Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dehydrogenation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Thermal Chemistry of Nickel Diketonate Atomic Layer Deposition (ALD) Precursors on Tantalum and Silicon Oxide Surfaces

The mechanism of the thermal conversion of both bis(2,2,6,6-tetramethyl-3,5-heptanedionato)nickel(II) (Ni(TMHD) 2 ) and the protonated ligand (TMHD-H) adsorbed on TaO x and SiO 2 /TaO x surfaces was characterized under ultrahigh vacuum (UHV) by a combination of temperature-programmed desorption (TPD) and X-ray photoelectron spectroscopy (XPS) experiments. In this work, A stepwise decomposition was observed with Ni(TMHD) 2 encompassing at least four different stages: (1) a ligand loss, to release TMHD-H; (2) a surprising ligand fractioning via the scission of an inner C–C bond within the central β-diketonate moiety to produce an aldehyde (pivaldehyde) and a ketone (pinacolone); (3) further ligand splitting following a more extensive cracking to yield an olefin (from dehydrogenation of the terminal tert-butyl group), carbon monoxide, and adsorbed methylene groups; and finally, (4) the loss of one oxygen atom from the remaining ligands to produce the corresponding enone. As these conversions take place, the Ni ion is reduced, first to a partially oxidized intermediate, as the first ligand is removed, and then to its metallic state as the remaining organic fragments migrate to the surface. A similar sequence was seen on both surfaces, but with the transitions taking place at higher temperatures on SiO 2 . The implications of these results to the surface chemistry of other ALD precursors and to the design of ALD processes are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Open Circuit Potential of a Au Catalyst during Selective Oxidation of Glycerol

It has been of great interest to understand relationships between the potential of a metal catalyst and its thermochemical catalytic activity, especially in an aqueous phase environment. In the literature, there are correlations of open circuit potential with reaction rates or surface concentrations of reaction intermediates. In this study, we measured the open circuit potential (OCP) of a Au gauze during selective oxidation of glycerol to glyceric acid and hydrogen peroxide in a basic solution, as a function of hydroxide and alcoholate concentrations. It is found that applying a potential to the Au catalyst has no influence on the reaction rate. Although a rough correlation appears to exist between OCP and reaction rate, the data are better fit to an equation which assumes that the potential of the metal (i.e. the OCP) is in equilibrium with the electrochemical potential of the solution, which is defined by the thermodynamic activities of the oxidizing and reducing species. The equation: OCP = constant + Σ ox [(RT/FZ ox )ln[Ox]] - Σ red [(RT/FZ red )ln[Red]] implicitly assumes that the Au metal functions as a probing electrode. It is further found that this equation also applies to the Au-catalyzed H 2 O 2 oxidation/decomposition reaction in a basic medium, and possibly to formic acid dehydrogenation. Here, we postulate that the apparent correlation between OCP and reaction rate is due to the fact that the reaction rate is proportional to the concentrations of the reaction products and/or reactants that define the electrochemical potential of the solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Insights into the Oxidation Mechanism of Vivianite to Metavivianite from First-Principles Calculations

Vivianite, a hydrous ferrous iron-phosphate mineral (Fe 3 (PO 4 ) 2 ·8H 2 O), readily oxidizes in contact with air yielding the less hydrous mixed-valent iron-phosphate mineral metavivianite. This topotactic transformation nominally occurs by oxidative dehydrogenation in which outgoing electrons from the iron sublattice are charge compensated by hydrolysis of structural water. However, the details of this internal charge balancing mechanism that allows the structure to remain electrostatically stable remain unknown. Here, in this study, we use density functional theory (DFT) calculations and ab initio thermodynamics (AIT) to evaluate the energetics of this process in terms of hydrogen release as a function of environmental variables such as partial pressure and temperature. The results show a thermodynamic driving force for vivianite phase transformation as oxidation progresses that is triggered by its rigid structure that has a limited accommodation for hydrogen vacancies. In contrast, metavivianite has a more flexible lattice and hydrogen bond network that stabilizes these hydrogen defects. Metavivianite is shown to be a stable intermediate for 66% residual Fe 2+ down to 33% Fe 2+ , below which other phases/structures such as santabarbarite should be more thermodynamically favorable. Our study provides a basis for experimental tests of our mechanistic findings and helps fill a basic knowledge gap about the solid-state process that defines how vivianite interacts with its surrounding environment.

Sassi, Michel [Pacific Northwest National Laborato↗
DOE OSTI2020

Controlling Hydrocarbon (De)Hydrogenation Pathways with Bifunctional PtCu Single-Atom Alloys

The conversions of surface-bound alkyl groups to alkanes and alkenes are important steps in many heterogeneously catalyzed reactions. On the one hand, while Pt is ubiquitous in industry because of its high activity toward C–H activation, many Pt-based catalysts tend to overbind reactive intermediates, which leads to deactivation by carbon deposition and coke formation. On the other hand, Cu binds intermediates more weakly than Pt, but activation barriers tend to be higher on Cu. We examine the reactivity of ethyl, the simplest alkyl group that can undergo hydrogenation and dehydrogenation via β-elimination, and show that isolated Pt atoms in Cu enable low-temperature hydrogenation of ethyl, unseen on Cu, while avoiding the decomposition pathways on pure Pt that lead to coking. Lastly, we confirm the predictions of our theoretical model and experimentally demonstrate that the selectivity of ethyl (de)hydrogenation can be controlled by changing the surface coverage of hydrogen.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Atomic-Scale View of Redox Induced Changes for Monolayer MoO x on α-TiO 2 (110) with Chemical-State Sensitivity

Supported molybdenum oxide (MoO x ) plays an important role in catalytic transformations from alcohol dehydrogenation to transesterification. During these reactions, Mo and oxygen surface species undergo structural and chemical changes. A detailed, chemical-state specific, atomic-scale structural analysis of the catalyst under redox conditions is important for improving catalytic properties. In this study, monolayer of MoO x grown on α-TiO 2 (110) by atomic-layer deposition is analyzed by X-ray standing wave (XSW) excited X-ray photoelectron spectroscopy (XPS). The chemical shifts for Mo 2p 3/2 and O 1s peaks are used to distinguish Mo 6+ from Mo 4+ and surface O from bulk O. Excitation of XPS by XSW allows pin-pointing the location of these surface species relative to the underlying substrate lattice. Finally, measured 3D composite atomic density maps for the oxidized and reduced interfaces compare well with our density functional theory models, and collectively create a unique view of the redoxdriven dynamics for this complex catalytic structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Investigating Spillover Energy as a Descriptor for Single-Atom Alloy Catalyst Design

The identification of thermodynamic descriptors of catalytic performance is essential for the rational design of heterogeneous catalysts. Here, we investigate how spillover energy, a descriptor quantifying whether intermediates are more stable at the dopant or host metal sites, can be used to design single-atom alloys (SAAs) for formic acid dehydrogenation. Further, using theoretical calculations, we identify NiCu as a SAA with favorable spillover energy and demonstrate that formate intermediates produced after the initial O–H activation are more stable at Ni sites where rate-determining C–H activation occurs. Surface science experiments demonstrated that NiCu(111) SAAs are more reactive than Cu(111) while they still follow the formate reaction pathway. However, reactor studies of silica-supported NiCu SAA nanoparticles showed only a modest improvement over Cu resulting from surface coverage effects. Overall, this study demonstrates the potential of engineering SAAs using spillover energy as a design parameter and highlights the importance of adsorbate–adsorbate interactions under steady-state operation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Mechanistic Insights into Processive Polyethylene Hydrogenolysis through In Situ NMR

Chemical polymer upcycling by processive catalysts is a promising plastic waste remediation strategy, with the capability of producing selective, high-value products from waste plastics with minimal energy input. We previously designed a novel processive catalyst with a mesoporous SiO 2 shell/Pt nanoparticle/SiO 2 core architecture (mSiO 2 /Pt/SiO 2 ) that deconstructs polyolefins within narrow pores. Here, in this paper, we elucidate the mechanism of processive polyolefin hydrogenolysis using in situ magic-angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy and coarse-grained molecular dynamics simulations. We observe that most polyethylene–Pt interactions do not lead to C–C bond cleavage but rather to the release of the polymer via a dehydrogenation–rehydrogenation cycle. The porous architecture increases the likelihood that a released polymer is later cleaved and enables the catalyst to perform multiple successive cleavages to the same polymer chain. Both experiment and simulation show that the extent of processivity is strongly correlated with the length of the pores, with longer pores leading to a higher processivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Inexpensive Hydrogen Storage: Propylene to Propane using Plasmonic Photocatalysis

Chemistry-based hydrogen storage media, such as liquid organic hydrogen carriers, offer an attractive alternative to physical hydrogen storage solutions. Here, we investigate propane as a possible hydrogen storage medium, attractive for its low cost and ease of availability. We report the ambient temperature and pressure hydrogenation of propylene using an antenna-reactor Al@TiO 2 −Pt single-atom plasmonic photocatalyst. Illumination at two distinct wavelengths, 450 and 800 nm, corresponds to high reactivity toward propane production. Theoretical insight into wavelength-dependent hot-carrier generation reveals nonequilibrium carriers with sufficient energies to activate both steps of propylene hydrogenation at either wavelength, the dissociation of H 2 and its incorporation into the propylene carbon− carbon double bond. Paired with light-driven propane dehydrogenation, this study demonstrates that photocatalytic cycling of propylene - propane for hydrogen storage and release can be performed under mild conditions.

alkyls↗
DOE OSTI2022

Enhanced Catalytic Performance of a Ce/V Oxo Cluster through Confinement in Mesoporous SBA-15

To increase catalytic efficiency, mesoporous supports have been widely applied to immobilize well-defined metal oxide clusters due to their ability to stabilize highly dispersed clusters. Here, for this study, a redox-active heterometallic Ce 12 V 6 -oxo cluster (CeV) was first presynthesized and then incorporated into mesoporous silica, SBA-15, via a straightforward impregnation method. Scanning transmission electron microscopy (STEM) and Fourier transform infrared spectroscopy (FTIR), in concert with scanning electron microscopy and energy-dispersive X-ray spectroscopy (SEM-EDS), verified the successful introduction of the CeV cluster inside the pore of SBA-15. The 51 V magic angle spinning solid-state nuclear magnetic resonance ( 51 V MAS NMR) spectroscopy and differential pair distribution function (dPDF) analysis confirmed the structural integrity of the CeV cluster inside the SBA-15. The composite was then benchmarked for liquid-phase oxidation of 2-chloroethyl ethyl sulfide (CEES) under mild conditions and gas-phase oxidative dehydrogenation (ODH) of propane under high temperatures (up to 550 °C). The catalytic reactivity results demonstrated 8- and 14-fold increase in turnover frequency (TOF) values of the composite (CeV@10SBA-2) than the bulk CeV cluster under the same conditions for CEES oxidation and ODH, respectively. These results highlight the improved reactivity of the catalytically active CeV cluster as attributed to the higher dispersion of the discrete cluster upon immobilization within the SBA-15 support.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Fluoropolymer Composites from Partially Perfluoroalkylated Waste Polyethylene

Chemically modified plastics have emerged as practical solutions to plastic waste increases. Here, the inherent novelty of decorating polymer chains with chemical functionality results in distinct properties that expand the available application space. Nevertheless, developing designer materials for specific applications beyond compatibilization or mild property enhancement is difficult due to the synergistic effects of both the polar functionality imparted and the parent materials' intrinsic properties. By incorporating perfluoro-alkyl side-chains onto the backbone of dehydrogenated waste HDPE, unique surface properties intermediate between polytetrafluoroethylene (PTFE, the model fluoropolymer) and HDPE become apparent, while the overall material mechanical and thermal properties result in more LLDPE-like materials. This is demonstrated through moderate decreases in the surface free energy of the perfluoroalkylated polyolefin surface (increase in H 2 O contact angle of ~ 6°) and increased ordering under shear when blended with PTFE nanoparticles where the crossover point occurred at higher strains. Critically, perfluoroalkylated HDPE possesses improved rheological modification properties at elevated temperatures with PTFE nanoparticles, resulting in more thermally robust and stable composite materials.

fluoropolymer↗
DOE OSTI2023

Synthesis and Characterization of Amorphous Lawsone Polymer Dots for Fluorescent Applications

In this work, a two-step hydrothermal/solvothermal process was developed to generate highly fluorescent lawsone polymer dots (LPDs) utilizing an inexpensive and abundant starting material, 2-hydroxy-1,4-napththoquinone (lawsone). This hydrothermal/solvothermal process produces LPDs that have excitation independent emission with well-defined electronic transitions. This two-step protocol provides a straightforward approach to remove unwanted small molecular fluorescence, which has plagued carbon dot systems, without the need for advanced chromatographic purification methods or steps. A series of spectroscopic, electrochemical, and theoretical experiments suggest that this process proceeds via a sequential dehydration and dehydrogenation pathway to cross-link the lawsone into a carbon dot structure. This polymerization process helps to stabilize and favor certain electronic transitions inherently present in the lawsone monomer. The generation of the LPDs results in a 2 order of magnitude increase in the emission intensity and a quantum yield of 37%. This behavior is likely the result of the cross-linked structure shielding these electronic states from deactivation caused by nonradiative processes such as vibrational coupling and excited state quenching from thermal deactivation and solvent collisions. This finding is consistent with a cross-linked enhanced emission (CEE) mechanism, as previously observed for other similar systems. The LPDs were then incorporated into a TiO2 photoanode and utilized as a photosensitizer in a dye-sensitized solar cell (DSSC) which showed an enhancement in photocurrent density over pure TiO2. We also prepared a derivative of the LPDs utilizing a diethylene triamine additive (nitrogen-doped lawsone polymer dots (N-LPDs)) using the same two-step protocol and demonstrated its potential as a fluorescence microscopy dye for imaging MDA-MB-231 cancer cells.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Critical Hydrogen Coverage Effect on the Hydrogenation of Ethylene Catalyzed by δ-MoC(001): An Ab Initio Thermodynamic and Kinetic Study

Highly selective oxidation of methane to methanol has long been challenging in catalysis. Here, we reveal key steps for the promotion by water when tuning the selectivity of a well-defined CeO 2 /Cu 2 O/Cu(111) catalyst from CO and CO 2 to methanol under a reaction environment with methane, oxygen, and water. Ambient-pressure x-ray photoelectron spectroscopy showed that water added to CH 4 and O 2 led to surface CH 3 O and accelerated methanol production. These results were consistent with density functional theory calculations and kinetic Monte Carlo simulations which showed that water preferentially dissociates over the active Ce ions at the CeO 2 -Cu 2 O/Cu(111) interface. The adsorbed OH blocked O-O bond cleavage that would dehydrogenate CH 3 O to CO and CO 2 , and it directly converted this species to methanol, while O 2 now reoxidized the reduced surface. Water adsorption also displaced the produced methanol into the gas phase.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Hydrogen Evolution on Restructured B-Rich WB: Metastable Surface States and Isolated Active Sites

Borides have been recently identified to be a class of earth-abundant and low-cost materials that are surprisingly active toward oxidative dehydrogenation and hydrogen evolution reaction (HER) catalysis. Here, we explain from first-principles calculations the HER activity of WB, an industrial material known for its superior physical properties and chemical inertness. We find that, compared to bulk termination, a major surface reconstruction takes place, leading to the off-stoichiometric B-rich surface termination that contains the active sites. The hydrogen adsorbate configurations are further investigated under various adsorbate coverages. Many competing configurations appear to be accessible in reaction conditions, and thus, a grand canonical ensemble is established to describe the catalytic system. A phase diagram of adsorbate coverages is constructed as a function of pH and the applied potential. A complex reaction network is presented based on the ensemble-averaged reaction rates, and the electrocatalytic activities are evaluated under different overpotentials. Here, the major contributors to the activity are found to be a few metastable surface states with a distinct electronic structure that are only accessible at high adsorbate coverages in reaction conditions. In addition, while the activity of the dominant active site is nearly the same as that on the unreconstructed WB, the B-rich formations play an important role of isolating the active sites and preventing the passivation of the surface with H 2 bubble formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Computational and Experimental Mechanistic Insights into the Ethanol-to-Butanol Upgrading Reaction over MgO

The mechanism of ethanol upgrading to higher products is still under debate, especially regarding intermediate species and hydrogenation and dehydrogenation steps. In this work, we conducted a combined theoretical and experimental approach to contribute to this discussion. For such, detailed electronic structure density functional theory calculations (aiming at probing density of states, infrared spectra, geometric parameters, charge densities, and reaction energetics) and diffuse reflectance infrared Fourier transform spectroscopy experiments were carried out revealing the relevance of an appropriate combination of reactive surface sites to support the formation of several intermediates that are formed in the C-C coupling over MgO. The roles of Mg and O sites were also studied under an electronic perspective and different geometrical arrangements. We found that a kink configuration was the most adequate for ethanol to 1-butanol upgrading. Our calculations also gave us arguments to propose distinct reaction routes, whose mutual predominance would depend upon reaction temperature. At temperatures up to 573 K, the so-called β-route, which goes through scission of a Cβ-H bond and formation of an oxametallacycle-like intermediate, would dominate the coupling, whereas at higher temperatures, up to 673 K, a more usual Guerbet mechanism, via an aldol coupling step and then consecutive hydrogenations, would be expected. Here, the theoretical conclusions were followed by a careful experimental strategy using sequential experimental planning techniques in order to estimate accurate parameters with the lowest possible experimental load. Information from these different sources were coupled to develop a mathematical model for the rate of the ethanol upgrading reaction, using a Langmuir-Hinshelwood-Hougen-Watson approach. The developed and statistically validated model adequately described the experimental data at 673 K and 1.1 bar total pressure for ethanol partial pressures in the range from 0 to 20 kPa.

09 BIOMASS FUELS↗
DOE OSTI2021

Hydrodechlorination of 1,2-Dichloroethane on Platinum Catalysts: Insights from Reaction Kinetics Experiments, Density Functional Theory, and Microkinetic Modeling

Catalytic hydrodechlorination is a promising strategy for treating industrial 1,2-dichloroethane wastes, for which Pt and Pt-based alloy catalysts are widely used. Here, we performed a detailed mechanistic study for 1,2-dichloroethane hydrodechlorination on Pt using a synergistic approach combining density functional theory (DFT) calculations, reaction kinetics experiments, and microkinetic modeling. Using planewave DFT calculations, we evaluated the reaction energy and activation energy barrier of each elementary step involved in the reaction network on Pt(111). The calculated energetics were then incorporated into a comprehensive mean-field microkinetic model accounting for a total of 65 elementary steps. The model-predicted reaction rates were compared with the results from our reaction kinetics experiments on SiO2-supported Pt catalysts. Our results indicated that the hydrodechlorination of 1,2-dichloroethane on Pt(111) starts with a H-removal step; then, it proceeds through a sequence of alternating dechlorination and dehydrogenation steps until vinylidene (CH 2 C*) is formed; finally, CH 2 C* is hydrogenated to the final product, ethane, sequentially via vinyl (CH 2 CH*), ethylene, and ethyl (CH 3 CH 2 *) intermediates. After model parameter adjustments, we achieved good agreement between our theoretical model and experimental results; the adjustments to the calculated parameters are consistent with the typically anticipated coverage effects. Furthermore, our study offers valuable mechanistic insights, which are useful for improving catalysts for this chemistry.

1,2-dichloroethane↗
DOE OSTI2021

Isolated Metal Sites in Cu–Zn–Y/Beta for Direct and Selective Butene-Rich C 3+ Olefin Formation from Ethanol

Direct and selective production of C 3+ olefins from bioethanol remains a critical challenge and important for the production of renewable transportation fuels such as aviation biofuels. In this study, we report a Cu–Zn–Y/Beta catalyst for selective ethanol conversion to butene-rich C 3+ olefins (88% selectivity at 100% ethanol conversion, 623 K), where the Cu, Zn, and Y sites are all highly dispersed. The ethanol-to-butene reaction network includes ethanol dehydrogenation, aldol condensation to crotonaldehyde, and hydrogenation to butyraldehyde, followed by further hydrogenation and dehydration reactions to form butenes. Cu sites play a critical role in promoting hydrogenation of the crotonaldehyde C═C bond to form butyraldehyde in the presence of hydrogen, making this a distinctive pathway from crotyl alcohol-based ethanol-to-butadiene reaction. Reaction rate measurements in the presence of ethanol and acetaldehyde (543 K, 12 kPa ethanol, 1.2 kPa acetaldehyde, 101.9 kPa H 2 ) over monometallic Zn/Beta and Y/Beta catalysts indicate that Y sites have higher C–C coupling rates than over Zn sites (initial C–C coupling rate, 6.1 × 10 –3 mol mol Y –1 s –1 vs 1.2 × 10 –3 mol mol Zn –1 s –1 ). Further, Lewis-acidic Y-site densities over Cu–Zn–Y/Beta with varied Y loadings are linearly correlated with the initial C–C coupling rates, suggesting that Lewis-acidic Y sites are the predominant sites that catalyze C–C coupling in Cu–Zn–Y/Beta catalysts. Control experiments show that the dealuminated Beta support is important to form higher density of Lewis-acidic Y sites in comparison with other supports such as silica, or deboronated MWW despite similar atomic dispersion of Y sites and Y–O coordination numbers over these supports, leading to more than 9 times higher C–C coupling rate per mole Y over dealuminated Beta relative to other supports. This study highlights the significance of unique combination of metal sites in contributing to the selective valorization of ethanol to C 3+ olefins, motivating for exploring multifunctional zeolite catalysts, where the presence of multiple sites with varying reactivities and functions allows for controlling the predominant molecular fluxes toward the desired products in complex reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Oxidation Dynamics of Supported Catalytic Cu Clusters: Coupling to Fluxionality

Copper oxide nanoclusters have a wide range of catalytic applications, such as the selective oxidation of hydrocarbons. O 2 binding to the catalyst, activation, and release upon reagent oxidation are key events in these catalytic chemistries. Furthermore, these events are expected to be accompanied by significant structural changes of the Cu clusters, because O atoms integrate into the cluster, rather than bind to its surface. Topping the complexity of the problem, partially oxidized Cu clusters are known to exhibit strong fluxionality and feature diverse and interconverting structures and oxygen contents in conditions of oxidative dehydrogenation (ODH). Hence, a significant dynamic coupling between the “hot” O 2 molecule impacting the cluster at reaction temperatures and the cluster fluxionality can be expected. In this work, we focus on the dynamics of dioxygen integration into a partially oxidized Cu cluster supported on hydroxylated amorphous alumina–a system recently reported to be an exceptionally selective catalyst for cyclohexane ODH with very little CO produced, whose mechanistic underpinnings are of utmost interest. The statistics over a swarm of adsorption and scattering trajectories where O 2 hits various sites on the cluster at reaction temperature shows that the O 2 binding does not only follow the minimal energy paths. O 2 also rarely integrates into the cluster in a single step and instead first binds to a single Cu atom via either an η 1 -O 2 or an η 2 -O 2 mode. Surprisingly, this step often has a higher barrier than the subsequent O 2 integration and dissociation, which in turn take multiple steps and complete the oxidation process. Dynamic trajectories starting from the key transition state of integration of the adsorbed O 2 can also lead to different intermediate structures during or right after the dissociation, due to the energy released from the transition state and the thermal intracluster effects. From these activated O 2 chemisorbed structures, O 2 dissociation occurs with moderate barriers (~0.5 eV), producing multiple final oxidized Cu 4 O 4 states. Hence, a diversity of reaction profiles for the attack of supported Cu cluster by O 2 emerges due to the dynamic effects, with implications for mechanisms, kinetic models, and catalyst design principles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Catalytic Tandem CO 2 –Ethane Reactions and Hydroformylation for C3 Oxygenate Production

The strategy of tandem hydroformylation reaction for C3 oxygenate production from CO 2 and ethane represents an opportunity of simultaneously upgrading greenhouse gas CO 2 and the large-reserved shale gas into value-added liquid products. One of the challenges is how to tune and achieve the appropriate ethylene/CO/H 2 ratios for the downstream hydroformylation. Herein, the desired ethylene/CO/H 2 ratios were analyzed and identified by considering different combinations of main and side-reactions of CO 2 and ethane, based on which the PtSn 3 /γ-Al 2 O 3 catalyst was identified as promising to enable the catalytic tandem hydroformylation reaction. Further, the combined studies of reactor evaluation, in situ and ex situ characterization and theoretical calculations revealed that the Pt cluster/SnO x interfacial structures dominated the simultaneous dehydrogenation and dry reforming of ethane, thereby allowing the co-formation of ethylene, CO and H 2 that were subsequently converted to C3 oxygenates in the tandem hydroformylation reactor. The current work not only demonstrates the design principles of suitable catalysts for the tandem-reactor strategy, but also highlights the utilization of CO 2 and shale gas to produce value-added oxygenate products.

03 NATURAL GAS↗