Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DISPLACED”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Search for long-lived particles decaying to jets with displaced vertices in proton-proton collisions at √ s = 13 TeV

A search is presented for long-lived particles produced in pairs in proton-proton collisions at the LHC operating at a center-of-mass energy of 13 TeV . The data were collected with the CMS detector during the period from 2015 through 2018, and correspond to a total integrated luminosity of 140 fb –1 . This search targets pairs of long-lived particles with mean proper decay lengths between 0.1 and 100 mm , each of which decays into at least two quarks that hadronize to jets, resulting in a final state with two displaced vertices. No significant excess of events with two displaced vertices is observed. In the context of R-parity violating supersymmetry models, the pair production of long-lived neutralinos, gluinos, and top squarks is excluded at 95% confidence level for cross sections larger than 0.08 fb, masses between 800 and 3000 GeV, and mean proper decay lengths between 1 and 25 mm.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search in diphoton and dielectron final states for displaced production of Higgs or Z bosons with the ATLAS detector in s = 13 TeV p p collisions

A search is presented for displaced production of Higgs bosons or Z bosons, originating from the decay of a neutral long-lived particle (LLP) and reconstructed in the decay modes H → γ γ and Z → ee . The analysis uses the full Run 2 dataset of proton-proton collisions delivered by the LHC at an energy of $\sqrt{s}$ = 13 TeV between 2015 and 2018 and recorded by the ATLAS detector, corresponding to an integrated luminosity of 139 fb -1 . Exploiting the capabilities of the ATLAS liquid argon calorimeter to precisely measure the arrival times and trajectories of electromagnetic objects, the analysis searches for the signature of pairs of photons or electrons which arise from a common displaced vertex and which arrive after some delay at the calorimeter. The results are interpreted in a gauge-mediated supersymmetry breaking model with pair-produced Higgsinos that decay to LLPs, and each LLP subsequently decays into either a Higgs boson or a Z boson. The final state includes at least two particles that escape direct detection, giving rise to missing transverse momentum. No significant excess is observed above the background expectation. The results are used to set upper limits on the cross section for Higgsino pair production, up to a $\bar{χ}^0_1$ mass of 369 (704) GeV for decays with 100% branching ratio of $\bar{χ}^0_1$ to Higgs (Z) bosons for a $\bar{χ}^0_1$ lifetime of 2 ns. A model-independent limit is also set on the production of pairs of photons or electrons with a significant delay in arrival at the calorimeter.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for displaced photons produced in exotic decays of the Higgs boson using 13 TeV p p collisions with the ATLAS detector

A search is performed for delayed and nonpointing photons originating from the displaced decay of a neutral long-lived particle (LLP). The analysis uses the full run 2 dataset of proton-proton collisions delivered by the LHC at a center-of-mass energy of $\sqrt{s}$ = 13 TeV between 2015 and 2018 and recorded by the ATLAS detector, corresponding to an integrated luminosity of 139 fb -1 . The capabilities of the ATLAS electromagnetic calorimeter are exploited to precisely measure the arrival times and trajectories of photons. The results are interpreted in a scenario where the LLPs are pair produced in exotic decays of the 125 GeV Higgs boson, and each LLP subsequently decays into a photon and a particle that escapes direct detection, giving rise to missing transverse momentum. No significant excess is observed above the expectation due to Standard Model background processes. The results are used to set upper limits on the branching ratio of the exotic decay of the Higgs boson. A model-independent limit is also set on the production of photons with large values of displacement and time delay.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Design of wideband acoustic detectors of gravitational waves equipped with displacement concentrators

We present the concept design of a new class of acoustic detectors of gravitational waves (GWs), which feature a wideband sensitivity. The main novelty relies in the geometry of the test mass, which is equipped with integrated whips. This tapering provides more resonant modes with favorable cross-section to GWs to achieve a large bandwidth. Moreover, the whips act as displacement concentrators and ensure a high mechanical gain at the sensing surfaces. The resulting decrease in mechanical stiffness allows us to achieve the noise matching condition with reasonable operating parameters of the displacement transducer. The performances of the detector are modeled taking into account the quantum and thermal noise sources in the case of a capacitive transducer with a SQUID amplifier. This class of detectors can be designed to target GWs in the frequency range above 1 kHz at a sensitivity comparable to that predicted for future long baseline interferometric detectors. After showing how to scale the design for different constructing materials and target frequencies, we discuss the predicted sensitivity to specific astrophysical signal waveforms.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Physics of nanoscale immiscible fluid displacement

In this work, we investigate immiscible fluid displacement at small scales where slip lengths are on the order of characteristic system sizes, whereby Cox's law is not expected to be valid. Molecular dynamics simulations show that in this limit hydrodynamic bending becomes small and interfaces remain approximately spherical. In this case the only relevant angle for describing the interface shape is the dynamic microscopic angle at the fluid-solid interface. In our simulations, this angle is found to be described well by the molecular-kinetic theory originally proposed by Blake and Haynes. In general, this implies a different functional dependence between the contact angle (and related quantities) and the flow speed (or capillary number); this is demonstrated for the case of the force on the boundary for immiscible fluid displacement in a two-dimensional channel.

42 ENGINEERING↗

Order-disorder versus displacive transitions in Jahn-Teller active layered materials

Large anharmonic vibrations often play a crucial role in dynamically stabilizing crystalline phases whose structures are unstable at low temperature. Although the average structure of such phases can be measured through diffraction experiments, their local structure remains a challenge to characterize and understand. Dynamically stabilized phases are often classified as order/disorder or displacive based on the qualitative nature of their local structure. A robust understanding of how chemistry determines this distinction in behavior, however, is lacking. This article presents a parametric study of an anharmonic vibrational model that describes the transition from a cooperative to a noncooperative Jahn-Teller distortion in layered oxides—a class of materials widely used in Li-ion and Na-ion batteries. The results illustrate how the shape of the energy landscape determines the extent to which the high-temperature phase has order/disorder vs displacive character. In this work, we find that the nature of the high-temperature phase is determined by a competition between the strength of the elastic coupling between Jahn-Teller distortions at nearby sites and the energy scale driving the Jahn-Teller distortion. A comparison of the model to energy landscapes calculated with density-functional theory suggests that the high-temperature phases of the Jahn-Teller active layered compounds LiNiO 2 , NaNiO 2 , LiMnO 2 , and NaMnO 2 exhibit order/disorder character.

36 MATERIALS SCIENCE↗

Defect-induced displacement of topological surface state in quantum magnet MnBi2Te4

The topological magnet MnBi2⁢Te4 (MBT), with gapped topological surface state, is an attractive platform for realizing quantum anomalous Hall and axion insulator states. However, the experimentally observed surface state gaps fail to meet theoretical predictions, although the exact mechanism behind the gap suppression has been debated. Recent theoretical studies suggest that intrinsic antisite defects push the topological surface state away from the MBT surface, closing its gap and making it less accessible to scanning probe experiments. Here, we report on the local effect of defects on the MBT surface states and demonstrate that high defect concentrations lead to a displacement of the surface states well into the MBT crystal, validating the theorized mechanism. The local and global influence of antisite defects on the topological surface states are studied with samples of varying defect densities by combining scanning tunneling microscopy, angle-resolved photoemission spectroscopy, and density functional theory. Our findings identify a combination of increased defect density and reduced defect spacing as the primary factors underlying the displacement of the surface states and suppression of surface gap, guiding further development of topological quantum materials.

Lupke, Felix [Carnegie Mellon University (CMU)]↗

Quantum Sensing of Displacements with Stabilized Gottesman-Kitaev-Preskill States

We demonstrate how recent protocols developed for the stabilization of Gottesman-Kitaev-Preskill states can be used for the estimation of two-quadrature displacement sensing, with sensitivities approaching the multivariate quantum Cramer-Rao bound. Thanks to the stabilization, this sensor is backaction evading and can function continuously without reset, making it well suited for the detection of itinerant signals. Additionally, we provide numerical simulations showing that the protocol can unconditionally surpass the Gaussian limit of displacement sensing with prior information, even in the presence of realistic noise. Our work shows how reservoir engineering in bosonic systems can be leveraged for quantum metrology, with potential applications in force sensing, waveform estimation, and quantum channel learning.

Labarca, Lautaro [Univ. of Sherbrooke, QC (Canada)↗

Using powder XRD and pair distribution function to determine anisotropic atomic displacement parameters of orthorhombic tridymite and tetragonal cristobalite

Determination of the crystal structures of low-temperature tridymite and cristobalite using single-crystal XRD has been challenging because they generally occur as metastable fine-grained crystals in the geological environment. Therefore, using powder diffraction and scattering techniques is critical to study the low-temperature crystals. Synchrotron powder X-ray diffraction (XRD), pair distribution function (PDF) and transmission electron microscopy were used to investigate the structure of orthorhombic tridymite with C 222 1 symmetry and tetragonal cristobalite with P 4 1 2 1 2 symmetry, including their anisotropic atomic displacement parameters (ADPs). Rietveld refinement was used to determine the unit-cell parameters, fractional coordinates and isotropic atomic displacement parameters ( U iso ) of the tridymite and cristobalite. The PDF method was used to determine ADPs for each atom. The results suggest that the crystal structure with high quality ADP values can be obtained using the combined methods of XRD and PDF analyses. The method can be used for characterizing crystals that are not suitable for single-crystal XRD.

Lee, Seungyeol (ORCID:0000000201751389)↗

Supervised Learning-Based Spatial Position Estimation with Vertical Displacement for Hovering UAV Wireless Power Transfer

This study presents a supervised learning-based spatial position estimation approach for wireless power transfer (WPT) systems supporting hovering unmanned aerial vehicle (UAV) charging. Unlike stationary charging scenarios, hovering UAVs introduce continuous lateral misalignment and vertical displacement, leading to variations in magnetic coupling and reduced power transfer efficiency. To address this challenge, the proposed method estimates the relative spatial position of the receiver coil using only electrical measurements obtained at the secondary side. A supervised learning model is trained to map output voltage and current features to spatial coordinates, enabling position awareness without requiring external sensors, vision systems, or communication links. The sensing functionality is inherently integrated into the WPT system, allowing simultaneous power transfer and localization through the same magnetic interface. Experimental validation is conducted on a laboratory-scale prototype under varying lateral offsets and air-gap conditions. In addition, spline-based interpolation is employed to increase spatial data density for training. The results demonstrate that the proposed framework can capture spatial variations associated with both lateral and vertical displacement, providing reliable position estimation under hovering conditions. This work establishes a hardware-efficient, sensorless solution for UAV wireless charging and serves as a baseline for advanced data-driven position estimation methods in dynamic WPT systems.

Asa, Erdem [ORNL] (ORCID:0000000190884812)↗

“Figure‐of‐Eight” Suture‐Button Technique for Fixation of Displaced Anterior Cruciate Ligament Avulsion Fracture

Objective To assess the clinical results of the “figure‐of‐eight” suture‐button technique in the arthroscopic treatment of anterior cruciate ligament (ACL) tibial avulsion fractures. Methods This was a retrospective study reviewing data from September 2013 to June 2019. A total of 27 patients (13 males and 14 females) who underwent arthroscopic “figure‐of‐eight” suture‐button fixation for displaced ACL avulsion fractures were analyzed. The mean age of the patients in the sample was 15.8 years (10–29 years), with a mean follow‐up of 24 months (6–48 months). According to Meyers–McKeever classification, 11 patients were classified as type III and 16 as type IV. All patients were evaluated following the guidelines of the radiological union, the Lysholm knee scoring scale, and the International Knee Documentation Committee (IKDC). Results Fractures were united within 3 months after surgery in all 27 cases. During the last follow‐up, all the anterior drawer and Lachman tests were negative, except in 1 patient whose anterior drawer test was 1° positive. The range of motion was improved from 72.22° ± 27.92° before surgery to 137.78° ± 7.38° at the last follow‐up ( P < 0.05); the Lysholm score was improved from 45.81 ± 10.94 before surgery to 93.04 ± 5.66 at the last follow‐up ( P < 0.05); and the IKDC score was increased from 43.89 ± 11.16 before surgery to 90.26 ± 5.86 at the last follow‐up ( P < 0.05). In 1 patient, an inflammatory reaction was observed at the medial incision of the tibial tubercle; the symptoms disappeared with administration of antibiotics for 1 week. All patients returned to their preinjury physical activities at the last follow‐up. Conclusion The “figure‐of‐eight” suture‐button technique achieves a satisfactory clinical outcome and provides an effective method for the treatment of displaced ACL avulsion fractures.

Kuang, Shi‐da↗

SU-E-J-167: Dosimetric Consequences From Minimal Displacements in APBI with SAVI Applicators

Purpose: To determine the importance of providing proper solid immobilization in every fraction of treatment in APBI with brachytherapy. Methods: 125 patients treated with APBI brachytherapy with SAVI applicators at SFRO Boca Raton, from 2013–2015 were considered for this retrospective study. The CT scans of each patient, which were taken before each treatment, were imported in to the Oncentra treatment planning system. Then they were compared with the initial CT scan which was used for the initial plan. Deviation in displacements in reference to ribs and skin surface was measured and dosimetric evaluations respective to the initial image were performed. Results: Small deviations in displacements were observed from the SAVI applicator to the ribs and the skin surface. Dosimetric evaluations revealed, very small changes in the inter-fractionation position make significant differences in the maximum dose to critical organs. Additionally, the volume of the cavity also changed between fractions. As a Result, the maximum dose manifested variance between 10% and 32% in ribs and skin surface respectively. Conclusion: It appears that taking a CT scan before each treatment is necessary to minimize the risk of delivering undesired high doses to the critical organs. This study indicates, in 30% of the cases re-planning was necessary between treatments. We conclude that, treatment planning teams should evaluate the placement of the device by analyzing the CT images before each treatment and they must be prepared for re-planning if needed. This study also reveals the urgent need of improving the immobilization methods with APBI when treating with the SAVI applicator.

60 APPLIED LIFE SCIENCES↗

Quantum teleportation through an entangled state composed of displaced vacuum and single-photon states

We study a teleportation protocol of an unknown macroscopic qubit by means of a quantum channel composed of the displaced vacuum and single-photon states. The scheme is based on linear optical devices such as a beam splitter and photon number resolving detectors. A method based on conditional measurement is used to generate both the macroscopic qubit and entangled state composed from displaced vacuum and single-photon states. We show that such a qubit has both macroscopic and microscopic properties. In particular, we investigate a quantum teleportation protocol from a macroscopic object to a microscopic state.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Performance of a quantum key distribution protocol with dual-rail displaced photon states

We propose a scheme for a quantum key distribution (QKD) protocol with dual-rail displaced photon states. Displaced single-photon states with different amplitudes carry bit values of code that may be extracted, while coherent states carry nothing and only provide an inconclusive outcome. A real resource of single photons is used, involving imperfections associated with experimental technique that result in a photon state with an admixture of the vacuum state. The protocol is robust against the loss of a single photon and the inefficiency of the detectors. Pulses with large amplitudes, unlike the conventional QKD relying on faint laser pulses, are used that may approximate it to standard telecommunication and may show resistance to eaves-dropping even in settings with high attenuation. Information leakage to the eavesdropper is determined from comparison of the output distributions of the outcomes with ideal ones that are defined by two additional parameters accessible to only those send the pulses. Robustness to some possible eavesdropping attacks is shown.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Density of displacement cascades for cluster ions: An algorithm of calculation and the influence on damage formation in ZnO and GaN

A method of statistical calculation of parameters of averaged individual collision cascades formed by cluster ions composed of a small number of atoms is suggested. The results of calculations are compared with experimental data on the accumulation of structural damage in ZnO and GaN irradiated with PF{sub n} ions (n = 0, 2, 4) with the specific energy of 1.3 keV/amu at room temperature. It is shown that, for ZnO, the density of the displacement cascade does not affect the concentration of stable postimplantation defects in the region of the bulk peak, but significantly affects this concentration in the near-surface region. For GaN, as the displacement-cascade density increases, both an increase in the concentration of stable defects in the region of the bulk maximum of the defect concentration and an increase in the thickness of the surface's amorphous layer are observed.

36 MATERIALS SCIENCE↗

Experimental Determination of the Radial Displacement Field in the Neck of Samples after a Tensile Test

This Letter presents the results of a study of the radial displacement fields arising upon stretching of cylindrical samples before their disintegration. The object of study was sv-07Kh16N6 stainless steel wire containing filiform defects oriented along the sample axis. Using X-ray tomography of the sample necks, the coordinates of the defect points in the sample are determined and the displacement field is recovered from them. The resulting dependence is represented by an approximate formula.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Displaced vertex and disappearing track signatures in type-III seesaw

We investigate a prospect of probing the type-III seesaw neutrino mass generation mechanism at various collider experiments by searching for a disappearing track and a displaced vertex signature originating from the decay of SU(2) L triplet fermion (Σ). Since Σ is primarily produced at colliders through the electroweak gauge interactions, its production rate is uniquely determined by its mass. We find that a Σ particle produces a disappearing track signature from the decay of its charged component, which can be searched at the HL-LHC. Furthermore, we show that if the lightest observed neutrino has a mass of around 10 –9 eV, the neutral component of Σ can be discovered at the proposed MATHUSLA detector. We also show that the charged component of Σ can be potentially be observed at FCC-he as a displaced vertex signature.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Characterizing Electrolyte and Platinum Interface in PEM Fuel Cells Using CO Displacement

Relatively large O 2 transport resistance at the ionomer and Pt interface has been thought to be responsible for the large performance loss at high power for a low Pt loading proton-exchange-membrane fuel cell. A facile method to characterize the interface in the fuel cell electrode is needed. In this study, the CO displacement method was explored on polycrystalline Pt and carbon-supported Pt nanoparticles. The displacement charge coverages were used to quantify the adsorption of perchlorate, sulfate, and perfluorosulfonic acid ionomer. The application of this method in a fuel cell electrode was demonstrated.

25 ENERGY STORAGE↗