Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Climate Scenarios”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Uncertainties in Predicting Rice Yield by Current Crop Models Under a Wide Range of Climatic Conditions

Predicting rice (Oryza sativa) productivity under future climates is important for global food security. Ecophysiological crop models in combination with climate model outputs are commonly used in yield prediction, but uncertainties associated with crop models remain largely unquantified. We evaluated 13 rice models against multi-year experimental yield data at four sites with diverse climatic conditions in Asia and examined whether different modeling approaches on major physiological processes attribute to the uncertainties of prediction to field measured yields and to the uncertainties of sensitivity to changes in temperature and CO2 concentration [CO2]. We also examined whether a use of an ensemble of crop models can reduce the uncertainties. Individual models did not consistently reproduce both experimental and regional yields well, and uncertainty was larger at the warmest and coolest sites. The variation in yield projections was larger among crop models than variation resulting from 16 global climate model-based scenarios. However, the mean of predictions of all crop models reproduced experimental data, with an uncertainty of less than 10 percent of measured yields. Using an ensemble of eight models calibrated only for phenology or five models calibrated in detail resulted in the uncertainty equivalent to that of the measured yield in well-controlled agronomic field experiments. Sensitivity analysis indicates the necessity to improve the accuracy in predicting both biomass and harvest index in response to increasing [CO2] and temperature.

crop-model ensembles↗

Compounding Impacts of Human-Induced Water Stress and Climate Change on Water Availability

The terrestrial phase of the water cycle can be seriously impacted by water management and human water use behavior (e.g., reservoir operation, and irrigation withdrawals). Here we outline a method for assessing water availability in a changing climate, while explicitly considering anthropogenic water demand scenarios and water supply infrastructure designed to cope with climatic extremes. The framework brings a top-down and bottom-up approach to provide localized water assessment based on local water supply infrastructure and projected water demands. When our framework is applied to southeastern Australia we find that, for some combinations of climatic change and water demand, the region could experience water stress similar or worse than the epic Millennium Drought. We show considering only the influence of future climate on water supply, and neglecting future changes in water demand and water storage augmentation might lead to opposing perspectives on future water availability. While human water use can significantly exacerbate climate change impacts on water availability, if managed well, it allows societies to react and adapt to a changing climate. The methodology we present offers a unique avenue for linking climatic and hydrologic processes to water resource supply and demand management and other human interactions.

Climate-change policyHydrology↗

The Importance of Internal Climate Variability in Climate Impact Projections

Uncertainty in climate projections is driven by three components: scenario uncertainty, intermodel uncertainty, and internal variability. Although socioeconomic climate impact studies increasingly take into account the first two components, little attention has been paid to the role of internal variability, although underestimating this uncertainty may lead to underestimating the socioeconomic costs of climate change. Using large ensembles from seven coupled general circulation models with a total of 414 model runs, we partition the climate uncertainty in classic dose–response models relating county-level corn yield, mortality, and per-capita gross domestic product to temperature in the continental United States. The partitioning of uncertainty depends on the time frame of projection, the impact model, and the geographic region. Internal variability represents more than 50% of the total climate uncertainty in certain projections, including mortality projections for the early 21st century, although its relative influence decreases over time. We recommend including uncertainty due to internal variability for many projections of temperature-driven impacts, including early-century and midcentury projections, projections in regions with high internal variability such as the Upper Midwest United States, and impacts driven by nonlinear relationships.

climate impacts↗

Pliocene and Eocene Provide Best Analogs for Near-Future Climates

As the world warms due to rising greenhouse gas concentrations, the Earth system moves toward climate states without societal precedent, challenging adaptation. Past Earth system states offer possible model systems for the warming world of the coming decades. These include the climate states of the Early Eocene (ca. 50 Ma), the Mid-Pliocene (3.3–3.0 Ma), the Last Interglacial (129–116 ka), the Mid-Holocene (6 ka), preindustrial (ca. 1850 CE), and the 20th century. Here, we quantitatively assess the similarity of future projected climate states to these six geohistorical benchmarks using simulations from the Hadley Centre Coupled Model Version 3 (HadCM3), the Goddard Institute for Space Studies Model E2-R (GISS), and the Community Climate System Model, Versions 3 and 4 (CCSM) Earth system models. Under the Representative Concentration Pathway 8.5 (RCP8.5) emission scenario, by 2030 CE, future climates most closely resemble Mid-Pliocene climates, and by 2150 CE, they most closely resemble Eocene climates. Under RCP4.5, climate stabilizes at Pliocene-like conditions by 2040 CE. Pliocene-like and Eocene-like climates emerge first in continental interiors and then expand outward. Geologically novel climates are uncommon in RCP4.5 (<1%) but reach 8.7% of the globe under RCP8.5, characterized by high temperatures and precipitation. Hence, RCP4.5 is roughly equivalent to stabilizing at Pliocene-like climates, while unmitigated emission trajectories, such as RCP8.5, are similar to reversing millions of years of long-term cooling on the scale of a few human generations. Both the emergence of geologically novel climates and the rapid reversion to Eocene-like climates may be outside the range of evolutionary adaptive capacity.

climate change↗

Using a Multi‐Institutional Ensemble of Watershed Models to Assess Agricultural Conservation Effectiveness in a Future Climate

This study investigates the combined impacts of climate change and agricultural conservation on the magnitude and uncertainty of nutrient loadings in the Maumee River Watershed, the second-largest watershed of the Laurentian Great Lakes. Two scenarios — baseline agricultural management and increased agricultural conservation — were assessed using an ensemble of five Soil and Water Assessment Tools driven by six climate models. The increased conservation scenario included raising conservation adoption rates from a baseline of existing conservation practices to feasible rates in the near future based on farmer surveys. This increased adoption of winter cover crops on 6%–10% to 60% of cultivated cropland; subsurface placement of phosphorus fertilizers on 35%–60% to 68% of cultivated cropland; and buffer strips intercepting runoff from 29%–34% to 50% of cultivated cropland. Increased conservation resulted in statistically significant (p ≤ 0.05) reductions in annual loads of total phosphorus (41%), dissolved reactive phosphorus (18%), and total nitrogen (14%) under the highest emission climate scenario (RCP 8.5). While nutrient loads decreased with increased conservation relative to baseline management for all watershed models, different conclusions on the true effectiveness of conservation under climate change may be drawn if only one watershed model was used.

54 ENVIRONMENTAL SCIENCES↗

How does humidity data impact land surface modeling of hydrothermal regimes at a permafrost site in Utqia$\mathrm{\dot{g}}$vik, Alaska?

Humidity is a basic and crucial meteorological indicator commonly measured in several forms, including specific humidity, relative humidity, and absolute humidity. These different forms can be inter-derived based on the saturation vapor pressure (SVP). In past decades, dozens of formulae have been developed to calculate the SVP with respect to, and in equilibrium with, liquid water and solid ice surfaces, but many prior studies use a single function for all temperature ranges, without considering the distinction between over the liquid water and ice surfaces. These different approaches can result in humidity estimates that may impact our understanding of surface-subsurface thermal-hydrological dynamics in cold regions. In this study, we compared the relative humidity (RH) downloaded and calculated from four data sources in Alaska based on five commonly used SVP formulas. These RHs, along with other meteorological indicators, were then used to drive physics-rich land surface models at a permafrost-affected site. Here, we found that higher values of RH (up to 40%) were obtained if the SVP was calculated with the over-ice formulation when air temperatures were below freezing, which could lead to a 30% maximum difference in snow depths. The choice of whether to separately calculate the SVP over an ice surface in winter also produced a significant range (up to 0.2 m) in simulated annual maximum thaw depths. The sensitivity of seasonal thaw depth to the formulation of SVP increases with the rainfall rate and the height of above-ground ponded water, while it diminishes with warmer air temperatures. These results show that RH variations based on the calculation of SVP with or without over-ice calculation meaningfully impact physically-based predictions of snow depth, sublimation, soil temperature, and active layer thickness. Under particular conditions, when severe flooding (inundation) and cool air temperatures are present, care should be taken to evaluate how humidity data is estimated for land surface and earth system modeling.

54 ENVIRONMENTAL SCIENCES↗

Food–energy–water implications of negative emissions technologies in a +1.5 °C future

Scenarios for meeting ambitious climate targets rely on large-scale deployment of negative emissions technologies (NETs), including direct air capture (DAC). However, the tradeoffs between food, water and energy created by deploying different NETs are unclear. Here we show that DAC could provide up to 3 GtCO 2 yr -1 of negative emissions by 2035—equivalent to 7% of 2019 global CO 2 emissions—based on current-day assumptions regarding price and performance. DAC in particular could exacerbate demand for energy and water, yet it would avoid the most severe market-mediated effects of land-use competition from bioenergy with carbon capture and storage and afforestation. This could result in staple food crop prices rising by approximately fivefold relative to 2010 levels in many parts of the Global South, raising equity concerns about the deployment of NETs. Overall, these results highlight that delays in aggressive global mitigation action greatly increase the requirement for DAC to meet climate targets, and correspondingly, energy and water impacts.

54 ENVIRONMENTAL SCIENCES↗

The Science, Engineering, and Validation of Marine Carbon Dioxide Removal and Storage

Scenarios to stabilize global climate and meet international climate agreements require rapid reductions in human carbon dioxide (CO 2 ) emissions, often augmented by substantial carbon dioxide removal (CDR) from the atmosphere. While some ocean-based removal techniques show potential promise as part of a broader CDR and decarbonization portfolio, no marine approach is ready yet for deployment at scale because of gaps in both scientific and engineering knowledge. Marine CDR spans a wide range of biotic and abiotic methods, with both common and technique-specific limitations. Further targeted research is needed on CDR efficacy, permanence, and additionality as well as on robust validation methods—measurement, monitoring, reporting, and verification—that are essential to demonstrate the safe removal and long-term storage of CO 2 . Engineering studies are needed on constraints including scalability, costs, resource inputs, energy demands, and technical readiness. Research on possible co-benefits, ocean acidification effects, environmental and social impacts, and governance is also required.

climate mitigation↗

Powering Negative-Emissions Technologies with Marine Renewable Energy

The majority of modeled emissions scenarios that meet the climate change goals outlined in the 2015 Paris Agreement require not only significant reductions in anthropogenic carbon dioxide emissions, but also removal of carbon dioxide from the atmosphere ("negative emissions"). To date, research and development efforts have largely focused on land-based negative emissions technologies, such as bioenergy with carbon capture and storage. However, ocean-based technologies also have significant potential, and avoid competition for land use and fresh water with agriculture and human development. Marine carbon dioxide removal approaches include biological solutions that seek to increase carbon fixation through photosynthesis and chemical solutions that aim to increase the absorption of carbon dioxide in seawater. Most of these approaches have significant power requirements, especially when implemented at the scale necessary to meet negative-emissions goals. Marine renewable energy is uniquely poised to power marine carbon dioxide removal given its ability to provide carbon-free power at sea. In this work, the power requirements of marine carbon dioxide removal systems and the potential of marine renewable energy to power them are investigated, culminating in recommendations for future research and development to enable such developments.

marine renewable energy, carbon dioxide, climate c↗

Highly Insulated Wall Systems with Exterior Insulation of Polyisocyanurate under Different Facer Materials: Material Characterization and Long-Term Hygrothermal Performance Assessment

The application of exterior insulation in both new construction and retrofits is a common practice to enhance the energy efficiency of buildings. In addition to increased thermal performance, the rigid insulation can serve to keep the sheathing board warm and serve as a water-resistive barrier to keep moisture-related problems due to condensation and wind-driven rain. Polyisocyanurate (PIR) rigid boards have a higher thermal resistance in comparison to other commonly used exterior insulation boards. However, because of its perceived lower permeance, its use as exterior insulation is not very common. In this study, the hygrothermal property of PIR boards with different facer types and thicknesses is characterized. The material data obtained through experimental test and extrapolation is used in a long term hygrothermal performance assessment of a wood frame wall with PIR boards as exterior insulation. Results show that PIR with no facer has the smallest accumulated moisture on the sheathing board in comparison to other insulation boards. Walls with a bigger thickness of exterior insulation perform better when no vapor barrier is used. The PIR exterior insulation supports the moisture control strategy well in colder climates in perfect wall scenarios, where there is no air leakage and moisture intrusion. In cases where there is trapped moisture, the sheathing board has a higher moisture content with PIR boards with both aluminum or fiberglass type facers. An innovative facer material development for PIR boards can help efforts targeting improved energy-efficient and durable wall systems.

36 MATERIALS SCIENCE↗

Unforced decadal fluctuations in a coupled model of the atmosphere and ocean mixed layer

Global average temperature in a 100-year control run of a model used for greenhouse gas response simulations showed low-frequency natural variability comparable in magnitude to that observed over the last 100 years. The model variability was found to be barotropic in the atmosphere, and located in the tropical strip with largest values near the equator in the Pacific. The model variations were traced to complex, low-frequency interactions between the meridional sea surface temperature gradients in the eastern equatorial Pacific, clouds at both high and low levels, and features of the tropical atmospheric circulation. The variations in these and other model parameters appear to oscillate between two limiting climate states. The physical scenario accounting for the oscillations on decadal time scales is almost certainly not found in the real world on shorter time scales due to limited resolution and the omission of key physics (e.g., equatorial ocean dynamics) in the model. The real message is that models with dynamical limitations can still produce significant long-term variability. Only a thorough physical diagnosis of such simulations and comparisons with decadal-length data sets will allow one to decide if faith in the model results is, or is not, warranted.

Barnett, T. P.↗

Regional Warming from Aerosol Removal over the United States: Results from a Transient 2010-2050 Climate Simulation

We use a general circulation model (NASA Goddard Institute for Space Studies GCM 3) to investigate the regional climate response to removal of aerosols over the United States. We perform a pair of transient 2010e2050 climate simulations following a scenario of increasing greenhouse gas concentrations, with and without aerosols over the United States and with present-day aerosols elsewhere. We find that removing U.S. aerosol significantly enhances the warming from greenhouse gases in a spatial pattern that strongly correlates with that of the aerosol. Warming is nearly negligible outside the United States, but annual mean surface temperatures increase by 0.4e0.6 K in the eastern United States. Temperatures during summer heat waves in the Northeast rise by as much as 1e2 K due to aerosol removal, driven in part by positive feedbacks involving soil moisture and low cloud cover. Reducing U.S. aerosol sources to achieve air quality objectives could thus have significant unintended regional warming consequences.

Mickley, L. J.↗

Global Climate Impacts of Greenland and Antarctic Meltwater: A Comparative Study

Both the Greenland and Antarctic ice sheets have been melting at an accelerating rate over recent decades. Meltwater from Greenland might be expected to initiate a climate response which is distinct, and perhaps different from, that associated with Antarctic meltwater. Which one might elicit a greater climate response, and what mechanisms are involved? To explore these questions, we apply “Climate Response Functions (CRFs)” to guide a series of meltwater perturbation experiments using a fully-coupled climate model. In both hemispheres, meltwater drives atmospheric cooling, sea-ice expansion, and strengthened Hadley and Ferrel cells. Greenland meltwater induces a slowdown of the Atlantic Meridional Overturning Circulation (AMOC) and a cooling of the subsurface ocean in the northern high-latitudes. Antarctic meltwater, instead, induces a slowdown of the Antarctic Bottom Water formation and a warming of the subsurface ocean around Antarctica. For melt-rates up to 2000 Gt yr −1 , the climate response is rather linear. However, as melt-rates increase to 5000 Gt yr −1 , the climate response becomes non-linear. Due to a collapsed AMOC, the climate response is super-linear at high Greenland melt-rates. Instead, the climate response is sub-linear at high Antarctic melt-rates, due to the halting of the northward expansion of Antarctic sea ice by warm surface waters. Finally, in the linear limit, we use CRFs and linear convolution theory to make projections of important climate parameters in response to meltwater scenarios, which suggest that Antarctic meltwater will become a major driver of climate change, dominating that of Greenland meltwater, as the current century proceeds.

Greenland ice sheet↗

Fish Friendly Water Rules' Impact On the Power Grid with High VRE Levels

Columbia River basin multipurpose reservoirs are operated for hydropower production and many other purposes considering the aquatic habitat of the river basin. Specifically, the river basin fish population is a vital element for the tribal community of the river basin. When conventional thermal power plants are retired, hydropower flexibility balances the wind and solar variability of the power grid and provides grid services to maximize the high renewable power absorption. On the other hand, over-reliance on hydropower could harm the river basin fish habitat. For example, water release pulses during peak electricity demand hours and shorter-term water release variation could harm the fish population. Power grid planners, environmentalists, Columbia Basin tribes, hydro regulators, and water resource planners work together to understand the impacts of Columbia River basin operation in a fish-friendly way in the current power grid and power grid with higher renewable power share. We examine different levels of renewable share in the Western Interconnection to understand the multiple weather years and future climate projection and operating scenario impact on the power grid and water system. We measure power grid impacts for various water resources planning scenarios in terms of total system operating cost, system reliability indicators, changes in wind and solar generation and curtailments, local marginal prices, and revenue for hydropower producers. The study results inform reservoir operating rules decisions from hydropower power producers, system operators, other water users, tribes, environmentalists, and other stakeholders.

environmental↗

The Past and Future Changes in Climate of the Rice-Wheat Cropping Zone in Punjab, Pakistan

Agriculture is ranked top among Pakistan economic sectors vulnerable to the potential impacts of climate change. The agricultural production system is directly affected by weather inputs (temperature, solar radiation, and rainfall) that are projected to change in future (following increases in carbon dioxide and other greenhouse gasses). Although Climatic extremes such as drought, floods and heat waves, are expected to increase with detrimental consequences for agriculture and livestock production, yet changes in mean climates also pose challenges to sustainable development. This study presents climate change results for five districts within the major rice-wheat productivity zone of Punjab province in Pakistan. The results are focused on RCP8.5 mid-century (2040-2069) scenarios derived from five global climate models (GCMs) output and the Kharif (June-October) and Rabi (November-April) seasons. Analysis of recent historical weather data of Sialkot and Sheikhupura districts shows an increase in minimum temperatures and maximum temperatures and a large variation in rainfall. This temperature change and variability in rainfall are expected to enhance further as we approach 2050s. The mean maximum temperature is projected to increase by 2-2.5 ºC during the rice growing (Kharif) season and 2.4-2.7ºC during the wheat growing (Rabi) season. Rainfall during the rice growing season is more uncertain, with projections indicating an increase of 25%-35 % in the study region, while a minimal change is expected during the Rabi season. Climax of the rice growing season corresponds with the projected increase in monsoon intensity, leaving no doubt about the crop water demand satisfaction. However, a simultaneous increase in the day and night temperature may affect the growth and development of some critical phenological stages and thus could impact final yield.

Climate Change↗

The DeepMIP Contribution to PMIP4: Experimental Design for Model Simulations of the EECO, PETM, and pre-PETM (version 1.0)

Past warm periods provide an opportunity to evaluate climate models under extreme forcing scenarios, in particular high ( greater than 800 ppmv) atmospheric CO2 concentrations. Although a post hoc intercomparison of Eocene (approximately 50 Ma) climate model simulations and geological data has been carried out previously, models of past high-CO2 periods have never been evaluated in a consistent framework. Here, we present an experimental design for climate model simulations of three warm periods within the early Eocene and the latest Paleocene (the EECO, PETM, and pre-PETM). Together with the CMIP6 pre-industrial control and abrupt 4(times) CO2 simulations, and additional sensitivity studies, these form the first phase of DeepMIP - the Deep-time Model Intercomparison Project, itself a group within the wider Paleoclimate Modeling Intercomparison Project (PMIP). The experimental design specifies and provides guidance on boundary conditions associated with palaeogeography, greenhouse gases, astronomical configuration, solar constant, land surface processes, and aerosols. Initial conditions, simulation length, and output variables are also specified. Finally, we explain how the geological data sets, which will be used to evaluate the simulations, will be developed.

climate models↗

Is land use producing robust signals in future projections from Earth system models, all else being equal?

Abstract We use six Earth system models (ESMs) run under SSP3-7.0, a scenario characterized by a relatively large land use change (LUC) over the 21st century, and under a variant of the same scenario where a significantly different pattern of LUC, taken from SSP1-2.6, was used, all else being equal. Our goal is to identify changes in climate extremes between the two scenarios that are statistically significant and robust across the ESMs. The motivation for this study is to test a long-held assumption of the shared socio-economic pathway-representative concentration pathway (SSP-RCP) scenario framework: that the signal from LUC can be safely disregarded when pairing different SSPs to the compatible RCPs, where compatibility only considers global radiative forcing, predominantly determined by well-mixed greenhouse gasses emissions. We analyze extremes of daily minimum and maximum temperatures and precipitation, after fitting non-stationary generalized extreme value distributions in a way that borrows strength along the length of the simulation (2015–2100) and across initial condition ensembles. We consider changes in the 20 year return levels (RL20s) of these metrics by 2100, and focus on eight locations where LUC is large within each scenario, and strongly differs between scenarios, averaging the RL20s over a neighborhood characterized by the same LUC to enhance the signal to noise. We find that precipitation extremes do not show significant differences attributable to LUC differences. For temperature extremes (cold and hot) results are mixed, with some location-index combination showing significant results for some of the ESMs but not all, and not many coherent changes appearing for indices across regions, or regions across indices. These ESMs are representative of what is typically adopted as the source of climate information for impact studies, when the SSP-RCP framework is put to use. Overall, our analysis suggests that the hypothesis to pair SSPs to RCPs in a flexible fashion is overall defensible. However, the appearance of some coherence in a few locations and for some indices invites further investigation.

54 ENVIRONMENTAL SCIENCES↗

The Effect of Future Ambient Air Pollution on Human Premature Mortality to 2100 Using Output from the ACCMIP Model Ensemble

Ambient air pollution from ground-level ozone and fine particulate matter (PM(sub 2.5)) is associated with premature mortality. Future concentrations of these air pollutants will be driven by natural and anthropogenic emissions and by climate change. Using anthropogenic and biomass burning emissions projected in the four Representative Concentration Pathway scenarios (RCPs), the ACCMIP ensemble of chemistry climate models simulated future concentrations of ozone and PM(sub 2.5) at selected decades between 2000 and 2100. We use output from the ACCMIP ensemble, together with projections of future population and baseline mortality rates, to quantify the human premature mortality impacts of future ambient air pollution. Future air-pollution-related premature mortality in 2030, 2050 and 2100 is estimated for each scenario and for each model using a health impact function based on changes in concentrations of ozone and PM(sub 2.5) relative to 2000 and projected future population and baseline mortality rates. Additionally, the global mortality burden of ozone and PM(sub 2.5) in 2000 and each future period is estimated relative to 1850 concentrations, using present-day and future population and baseline mortality rates. The change in future ozone concentrations relative to 2000 is associated with excess global premature mortality in some scenarios/periods, particularly in RCP8.5 in 2100 (316 thousand deaths per year), likely driven by the large increase in methane emissions and by the net effect of climate change projected in this scenario, but it leads to considerable avoided premature mortality for the three other RCPs. However, the global mortality burden of ozone markedly increases from 382000 (121000 to 728000) deaths per year in 2000 to between 1.09 and 2.36 million deaths per year in 2100, across RCPs, mostly due to the effect of increases in population and baseline mortality rates. PM(sub 2.5) concentrations decrease relative to 2000 in all scenarios, due to projected reductions in emissions, and are associated with avoided premature mortality, particularly in 2100: between 2.39 and 1.31 million deaths per year for the four RCPs. The global mortality burden of PM(sub 2.5) is estimated to decrease from 1.70 (1.30 to 2.10) million deaths per year in 2000 to between 0.95 and 1.55 million deaths per year in 2100 for the four RCPs due to the combined effect of decreases in PM(sub 2.5) concentrations and changes in population and baseline mortality rates. Trends in future air-pollution-related mortality vary regionally across scenarios, reflecting assumptions for economic growth and air pollution control specific to each RCP and region. Mortality estimates differ among chemistry climate models due to differences in simulated pollutant concentrations, which is the greatest contributor to overall mortality uncertainty for most cases assessed here, supporting the use of model ensembles to characterize uncertainty. Increases in exposed population and baseline mortality rates of respiratory diseases magnify the impact on premature mortality of changes in future air pollutant concentrations and explain why the future global mortality burden of air pollution can exceed the current burden, even where air pollutant concentrations decrease.

Silva, Raquel A.↗