the Ohm’s law, which are the governing physical mechanisms of the bulk PCM devices, cease to be valid in the ultra-scaled PCM devices.

Environmental Molecular Sciences Laboratory↗

Growth of Silicon Carbide Nanolayers on Contact of Porous Carbon with Molten Silicon

The mathematical model of the growth of a silicon carbide layer includes two diffusion equations for silicon and carbon atoms and an equation describing the motion of the chemical conversion front. Analytical estimates and results of calculations are presented. Parametric calculations for different values of silicon solubility in silicon carbide are carried out. It is shown that the effective density of carbon exerts its influence on the duration of the process of silicon impregnation and the composite morphology.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A Method to Alleviate the Long History Problem Encountered in Monte Carlo Simulations via Weight Window Variance Reduction

When the weight window is implemented in large and complex models, streaming path and deep penetration could lead to a long history problem that takes a disproportionate amount of time for the accomplishment of Monte Carlo simulations and exerts a detrimental effect on the efficiency of parallel computing. An approach set the limitation of weight window splitting was proposed for the alleviation of long history problem. Tests were conducted on a streaming dog-leg geometry model and a 3D model of the Chinese Fusion Engineering Testing Reactor. The results show that a suitable parameter in the alleviation method could optimize both the performance of variance reduction and the efficiency of parallel calculation, which makes long history problem tractable.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Exploration of the Effect of Chitosan and Crosslinking Agent Concentration on the Properties of Dual Responsive Chitosan-g-Poly (N-Isopropylacrylamide) Co-polymeric Particles

The objective of the present study was to synthesize and evaluate the effect of change in concentration of chitosan (CS) and N,N-methylenebisacrylamide (MBA)- a cross linking agent, on various properties such as lower critical solution temperature (LCST), zeta potential, particle size and poly dispersity index (PDI) of the synthesized co-polymer. Nine different formulations of chitosan-g-poly (N-isopropylacrylamide) (CS-g-PNIPAAm) co-polymer with varying CS and MBA concentrations were synthesized by a surfactant free dispersion copolymerization method. The synthesized co-polymer was further characterized and confirmed for its structure, morphology, particle size, zeta-potential, thermo and pH responsive properties, in-vitro cyto-compatability and stability studies using various analytical tools. The data confirms the successful synthesis of co-polymer. The increase in the concentrations of CS and MBA during the polymerization of co-polymer, resulted in proportional increase of LCST and zeta potential with decrease in particle size of co-polymeric nanoparticles. pH responsive studies showed that as the pH of the medium increases particle size and zeta potential decreases with increase in LCST of co-polymeric nanoparticles. From the results, it can be inferred that the synthesized co-polymeric nanoparticles exerted thermo and pH responsive properties with biocompatibility. By varying the CS and MBA concentrations in the co-polymer, desired LCST, particle size and zeta potential for co-polymeric nanoparticles can be obtained and thus the synthesized co-polymer may have great potential to be used as a drug carrier (nanoform) with both thermo and pH responsiveness.

36 MATERIALS SCIENCE↗

Development of Biocomposite Superabsorbent Nanomaterials: Effect of Processing Technique

Nanoclay particles have been usually introduced into protein-based bioplastics to obtain composite materials, showing enhanced mechanical properties. However, the addition of partially exfoliated nanoclay particles in these protein matrices may also involve an increase of others properties such as water absorption capacity, which may lead to the obtention of super absorbent biodegradable materials. Processing technologies exerted a remarkable influence on the techno-functional properties of the soy-based bioplastics studied in this research. On the one hand, extrusion technique led to bioplastics which showed enhanced mechanical properties. On the other hand, injection moulding technique yielded to non-exfoliated nanoclay particles within the protein matrix, which involved improvements of water absorption capacity. The development of superabsorbent protein-based biodegradable materials implied a deep knowledge of physicochemical properties of proteins and processing conditions of bioplastics. Extrusion or injection moulding techniques could be selected to obtain tailored protein-based bioplastics with enhanced properties.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Antifungal Activity of Polyhexamethyleneguanidine Derivatives Introduced into Biodegradable Polymers

Experiments were conducted to investigate the antifungal activities of polyhexamethyleneguanidine (PHMG) derivatives introduced into polylactide (PLA), polyhydroxybutyrate (PHB) and polycaprolactone (PCL) against Aspergillus niger, Penicillium chrysogenum and Candida albicans. All of the PHMG derivatives inhibited the germination of A. niger and P. chrysogenum. All of the derivatives exerted a much stronger inhibitory effect on the cells of C. albicans. PHMG granular polyethylene wax (at the concentration of 1.0%) has a fungicidal effect. The reduction in the number of yeast cells capable of growing on the surface composites PLA, PHB and PCL with PHMG granular polyethylene wax for 24 h was R > 2. PHMG derivatives introduced into PLA decreased hydrolases activity in A. niger and P. chrysogenum. All of the PHMG derivatives introduced into all investigated polymers inhibited the hydrolases activity in C. albicans proportionately to concentration. PHMG granular polyethylene wax at a concentration of 1.0% most strongly inhibited hydrolases activity in yeast. The composites produced from PLA, PHB, PCL and this PHMG derivatives can be used in many areas to reduce the growth of yeast. The studied composites can potentially be used for the production of biomedical or packaging materials. Graphical Abstract: PHMG derivates introduced into polymer have slightly biocidal properties against molds and strong against yeast. The composites produced from PLA, PHB, PCL and this PHMG derivatives can be used in the many areas to reduce the growth of yeast. The studied composites can potentially be used for the production of biomedical or packing materials. .

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Abiotic Hydrolysis and Compostability of Blends Based on Cassava Starch and Biodegradable Polymers

When associated with polymer blends, starch may improve the biodegradability and compostability of other materials. The objectives of this work were to evaluate the abiotic hydrolysis and the composting process of films obtained from polymer blends between thermoplastic starch (TPS) and three other biodegradable polymers: poly[(butylene adipate)- co -(terephthalate)] (PBAT), poly(lactic acid) (PLA) and polyvinyl alcohol (PVA). PVA/TPS stood out as the most homogeneous blend and the one that showed the highest weight loss, with 46.21% of its initial weight remaining after abiotic hydrolysis tests. On the other hand, PBAT/TPS and PLA/TPS underwent more drastic and rapid degradation during composting in contrast to PVA/TPS. They became very fragmented after 21 days of composting, while the PVA/TPS was visually modified but remained unbroken until day 70. No blend sample exerted negative effects on the quality of the compost.

36 MATERIALS SCIENCE↗

Effect of High-Gradient Magnetic Field on Electrical Property of Carbon Nanotube-Polypyrrole Composite; Nanotube Separation Mechanism

High- and low-gradient magnetic fields are produced by resistor-inductor-capacitor (RLC) discharge apparatuses. The maximum magnetic field is 12.5 Tesla with 1-ms pulse duration. Multiwall carbon nanotube–polypyrrole composite is prepared. The samples are exposed to high- and low-gradient magnetic fields. To understand the behavior of carbon nanotubes (CNTs) in high-gradient magnetic fields (HGMFs), we theoretically calculated the equivalent magnetic susceptibility of a CNT in the gradient magnetic field. We found that the gradient force which is exerted on a CNT could be repellent or absorbent depending on the parallel and perpendicular susceptibilities of the CNT, as well as on the initial orientation of the CNT with respect to magnetic field direction. Four-probe studies show that the electrical conductivity of CNT composites decreases after exposure to a high-gradient magnetic field. Microscopic observation of the electrical current profile of composites reveals rearrangement of CNTs under HGMF.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modulating the Electronic Properties and Magnetism of Bilayer Phosphorene with Small Gas Molecules Adsorbing

First-principles calculations based on the density functional theory have been performed to investigate the physisorption of small gas molecules, including CO, H{sub 2}, H{sub 2}O, NH{sub 3}, NO, NO{sub 2}, and O{sub 2}, on the surface of bilayer phosphorene. The calculated results show that (1) CO, NH{sub 3}, NO, and O{sub 2} molecules act as charge donors, whereas H{sub 2}O, H{sub 2}, and NO{sub 2} molecules serve as charge acceptors. (2) The interaction between O{sub 2} molecule and bilayer phosphorene is strongest among all the researched gas molecules.(3) The physisorption of gas molecules on bilayer phosphorene produces prominent charge transfer, which not only makes phosphorene a promising candidate as a gas sensor, but also provides a valid approach to changing the polarity of phosphorene. (4) The band structure of phosphorene is also modulated by decorating with gas molecules, the NO, O{sub 2}, and NO{sub 2} adsorbed bilayer phosphorene system exhibits magnetism, and NO (O{sub 2})-adsorbed phosphorene is a typical n(p)-type semiconductor. (5) In addition, the band gap of CO/H{sub 2}O adsorbed bilayer phosphorene decreases by exerting increasing external electric fields, which suggests that applying an external electric field would be an effective way to tune the electronic properties of phosphorene and broaden the way to the application of phosphorene in nanoelectronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural Confinement Assisted a Robust Superparamagnetic State in MgNi{sub 2}O{sub 3} and MgNi{sub 1.5}Co{sub 0.5}O{sub 3} Nanoparticles at Room Temperature

In this study, ideal spherical-shaped cubic metal oxide nanoparticles of < 30 nm in size were prepared by a citric acid sol-gel combustion method. The detailed structural analysis and microscopic techniques clearly support the existing grade of structural confinement effect in MgNi{sub 2}O{sub 3} and MgNi{sub 1.5}Co{sub 0.5}O{sub 3}. Temperature-dependent magnetisation studies at various applied fields revealed a moderate change of T{sub B} near room temperature by distinct particle size. Magnetic crystalline anisotropy and energy barrier density theoretical model results suggested the importance of innermost magnetic particle stability-aided spin orientation with a fascinating magnetic moment in superparamagnetic region exerted by Ni and Co remarkably postured as a significant part of these nanoparticles.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evaluating ecosystem water use efficiency under drought stress: a case study of the Helan Mountain region, northwest China

Context Water use efficiency (WUE) is a fundamental ecological indicator links carbon assimilation and water loss in terrestrial ecosystems. Understanding its responses to drought stress is essential for adaptive ecosystem management, particularly in climate-sensitive mountain landscapes. Objectives This study aimed to investigate drought-driven variations in WUE across major vegetation types in the Helan Mountain region of Northwest China. Specifically, we sought to identify dominant ecological drivers of WUE variability and to disentangle their relative importance and causal pathways. Methods We quantified WUE using the Moderate Resolution Imaging Spectroradiometer (MODIS) products and the Drought Severity Index (DSI) data from 2001 to 2020. To examine WUE – drought relationships across contrasting vegetation types, we employed a spatially explicit analytical framework integrating Random Forest (RF) modeling, partial correlation analysis, and structural equation modeling (SEM). Results Regional WUE exhibited relatively stable interannual dynamics, yet pronounced spatial heterogeneity that was strongly modulated by drought conditions. Vegetation properties, particularly Leaf Area Index (LAI) and Normalized Difference Vegetation Index (NDVI), emerged as the dominant determinants of WUE, with NDVI alone explaining over 20% of its spatial variance in forest and grassland during non-drought periods. SEM analyses revealed that climate forcing influenced WUE mainly through indirect pathways mediated by soil moisture availability and vegetation structural dynamics, rather than through direct climatic controls. Among all regulating factors, LAI acted as the central control node governing ecosystem carbon–water coupling. In contrast, short-term climatic stress, especially atmospheric demand and drought duration, exerted weak or negative direct effects on WUE. Ecosystem-specific responses were observed, with croplands mainly regulated by soil water availability, whereas forests and grasslands showed more sensitive to atmospheric drought stress. Together, these results reveal a hierarchical control framework where soil–vegetation interactions mediate climate impacts on WUE, driving strong spatial heterogeneity in drought responses across mountain landscapes. Conclusions Our findings highlight the pivotal role of indirect drought effects mediated by vegetation and soil processes in shaping ecosystem WUE. The identified soil–vegetation–climate regulatory hierarchy provides mechanistic insight into landscape–scale drought sensitivity and supports integrated modeling approaches for evaluating ecosystem resilience and sustainable management in arid mountain regions.

China↗

Quantum chemical analysis of mechanisms of phenylacetylene and styrene hydrogenation to ethylbenzene on the Pd{111} surface

The mechanisms of the hydrogenation of phenylacetylene and styrene to ethylbenzene on the Pd{111} surface, which are secondary reactions of the selective hydrogenation of phenylacetylene, were studied by the DFT-PBE method. The position of the Ph group of the styrene molecule with respect to the Pd surface is shown to exert a noticeable effect on the mechanism of the process. If the Ph group is adsorbed on the Pd surface, then the addition of the first H atom to the terminal C atom of the styrene molecule is most probable. If Ph does not contact the surface, then the most substituted C atom of the styrene molecule is first hydrogenated. On the whole, the interaction of the Ph group with the Pd{111} surface results in stable adsorption structures, the hydrogenation of which on the Pd{111} surface is strongly hindered. The Gibbs activation energy (ΔG{sup ≠}{sub 298}) is 22.9 and 27.1 kcal mol{sup –1} in the most probable reaction routes of styrene hydrogenation to ethylbenzene and direct hydrogenation of phenylacetylene to ethylbenzene, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Liquid-phase oxidation of cyclohexane. Elementary steps in the developed process, reactivity, catalysis, and problems of conversion and selectivity

The literature data concerning features of the kinetics and mechanisms of elementary steps of liquid-phase oxidation of cyclohexane and its oxygen derivatives are considered and analyzed. A comparison of rates of intermolecular and intramolecular reactions of cyclohexylperoxyl radicals under the industrial conditions indicated a necessity to take into account intramolecular interactions. The occurrence of cross recombination of hydroperoxyl and α-hydroxyperoxyl radicals without chain termination in the course of cyclohexanol and 2-hydroxycyclohexanol oxidation was proved. A significance of degenerate branching reactions involving cyclohexyl hydroperoxide in the industrial process of cyclohexane oxidation at 423 K was evaluated. The influence of the electron-withdrawing functional groups on the reactivity of carbon–hydrogen bonds of organic compounds in the reactions with electrophilic peroxyl radicals was studied. The low conversion of a substrate in the industrial process are mainly caused by the radicalchain oxidation of cyclohexanone leading only to by-products. The catalysts of cyclohexane oxidation, viz., compounds of variable valence metals, affect the reaction rate and ratio of the yields of the target products (cyclohexyl hydroperoxide, cyclohexanol, and cyclohexanone) but exert no effect on their relative reactivity. The use of the catalytic additives increasing the yield of cyclohexanone in the step of cyclohexane oxidation in the production of caprolactam is revealed to be inexpedient.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrochemical transformations and antiradical activity of asymmetrical RS-substituted pyrocatechols

Redox transformations of sulfides 1–8 combining a fragment of sterically hindered pyrocatechol with alkyl, cycloalkyl, and aromatic substituents were studied. The first step of electrooxidation of thioethers affords o-benzoquinones. The introduction of the redox-active thioether group extends the range of redox properties of pyrocatechols. In the second step, the thioether fragment is involved in the quasi-reversible anodic process, and the number of electrons participating in the electrode reaction depends on the structure of the hydrocarbon group bonded to the sulfur atom. The reactivity of compounds 1–8 toward O{sub 2}{sup •–} was evaluated on the basis of the electrochemical data. Cyclopentyl, phenyl, or benzyl substituents in the thioether group exert a greater effect on the antiradical activity than the alkyl moieties. The formation of an o-semiquinolate radical anion in the reaction of pyrocatechol thioethers with KO{sub 2} was detected by the ESR method. It was shown using the reaction with the stable 2,2-diphenyl-1-picrylhydrazyl radical as an example that RS-functionalized pyrocatechols show a higher antiradical activity compared to 3,5-di-tert-butylpyrocatechol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗