Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EXAFS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Effects of annealing on the local structure of FE and Co in CoFeB/MgO/CoFeB tunnel junctions: An extended x-ray absorption fine structure study

Extended x-ray-absorption fine structure (EXAFS) was used to study the evolution of the local structure of Fe and Co as a function of annealing time in CoFeB/MgO/CoFeB magnetic tunnel junctions. EXAFS indicates B depletion and crystallization of the CoFeB layers within a few seconds of the post growth high temperature anneal. The decrease in first-shell Debye-Waller factor and hence the increase in structural order during annealing explains the increase in tunnel magnetoresistance observed as a result of post deposition annealing.

36 MATERIALS SCIENCE↗

The dedicated QEXAFS facility at the SLS: Performance and Scientific Opportunities

The SuperXAS beamline at the Swiss Light Source (SLS) features a permanently installed monochromator for quick scanning EXAFS (QEXAFS) spectroscopy in series with a conventional double crystal monochromator (DCM). All installed optical components like collimating and focussing mirrors can be used by both devices. The remote exchange of the monochromators is possible in less than five minutes while maintaining the beam geometry on the sample. The QEXAFS system allows fast absorption scans down to the millisecond range for the investigation of time dependent processes. Using a Si(111) channel cut crystal the energy range from 5-16 keV can be covered, with a Si(311) cut the range 9.5-30 keV. Usually a quick scanning interval of 0.1 deg. - 2 deg. in Bragg angle is selected, thus covering XANES, full EXAFS or multiple edge scans of e.g. all L-edges of a heavy element. Up to about 80 spectra per second can be collected, corresponding to a time resolution of 12.5 ms. The high intensity of the beamline even facilitates fluorescence measurements on dilute samples.

43 PARTICLE ACCELERATORS↗

Cadmium Chemical Form in Mine Waste Materials by X-ray Absorption Spectroscopy

This study examines the molecular form of cadmium (Cd) present in mine wastes by X-ray Absorption Spectroscopy (XAS; Cd>20 mg/kg) using the K-edge of Cd at the Photon Factory Advanced Ring (PF-AR), NW10A beam line at KEK-Tsukuba-Japan. Mine waste materials and zinc concentrate were analyzed for Cd by ICPMS prior to undertaking XAS (range 21-452 mg/kg). Model compounds (CdO, Cd(OH){sub 2}, CdCO{sub 3}, Cdacetate, CdS, Cdstearate, CdDEDTC) and samples were examined in solid form at 20 K. The XANES spectra showed similar E max values for both model compounds and samples. The EXAFS showed that Cd-S in CdS, gives a flatter spectrum in the extended region compared to Cd-O found with CdCO{sub 3}, CdO and Cd Stearate. Linear combination fitting with model Cd compounds did not give clear assignments of composition, indicating that more detailed EXAFS spectra is required as mineral forms containing Cd were present rather than simple Cd compounds such as CdCO{sub 3}. The Cd bond for a single shell model in mine waste sample matrices appears to be either Cd-O or Cd-S, or a combination of both. Comparison of molecular data from the XAS studies with bioaccessibility data giving a prediction of bioavailability for mine waste materials provides useful information about the significance of the cadmium form as a contaminant for health risk assessment purposes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A wavelet analysis for the X-ray absorption spectra of molecules

We present a Wavelet transform analysis for the X-ray absorption spectra of molecules. In contrast to the traditionally used Fourier transform approach, this analysis yields a 2D correlation plot in both R- and k-space. As a consequence, it is possible to distinguish between different scattering pathways at the same distance from the absorbing atom and between the contributions of single and multiple scattering events, making an unambiguous assignment of the fine structure oscillations for complex systems possible. We apply this to two previously studied transition metal complexes, namely iron hexacyanide in both its ferric and ferrous form, and a rhenium diimine complex, [ReX(CO){sub 3}(bpy)], where X = Br, Cl, or ethyl pyridine (Etpy). Our results demonstrate the potential advantages of using this approach and they highlight the importance of multiple scattering, and specifically the focusing phenomenon to the extended X-ray absorption fine structure (EXAFS) spectra of these complexes. We also shed light on the low sensitivity of the EXAFS spectrum to the Re-X scattering pathway.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Local structure of amorphous GaN{sub 1-x}As{sub x} semiconductor alloys across the composition range

Typically only dilute (up to {approx}10%) highly mismatched alloys can be grown due to the large differences in atomic size and electronegativity of the host and the alloying elements. We have overcome the miscibility gap of the GaN{sub 1-x}As{sub x} system using low temperature molecular beam epitaxy. In the intermediate composition range (0.10 < x < 0.75), the resulting alloys are amorphous. To gain a better understanding of the amorphous structure, the local environment of the As and Ga atoms was investigated using extended x-ray absorption fine structure (EXAFS). The EXAFS analysis shows a high concentration of dangling bonds compared to the crystalline binary endpoint compounds of the alloy system. The disorder parameter was larger for amorphous films compared to crystalline references, but comparable with other amorphous semiconductors. By examining the Ga local environment, the dangling bond density and disorder associated with As-related and N-related bonds could be decoupled. The N-related bonds had a lower dangling bond density and lower disorder.

36 MATERIALS SCIENCE↗

A platform for x-ray absorption fine structure study of dynamically compressed materials above 1 Mbar [A platform for XAFS study of dynamically compressed materials above 1 Mbar]

Here, a platform consisting of a multi-shock drive and an implosion backlighter has been developed for x-ray absorption fine structure (XAFS) measurements on materials compressed to multi-Mbar pressures. The experimental setup, target design, and backlighter characteristics are presented. Extended XAFS (EXAFS) measurements for various materials have been demonstrated. A quintuple-crystal design is described to enhance the efficiency of the x-ray spectrometer, enabling observation of very weak EXAFS signals in a single shot.

47 OTHER INSTRUMENTATION↗

Enhanced Jahn-Teller response induced by low-dose 10 MeV I{sup +} irradiation of La{sub 0.7}Ca{sub 0.3}MnO{sub 3−δ} films

The structural response of pulsed laser deposited La{sub 0.7}Ca{sub 0.3}Mn0{sub 3−δ} films to low-level 10 MeV I{sup +} irradiation is correlated with magnetic and electronic properties. A series of annealed pulsed laser deposited films were subjected to ion irradiation at doses of 0.5–2.0 × 10{sup 13} 10 MeV iodine ions/cm{sup 2}. X-ray diffraction measurements show no measurable increase in the full width at half maximum values of major reflections before and after irradiation. Extended x-ray absorption fine structure analyses (EXAFS), employing both a model independent fitting using expanded cumulants as well as a nonlinear least squares multiple scattering model based on FEFF generated theoretical EXAFS data, were employed to measure local properties relative to the Mn ions. Increasing irradiation doses lead to an unambiguous evolution of MnO{sub 6} octahedra from highly symmetric (i.e., undistorted) to a clear bimodal structure in which the MnO{sub 6} octahedra are measured to undergo a c-axis stretching bearing resemblance to a Jahn-Teller distortion. Concomitantly, the metal to insulator transition temperature decreases more than 270 K and the magnetoresistance increases from 10{sup 2}% to 10{sup 6}%.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Unraveling halide hydration: A high dilution approach

The hydration properties of halide aqua ions have been investigated combining classical Molecular Dynamics (MD) with Extended X-ray Absorption Fine Structure (EXAFS) spectroscopy. Three halide-water interaction potentials recently developed [M. M. Reif and P. H. Hünenberger, J. Chem. Phys. 134, 144104 (2011)], along with three plausible choices for the value of the absolute hydration free energy of the proton (ΔG{sub hyd}{sup ⊖}[H{sup +}]), have been checked for their capability to properly describe the structural properties of halide aqueous solutions, by comparing the MD structural results with EXAFS experimental data. A very good agreement between theory and experiment has been obtained with one parameter set, namely L{sub E}, thus strengthening preliminary evidences for a ΔG{sub hyd}{sup ⊖}[H{sup +}] value of −1100 kJ mol{sup −1} [M. M. Reif and P. H. Hünenberger, J. Chem. Phys. 134, 144104 (2011)]. The Cl{sup −}, Br{sup −}, and I{sup −} ions have been found to form an unstructured and disordered first hydration shell in aqueous solution, with a broad distribution of instantaneous coordination numbers. Conversely, the F{sup −} ion shows more ordered and defined first solvation shell, with only two statistically relevant coordination geometries (six and sevenfold complexes). Our thorough investigation on the effect of halide ions on the microscopic structure of water highlights that the perturbation induced by the Cl{sup −}, Br{sup −}, and I{sup −} ions does not extend beyond the ion first hydration shell, and the structure of water in the F{sup −} second shell is also substantially unaffected by the ion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On the local electronic and atomic structure of Ce 1-x Pr x O 2-δ epitaxial films on Si

The local electronic and atomic structure of (111)-oriented, single crystalline mixed Ce 1-x Pr x O 2-δ (x = 0, 0.1 and 0.6) epitaxial thin films on silicon substrates have been investigated in view of engineering redox properties of complex oxide films. Non-destructive X-ray absorption near edge structure reveals that Pr shows only +3 valence and Ce shows only nominal +4 valence in mixed oxides. Extended x-ray absorption fine structure (EXAFS) studies were performed at K edges of Ce and Pr using a specially designed monochromator system for high energy measurements. They demonstrate that the fluorite lattice of ceria (CeO₂) is almost not perturbed for x = 0.1 sample, while higher Pr concentration (x = 0.6) not only generates a higher disorder level (thus more disordered oxygen) but also causes a significant reduction of Ce–O interatomic distances. The valence states of the cations were also examined by techniques operating in highly reducing environments: scanning transmission electron microscopy-electron energy loss spectroscopy and X-ray photoemission spectroscopy; in these reducing environments, evidence for the presence of Ce³⁺ was clearly found for the higher Pr concentration. Thus, the introduction of Pr³⁺ into CeO₂ strongly enhances the oxygen exchange properties of CeO₂. This improved oxygen mobility properties of CeO₂ are attributed to the lattice disorder induced by Pr mixing in the CeO₂ fluorite lattice, as demonstrated by EXAFS measurements. Thus, a comprehensive picture of the modifications of the atomic and electronic structure of Ce 1-x Pr x O 2-δ epitaxial films and their relation is obtained.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The electronic structure of homogeneous ferromagnetic (Ga, Mn)N epitaxial films

X-ray Absorption Fine Structure (XAFS) techniques, namely, X-ray Near Edge Structure (XANES), Extended XAFS (EXAFS), and Anomalous X-ray Diffraction (AXRD) were used to investigate the local atomic and electronic structure of (Ga, Mn)N magnetic layers with Mn concentrations of up to 10% grown by Molecular Beam Epitaxy. The XANES and AXRD analysis prove the Mn incorporation on substitutional GaN lattice sites. EXAFS results indicate the good quality of the structure under examination, although 0.5 nitride atom vacancies were found. The Wien2k code was applied to interpret the XANES spectra quantitatively, i.e., to determine the electronic structure of the Mn atoms. It was shown that accounting for the core-hole effect is necessary to reconstruct effectively the XANES spectra. Conducted charge density analysis based on DFT calculations identified the valency of Mn atom to be of 2.4+.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of NbC thin films for soft X-ray multilayer applications

Compound materials are being used in soft x-ray and Extreme ultraviolet (EUV) optics applications. Structural properties of compound materials changes drastically when ultrathin films are formed from bulk material. Structural properties need to be investigated to determine the suitability of compound materials in soft x-ray multilayer applications. In the present study Niobium carbide (NbC) thin films were deposited using ion beam sputtering of an NbC target on Si (100) substrate. Thickness roughness and film mass density was determined from the X-ray reflectivity (XRR) data. XRR data revealed that the film mass density was increasing with increase in film thickness. For 500Ǻ thick film, mass density of 6.85 g/cm{sup 3}, close to bulk density was found. Rms roughness for all the films was less than 10Å. Local structure of NbC thin films was determined from EXAFS measurements. The EXAFS data showed an increase in Nb-C and Nb-(C)-Nb peak ratio approaches towards bulk NbC with increasing thickness of NbC. From the present study, NbC thin films were found suitable for actual use in soft x-ray multilayer applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Application of x-ray absorption fine structure (XAFS) to local-order analysis in Fe-Cr maghemite-like materials

The maghemite-like oxide system γ-Fe{sub 2-x}Cr{sub x}O{sub 3} (x=0.75, 1 and 1.25) was studied by X-ray absorption fine structure (XAFS) and by synchrotron radiation X-ray diffraction (XRD). Measurements were performed at the Stanford Synchrotron Radiation Lightsource at room temperature, at beamlines 2-1, 2-3 and 4-3. High-resolution XRD patterns were processed by means of the Rietveld method. In cases of atoms being neighbors in the Periodic Table, the order/disorder degree of the considered solutions is indiscernible by “normal” (absence of “anomalous scattering”) diffraction experiments. Thus, maghemite-like materials were investigated by XAFS in both Fe and Cr K-edges to clarify, via short-range structure characterization, the local ordering of the investigated system. Athena and Artemis graphic user interfaces for IFEFFIT and FEFF8.4 codes were employed for XAFS spectra interpretation. Pre-edge decomposition and theoretical modeling of X-ray absorption near edge structure (XANES) transitions were performed. By analysis of the Cr K-edge XANES, it has been confirmed that Cr is located in an octahedral environment. Fitting of the extended X-ray absorption fine structure (EXAFS) spectra was performed under the consideration that the central atom of Fe is allowed to occupy octa- and tetrahedral positions, while Cr occupies only octahedral ones. Coordination number of neighboring atoms, interatomic distances and their quadratic deviation average were determined for x=1, by fitting simultaneously the EXAFS spectra of both Fe and Cr K-edges. The results of fitting the experimental spectra with theoretical standards showed that the cation vacancies tend to follow a regular pattern within the structure of the iron-chromium maghemite (FeCrO{sub 3})

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

X-ray absorption spectroscopy of Mn doped ZnO thin films prepared by rf sputtering technique

A set of r.f. sputter deposited ZnO thin films prepared with different Mn doping concentrations have been characterised by Extended X-ray Absorption Fine Structure (EXAFS) and X-ray Absorption Near Edge Spectroscopy (XANES) measurements at Zn, Mn and O K edges and at Mn L{sub 2,3} edges apart from long range structural characterisation by Grazing Incident X-ray Diffraction (GIXRD) technique. Magnetic measurements show room temperature ferromagnetism in samples with lower Mn doping which is however, gets destroyed at higher Mn doping concentration. The results of the magnetic measurements have been explained using the local structure information obtained from EXAFS and XANES measurements.

36 MATERIALS SCIENCE↗

[Cu(aq)] 2+ is structurally plastic and the axially elongated octahedron goes missing

High resolution (k = 18 Å –1 or k = 17 Å –1 ) copper K-edge EXAFS and MXAN (Minuit X-ray Absorption Near Edge) analyses have been used to investigate the structure of dissolved [Cu(aq)] 2+ in 1,3-propanediol (1,3-P) or 1,5-pentanediol (1,5-P) aqueous frozen glasses. EXAFS analysis invariably found a single axially asymmetric 6-coordinate (CN6) site, with 4×O eq = 1.97 Å, O ax1 = 2.22 Å, and O ax2 = 2.34 Å, plus a second-shell of 4×O water = 3.6 Å. However, MXAN analysis revealed that [Cu(aq)] 2+ occupies both square pyramidal (CN5) and axially asymmetric CN6 structures. The square pyramid included 4×H 2 O = 1.95 Å and 1×H 2 O = 2.23 Å. The CN6 sites included either a capped, near perfect, square pyramid with 5×H 2 O = 1.94 ± 0.04 Å and H 2 O ax = 2.22 Å (in 1,3-P) or a split axial configuration with 4×H 2 O = 1.94, H 2 O ax1 = 2.14 Å, and H 2 O ax2 = 2.28 Å (in 1,5-P). The CN6 sites also included an 8-H 2 O second-shell near 3.7 Å, which was undetectable about the strictly pyramidal sites. Equatorial angles averaging 94° ± 5° indicated significant departures from tetragonal planarity. MXAN assessment of the solution structure of [Cu(aq)] 2+ in 1,5-P prior to freezing revealed the same structures as previously found in aqueous 1M HClO 4 , which have become axially compressed in the frozen glasses. [Cu(aq)] 2+ in liquid and frozen solutions is dominated by a 5-coordinate square pyramid, but with split axial CN6 appearing in the frozen glasses. Among these phases, the Cu–O axial distances vary across 1 Å, and the equatorial angles depart significantly from the square plane. Although all these structures remove the d x 2 –y 2 , d z 2 degeneracy, no structure can be described as a Jahn-Teller (JT) axially elongated octahedron. The JT-octahedral description for dissolved [Cu(aq)] 2+ should thus be abandoned in favor of square pyramidal [Cu(H 2 O) 5 ] 2+ . The revised ligand environments have bearing on questions of the Cu(i)/Cu(ii) self-exchange rate and on the mechanism for ligand exchange with bulk water. In conclusion, the plasticity of dissolved Cu(ii) complex ions falsifies the foundational assumption of the rack-induced bonding theory of blue copper proteins and obviates any need for a thermodynamically implausible protein constraint.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Developing a high-flux, high-energy continuum backlighter for extended x-ray absorption fine structure measurements at the National Ignition Facility

Extended X-ray absorption fine structure (EXAFS) spectroscopy is a powerful tool for in situ characterization of matter in the high energy density regime. An EXAFS platform is currently being developed on the National Ignition Facility. Development of a suitable X-ray backlighter involves minimizing the temporal duration and source size while maximizing spectral smoothness and brightness. One approach involves imploding a spherical shell, which generates a high-flux X-ray flash at stagnation. Furthermore we present results from a series of experiments comparing the X-ray source properties produced by imploded empty and Ar-filled capsules.

47 OTHER INSTRUMENTATION↗

Foil backlighter development at the OMEGA laser facility for extended x-ray absorption fine structure experiments

Extended x-ray absorption fine structure (EXAFS) measurements require a bright and continuous x-ray source and a detection system with high spectral resolution to capture the modulations of the absorption coefficient above the material absorption edge. When performing EXAFS measurements under laser-driven dynamic compression, it is hence critical to optimize the backlighter x-ray emission. In this study, a series of experiments has been conducted at the OMEGA laser facility to characterize titanium (Z = 22), iron (Z = 26), germanium (Z = 32), molybdenum (Z = 42), silver (Z = 47), and gold (Z = 79) foil backlighters irradiated with 3 kJ–12 kJ of laser energy. The spectra have been recorded using a dual crystal spectrometer (DCS), a two-channel transmission spectrometer covering 11 keV–45 keV and 19 keV–90 keV energy bands. The DCS has been calibrated so that the spectral intensities can be compared between different campaigns.

47 OTHER INSTRUMENTATION↗

A new class of variable-radii diffraction optics for high-resolution x-ray spectroscopy at the National Ignition Facility (invited)

A new class of crystal shapes has been developed for x-ray spectroscopy of point-like or small (a few mm) emission sources. These optics allow for dramatic improvement in both achievable energy resolution and total throughput of the spectrometer as compared with traditional designs. This class of crystal shapes, collectively referred to as the Variable-Radii Spiral (VR-Spiral), utilize crystal shapes in which both the major and minor radii are variable. A crystal using this novel VR-Spiral shape has now been fabricated for high-resolution Extended X-ray Absorption Fine Structure (EXAFS) experiments targeting the Pb-L 3 (13.0 keV) absorption edge at the National Ignition Facility. The performance of this crystal has been characterized in the laboratory using a microfocus x-ray source, showing that high-resolution high-throughput EXAFS spectra can be acquired using this geometry. Importantly, these successful tests show that the complex three-dimensional crystal shape is manufacturable with the required precision needed to realize the expected performance of better than 5 eV energy resolution while using a 30 mm high crystal. An improved generalized mathematical form for VR-Spiral shapes is also presented allowing improved optimization as compared to the first sinusoidal-spiral based design. Finally, this new formulation allows VR-Spiral spectrometers to be designed at any magnification with optimized energy resolution at all energies within the spectrometer bandwidth.

47 OTHER INSTRUMENTATION↗