Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EOR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Combining Space Geodesy, Seismology, and Geochemistry for Monitoring Verification and Accounting of CO 2 in Sequestration Sites

A series of surface geophysical and geochemical techniques are tested in order to demonstrate and validate low cost approaches for Monitoring, Verification and Accounting (MVA) of the integrity of deep reservoirs for CO 2 storage. These techniques are (i) surface deformation by GPS; ii) surface deformation by InSAR; iii) passive source seismology via broad band seismometers; and iv) soil gas monitoring with a cavity ring down spectrometer for measurement of CO 2 concentration and carbon isotope ratio. The techniques were tested at an active EOR (Enhanced Oil Recovery) site in Texas. Each approach has demonstrated utility. Assuming Carbon Capture, Utilization and Storage (CCUS) activities become operational in the future, these techniques can be used to augment more expensive down-hole techniques.

Swart, Peter K.↗

Novel CO 2 Foam Concepts and Injection Schemes for Improving CO 2 Sweep Efficiency in Sandstone and Carbonate Hydrocarbon Formations

We explored cationic, nonionic and zwitterionic surfactants to identify candidates that have the potential to satisfy all the key requirements for CO 2 foams in EOR. We have examined the formation, texture, rheology and stability of CO 2 foams as a function of the surfactant structure and formulation variables including temperature, pressure, water/CO 2 ratio, surfactant concentration, salinity and concentration of oil. Furthermore, the partitioning of surfactants between oil and water as well as CO 2 and water was examined in conjunction with adsorption measurements on limestone by the Hirasaki lab to develop strategies to optimize the transport of surfactants in reservoirs.

02 PETROLEUM↗

Initial Investigation into the Potential of CSP Industrial Process Heat for the Southwest United States

After significant interest in the 1970s, but relatively few deployments, the use of solar technologies for thermal applications, including enhanced oil recovery (EOR), desalination, and industrial process heat (IPH), is again receiving global interest. In particular, the European Union (EU) has been a leader in the use, development, deployment, and tracking of Solar Industrial Process Heat (SIPH) plants. The objective of this study is to ascertain U.S. market potential of IPH for concentrating collector technologies that have been developed and promoted through the U.S. Department of Energy's Concentrating Solar Power (CSP) Program. For this study, the solar-thermal collector technologies of interest are parabolic trough collectors (PTCs) and linear Fresnel (LF) systems.

14 SOLAR ENERGY↗

Bench Scale Development and Testing of a Novel Adsorption Process for Post-Combustion CO₂ Capture

A physical sorption process to produce dry CO₂ at high purity (>98%) and high recovery (>90%) from the flue gas taken before or after the FGD was demonstrated both in the lab and in the field (one ton per day scale). A CO₂ recovery of over 94% and a CO₂ purity of over 99% were obtained in the field tests. The process has a moisture, SOX, and Hg removal stage followed by a CO₂ adsorption stage. Evaluations based on field testing, process simulation and detailed engineering studies indicate that the process has the potential for more than 40% reduction in the capital and more than 40% reduction in parasitic power for CO₂ capture compared to MEA. The process has the potential to provide CO₂ at a cost (<$40/tonne) and quality (<1 ppm H₂O, <1 ppm SOX, <10 ppm O₂) suitable for EOR applications which can make CO₂ capture profitable even in the absence of climate legislation. The process is applicable to power plants without SOX, Hg and NOX removal equipment.

01 COAL, LIGNITE, AND PEAT↗

RVA. 3-D Visualization and Analysis Software to Support Management of Oil and Gas Resources

A free software application, RVA, has been developed as a plugin to the US DOE-funded ParaView visualization package, to provide support in the visualization and analysis of complex reservoirs being managed using multi-fluid EOR techniques. RVA, for Reservoir Visualization and Analysis, was developed as an open-source plugin to the 64 bit Windows version of ParaView 3.14. RVA was developed at the University of Illinois at Urbana-Champaign, with contributions from the Illinois State Geological Survey, Department of Computer Science and National Center for Supercomputing Applications. RVA was designed to utilize and enhance the state-of-the-art visualization capabilities within ParaView, readily allowing joint visualization of geologic framework and reservoir fluid simulation model results. Particular emphasis was placed on enabling visualization and analysis of simulation results highlighting multiple fluid phases, multiple properties for each fluid phase (including flow lines), multiple geologic models and multiple time steps. Additional advanced functionality was provided through the development of custom code to implement data mining capabilities. The built-in functionality of ParaView provides the capacity to process and visualize data sets ranging from small models on local desktop systems to extremely large models created and stored on remote supercomputers. The RVA plugin that we developed and the associated User Manual provide improved functionality through new software tools, and instruction in the use of ParaView-RVA, targeted to petroleum engineers and geologists in industry and research. The RVA web site (http://rva.cs.illinois.edu) provides an overview of functions, and the development web site (https://github.com/shaffer1/RVA) provides ready access to the source code, compiled binaries, user manual, and a suite of demonstration data sets. Key functionality has been included to support a range of reservoirs visualization and analysis needs, including: sophisticated connectivity analysis, cross sections through simulation results between selected wells, simplified volumetric calculations, global vertical exaggeration adjustments, ingestion of UTChem simulation results, ingestion of Isatis geostatistical framework models, interrogation of joint geologic and reservoir modeling results, joint visualization and analysis of well history files, location-targeted visualization, advanced correlation analysis, visualization of flow paths, and creation of static images and animations highlighting targeted reservoir features.

97 MATHEMATICS AND COMPUTING↗

Final report of “A Detailed Study of the Physical Mechanisms Controlling CO2-Brine Capillary Trapping in the Subsurface” (University of Arizona, DE-SC0006696)

Carbon capture and storage (CCS) of carbon dioxide emissions generated by production or combustion of fossil fuels is a technologically viable means to reduce the build-up of CO2 in the atmosphere and oceans. Using advantages of scale and location, CCS is particularly suitable for large point sources near ubiquitous deep saline aquifers, depleted gas reservoirs, or at production reservoirs for enhanced oil recovery (EOR). In the BES-funded research project, Oregon State University (OSU) carried out capillary trapping experiments with proxy fluids that mimic the properties of the scCO2/brine system under ambient temperatures and pressures, and successfully developed a unique and novel x-ray compatible, high-pressure, elevated temperature setup to study the scCO2/brine system under challenging reservoir conditions. Both methodologies were applied to a variety of porous media, including synthetic (glass bead) and geologic (Bentheimer sandstone) materials. The University of Arizona (UA) developed pore-scale lattice Boltzmann (LB) models which are able to handle the experimental conditions for proxy fluids, as well as the scCO2/brine system, that are capable of simulating permeability in volumes of tens of millions of fluid elements. We reached the following summary findings (main institute indicated): 1. (OSU/UA) To understand capillary trapping in a multiphase fluid-porous medium system, the system must be analyzed from a pore-scale force balance perspective; trapping can be enhanced by manipulating wetting and nonwetting phase fluid properties. 2. (OSU) Pore-scale fluid connectivity and topology has a clear and direct effect on nonwetting phase capillary trapping efficiency. 3. (OSU) Rock type and flow regime also have a pronounced effects on capillary trapping. 4. (OSU/UA) There is a predictable relationship between NWP connectivity and NWP saturation, which allows for development of injection strategies that optimize trapping. The commonly used Land model (Land, 1968) does not predict amount of trapped NWP accurately. 5. (UA) There are ambiguities regarding the segmentation of large-volume gray-scale CT data into pore-volumes suitable for pore-scale modeling. Simulated permeabilities vary by three orders of magnitude and do not resemble observed values very well. Small-volume synchrotron-based CT data (such as produced by OSU) does not suffer significantly from segmentation ambiguities. 6. (UA) A standard properly parameterized Shan-Chen model LB model is useful for simulating porous media with proxy fluids as well as the scCO2/brine system and produces results that are consistent with tomographic observations. 7. (UA) A LB model with fluid-interactions defined by a (modified) Peng-Robinson Equation of State is able to handle the scCO2/brine system with variable solid phase wettability. This model is numerically stable at temperatures between 0 and 250 °C and pressures between 3 and 50 MPa, and produces appropriate densities above the critical point of CO2 and exhibits three-phase separation below. Based on above findings OSU and UA have proposed continued experimentation and pore-scale modeling of the scCO2/brine system. The reported research has extensively covered capillary trapping using proxy fluids, but due to limited beam-time availability we were unable to apply our high-pressure CO2 setup to sufficient variation in fluid properties, and initial scCO2 connectivity. New data will also allow us to test, calibrate and apply our LB models to reservoir conditions beyond those that are currently feasible experimentally. Such experiments and simulations will also allow us to provide information how suitable proxy fluids are for the scCO2/brine system. We believe it would be worthwhile to pursue the following new research questions: 1. What are the fundamental differences in the physics underlying capillary trapping at ambient vs. supercritical conditions? 2. Do newly developed pore-scale trapping interactions and relationships translate to continuum scales? A motivation for these questions was elaborated in “Capillary Trapping of Super-Critical CO2: Linking Pore and Continuum Scales to Verify new Relationships” that was submitted to DOE-BES in 2015.

20 FOSSIL-FUELED POWER PLANTS↗

Methods for Finding Legacy Wells in Large Areas

United States. When abandoned, many wells were not adequately sealed and now provide a potential conduit for the vertical movement of liquids and gases. Today, groundwater aquifers can be contaminated by surface pollutants flowing down wells or by deep, saline water diffusing upwards. Likewise, natural gas, carbon dioxide (CO2), or radon can travel upwards via these wells to endanger structures or human health on the surface. Recently, the need to find and plug wells has become critical with the advent of carbon dioxide injection into geologic formations for enhanced oil recovery (EOR) or carbon storage. The potential for natural gas or brine leakage through existing wells has also been raised as a concern in regions where shale resources are hydraulically fractured for hydrocarbon recovery. In this study, the National Energy Technology Laboratory (NETL) updated existing, effective well finding techniques to be able to survey large areas quickly using helicopter or ground-vehicle-mounted magnetometers, combined with mobile methane detection. For this study, magnetic data were collected using airborne and ground vehicles equipped with two boom-mounted magnetometers, or on foot using a hand-held magnetometer with a single sensor. Data processing techniques were employed to accentuate well-casing-type magnetic signatures. To locate wells with no magnetic signature (wells where the steel well casing had been removed), the team monitored for anomalous concentrations of methane, which could indicate migration of volatile compounds from deeper sedimentary strata along a well or fracture pathway. Methane measurements were obtained using the ALPIS DIfferential Absorption Lidar (DIAL) sensor for helicopter surveys and the Apogee leak detection system (LDS) for ground surveys. These methods were evaluated at a 100-year-old oilfield in Wyoming, where a helicopter magnetic survey accurately located 93% of visible wells. In addition, 20% of the wells found by the survey were previously unknown or inaccurately located. This study found helicopter magnetic surveys to be an accurate, cost- and time-effective means to locate steel-cased wells in large areas, and is a first step in evaluating whether well detection techniques can be applied effectively for well location screening across broad geographic areas.

54 ENVIRONMENTAL SCIENCES↗

Methods for Finding Legacy Wells in Large Areas

More than 10 million wells have been drilled during 150 years of oil and gas production in the United States. When abandoned, many wells were not adequately sealed and now provide a potential conduit for the vertical movement of liquids and gases. Today, groundwater aquifers can be contaminated by surface pollutants flowing down wells or by deep, saline water diffusing upwards. Likewise, natural gas, carbon dioxide (CO 2 ), or radon can travel upwards via these wells to endanger structures or human health on the surface. Recently, the need to find and plug wells has become critical with the advent of carbon dioxide injection into geologic formations for enhanced oil recovery (EOR) or carbon storage. The potential for natural gas or brine leakage through existing wells has also been raised as a concern in regions where shale resources are hydraulically fractured for hydrocarbon recovery. In this study, the National Energy Technology Laboratory (NETL) updated existing, effective well finding techniques to be able to survey large areas quickly using helicopter or ground-vehicle-mounted magnetometers, combined with mobile methane detection. For this study, magnetic data were collected using airborne and ground vehicles equipped with two boom-mounted magnetometers, or on foot using a hand-held magnetometer with a single sensor. Data processing techniques were employed to accentuate well-casing-type magnetic signatures. To locate wells with no magnetic signature (wells where the steel well casing had been removed), the team monitored for anomalous concentrations of methane, which could indicate migration of volatile compounds from deeper sedimentary strata along a well or fracture pathway. Methane measurements were obtained using the ALPIS DIfferential Absorption Lidar (DIAL) sensor for helicopter surveys and the Apogee leak detection system (LDS) for ground surveys. These methods were evaluated at a 100-year-old oilfield in Wyoming, where a helicopter magnetic survey accurately located 93% of visible wells. In addition, 20% of the wells found by the survey were previously unknown or inaccurately located. This study found helicopter magnetic surveys to be an accurate, cost- and time-effective means to locate steel-cased wells in large areas, and is a first step in evaluating whether well detection techniques can be applied effectively for well location screening across broad geographic areas.

03 NATURAL GAS↗

Identification of Residual Oil Zones in the Williston and Powder River Basins

The goal of this project by the Energy & Environmental Research Center was to systematically assess the petroleum systems of the Williston and Powder River Basins (PRB) for prospective residual oil zones (ROZs) through a geologic process modeling approach. This approach models the evolution of a sedimentary basin to predict if, when, and where reservoirs were charged with hydrocarbons. Suspected ROZs identified by this approach were evaluated for their potential oil recovery using carbon dioxide (CO 2 ) and for associated CO 2 storage. ROZs are naturally waterflooded portions of oil reservoirs with oil saturations between 25% and 40% but are at irreducible oil saturation levels with respect to water, rendering the reservoirs uneconomic using conventional recovery methods. However, using CO 2 enhanced oil recovery (EOR), substantial amounts of oil can be recovered from ROZs while simultaneously storing CO 2 . ROZs were originally identified and defined in the Permian Basin of West Texas but have since been identified or speculated in several geologic basins, including the Williston Basin and PRB.

54 ENVIRONMENTAL SCIENCES↗

Energy & Environmental Research Center (EERC)–U.S. Department of Energy (DOE) Joint Program on Research and Development for Fossil Energy-Related Resources

The EERC teamed with the DOE National Energy Technology Laboratory to conduct complementary research and development under the Joint Program on Research and Development for Fossil Energy-Related Resources (Cooperative Agreement No. DE-FC26-08NT43291). This 10-year program merged two previous 10-year agreements—DE-FC26-98FT40320 and DE-FC26-98FT40321—into a single follow-on agreement. The Fossil Energy cooperative agreement between DOE and the EERC was initiated in 1983 when the EERC was defederalized. This dynamic 35-year partnership has evolved to further research in areas that address DOE Office of Fossil Energy program goals while serving the missions and exploiting the strengths of both organizations through this agreement and a new 5-year Fossil Energy-Related Resources cooperative agreement established in 2015. As the 10-year program has ended, the purpose of this report is to summarize the activity and significant outcomes that were accomplished by the EERC. This program is an excellent model for research, development, demonstration, and commercialization partnerships between government, industry, and the applied science and engineering communities to bring cutting-edge science closer to commercial application. The overarching goal was to support DOE Fossil Energy goals by advancing the scientific knowledge and technical development essential to ensuring future sustainable supplies of affordable energy and clean water, protecting and restoring the environment, and reducing dependence on foreign energy sources, thereby increasing U.S. energy security. The strategic objective was to advance continued use of domestic fossil fuels as a mainstay of U.S. energy production by making fossil energy systems nonpolluting and more efficient, capturing and sequestering greenhouse gases, and integrating the use of fossil and renewable energy sources into the energy mix. The research achievements from this partnership have exceeded the goals and objectives by contributing substantially to the development of science-based energy and environmental policy, educational foundations for science and technology, and commercialization and international marketing of energy technologies. The program comprised 75 individual projects, which included basic/applied fossil energy research projects involving no cost share and development, demonstration, and commercialization projects (many derived from applied research projects) that included nonfederal cost share of approximately 40% (the contractually required minimum level of cumulative nonfederal cost share was 29%). In all, 32,798,698 of federal funding was leveraged with industry cash and in-kind cost share of 21,697,129 from 80 nonfederal partners for a total of 54,495,827 of funded research that 1) advanced the development of unconventional tight oil resources in the Bakken Formation; 2) demonstrated the application of CO 2 Storage and EOR in tight oil formations; 3) developed advanced carbon capture technology; 4) addressed key application and infrastructure concerns for commercial deployment of CO 2 ; 5) demonstrated innovative, integrated water management strategies for energy development projects; 6) developed novel pollution control technologies for mercury and hazardous air pollutants; and 7) performed world-class outreach and dissemination of research results to industry partners and other stakeholders. These outcomes speak to the valuable return on the substantial investment in this program.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

California CO 2 Storage Assurance Facility Enterprise (C2SAFE): Final Technical Report

The California CO 2 Storage Assurance Facility Enterprise (C2SAFE) project conducted a preliminary study into the feasibility of a commercial-scale carbon dioxide (CO 2 ) storage complex located in California’s Southern San Joaquin Valley (SSJV). The work represents the first phase of a multi-phased development approach outlined by the United States Department of Energy’s (DOE’s) Carbon Storage Assurance and Facility Enterprise (CarbonSAFE) program meant to develop carbon storage sites capable of permanently storing 50 million metric tonnes of CO 2 , or greater, injected over a typical facility life of 20 to 30 years. This report represents the culmination of work performed under C2SAFE and outlines a phased implementation plan for large-scale, industrial carbon capture and permanent storage in California’s SSJV. The report is meant to be a standalone document and as such provides high-level summaries of all tasks of the project, but is also meant to complement the other three topical reports issued by the project – reports referenced herein. The study considered multiple scenarios including an east-side storage facility, a west-side storage facility, and potential multi-site storage facilities. The east-side storage facility is to be located at Clean Energy Systems, Inc.’s Kimberlina Power Plant, or nearby, and the west-side facility will be located at the California Resources Corporation’s (CRC’s) Elk Hills oil field. The majority of carbon emissions are planned to be captured from existing sources and transported to the selected and verified storage site(s). Capture from the single closest source to the eastern storage facility and the sources within the Elk Hills field would meet the CarbonSAFE storage goal of 50 million tonnes. The study has shown there is sufficient storage capacity to meet this requirement and more; thus, capture from any of the numerous additional large nearby sources would substantially leverage the CarbonSAFE investment. A comparison of preliminary CO 2 capture, transportation, and storage costs to economic value and incentives in the state shows current market conditions make it economically feasible to develop large-scale industrial storage sites in California’s SSJV. The business case for Carbon Capture and Storage (CCS) in California’s SSJV appears economically viable today for large CO 2 point sources involved in the production of transportation fuels, such as oilfield cogeneration units and steam boilers. The overall levelized CCS cost is estimated at roughly 125 per tonne of CO 2 , which includes CO 2 amine-solvent post-combustion capture, transportation, and storage. The levelized CO 2 capture cost is based on today’s technology, with no future cost reduction factored in for technology improvement. The sum of the value of incentives and revenue from California Low Carbon Fuel Standard (LCFS) credits (discounted roughly 20% from their current transaction value), sale of California cap-and-trade emission allowances, and Section 45Q tax credits—either for saline storage or the Enhanced Oil Recovery (EOR) credit plus CO 2 sales revenue—is about 165/tonne-CO 2 . The economic viability of CCS for Natural Gas Combined Cycle (NGCC) power plants in the SSJV is more site-specific. A plant providing power solely to the electric grid, if it added CCS, should be eligible for Section 45Q tax credits and could sell its excess cap-and-trade emission allowances, but it would not generate LCFS credits. Using the cost and incentive values detailed in this report, it would not be economical for such a plant to add CCS today, barring other considerations. An NGCC plant within an oilfield (e.g., CRC Elk Hills and NRG Sunrise) that provides power to the oilfield as well as to the grid should receive “partial credit” in terms of generating LCFS credits if it added CCS (pro-rated for the fraction of power going to the oilfield). Such a plant should also be eligible for Section 45Q tax credits and garner revenue from selling its excess cap-and-trade emission allowances. Using the cost and incentive values described in this report, the economic viability of adding CCS today would depend on the relative fractions of electricity supplied to the oilfield and the grid. As the value of cap-and-trade emission allowances grows over time (either by market forces or the escalating floor price), the relative fraction of power needing to remain in the oilfield to achieve “breakeven” would diminish. At some point, even plants providing all their power to the grid would be candidates for economical CCS application. The C2SAFE team has proposed to expand upon the knowledge gained during this study by conducting a detailed feasibility assessment under a follow-on phase of the program, Phase II – Feasibility. This would include detailed data collection at the two sites, analysis, reporting, stakeholder outreach, and risk mitigation activities to support the development of a commercial carbon storage complex in the SSJV.

58 GEOSCIENCES↗

Report on Developing a US-China Joint Project on CO2-Based Fracturing Techniques

There are several types of hydraulic fracturing methods that have been investigated in the past decades that use little or no water. The criteria for selecting an optimal hydraulic fracturing fluids are many, and no single fluid can meet all the desired characteristics. Developing a set of technologies by using different fracturing fluids can better meet individual geologic, economic, and environmental needs. CO2 as an alternative of water for hydraulic fracturing has its unique place among all other fracturing fluids, and can meet both economic and environmental objectives under certain circumstances. There are three main categories of CO2-based fracturing fluids, simple liquid CO2 (LCO2), directly thickened LCO2, and CO2-foams/emulsions. Although LCO2 has many advantages, critical disadvantages arise due to its high operating pressure, low viscosity, poor proppant-carrying capacity, and generation of shallower fracture networks. To date, techniques for direct thickening of LCO2 to overcome these limitations have proven ineffective. To increase the apparent viscosity of CO2, we propose to further develop CO2-foam (and emulsion) fracturing techniques. While CO2-foams have long been used in EOR, the required properties for hydraulic fracturing are different, and relatively few peer-reviewed publications and field test reports are available regarding their applications in fracturing, and the surfactants and additives used are often proprietary This report describes a brief state-of-the-art analysis of CO2-based hydraulic fracturing methods and then discusses a joint plan for a long-term R&D collaboration to advance the most promising CO2-based hydraulic fracturing techniques as part of the U.S.-China Clean Energy Research Center, Water Energy Technology (CERC-WET). The objective of this U.S.-China joint research project is to design and laboratory test a CO2-foam fracturing fluid system, and then conduct pilot field-tests on them in China’s Jilin Oilfield. This joint research project will benefit both U.S. and China for advancing their shared goal of developing better technologies for CO2-based fracturing. The Chinese CERC-WET has two teams joining the project, one from RIPED, responsible for aboveground infrastructure design and construction. Another team from the Jilin Oilfield will be responsible for the field test design and conducting the test. The U.S.CERC-WET team at LBNL will be responsible for providing the CO2-foam formulations and their rheology parameters to be tested in the field (a challenging task and a key to success); participating in the equipment design and field test design; assisting in analyzing field data; and reporting to U.S. DOE and CERC-WET.

58 GEOSCIENCES↗

Brine water storage tank

Methane losses from a brine water storage tank at an enhanced oil recovery (EOR) extraction site. To access the model referenced in the report, please visit https://www.netl.doe.gov/energy-analysis/details?id=E012BB0F-9C56-4552-B696-6CB8C8E7C47B

02 PETROLEUM↗

Crude oil storage tank

VOC losses from a crude oil storage tank at an enhanced oil recovery (EOR) extraction site. To access the model referenced in the report, please visit https://www.netl.doe.gov/energy-analysis/details?id=17C54AEE-E17D-47FA-9264-7EB909DD8EAF

02 PETROLEUM↗

Kemper County IGCC (Final Project Report)

The Kemper County IGCC plant was a lignite-fueled 2-on-1 Integrated Gasification Combined-Cycle (IGCC) facility that demonstrated the air-blown Transport Integrated Gasification (TRIG™) technology jointly developed by Southern Company, KBR, Inc. (KBR), and the U.S. Department of Energy (DOE) at the Power Systems Development Facility (PSDF) in Wilsonville, Ala. The plant is owned by Mississippi Power Company (MPC) and has a calculated nameplate capacity of 830 MW with a peak net output of 582 MW. As a result of advanced emissions control equipment, the facility is designed to produce marketable products of ammonia (NH 3 ), sulfuric acid (H 2 SO 4 ), and carbon dioxide (CO 2 ). The plant is designed to capture 65 percent of the carbon producing a CO 2 stream for use in enhanced oil recovery (EOR), making the plant carbon emissions comparable to those of a natural gas-fired combined cycle power plant. This report describes operation activities post commissioning of the plant and through suspension of the facility. This includes first coal feed testing and syngas production for combustion within the combustion turbine up to the final day of operation.

20 FOSSIL-FUELED POWER PLANTS↗

Underground Natural Gas Storage – Analog Studies to Geologic Storage of CO 2

This study focuses on underground natural gas storage operations and CO 2 geologic storage in saline-bearing formations; both individually and in relation to each other. This study is the first of three that evaluate analog industries of CO 2 storage (second focuses on deep well waste disposal using U.S. EPA UIC Class I wells and third on CO 2 EOR). Several pieces of information can be found throughout the study including overview of underground natural gas storage history and side-by-side comparisons of major synergistic features between underground natural gas storage and CO 2 storage in saline-bearing formations. Best practices and lessons learned from underground natural gas storage operations can provide perspective from which future CO 2 storage R&amp;D pursuits and field projects can benefit. A summary document providing a high-level overview and key takeaways of this study is available on NETL’s website under the Collection Name: NETL’s Analog Studies to Geologic Storage of CO 2 .

03 NATURAL GAS↗

UIC Class I Injection Wells – Analog Studies to Geologic Storage of CO 2

This study focuses on deep well waste disposal operations (non-hazardous and hazardous) using U.S. EPA UIC Class I wells and CO 2 geologic storage in saline-bearing formations; both individually and in relation to each other. This study is the second of three that evaluate analog industries of CO 2 storage (first focuses on underground natural gas storage and third on CO 2 EOR). Several pieces of information can be found throughout the study including overview of deep well waste disposal history and side-by-side comparisons of major synergistic features between deep well waste disposal and CO 2 storage in saline-bearing formations. Best practices and lessons learned from deep well waste disposal operations can provide perspective from which future CO 2 storage R&D pursuits and field projects can benefit. A summary document providing a high-level overview and key takeaways of this study is available on NETL’s website under the Collection Name:NETL’s Analog Studies to Geologic Storage of CO 2 .

03 NATURAL GAS↗

Quality Guidelines for Energy System Studies: CO 2 Impurity Design Parameters

This section of the Quality Guidelines for Energy System Studies (QGESS) provides recommended impurity limits for carbon dioxide (CO 2 ) stream components for use in conceptual studies of CO 2 carbon capture, utilization, and storage systems. These limits were developed from information consolidated from numerous studies and are presented by component and application. Impurity levels are provided for carbon steel pipelines, sequestration through enhanced oil recovery (EOR), saline aquifer sequestration (SAS), and co-sequestration of CO 2 and hydrogen sulfide (H2S) in saline reservoirs. This QGESS is intended as a guideline only for conceptual studies under a generic scenario and should not be used for actual projects, which are likely to have requirements that differ from the generic scenario assumed herein.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗