Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DISCHARGE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

2D gasdynamic simulation of the kinetics of an oxygen-iodine laser with electric-discharge generation of singlet oxygen

The kinetic processes occurring in an electric-discharge oxygen-iodine laser are analyzed with the help of a 2D (r, z) gasdynamic model taking into account transport of excited oxygen, singlet oxygen, and radicals from the electric discharge and their mixing with the iodine-containing gas. The main processes affecting the dynamics of the gas temperature and gain are revealed. The simulation results obtained using the 2D model agree well with the experimental data on the mixture gain. A subsonic oxygen-iodine laser in which singlet oxygen is generated by a 350 W transverse RF discharge excited in an oxygen flow at a pressure P = 10 Torr and the discharge tube wall is covered with mercury oxide is simulated. The simulated mixing system is optimized in terms of the flow rate and the degree of preliminary dissociation of the iodine flow. The optimal regime of continuous operation of a subsonic electric-discharge oxygen-iodine laser is found.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dark phase effect in the evolution of the positive column of a glow discharge in nitrogen

The characteristics of the initial stage of the formation of the positive column of a glow discharge in nitrogen at reduced pressures are studied experimentally and numerically. A dip in the plasma emission intensity in the initial stage of the discharge (the so-called 'dark phase') is observed experimentally at the positive polarity of the high-voltage electrode (the cathode is grounded). The dark phase is preceded by an ionization wave (IW). When the anode is grounded, neither an IW nor a dip in the discharge emission intensity are observed. A theoretical model capable of describing the discharge development under the actual experimental conditions is constructed. It is shown that the dark phase effect may be caused by the high electron density (above the steady-state one) produced in the gas during the passage of the IW across the discharge gap. This mechanism of the dark phase formation differs from the mechanism proposed earlier to explain a similar effect in noble gases. Additional experiments carried out with pure argon, helium, and helium with a nitrogen admixture have shown that, in the case of a grounded cathode, gas breakdown is also accompanied by the passage of an IW, whereas in the case of a grounded anode, no IW is observed; however, the dark phase is present in both cases. It is shown using computer simulations that, in nitrogen (in contrast to noble gases), the mechanism resulting in the dark phase effect does not operate in the absence of an IW.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Beam discharge excited by distributed virtual cathode

A new type of beam discharge, i.e., beam discharge with a distributed virtual cathode (VC) is proposed and considered by numerical simulation. The discharge is established during counter motion of high-current electron beams in a gas-filled equipotential cavity and is characterized by a state of hot dense electron plasma of primary electrons. The discharge temporal dynamics is studied. It is shown that the VC lifetime depends linearly from this sum in a wide range of the sum of beam currents, from the boundary current of two-beam instability to the critical current of Pierce instability. Generation of nonlinear electrostatic structures shaped as phase bubbles in the discharge is detected, and their dynamics is studied. The parameters are determined, at which the multiple coexistence of phase bubbles and their coalescence during collisions is observed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Two-dimensional simulation of the development of an inhomogeneous volume discharge in a Ne/Xe/HCl gas mixture

The kinetic processes accompanying plasma column formation in an inhomogeneous discharge in a Ne/Xe/HCl gas mixture at a pressure of 4 atm were investigated by using a two-dimensional model. Two cathode spots spaced by 0.7 cm were initiated by distorting the cathode surface at local points, which resulted in an increase in the field strength in the cathode region. Three regimes differing in the charging voltage, electric circuit inductance, and electric field strength at the local cathode points were considered. The spatiotemporal distributions of the discharge current; the electron density; and the densities of excited xenon atoms, HCl(v = 0) molecules in the ground state, and HCl(v > 0) molecules in vibrational levels were calculated. The development of the discharge with increasing the electron density from 10{sup 4} to 10{sup 16} cm{sup -3} was analyzed, and three characteristic stages in the evolution of the current distribution were demonstrated. The width of the plasma column was found to depend on the energy deposited in the discharge. The width of the plasma column was found to decrease in inverse proportion to the deposited energy due to spatiotemporal variations in the rates of electron production and loss. The calculated dependences of the cross-sectional area of the plasma column on the energy deposited in the discharge agree with the experimental results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Process of commutation of a vacuum electric-discharge gap by laser plasma

The temporal parameters of a process of vacuum gap commutation under exposure to a nanosecond pulse of laser radiation incident on the cathode has been studied depending on the radiation energy. Based on the experiment data, it is suggested that a glow discharge is initially ignited in electrode erosion products under exposure to the laser pulse, which due to development of the ionization-overheating instability undergoes the contraction of current channel and transits to an arc discharge. With the radiation energy exceeding a threshold value, the radiation (incident on the cathode) accelerates directly the instability development and the glow discharge transition to the arc discharge due to the radiation absorption in the discharge plasma.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Breakdown in helium in high-voltage open discharge with subnanosecond current front rise

Investigations of high-voltage open discharge in helium have shown a possibility of generation of current pulses with subnanosecond front rise, due to ultra-fast breakdown development. The open discharge is ignited between two planar cathodes with mesh anode in the middle between them. For gas pressure 6 Torr and 20 kV applied voltage, the rate of current rise reaches 500 A/(cm{sup 2} ns) for current density 200 A/cm{sup 2} and more. The time of breakdown development was measured for different helium pressures and a kinetic model of breakdown in open discharge is presented, based on elementary reactions for electrons, ions and fast atoms. The model also includes various cathode emission processes due to cathode bombardment by ions, fast atoms, electrons and photons of resonant radiation with Doppler shift of frequency. It is shown, that the dominating emission processes depend on the evolution of the discharge voltage during the breakdown. In the simulations, two cases of voltage behavior were considered: (i) the voltage is kept constant during the breakdown; (ii) the voltage is reduced with the growth of current. For the first case, the exponentially growing current is maintained due to photoemission by the resonant photons with Doppler-shifted frequency. For the second case, the dominating factor of current growth is the secondary electron emission. In both cases, the subnanosecond rise of discharge current was obtained. Also the effect of gas pressure on breakdown development was considered. It was found that for 20 Torr gas pressure the time of current rise decreases to 0.1 ns, which is in agreement with experimental data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Generation of uniform low-temperature plasma in a pulsed non-self-sustained glow discharge with a large-area hollow cathode

Generation of plasma in a pulsed non-self-sustained glow discharge with a hollow cathode with an area of ≥2 m{sup 2} at gas pressures of 0.4–1 Pa was studied experimentally. At an auxiliary arc-discharge current of 100 A and a main discharge voltage of 240 V, a pulse-periodic glow discharge with a current amplitude of 370 A, pulse duration of 340 μs, and repetition rate of 1 kHz was obtained. The possibility of creating a uniform gas-discharge plasma with a density of up to 10{sup 12} cm{sup −3} and an electron temperature of 1 eV in a volume of >0.2 m{sup 3} was demonstrated. Such plasma can be efficiently used to treat material surfaces and generate pulsed ion beams with a current density of up to 15 mA/cm{sup 2}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Threshold Field That Separates Domains of Subcritical and Deeply Subcritical Microwave Discharges Ignited on a Dielectric Surface

Microwave discharges initiated by an electromagnetic (EM) vibrator and ignited on the inner surface of a dielectric tube in a quasi-optical EM beam are experimentally studied. A threshold level of the microwave field that separates domains of subcritical and deeply subcritical microwave discharges is determined in experiments. Experiments show that streamer channels of the subcritical discharge propagate from the initiator along the propagation direction of the EM wave and in the opposite direction under certain conditions. Variations in the power of the microwave beam can be used to change length of the plasma region of the subcritical discharge along the wave vector of the microwave beam and control the level of the EM energy absorbed in the plasma regions of the deeply subcritical microwave discharge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

20 Year Daily Average Modeled Velocity and Discharge for Openwater Season at Five Communities on Kuskokwim River, Alaska

This dataset includes modeled velocity and discharge at five communities in the middle Kuskokwim River region: Aniak, Chuathbaluk, Crooked Creek, Red Devil and Stony River. Modeled velocities and discharge represent daily averages calculated for the openwater season (OWS) from June 1 - October 18 over the 20 year period 2000-2019 using the raw data described below and included in this archive; full details of methodology are described in (Brown et al. submitted to Renewable Energy). Raw data inputs to inform the modeling process include in-situ measurements of 1) discharge with an acoustic Doppler current meter (ADCP, 600kHz Workhorse Rio Grande by Teledyne RD Instruments) and a global positioning receiver (GPS, Trimble 5700, 5800 and R8) utilizing Real Time Kinematic (RTK) GPS mode over 1-2 days at each site in 2009 or 2010 (Ravens 2014), and 2) river stage with a water level logger (HOBO U20-001-01 by Onset) over 2-9 weeks at each site (Ravens 2014), 3) in addition to a 20 year long-term discharge record collected at the USGS stream gage site in Crooked Creek (USGS 2016). Raw data (discharge and stage) are included in this archive for two additional communities: Lower Kalskag and Sleetmute, where modeled velocities were not calculated due to equipment failure or loss. The USGS stream gage data at Crooked Creek (USGS 2016) and stream gage methodology (Turnipseed and Sauer 2010) are publicly available online, so the data are not duplicated here.

16 TIDAL AND WAVE POWER↗

Machine Learning Assisted Gap-Filled Discharge Data for the East River Community Watershed, Colorado, for Water Years 2014-2021

This dataset contains a collection of machine learning assisted gap-filled discharge data created for all discharge stations across the East River Watershed, Colorado. This data was generated by using raw discharge data collected by Rosemary Carroll, and conducting a random forest machine learning analysis to gap-fill discharge data across all years at the hourly time level. Discharge data with gaps creates problems for analysis of measured and modeled fluxes of carbon and nitrogen exported out of each sub-watershed. Gap-filled data is also required as an input to surface water models, which helps to address our main research question related to how snowmelt timing impacts the timing and magnitude of nitrogen exports. Data is provided in one csv file.

54 ENVIRONMENTAL SCIENCES↗

Magnetic control of breakdown: Toward energy-efficient hollow-cathode magnetron discharges

Characteristics of electrical breakdown of a planar magnetron enhanced with an electromagnet and a hollow-cathode structure, are studied experimentally and numerically. At lower pressures the breakdown voltage shows a dependence on the applied magnetic field, and the voltage necessary to achieve the self-sustained discharge regime can be significantly reduced. At higher pressures, the dependence is less sensitive to the magnetic field magnitude and shows a tendency of increased breakdown voltage at the stronger magnetic fields. A model of the magnetron discharge breakdown is developed with the background gas pressure and the magnetic field used as parameters. The model describes the motion of electrons, which gain energy by passing the electric field across the magnetic field and undergo collisions with neutrals, thus generating new bulk electrons. The electrons are in turn accelerated in the electric field and effectively ionize a sufficient amount of neutrals to enable the discharge self-sustainment regime. The model is based on the assumption about the combined classical and near-wall mechanisms of electron conductivity across the magnetic field, and is consistent with the experimental results. The obtained results represent a significant advance toward energy-efficient multipurpose magnetron discharges.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Negative Medium-Voltage Direct Current Discharges in Air under Simulated Sub-Atmospheric Pressures for All-Electric Aircraft

The increase in the global temperature due to greenhouse gas emissions is a major concern to the world. To achieve the goal of zero emissions by 2050 in the USA the practical realization of all-electric vehicles, particularly all-electric aircraft (AEA), is important. For the design of electrical power systems (EPSs) in all-electric aircraft, a bipolar medium-voltage direct current (MVDC) system of ±5 kV is being investigated. However, several challenges manifest when using such voltages in a low-pressure environment. One of the main challenges is the partial discharge (PD) behavior of the insulation. It is important to study the PD behavior of the insulation by simulating the aviation environment in the lab. This work aimed to study the partial discharge behavior of air under a negative DC voltage in a needle-to-plane electrode geometry by simulating the aviation pressures in the lab. The partial discharge inception voltage (PDIV) and the breakdown voltage (BDV) show an obvious pressure-dependent variation. Regression analysis was performed to better understand the relationship between the PDIV and pressures. Plots were drawn for the average discharge current at each voltage step until breakdown. This paper’s findings can provide valuable insight into the design of EPS for an AEA. To the best of our knowledge, such a study has not been carried out to date.

air discharge↗

Balancing aggradation and progradation on a vegetated delta: The importance of fluctuating discharge in depositional systems

Vegetation is an important component of constructional landscapes, as plants enhance deposition and provide organic sediment that can increase aggradation rates to combat land loss. We conducted two sets of laboratory experiments using alfalfa ( Medicago sativa ) to determine the effects of plants on channel organization and large-scale delta dynamics. In the first set, we found that rapid vegetation colonization enhanced deposition but inhibited channelization via increased form drag that reduced the shear stress available for sediment entrainment and transport. A second set of experiments used discharge fluctuations between flood and base flow (or interflood). Interfloods were critical for reworking the topset via channel incision and lateral migration to create channel relief and prevent rapid plant colonization. These low flow periods also greatly reduced the topset slope in the absence of vegetation by removing topset sediment and delivering it to the shoreline. Floods decreased relief by filling channels with sediment, resulting in periods of rapid progradation and enhanced aggradation over the topset surface, which was amplified by vegetation. The combination of discharge fluctuations and vegetation thus provided a balance of vertical aggradation and lateral progradation. We conclude that plants can inhibit channelization in depositional systems, and that discharge fluctuations encourage channel network organization to naturally balance against aggradation. Furthermore, variations in discharge are an important aspect of understanding the ecomorphodynamics of aggrading surfaces and modeling vegetated deltaic systems, and the combined influences of plants and discharge variations can act to balance vertical and lateral delta growth.

58 GEOSCIENCES↗

Tuning discharge voltage by Schottky electron barrier in P2-Na 2/3 Mg 0.205 Ni 0.1 Fe 0.05 Mn 0.645 O 2

Recently, Mg doped Na metal oxide layered cathode compounds have attracted strong interest for Na-ion battery applications. We report a new type of asymmetric phase evolution between charge and discharge is found to show much-enhanced discharge voltage in P2-Na 2/3 Mg 0.205 Ni 0.1 Fe 0.05 Mn 0.645 O 2 over the parent cathode compound. P2 solid solution is found to show an abnormal coexistence with O2-P2 two-phase reaction during discharge with simultaneous reduction of O, Ni, and Fe redoxes, distinct from the conventional P2-O2 two-phase reaction in the charge. Our analysis suggests that the P2 and O2 two-phase boundary forms a novel unidirectional Schottky barrier to impede electron and Na diffusions in discharge only, thus making the kinetically preferred P2 solid solution phase abnormally coexist with the two-phase region for high discharge voltage and low polarization. Our work demonstrates tuning dynamic evolution of electronic Schottky barrier as a new dimension for advanced kinetic design of high-performance battery cathode materials.

25 ENERGY STORAGE↗

Fundamental benchmarking of the discharge properties of negative electrodes in lead acid batteries

The unprecedented scale of energy storage deployment needed to allow high penetration of intermittent renewable energy sources into the electrical grid places significant economic cost and performance targets on battery technologies. Lead batteries, owing to their highly abundant and inexpensive raw materials, can be considered an important solution to grid storage as long as they achieve high material utilization, fast recharge rates, and long cycle life. To address the limitations in material utilization, we need to revisit the electrochemical processes during the discharge step and answer the following question: what are the fundamental limits of the discharge reaction? In this work we discuss how well-defined lead metal surfaces with nanometer scale roughness allow us to resolve the accessible discharge capacity for both faradaic and non-faradaic processes as a function of electrolyte concentration and in the presence of traditional additives. The direct connection between PbSO 4 layer morphology and discharge rates gives us important insights on the mechanism of discharge as related to the dissolution and passivation events. In conclusion, this work sets the stage for reimagining the design of lead batteries with implications to grid storage applications.

25 ENERGY STORAGE↗

Aqueous Bromide Discharges from U.S. Coal-Fired Power Plants: Points of Origin, Concentration Ranges, and Effluent Treatment Costs

Bromide discharges from coal-fired power plants have received increased attention from regulatory bodies due to their contribution to the formation of disinfection byproducts (DBPs) in downstream drinking water treatment plants. Here, this paper characterizes the relative contributions of bromide from coal feedstocks and bromine-based mercury control processes, estimates the distribution of bromide concentrations at 85 active coal-fired power plants across the United States (U.S.) with wet flue gas desulfurization units, and estimates the cost of bromide removal from wastewater discharge using year 2020 data. Bromide discharges are estimated at the plant level using a combination of the reported coal rank and composition combusted, estimates of bromide addition in mercury control techniques under multiple halogen addition scenarios, and the estimated flue gas desulfurization (FGD) wastewater flow rate. The median, simulated plant-level estimation of total FGD wastewater flow is 18.3 gallons/min at a bromide concentration of 319 mg/L, equivalent to ~11.6 tonnes/year of bromide discharges to the environment. Next, we evaluated the expected cost of employing the best available technology (BAT) to control bromide discharges in FGD wastewater to prevent contributions to DBP formation. Treatment would need to remove more than 99.8% of bromide to reach the 0.2 mg/L voluntary incentive program (VIP) limit. The total cost of treatment depends on whether disposal is on- or off-site; the average costs for all plants combined come to an average of $110 million ($95.2/kgal) in 2021 U.S. dollars for on-site disposal, or $134 million ($115/kgal) for off-site disposal.

01 COAL, LIGNITE, AND PEAT↗

General Equilibrium Analysis of the Cobenefits and Trade-Offs of Carbon Mitigation on Local Industrial Water Use and Pollutants Discharge in China

Carbon mitigation strategies have been developed without sufficient consideration of their impacts on the water system. Here, our study evaluates whether carbon mitigation strategies would decrease or increase local industrial water use and water-related pollutants discharge by using a computable general equilibrium (CGE) model coupled with a water withdrawals and pollutants discharge module in Shenzhen, the fourth largest city in China. To fulfill China’s Nationally Determined Contributions (NDC) targets, Shenzhen’s GDP and welfare losses are projected to be 1.6% and 5.6% in 2030, respectively. The carbon abatement cost will increase from 56 USD/t CO2 in 2020 to 274 USD/t CO2 in 2030. The results reveal that carbon mitigation accelerates local industrial structure upgrading by restricting carbon-, energy-, and water-intensive industries, e.g., natural gas mining, nonmetal, agriculture, food production, and textile sectors. Accordingly, carbon mitigation improves energy use efficiency and decreases 55% of primary energy use in 2030. Meanwhile, it reduces 4% of total industrial water use and 2.2–2.4% of two major pollutants discharge, i.e., CODCr and NH3–N. Carbon mitigation can also decrease petroleum (2.2%) and V-ArOH (0.8%) discharge but has negative impacts on most heavy metal(loid)s pollutants discharge (increased by -0.01% to 4.6%). These negative impacts are evaluated to be negligible on the environment. This study highlights the importance of considering the energy–water nexus for better-coordinated energy and water resources management at local and national levels.

Su, Qiong↗

Lithium–Sulfur Batteries with the Lowest Self-Discharge and the Longest Shelf life

Lithium-sulfur (Li-S) batteries are promising as a nextgeneration energy-storage device because their energy density is higher than that of current Li-ion technology. However, in comparison to Li-ion batteries, Li-S batteries encounter much faster self-discharge and shorter shelf life. Unfortunately, the lack of literature against the realities of severe self-discharge makes developing a practically viable Li-S technology a daunting challenge. Here, we present low self-discharge (LSD) Li-S batteries that have the lowest self-discharge constant of 0.0022 per day and the longest shelf life of one year. The superior electrochemical stability of the LSD Li-S batteries is reflected in a low capacity-fade rate of only 0.14% per day over the extended experimental time period. In addition, an analysis of the Li-S articles investigating the self-discharge effect in the literature reveals that the LSD Li-S batteries presented here offer a greater than 12-fold improvement in the cell shelf life with good cycling stability.

25 ENERGY STORAGE↗