Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Experimental evidence for the formation of CoFe{sub 2}C phase with colossal magnetocrystalline-anisotropy

Attainment of magnetic order in nanoparticles at room temperature is an issue of critical importance for many different technologies. For ordinary ferromagnetic materials, a reduction in size leads to decreased magnetic anisotropy and results in superparamagnetic relaxations. If, instead, anisotropy could be enhanced at reduced particle sizes, then it would be possible to attain stable magnetic order at room temperature. Herein, we provide experimental evidence substantiating the synthesis of a cobalt iron carbide phase (CoFe{sub 2}C) of nanoparticles. Structural characterization of the CoFe{sub 2}C carbide phase was performed by transmission electron microscopy, electron diffraction and energy electron spectroscopy. X-ray diffraction was also performed as a complimentary analysis. Magnetic characterization of the carbide phase revealed a blocking temperature, T{sub B}, of 790 K for particles with a domain size as small as 5 ± 1 nm. The particles have magnetocrystalline anisotropy of 4.6 ± 2 × 10{sup 6 }J/m{sup 3}, which is ten times larger than that of Co nanoparticles. Such colossal anisotropy leads to thermally stable long range magnetic order. Moreover, the thermal stability constant is much larger than that of the commonly used FePt nanoparticles. With thermal stability and colossal anisotropy, the CoFe{sub 2}C nanoparticles have huge potential for enhanced magnetic data storage devices.

36 MATERIALS SCIENCE↗

Effects of a modular two-step ozone-water and annealing process on silicon carbide graphene

By combining ozone and water, the effect of exposing epitaxial graphene on silicon carbide to an aggressive wet-chemical process has been evaluated after high temperature annealing in ultra high vacuum. The decomposition of ozone in water produces a number of oxidizing species, however, despite long exposure times to the aqueous-ozone environment, no graphene oxide was observed after the two-step process. The systems were comprehensively characterized before and after processing using Raman spectroscopy, core level photoemission spectroscopy, and angle resolved photoemission spectroscopy together with low energy electron diffraction, low energy electron microscopy, and atomic force microscopy. In spite of the chemical potential of the aqueous-ozone reaction environment, the graphene domains were largely unaffected raising the prospect of employing such simple chemical and annealing protocols to clean or prepare epitaxial graphene surfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multimodal microscopy of extended defects in β-Ga 2 O 3 (010) EFG crystals

Beta-phase gallium oxide (β-Ga 2 O 3 ) has attracted attention in recent years as a potentially low cost, large area substrate and active layer material for high power, high temperature power electronics and sensing devices. However, growth of β-Ga 2 O 3 crystals is complicated by easily activated (100) and (001) cleavage planes, the presence of low angle grain boundaries (LAGBs) and twins, and the potential formation of polycrystalline grains. In this study, β-Ga 2 O 3 crystals were grown by the edge-defined film-fed growth technique with an (010) principal face. Two crystals with apparently randomly formed high angle grain boundaries (HAGBs) were selected and analyzed by electron backscatter diffraction, electron channeling contrast imaging, and cathodoluminescence to investigate the nature of the LAGBs and the source of the HAGB formation. It was discovered that planar LAGBs lying parallel to the (010) plane exist in the region immediately preceding the start of an HAGB. Increased misorientation across the LAGB was observed, approaching the initiation of a new grain. We present multimodal microscopy characterization, correlating misorientation and variation in optoelectronic properties with LAGBs and the associated dislocations.

14 SOLAR ENERGY↗

Growth of high quality N-polar AlN(0001) on Si(111) by plasma assisted molecular beam epitaxy

High quality N-polar AlN epilayers were grown and characterized on Si(111) substrates by plasma assisted molecular beam epitaxy as a first step toward growth of N-polar nitrides on Si(111). Polarity inversion to N-face by an optimized predeposition of Al adatoms on the reconstructed 7x7 Si(111) surface was investigated. Al adatoms can saturate the dangling bonds of Si atoms, resulting in growth of AlN in (0001) direction on subsequent exposure to N{sub 2} plasma. N-polarity was confirmed by observing strong 3x3 and 6x6 reflection high-energy electron diffraction reconstructions, convergent beam electron diffraction imaging and KOH etching studies. The structural properties were investigated by x-ray diffraction measurements, cross section and plan-view TEM studies.

36 MATERIALS SCIENCE↗

Highly ordered Co{sub 2}FeSi Heusler alloys grown on Ge(111) by low-temperature molecular beam epitaxy

We demonstrate high-quality epitaxial growth of Heusler alloy Co{sub 2}FeSi on Ge(111) by molecular beam epitaxy (MBE) at 200 deg. C. Even for growth at such a low temperature, L2{sub 1}-ordered crystal structure is formed and highly uniform magnetic environments around the Fe sites are realized, by transmission electron diffraction and conversion electron Moessbauer spectroscopy, respectively. We also find that the magnetic moment reaches 5.37 {mu}{sub B}/f.u., which is the highest value in thin-film Co{sub 2}FeSi samples reported.

36 MATERIALS SCIENCE↗

New ramsdellites LiTi{sub 2-y}V{sub y}O{sub 4} (0<=y<=1): Synthesis, structure, magnetic properties and electrochemical performances as electrode materials for lithium batteries

The new ramsdellite series LiTi{sub 2-y}V{sub y}O{sub 4} (0<=y<=1) has been prepared by conventional solid state chemistry techniques and was characterized by X-ray powder diffraction and electron diffraction. To our knowledge, this is the first report on ramsdellites containing vanadium. The magnetic behaviour of these ramsdellites is strongly influenced by its vanadium content. In this sense, LiTi{sub 2}O{sub 4} (y=0) exhibits metallic-like temperature independent paramagnetism, but d electrons tend to localize with increasing V content. LiTiVO{sub 4}, though also paramagnetic, follows then the Curie-Weiss law. The crossover from delocalized to localized electrons is observed between compositions y=0.6 and 0.8. For y>=0.8 the magnetic results evidence an isovalent substitution mechanism of trivalent Ti by V. The electrochemical lithium intercalation and deintercalation chemistry of LiTi{sub 2-y}V{sub y}O{sub 4} is grouped into two different operating voltage regions. Reversible lithium deintercalation of vanadium-substituted ramsdellite titanates LiTi{sub 2-y}V{sub y}O{sub 4} in the high voltage range 2-3 V vs. Li occurs in two main steps, one at about 2 V and the other at about 3 V. The 3 V process capacity increases with the vanadium content, while the 2 V capacity decreases at the same time. The vanadium to titanium substitution rate in LiTi{sub 2}O{sub 4} was found to be beneficial to the specific energy in as much as a 50% increase (1 V) of the working voltage is observed. On the other hand, reversible lithium intercalation in vanadium-substituted ramsdellite titanates LiTi{sub 2-y}V{sub y}O{sub 4} in the low voltage range 1-2 V vs. Li occurs in one main single step, in which the capacity is not affected by the vanadium content, although vanadium-doping produces an improved capacity retention with an excellent cycling behaviour observed for y<=0.6. - Graphical abstract: Ti-based ramsdellite compounds can make up cathode and anode materials for lithium batteries by introducing vanadium. Lithium deinsertion experiments on LiTi{sub 2-y}V{sub y}O{sub 4} materials develop a high operating voltage (3 V) useful as the cathode, while lithium insertion experiments yield a low operating voltage, 1.5 V, useful as the anode. Vanadium-rich compounds show specific theoretical capacity values in the high voltage range that are even comparable to those reported for LiFePO{sub 4} which is presently one of the preferred cathode materials for lithium batteries.

36 MATERIALS SCIENCE↗

Multimodal Analysis of Spatially Heterogeneous Microstructural Refinement and Softening Mechanisms in Three-Pass Friction Stir Processed Al4Si Alloy

Multiple thermally and thermomechanically induced microstructural refinement mechanisms can be activated in metallic alloys when subjected to solid phase processing methods such as friction stir processing (FSP). In this work, we provide detailed descriptions of the relationship between region-specific microstructural refinement mechanisms and the variation in microhardness, through a systematic and multimodal microstructural characterization of an FSP-processed 75% cold-rolled Al-4 at.% Si model binary alloy. Spatially resolved high-energy synchrotron X-ray diffraction, electron backscattered diffraction, and scanning transmission electron microscopy were used to understand the spatially heterogeneous microstructural evolution due to FSP. Results provide insights into how mechanisms such as static recovery, static recrystallization, dynamic recovery and recrystallization, geometric and continuous dynamic recrystallization, and particle-stimulated static or dynamic grain nucleation may occur heterogeneously in the microstructure as a function of the distance from the stir zone in processed alloys, directly influencing the degree of softening. The systematic analysis of microstructures and hardness in the FSP-processed model binary alloy given in this work highlights the rich microstructural domains that can be uniquely harnessed through solid phase processing of metallic alloys.

Al4Si, Friction Stir Processing, Geometric Dynamic↗

Self-imaging of molecules from diffraction spectra by laser-induced rescattering electrons

We study high-energy angle-resolved photoelectron spectra of molecules in strong fields. In an oscillating laser electric field, electrons released earlier in the pulse may return to recollide with the target ion, in a process similar to scattering by laboratory prepared electrons. If midinfrared lasers are used, we show that the images generated by the returning electrons are similar to images observed in typical gas-phase electron diffraction (GED). These spectra can be used to retrieve the positions of atoms in a molecule as in GED. Since infrared laser pulses of durations of a few femtoseconds are already available today, the study of these high-energy photoelectrons offers the opportunity of imaging the structure of transient molecules with temporal resolution of a few femtoseconds.

74 ATOMIC AND MOLECULAR PHYSICS↗

Examining the multi-scale complexity and the crystallographic hierarchy of isothermally treated bainitic and martensitic structures

In this work, differences and similarities between bainitic and martensitic structures obtained by isothermal heat treatments such as austempering, quench and partitioning (Q&P) and quench and tempering (Q&T), are investigated by multiple techniques including X-ray diffraction, electron backscatter diffraction, scanning and transmission electron microscopy and atom probe tomography. Additionally, results reveal that analogous lath-like ferritic structures with similar austenite content can be achieved by adjusting the isothermal holding temperature. However, certain variability in hardness is recorded, which is consistent with differences on the precipitation state revealed by the nano-scale examination of the structure, and with dissimilar crystallographic size distribution of ferritic grains.

36 MATERIALS SCIENCE↗

Alloying effects on deformation induced microstructure evolution in copper

In this work, we investigated the effects of alloying elements on plastic deformation and microstructure evolution in polycrystalline copper (Cu) and Cu alloyed with 1 wt. % lead (Cu-1 %Pb). These materials were selected due to the size mismatch between Cu and Pb, with the latter forming precipitates at grain boundaries. Multi-modal characterization techniques, including neutron diffraction, electron backscatter diffraction (EBSD), and transmission electron microscopy (TEM), along with finite element simulations were employed to study the deformation behavior across multiple length scales. While both Cu and Cu-1%Pb exhibited similar macroscale response and final deformation textures, both dislocation line profile analysis and TEM revealed increased dislocation density in deformed Cu-1%Pb specimens. The presence of lead precipitates also significantly affected local plastic deformation during compression, with their influence diminishing with increasing strain. These results demonstrate the complex relationships between alloying elements, plastic deformation, microstructural evolution, and material behavior under load. The insights gained from this multi-scale and multi-technique approach contribute to the fundamental understanding of microstructural evolution in immiscible alloys and are valuable for tailoring the properties of structural materials for specific engineering applications.

36 MATERIALS SCIENCE↗

Structure Evolution and Distributions of Grain-Boundary Misorientainons in Submicrocrystalline Molybdenum Irradiated with a Pulsed Electron Beam

Using the methods of electron backscatter diffraction, electron microscopy and X-ray diffraction analysis, it is demonstrated that irradiation of the surface of a submicrocrystalline molybdenum specimen with a pulsed electron beam in a non-melt regime results in the formation of a gradient structure in its bulk. The irradiation temperature is shown to affect the density of defects, the value of stress, and the distributions of grain-boundary misorientations in the surface and bulk of the submicrocrystalline molybdenum specimens.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural study of growth, orientation and defects characteristics in the functional microelectromechanical system material aluminium nitride

The real structure and morphology of piezoelectric aluminum nitride (AlN) thin films as essential components of magnetoelectric sensors are investigated via advanced transmission electron microscopy methods. State of the art electron diffraction techniques, including precession electron diffraction and automated crystal orientation mapping (ACOM), indicate a columnar growth of the AlN grains optimized for piezoelectric application with a (0 0 0 1) texture. Comparing ACOM with piezoresponse force microscopy measurements, a visual correlation of the structure and the piezoelectric properties is enabled. With a quantitative analysis of the ACOM measurements, a statistical evaluation of grain rotations is performed, indicating the presence of coincidence site lattices with Σ7, Σ13a, Σ13b, Σ25. Using a geometric phase analysis on high resolution micrographs, the occurrence of strain is detected almost exclusively at the grain boundaries. Moreover, high resolution imaging was applied for solving the atomic structure at stacking mismatch boundaries with a displacement vector of 1/2 〈1 0 -1 1〉. All real structural features can be interpreted via simulations based on crystallographic computing in terms of a supercell approach.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nitrogen-induced reconstruction and faceting of Re(112{sup ¯}1)

The surface morphology of Re(112{sup ¯}1), tailored on the nanometer scale by kinetic control of nitrogen, has been investigated using low energy electron diffraction, scanning tunneling microscopy, Auger electron spectroscopy, and density functional theory (DFT) in combination with the ab initio atomistic thermodynamics approach. Experiments show that when exposing to NH{sub 3} (>0.5 L) at 300 K followed by annealing in ultra-high vacuum at 700 K or 900 K, the initially planar Re(112{sup ¯}1) surface becomes (2 × 1) reconstructed or partially faceted, respectively. Upon annealing in 100 L NH{sub 3} at 900 K, Re(112{sup ¯}1) becomes fully faceted and covered by N. The fully faceted surface consists of two-sided ridges formed by (134{sup ¯}2) and (314{sup ¯}2) facets. The (2 × 1) reconstruction may serve as a precursor state for faceting of Re(112{sup ¯}1). The DFT calculations provide an atomistic understanding of facet formation in terms of binding sites and energies of N on Re surfaces of the substrate and facets as well as the corresponding surface phase diagram. The N-covered faceted Re(112{sup ¯}1) surfaces are promising nanoscale model catalysts and nanotemplates. Our findings should be of importance for the design and development of Re-based heterogeneous catalysts operating under nitrogen-rich conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Epitaxial growth of aluminum nitride on AlGaN by reactive sputtering at low temperature

We report the synthesis of 1 {mu}m thick single crystalline aluminum nitride films by dc magnetron sputtering on AlGaN/GaN layer grown on sapphire substrate at low temperature (substrate temperature <250 deg. C). The microstructure of c-axis oriented AlN films deposited on Si (100) and AlGaN <0001> substrates was studied by x-ray diffraction, selected area electron diffraction, and transmission electron microscopy. The optimization of process parameters, involving low energetic ion bombardment on film surface (20-30 eV) during the growth, leads to an increase in the surface mobility and thus promotes AlN epitaxial growth on AlGaN substrate at 250 deg. C.

36 MATERIALS SCIENCE↗

Combined electron backscatter diffraction and cathodoluminescence measurements on CuInS{sub 2}/Mo/glass stacks and CuInS{sub 2} thin-film solar cells

Electron backscatter diffraction (EBSD) and cathodoluminescence (CL) measurements in a scanning electron microscope were performed on cross sections of CuInS{sub 2} thin films and ZnO/CdS/CuInS{sub 2}/Mo/glass thin-film solar cells. The CuInS{sub 2} layers analyzed for the present study were grown by a rapid thermal process. The regions of the CuInS{sub 2} layers emitting high CL intensity of band-band luminescence are situated near the top surface (or close to the interface with ZnO/CdS). This can be attributed to an enhanced crystal quality of the thin films in this region. The phenomenon may be related to the recrystallization via solid-state reactions with Cu{sub x}S phases, which is assumed to run from the top to the bottom of the growing CuInS{sub 2} layer. The distribution of CL intensities is independent of the sample temperature, the acceleration voltage of the electron beam, and of whether or not the ZnO/CdS window layers are present. When comparing CL images and EBSD maps on identical sample positions, pronounced intragrain CL contrast is found for individual grains. Also, it is shown that at random grain boundaries, the decreases in CL intensities are substantially larger than at {Sigma}3 grain boundaries.

36 MATERIALS SCIENCE↗

Electron backscatter diffraction analysis of a CZT growth tip from a vertical gradient freeze furnace

Electron backscatter diffraction (EBSD) was used to characterize the growth-tip region of a 4.2-cm diameter CdZnTe (CZT) boule grown using low-pressure Bridgman method in a vertical gradient freeze furnace. The boule was sectioned and polished and a section taken along the boule longitudinal centerline with an approximate surface area of 1-cm 2 was used for optical and scanning electron microscopy. A collage was assembled using EBSD/SEM images to show morphological features, e.g., twin structure, grain structure, and overall crystal growth direction. Severely twinned regions originating from the tip and side walls were observed. The overall growth orientation was close to (1 1 0) and (1 1 2) directions. In some regions, the (0 0 1) poles of the CZT matrix aligned with the growth direction, while twins aligned such that (1 1 1) and (1 1 2) poles aligned with the growth direction. Finally, in some other areas, (1 1 2) or (0 1 1) poles of the CZT matrix aligned with the growth direction. New relationships between the CZT matrix and large Te polycrystalline particles were revealed: {1 1 2 - } CZT ΙΙ{1 1 - 0 0} Te and {0 0 1} CZT II{0 1 - 1 - 1} Te .

58 GEOSCIENCES↗

V{sub 2.38}Nb{sub 10.7}O{sub 32.7}: A V{sub 2}O{sub 5}-Nb{sub 2}O{sub 5} mixed oxide tunnel structure related to the tetragonal tungsten bronzes

A crystal structural model for the orthorhombic compound V{sub 2.38}Nb{sub 10.7}O{sub 32.7}, which is known as 'V{sub 2}Nb{sub 9}O{sub 27.5}', was developed by means of selected area electron diffraction (SAED), Rietveld refinement and high resolution electron microscopy (HREM). The metastable compound is obtained by thermal decomposition of freeze-dried precursors as chain-like agglomerated nanoparticles or by reaction of V{sub 2}O{sub 5} with fresh-precipitated Nb{sub 2}O{sub 5} as more compact micro-scaled crystals. With the latter, it was possible to identify its structure for the first time (space group Cmmm). The tetragonal tungsten bronze (TTB)-type structure shows high potential for ionic intercalation, since easily reducible [V{sup 5+}{sub 2}O{sup 2-}] units are implemented in the tunnels of a rigid niobium oxide framework. - Graphical abstract: A crystal structural model for the orthorhombic compound V{sub 2.38}Nb{sub 10.7}O{sub 32.7}, which is known as 'V{sub 2}Nb{sub 9}O{sub 27.5}', was developed by means of selected area electron diffraction, Rietveld refinement and high resolution electron microscopy. In dependence on the synthesis method the metastable compound is obtained as chain-like agglomerated nanoparticles or as more compact micro-scaled crystals. V{sub 2.38}Nb{sub 10.7}O{sub 32.7} is the first and only example of a compound with a TTB-type structure (space group Cmmm) in the system V{sub 2}O{sub 5}-Nb{sub 2}O{sub 5}.

36 MATERIALS SCIENCE↗

Microstructural features and domain formation in (Ba,Sr){sub 2}TiSi{sub 2}O{sub 8} fresnoites

The formation and co-existence of crystallographically modulated and non-modulated regions in (Ba,Sr){sub 2}TiSi{sub 2}O{sub 8} fresnoites is reviewed, particularly the dependence on local composition. It is shown that perturbations of the average fresnoite structure, determined from appreciable single crystals, are in some cases better described as nanometric domain intergrowths where departures from ideal stoichiometry are characteristics of incommensuration, while modulation is absent from volumes that are less perturbed chemically. Evidence for this differentiation is obtained from selected area electron diffraction (SAED) patterns and high-resolution transmission electron microscopy (HRTEM) images. The domains are readily distinguished by their unique contrast in bright field electron micrographs. Fourier reconstructions of HRTEM images collected from areas with darker contrast show that modulation can change within relatively small volumes. Nearby areas with lighter contrast were found by SAED to be free of structural disorder and incommensurate reflections. - Graphical abstract: Fresnoite layers contain SiO{sub 4} and TiO{sub 5} polyhedra that undergo run rotation and tilting to create 3D, 4D and 5D structural modulations that can be directly observed by electron diffraction and high resolution imaging. Highlights: {yields}(Ba,Sr){sub 2}TiSi{sub 2}O{sub 8} fresnoites contain commensurate and incommensurate domains. > Departures in stoichiometry promote the formation of nanostructured domains. > Domains formation may provide a means for reducing strain in single crystals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗