Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Comparative Study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2013

An optimized posterior axillary boost technique in radiation therapy to supraclavicular and axillary lymph nodes: A comparative study

To assess the advantages of an optimized posterior axillary (AX) boost technique for the irradiation of supraclavicular (SC) and AX lymph nodes. Five techniques for the treatment of SC and levels I, II, and III AX lymph nodes were evaluated for 10 patients selected at random: a direct anterior field (AP); an anterior to posterior parallel pair (AP-PA); an anterior field with a posterior axillary boost (PAB); an anterior field with an anterior axillary boost (AAB); and an optimized PAB technique (OptPAB). The target coverage, hot spots, irradiated volume, and dose to organs at risk were evaluated and a statistical analysis comparison was performed. The AP technique delivered insufficient dose to the deeper AX nodes. The AP-PA technique produced larger irradiated volumes and higher mean lung doses than the other techniques. The PAB and AAB techniques originated excessive hot spots in most of the cases. The OptPAB technique produced moderate hot spots while maintaining a similar planning target volume (PTV) coverage, irradiated volume, and dose to organs at risk. This optimized technique combines the advantages of the PAB and AP-PA techniques, with moderate hot spots, sufficient target coverage, and adequate sparing of normal tissues. The presented technique is simple, fast, and easy to implement in routine clinical practice and is superior to the techniques historically used for the treatment of SC and AX lymph nodes.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2018

A comparative study of hydrogen embrittlement of 20SiMn2CrNiMo, PSB1080 and PH13-8Mo high strength steels

The present study has attempted to evaluate the hydrogen embrittlement (HE) of commercial 20SiMn2CrNiMo, PSB1080 and PH13-8Mo high strength steels using slow strain rate tensile tests with smooth cylindrical tensile specimens. The results reveal that three steels exhibit the superior strength and plasticity in the absence of hydrogen. However, the mechanical properties are deteriorated after hydrogen charging and the resistance to HE is 20SiMn2CrNiMo steel, PH13-8Mo steel and PSB1080 steel, which is ranked in a decreasing order. Fine lath boundaries in 20SiMn2CrNiMo steel disperse hydrogen atoms, reduce local hydrogen accumulation and then result in the lowest HE. Coherent NiAl precipitates in PH13-8Mo steel and O-Mg-Al-Si-Ca type inclusions in PSB1080 steel are responsible for the high HE susceptibility due to the concurrent effect of the stress concentration and hydrogen-enhanced decohesion mechanism. It is thus suggested that the inclusions in steels should be eliminated and the efforts concerning to obtain low HE susceptibility in steels strengthened by the coherent precipitates should be conducted to guarantee the safe service of engineering components fabricated from high strength steels.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Experiment-modeling studies comparing energy dissipation in the DIII-D SAS and SAS-VW divertors

Recent DIII-D experiments on Small Angle Slot (SAS) divertors have confirmed that a combination of divertor closure and target shaping can enhance cooling across the divertor target and increase energy dissipation, but with significant dependence on B T (toroidal magnetic field) direction. In these novel divertors, the roles of closure, target shaping, drifts, and scale lengths are all interconnected in optimizing dissipation, with the separatrix electron density n eSEP being the key parameter associated with the level of dissipation/detachment. After modifying the original flat-targeted graphite SAS to include a V shape with a tungsten coating on the outer side of the divertor (SAS-VW), matched series of discharges were run to compare to detailed SOLPS-ITER modeling. Experimentally, when run as designed with the outer strike point at the slot vertex, SAS-VW requires nearly identical n eSEP for detachment as the original SAS, with little difference in dissipation for the new geometry. This is in contrast to (1) earlier modeling predictions that a small change of the SAS geometry to a V shape should enhance dissipation at the same n eSEP for magnetic configurations having better H-mode access (ion B × ∇B drift directed into the divertor), and (2) despite the achievement of significantly higher (2-7x) neutral pressures and compression in the SAS-VW slot. Comparisons of experimental density scans to the most recent SOLPS-ITER modeling with ExB drifts show reasonable agreement for dissipation/detachment onset when using separatrix density as the independent parameter. In order to help understand the discrepancy in modeled vs actual performance for the new configuration, additional measurements varying gas injection location and impurity injection were undertaken. In-slot D 2 gas fueling is more effective (5–22 %) in promoting detachment, in accord with modeling. In-slot impurity injection (N 2 or Ne) can yield 30 % lower core Z eff and 15 % less confinement degradation after detachment compared to main chamber puffing, as well as relatively lower tungsten leakage from the divertor. Modeling can also reproduce the improved detachment seen as the strike point moves inboard of the slot vertex. While we can explain the effects of the most important parameters causing energy dissipation in these slot divertors, it remains that many aspects of their behavior cannot be accurately modeled using state-of-art codes such as SOLPS-ITER. This is of concern for future model-driven designs utilizing similar V-shaped geometries.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Comparative study with two reduced test facilities for air-cooled RCCS scaling law

Korea Atomic Energy Research Institute (KAERI) and Argonne National Laboratory (ANL) conducted steady-state tests at constant heat flux conditions to investigate the scale effect on heat removal behavior of the air-cooled Reactor Cavity Cooling System (RCCS). Two differently scaled-down test facilities were used in this study, KAERI’s ¼ scale with 4.0-m cavity height, and ANL’s ½ scale with 6.8-m cavity height. Two scaling laws were proposed to simulate the radiation across the cavity and the buoyancy-driven duct flow in the riser, respectively. The test matrix for KAERI and ANL test facilities focused on the scaling effect of the heated riser length with constant heat flux at the PMR200 RCCS design. The test results showed that mixed convection in the riser duct is an important factor for accurately extrapolating the thermo-fluid behavior in the prototype from the test results in the scale-down facilities. The system analysis code, GAMMA+, with improved heat transfer models predicted fairly well the air-cooled RCCS test data from two facilities. GAMMA+ analysis results showed that the predicted radiation fractions on the heated plate in the scale-down test conditions were larger than those on the reactor vessel in the prototype. The scaling law for air-cooled RCCS was improved by considering the mixed convection in the riser duct and the same radiation fraction on the heated plate. The mixed convection effect was calculated by the height ratio. The same radiation fraction provided a conservative extrapolation from the scale-down test results.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2026

An ICP-OES method for the precise and accurate quantification of rare earth elements in natural water: A comparative study from mine waste sites in New Mexico, USA

Inductively coupled plasma techniques such as ICP-OES and ICP-MS are routinely used to determine the concentrations of rare earth elements (REE) in water samples. However, their performance for the determination of REE concentration in mine drainage waters from epithermal vein and porphyry copper mining districts has not been evaluated extensively. In this work, we develop an REE analysis method on an Agilent 5900 ICP-OES instrument and assess the accuracy and precision for the quantification of REE in the natural waters collected from mine adits and an acid seep of mine sites in the Steeple Rock and Hillsboro mining districts, New Mexico, USA. The total REE concentrations in the water samples were measured using the methods we developed for both ICP-OES and ICP-MS. The power of the new ICP-OES method lies in routine analysis of μg/L level concentrations normally analyzed using ICP-MS, including a U.S. Geological Survey standard reference sample, laboratory blank samples spiked with a National Institute of Standards and Technology traceable standard, and surface water samples from mine waste sites. This ICP-OES method achieves low quantification limits ranging from 0.2 to 5 μg/L and excellent analytical accuracy and precision for REE analysis. The precision of light (La-Gd) and heavy (Tb-Lu) REE analysis using this method are better than 5% at average concentrations above 5 ± 4 μg/L and 3 ± 2 μg/L, respectively, and 3% at average concentrations above 10 ± 9 μg/L and 5 ± 4 μg/L, respectively. This method also shows excellent sensitivity and reproducibility for our laboratory and field samples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

A comparative study of multimodal data fusion strategies for planetary spectroscopy

Integrating heterogeneous data sources can improve scientific inference when different modalities capture complementary information, but doing so is challenging in high-dimensional, small-sample settings. In spectroscopy for planetary exploration, Laser-Induced Breakdown Spectroscopy (LIBS), Raman Spectroscopy (Raman), Visible Infrared Spectroscopy (VISIR), and Mid-Infrared Spectroscopy (MIR) each examine different aspects of composition and mineralogy, raising fundamental questions about when and how data fusion improves predictive performance. Using a Mars-relevant set of geologic standards with measurements from all four modalities, we present a rigorous systematic evaluation of four data fusion strategies: low-level (data) fusion, mid-level (feature) fusion, high-level (decision) fusion, and residual-boosting (sequential) fusion. We assess performance in predicting oxide composition via nested cross-validation and corrected significance testing to evaluate whether data fusion improves upon single-modality baselines. We show that data fusion does not uniformly improve accuracy, and that observed gains are modest, oxide-dependent, and sensitive to modality and model structure. To move beyond aggregate accuracy metrics, we use model coefficients, permutation importance, and residual gain analysis to examine how the fusion models weight individual modalities and to identify patterns of apparent complementarity or redundancy. Though focused on spectroscopy for planetary exploration, our framework for data fusion evaluation and interpretation extends to other scientific domains with heterogeneous and scarce data and provides a principled approach evaluating data fusion strategies, interpreting modality contributions, and understanding tradeoffs among data fusion strategies.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2015

A comparative study of microstructural stability and sulphur diffusion in CdS/CdTe photovoltaic devices

The role of CdCl2 activation in the production of high quality CdTe-based photovoltaic devices remains a subject of much debate. In this study, CdTe-based cells produced in three independent laboratories using different device fabrication technologies are investigated before and after CdCl2 activation with regard to structural changes (recrystallisation and grain growth) and sulphur out-diffusion. Using scanning transmission electron microscopy (STEM) and x-ray diffraction it is demonstrated that CdCl2 activation of the investigated cells produces no statistical structural changes to the CdTe. Additionally, energy dispersive spectrometry (EDS) performed in the STEM on the same samples illustrates that the change in sulphur diffusion following activation is more limited than expected from previous studies; no change is detectable when the thermal budget for CdTe deposition is significantly greater than that for activation. This suggests that the efficiency enhancement during CdCl2 treatment is not due to sulphur out-diffusion. Lastly, cathodoluminescence microscopy is used to demonstrate in two dimensions how sulphur diffuses into a model sample and the results are found to be consistent with STEM-EDS. Some spectroscopic evidence for enhanced sulphur diffusion along grain boundaries is also observed.

14 SOLAR ENERGY↗
DOE OSTI2012

Comparative study on 2,2′,4,5,5′-pentachlorobiphenyl-mediated decrease in serum thyroxine level between C57BL/6 and its transthyretin-deficient mice

The relationships between the changes in the levels of serum total thyroxine (T{sub 4}), serum T{sub 4}-transthyretin (TTR) complex, and accumulation of T{sub 4} in tissues by 2,2′,4,5,5′-pentachlorobiphenyl (PentaCB) were examined using wild-type C57BL/6 (WT) and its TTR-deficient (TTR-null) mice. The constitutive level of serum total T{sub 4} was much higher in WT mice than in TTR-null mice. In WT mice 4 days after a single intraperitoneal injection with PentaCB (112 mg/kg), serum total T{sub 4} level was significantly decreased along with a decrease in serum T{sub 4}–TTR complex, and the levels of serum total T{sub 4} in the PentaCB-treated WT mice were almost the same to those in PentaCB-untreated (control) TTR-null mice. In addition, a slight decrease in serum total T{sub 4} by PentaCB treatment was observed in TTR-null mice. Furthermore, clearance of [{sup 125}I]T{sub 4} from the serum after [{sup 125}I]T{sub 4}-administration was promoted by the PentaCB-pretreatment in either strain of mice, especially WT mice. On the other hand, accumulation level of [{sup 125}I]T{sub 4} in the liver, but not in extrahepatic tissues, was strikingly enhanced in the PentaCB-pretreated WT and TTR-null mice. Furthermore, in both strains of mice, PentaCB-pretreatment led to significant increases in the steady-state distribution volume of [{sup 125}I]T{sub 4} and the concentration ratio of the liver to serum. The present findings demonstrate that PentaCB-mediated decrease in serum T{sub 4} level occurs mainly through increase in accumulation level of T{sub 4} in the liver and further indicate that the increased accumulation of T{sub 4} in the liver of WT mice is primarily dependent on the PentaCB-mediated inhibition of serum T{sub 4}–TTR complex formation.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2013

Comparative study of genotoxicity and tissue distribution of nano and micron sized iron oxide in rats after acute oral treatment

Though nanomaterials (NMs) are being utilized worldwide, increasing use of NMs have raised concerns over their safety to human health and environment. Iron oxide (Fe{sub 2}O{sub 3}) NMs have important applications. The aim of this study was to assess the genotoxicity of Fe{sub 2}O{sub 3}-30 nm and Fe{sub 2}O{sub 3}-bulk in female Wistar rats. Fe{sub 2}O{sub 3}-30 nm was characterized by using transmission electron microscopy, dynamic light scattering, laser Doppler velocimetry and surface area analysis. The rats were treated orally with the single doses of 500, 1000, 2000 mg/kg bw of Fe{sub 2}O{sub 3}-30 nm and Fe{sub 2}O{sub 3} –bulk. The genotoxicity was evaluated at 6, 24, 48 and 72 h by the comet assay in leucocytes, 48 and 72 h by micronucleus test (MNT) in peripheral blood cells, 18 and 24 h by chromosomal aberration (CA) assay and 24 and 48 h by MNT in bone marrow cells. The biodistribution of iron (Fe) was carried out at 6, 24, 48 and 72 h after treatment in liver, spleen, kidney, heart, brain, bone marrow, urine and feces by using atomic absorption spectrophotometry. The % tail DNA, frequencies of micronuclei and CAs were statistically insignificant (p > 0.05) at all doses. These results suggest that Fe{sub 2}O{sub 3}-30 nm and Fe{sub 2}O{sub 3}-bulk was not genotoxic at the doses tested. Bioavailability of Fe was size and dose dependent in all the tissues from the groups exposed to Fe{sub 2}O{sub 3}-30 nm. Fe{sub 2}O{sub 3} NMs were able to enter in the organs and the rats are biocompatible with much higher concentration of Fe. However, the accumulated Fe did not cause significant genotoxicity. This study provides additional knowledge about the toxicology of Fe{sub 2}O{sub 3} NMs. -- Highlights: ► Fe{sub 2}O{sub 3}-30 nm and Fe{sub 2}O{sub 3}-bulk were orally administered to rats with single doses. ► The nano and bulk Fe{sub 2}O{sub 3} showed insignificant results with MNT, comet and CA assays. ► The bulk was excreted via feces whereas the NMs were found both in urine and feces. ► The NMs mainly accumulated in the liver, spleen, kidney, heart and bone marrow. ► However the accumulated Fe did not cause significant genotoxicological effects.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2014

Dioxin-induced retardation of development through a reduction in the expression of pituitary hormones and possible involvement of an aryl hydrocarbon receptor in this defect: A comparative study using two strains of mice with different sensitivities to dioxin

We have previously revealed that treating pregnant rats with 2,3,7,8-tetracholorodibenzo-p-dioxin (TCDD) reduces the expression of gonadotropins and growth hormone (GH) in the fetal and neonatal pituitary. A change in gonadotropin expression impairs the testicular expression of steroidogenic proteins in perinatal pups, and imprint defects in sexual behavior after reaching maturity. In this study, we examined whether TCDD also affects the expression of gonadotropin and GH in mice using C57BL/6J and DBA/2J strains which express the aryl hydrocarbon receptor (Ahr) exhibiting a different affinity for TCDD. When pregnant C57BL/6J mice at gestational day (GD) 12 were given oral TCDD (0.2–20 μg/kg), all doses significantly attenuated the pituitary expression of gonadotropin mRNAs in fetuses at GD18. On the other hand, in DBA/2J mice, a much higher dose of TCDD (20 μg/kg) was needed to produce a significant attenuation. Such reduction in the C57BL/6J strain continued until at least postnatal day (PND) 4. In agreement with this, TCDD reduced the testicular expression of steroidogenic proteins in C57BL/6J neonates at PND2 and 4, although the same did not occur in the fetal testis and ovary. Furthermore, TCDD reduced the perinatal expression of GH, litter size and the body weight of newborn pups only in the C57BL/6J strain. These results suggest that 1) also in mice, maternal exposure to TCDD attenuates gonadotropin-regulated steroidogenesis and GH expression leading to the impairment of pup development and sexual immaturity; and 2) Ahr activation during the late fetal and early postnatal stages is required for these defects. - Highlights: • The effect of 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) on mouse growth was studied. • TCDD reduced the levels of luteinizing hormone and growth hormone in perinatal pups. • Maternal exposure to TCDD also attenuated testicular steroidogenesis in pups. • The above effects of TCDD were more pronounced in C57BL/6J than in DBA/2J strain. • TCDD seems to disturb pup maturation by activating aryl hydrocarbon receptor.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2016

Comparative study of adipose-derived stem cells and bone marrow-derived stem cells in similar microenvironmental conditions

Mesenchymal stem cells (MSCs), which were first isolated from the bone marrow, are now being extracted from various other tissues in the body, including the adipose tissue. The current study presents systematic evidence of how the adipose tissue-derived stem cells (ASCs) and bone marrow-derived mesenchymal stem cells (Bm-MSCs) behave when cultured in specific pro-adipogenic microenvironments. The cells were first characterized and identified as MSCs in terms of their morphology, phenotypic expression, self-renewal capabilities and multi-lineage potential. Subsequently, the proliferation and gene expression profiles of the cell populations cultured on two-dimensional (2D) adipose tissue extracellular matrix (ECM)-coated tissue culture plastic (TCP) and in three-dimensional (3D) AlgiMatrix® microenvironments were analyzed. Overall, it was found that adipogenesis was triggered in both cell populations due to the presence of adipose tissue ECM. However, in 3D microenvironments, ASCs and Bm-MSCs were predisposed to the adipogenic and osteogenic lineages respectively. Overall, findings from this study will contribute to ongoing efforts in adipose tissue engineering as well as provide new insights into the role of the ECM and cues provided by the immediate microenvironment for stem cell differentiation. - Highlights: • Native adipose tissue ECM coated on 2D TCP triggers adipogenesis in both ASCs and Bm-MSCs. • A 3D microenvironment with similar stiffness to adipose tissue induces adipogenic differentiation of ASCs. • ASCs cultured in 3D alginate scaffolds exhibit predisposition to adipogenesis. • Bm-MSCs cultured in 3D alginate scaffolds exhibit predisposition to osteogenesis. • The native microenvironment of the cells affects their differentiation behaviour in vitro.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

Comparative study of two Saccharomyces cerevisiae strains with kinetic models at genome-scale

The parameterization of kinetic models requires measurement of fluxes and/or metabolite levels for a base strain and a few genetic perturbations thereof. Unlike stoichiometric models that are mostly invariant to the specific strain, it remains unclear whether kinetic models constructed for different strains of the same species have similar or significantly different kinetic parameters. This important question underpins the applicability range and prediction limits of kinetic reconstructions. To this end, herein we parameterize two separate large-scale kinetic models using K-FIT with genome-wide coverage corresponding to two distinct strains of Saccharomyces cerevisiae: CEN.PK 113-7D strain (model k-sacce306-CENPK), and growth-deficient BY4741 (isogenic to S288c; model k-sacce306-BY4741). The metabolic network for each model contains 306 reactions, 230 metabolites, and 119 substrate-level regulatory interactions. The two models (for CEN.PK and BY4741) recapitulate, within one standard deviation, 77% and 75% of the fitted dataset fluxes, respectively, determined by 13 C metabolic flux analysis for wild-type and eight single-gene knockout mutants of each strain. Strain-specific kinetic parameterization results indicate that key enzymes in the TCA cycle, glycolysis, and arginine and proline metabolism drive the metabolic differences between these two strains of S. cerevisiae. Our results suggest that although kinetic models cannot be readily used across strains as stoichiometric models, they can capture species-specific information through the kinetic parameterization process.

59 BASIC BIOLOGICAL SCIENCES↗