Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COPRECIPITATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Structural, magnetic and optical properties of ZnO nanostructures converted from ZnS nanoparticles

Graphical abstract: The phase conversion of ZnS to highly crystalline hexagonal ZnO was done by heat treatment. - Highlights: • Phase change of cubic ZnS to hexagonal ZnO via heat treatment. • Band gap was found to decrease with increasing calcinations temperature. • ZnO samples have higher magnetic moment than ZnS. • Blocking Temperature of the samples is well above room temperature. • Maximum negative%MR with saturation value ∼38% was found for sample calcined at 600° C. - Abstract: The present work concentrates on the synthesis of cubic ZnS and hexagonal ZnO semiconducting nanoparticle from same precursor via co-precipitation method. The phase conversion of ZnS to highly crystalline hexagonal ZnO was done by heat treatment. From the analysis of influence of calcination temperature on the structural, optical and vibrational properties of the samples, an optimum temperature was found for the total conversion of ZnS nanoparticles to ZnO. Role of quantum confinement due to finite size is evident from the blue shift of the fundamental absorption in UV–vis spectra only in the ZnS nanoparticles. The semiconducting nature of the prepared samples is confirmed from the UV–vis, PL study and transport study. From the magnetic and transport studies, pure ZnO phase was found to be more prone to magnetic field.

36 MATERIALS SCIENCE↗

Facile synthesis of high surface area nanostructured ceria-zirconia-yttria-lanthana solid solutions with the assistance of lauric acid and dodecylamine

Highlights: • High surface area nanostructured ceria-zirconia-yttria-lanthana solid solutions are synthesized by a facile method. • Hydrophobic surfaces are obtained with the addition of lauric acid and dodecylamine in the synthesis. • The introduced lauric acid and dodecylamine are chemically adsorbed onto the surface of materials through a coordination effect. • Excellent thermal stability are obtained in lauric acid and dodecylamine assisted materials. - Abstract: Co-precipitation combined with the assistance of lauric acid and dodecylamine was used to synthesize high surface area nanostructured ceria-zirconia-yttria-lanthana solid solutions (CZ-L and CZ-D). The promotion effects of lauric acid and dodecylamine were studied systematically by N{sub 2} adsorption-desorption, scanning electron microscopy (SEM), transmission electron microscopy (TEM), FT-IR and Raman analysis. After being thermal aged at 1100 °C for 4 h in air, CZ-L and CZ-D present high surface areas of 26 m{sup 2}/g and 16 m{sup 2}/g, respectively. The results indicate that the added lauric acid and dodecylamine are chemically adsorbed onto the surface of materials through coordination effect. The obtained hydrophobic surface could greatly decrease the amount of superficial adsorbed water on the material and significantly reduce the surface tension. The addition of lauric acid and dodecylamine could also effectively support the network structures of the material and resist the collapse of pores upon drying and calcination.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Preparation and optical properties of Bi2FeVMoO10 nanoparticles structurally derived from cation-substitutions in Scheelite-type BiVO4

Highlights: • Bi{sub 2}FeVMoO{sub 10} with Scheelite structure was synthesized by co-precipitation. • The structural Rietveld refinement was finished. • The nanoparticles (50–80 nm) show high absorption in UV-vis region (E{sub g} = 2.07 eV). • Photocatalysis of Bi{sub 2}FeVMoO{sub 10} was markedly enhanced than BiVO{sub 4} and Bi{sub 2}Mo{sub 3}O{sub 12}. • The mechanism of this photocatalysis system was proposed. - Abstract: Bi{sub 2}FeVMoO{sub 10} [(Bi{sub 0.8}Fe{sub 0.4})(Mo{sub 0.4}V{sub 0.4})O{sub 4}] was prepared via facile co-precipitation route. It has a tetragonal Scheelite structure derived by cation substitutions in monoclinic BiVO{sub 4}. Rietveld refinements of Bi{sub 2}FeVMoO{sub 10} were performed in body-centered tetragonal Scheelite. The morphological property was tested via SEM, EDX, and TEM measurements. The optical property was measured by UV-vis absorption spectrum. Bi{sub 2}FeVMoO{sub 10} shows a narrower band gap of 2.07 eV than the monoclinic BiVO{sub 4} and α-Bi{sub 2}Mo{sub 3}O{sub 12}. The photo-degradation experiments of Rhodamine-B (RhB) dye solutions were conducted. Bi{sub 2}FeVMoO{sub 10} nanoparticles have more efficient photocatalytic ability on RhB degradation than that of BiVO{sub 4} and α-Bi{sub 2}Mo{sub 3}O{sub 12}. The results were discussed on the Scheelite structure characteristics such as complicated optical absorption centers, loose space in the lattice because of the vacancies, large dispersion in the CB and VB electronic components and the Fe{sup 3+}/Fe{sup 2+} redox couples. This multicomponent Scheelite oxide could have potential applications in environment protection.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis of low core loss Finemet/Ni0.5Zn0.5Fe2O4 composites by co-precipitation method

Highlights: • Finemet/NiZn ferrite composites were synthesized by co-precipitation method. • Magnetic properties can be adjusted by controlling oxygen partial pressure. • It shows lower core loss about 30.5 mW/cm{sup 3} at 100 kHz and 100 mT. - Abstract: Finemet/Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} core/shell structure composites have been prepared by a co-precipitation method followed by a high temperature sintering process. The formation mechanism of the core/shell structures and the effects of oxygen partial pressure during the sintering process on the phase structure, microstructure, and magnetic properties were discussed. Low and high oxygen partial pressures resulted in the formation of crystal defects and a reduction of the magnetic properties of the composites. The magnetic properties could be adjusted by controlling the oxygen partial pressure and the optimal magnetic properties of the composites were obtained by sintering under an oxygen partial pressure of 10%. The resulting composite exhibited a high permeability of 61, a high saturation magnetization of 135.5 emu/g and a low core loss of approximately 30.5 mW/cm{sup 3} at 100 kHz and 100 mT.

36 MATERIALS SCIENCE↗

Investigation on zinc substituted highly porous improved catalytic activity of NiFe2O4 nanocrystal by co-precipitation method

Highlights: • A thriftily viable co-precipitation technique has been used to synthesize Zn substituted NiFe{sub 2}O{sub 4} nanoparticles. • An essential structural, optical and magnetic property has been investigated. • Augmentation of Photo-Fenton activity after increasing the zinc concentration has been observed and deliberated. • Strong dependence of photo-fenton activity and cumulative increase degradation efficiency. - Abstract: Connecting to various applications of nickel ferrite as a ceramic magnetic nanocomposite in diverse manufacturing and technical categories, it is essential to optimize its optical, magnetic and microstructural characteristics. Hence a facile route was developed to fabricate nickel zinc ferrite (Ni{sub 1-x}Zn{sub x}Fe{sub 2}O{sub 4}) nanocomposites by co-precipitation route. The enviable spinel phase was studied by X-ray diffractometer and the crystallite size was found to vary from 8 to 15 nm. By Transmission Electron Microscopy, the micro structural and speck distribution was found in the range of 5–12.5 nm. Surface characterization was done using the isothermal BET technique which presents a high surface area that is exhibited by synthesized nanoparticles. Using Kubelka-Munk plot, bandgap was found to be decreasing with the increase of Zn concentration.The synthesized Ni{sub 1-x}Zn{sub x}Fe{sub 2}O{sub 4} was studied for its application in photo-Fenton degradation of organic Methylene blue (MB) dye. The synthesized nanocatalyst can bereused further which makes itself a proficient candidate in industrial effluent degradation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis and characterization of methyl esters from non-edible plant species yellow oleander oil, using magnesium oxide (MgO) nano-catalyst

Highlights: • Introduction of new non-edible oil source for bioenergy industry. • Nano-particles MgO used as a heterogeneous catalyst. • Maximum conversion yield at optimum level achieved 93.1%. • Fuel properties were matched and found similar to ASTM standards. - Abstract: Synthesis and characterization of methyl esters from non-edible oil sources provide a distinctive and sustainable approach towards sustainable energy and the cleaner environment, in general. This study aims the synthesis of methyl esters from non-edible plant species yellow oleander seeds oil. The transesterification process was carried for the synthesis of methyl esters, using heterogeneous nano-catalyst magnesium oxide (MgO). A well known co-precipitation method was used for the synthesis of MgO nano-catalyst. The application of MgO nano-catalyst showed the maximum conversion (93.1%) of triacylglycerols to methyl esters. Different parameters affecting the conversion percentage; alcohol to oil molar ratio, temperature and catalyst concentrations were checked and optimized, accordingly. The optimum conditions for the maximum conversion noted; 1:5 oil to methanol molar ratio at 90 °C, using 0.2% (w/w) MgO nano-catalyst. The various analytical techniques; XRD, SEM-EDX and TEM-EDS spectroscopes were used to check out the nano-particle morphology and crystalline size, accordingly while, the FTIR, GC–MS & NMR were used to quantify and determine the structural measurements of synthesized methyl esters. The fuel properties of oleander methyl esters papered sample were checked, compared and found within accordance to the ASTM standards.

09 BIOMASS FUELS↗

Room temperature magnetic ordering and analysis by bound magnetic polaron model of Yb3+ doped nanocrystalline zinc oxide (Zn0.98Yb0.02O)

Highlights: • ZnO and Yb doped ZnO are synthesized by co-precipitation method. • Rietvelt anlysis of XRD patterns confirms the complete substitution of Yb{sup 3+} in ZnO. • Vacancy and defect mediated RTFM is introduced in doped ZnO. • BMP model successfully analyze the magnetic property of Zn{sub 0.98}Yb{sub 0.02}O. - Abstract: Nanocrystalline ZnO and Yb-doped ZnO (Zn{sub 0.98}Yb{sub 0.02}O) are prepared by simple co-precipitation method. The pure crystallographic phases of ZnO and Zn{sub 0.98}Yb{sub 0.02}O are confirmed by Rietveld analyses of XRD patterns. Raman and photoluminescence spectra recorded at room temperature (RT) indicates that lattice defects and oxygen vacancy in Zn{sub 0.98}Yb{sub 0.02}O is more than that of ZnO. Magnetic measurements of ZnO and Zn{sub 0.98}Yb{sub 0.02}O are carried out from 300 to 5 K. Ferromagnetic ordering is observed in Zn{sub 0.98}Yb{sub 0.02}O at RT and the strength of the ordering increases with the lowering of temperature. Ferromagnetism of Zn{sub 0.98}Yb{sub 0.02}O is attributed to the oxygen vacancy introduced by annealing in vacuum. Magnetization vs. temperature curve is well fitted by the combination of 3D spin wave and Curie-Weiss law, which suggest simultaneous presence of para- and ferro-magnetic phases in Zn{sub 0.98}Yb{sub 0.02}O. Ferromagnetic ordering is successfully explained by vacancy mediated bound-magnetic polaron model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hydrothermal synthesis of bismuth niobates and their application in azo-dyes photo-discoloration

Highlights: • A new method of synthesis for obtaining pure phase bismuth niobates is proposed. • α-BiNbO{sub 4} and β-BiNbO{sub 4} were obtained by the calcination of an amorphous precursor. • Nanosized bismuth niobates have shown high band gap energies (3.2–3.4 eV). • Bismuth niobates are very efficient in the photo-discoloration of methyl orange. - Abstract: Bismuth niobates were obtained by hydrothermal synthesis using bismuth (III) nitrate pentahydrate [Bi(NO{sub 3}){sub 3}·5H{sub 2}O] and a Lindqvist potassium hexaniobate [K{sub 8-x}H{sub x}Nb{sub 6}O{sub 19}.nH{sub 2}O] as soluble precursors. Pure crystalline Bi{sub 5}Nb{sub 3}O{sub 15}, β-BiNbO{sub 4} and α- BiNbO{sub 4} were obtained as pure phases through co-precipitation at pH = 8, followed by hydrothermal treatment and calcination at 600, 700 or 800 °C, respectively, which are milder temperatures than those used in solid state, citrate sol-gel and ball milling methods. Band gap energies of α-BiNbO{sub 4} and β-BiNbO{sub 4} were estimated by UV–vis diffuse reflectance spectroscopy (DRS) as 3.2–3.4 eV, which are higher than experimental values reported in the literature. The materials were evaluated in the methyl orange azo-dye photo-discoloration under UV irradiation and complete bleach was attained. The triclinic phase presented a better efficiency as a photocatalyst than the orthorhombic phase. Unexpectedly, the mixture of both phases resulted in the highest photocatalytic efficiency, similar to that found for Degussa P25 commercial catalyst.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nanoparticles-constructed spinel ZnFe2O4 anode material with superior lithium storage performance boosted by pseudocapacitance

Highlights: • Nanoparticles-constructed ZnFe{sub 2}O{sub 4} was fabricated by co-precipitation method. • The ZnFe{sub 2}O{sub 4} sample shows excellent high rate capability and cycling stability. • The lithium storage mechanism was analyzed by CV and EIS measurements. • Pseudocapacitive effect has a significant contribution to the total stored charge. - Abstract: The practical application of ZnFe{sub 2}O{sub 4} in lithium ion batteries (LIBs) is severely hampered by its fast capacity fading and poor rate performance. To overcome these issues, herein, ZnFe{sub 2}O{sub 4} powders consist of aggregated nanoparticles (50∼100 nm) with porosity were prepared by a facile co-precipitation method and subsequent thermal decomposition. When used as anode material for LIBs, the ZnFe{sub 2}O{sub 4} sample delivers capacities of 920, 820, 650, 485, and 421 mA h g{sup −1} at current densities of 0.5, 1, 3, 7, and 10 A g{sup −1}, respectively. Moreover, the sample can maintain a capacity of 814 mA h g{sup −1} even after 300 cycles at the current density of 1 A g{sup −1}, implying an excellent rate capability and cycling stability. Cyclic voltammetry analysis reveals that both diffusion-controlled lithium storage and surface pseudocapacitive lithium storage contribute to the total stored charge of ZnFe{sub 2}O{sub 4}, which boosts the high rate capability and superior cycling stability of the ZnFe{sub 2}O{sub 4}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Water-dispersible and quasi-superparamagnetic magnetite nanoparticles prepared in a weakly basic solution at the low synthetic temperature

Highlights: • Magnetite nanoparticles were prepared in a weakly basic solution at the low reaction temperature. • The double layer may be steadily formed on the surfaces of magnetite nanoparticles at the high pH value. • Magnetite nanoparticles present a quasi-superparamagnetic property and a good dispersion in the aqueous solution. - Abstract: Magnetite nanoparticles were prepared in a weakly basic solution at the low reaction temperature by the co-precipitation method. As a comparison, the oxidative precipitation method was also applied in this study. The structure, morphology, and other properties of the obtained samples were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), transmission electron microscope (TEM), and thermogravimetric analysis (TGA). The above characterization data indicate that small size and narrow size distribution are found for magnetite nanoparticles prepared by the co-precipitation method. Further magnetic property and Zeta potential results illuminate that magnetite nanoparticles prepared by this method display a quasi-superparamagnetic property and a good dispersion in the aqueous solution. Based on the investigation results, the magnetite nanoparticles with a quasi-superparamagnetic property and a fine dispersion can be facilely prepared in a weakly basic solution at the low reaction temperature by the co-precipitation method.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Physical and photoelectrochemical characterizations of hematite {alpha}-Fe{sub 2}O{sub 3}: Application to photocatalytic oxygen evolution

The physical properties and photoelectrochemical characterization of {alpha}-Fe{sub 2}O{sub 3}, synthesized by co-precipitation, have been investigated in regard to solar energy conversion. The optical gap is found to be 1.94 eV and the transition is indirectly allowed. The chemical analysis reveals an oxygen deficiency and the oxide exhibits n-type conductivity, confirmed by a negative thermopower. The plot log {sigma} vs 1/T shows linearity in the range (400-670 K) with the donor levels at 0.14 eV below the conduction band and a break at {proportional_to}590 K, attributed to the ionization of the donors. The conduction occurs by small polaron hopping through mixed valences Fe{sup 2+/3+} with an electron mobility {mu}{sub 400} {sub K} of 10{sup -3} V cm{sup 2} s{sup -1}. {alpha}-Fe{sub 2}O{sub 3} exhibits long term chemical stability in neutral solution and has been characterized photoelectrochemically to assess its activity as bias-free O{sub 2}-photoanode. The flat band potential V{sub fb} (-0.45V{sub SCE}) and the electron density N{sub D} (1.63 x 10{sup 18} cm{sup -3}) were determined, respectively, by extrapolating the linear part to C{sup -2} = 0 and the slope of the Mott Schottky plot. At pH 6.5, the valence band (+1.35V{sub SCE}) is suitably positioned with respect to the O{sub 2}/H{sub 2}O level (+0.62 V) and {alpha}-Fe{sub 2}O{sub 3} has been evaluated for the chemical energy storage through the photocatalytic reaction: (2SO{sub 3}{sup 2-}+2 H{sup +}{yields} S{sub 2} O{sub 3}{sup 2-}+ O{sub 2}+ H{sub 2} O, {delta}G = 213.36 kJ mol{sup -1}). The best photoactivity occurs in SO{sub 3}{sup 2-} solution (0.025 M, pH 8) with an oxygen rate evolution of 7.8 cm{sup 3} (g catalyst){sup -1} h{sup -1}. (author)

14 SOLAR ENERGY↗

Direct interaction of cellular hnRNP-F and NS1 of influenza A virus accelerates viral replication by modulation of viral transcriptional activity and host gene expression

To investigate novel NS1-interacting proteins, we conducted a yeast two-hybrid analysis, followed by co-immunoprecipitation assays. We identified heterogeneous nuclear ribonucleoprotein F (hnRNP-F) as a cellular protein interacting with NS1 during influenza A virus infection. Co-precipitation assays suggest that interaction between hnRNP-F and NS1 is a common and direct event among human or avian influenza viruses. NS1 and hnRNP-F co-localize in the nucleus of host cells, and the RNA-binding domain of NS1 directly interacts with the GY-rich region of hnRNP-F determined by GST pull-down assays with truncated proteins. Importantly, hnRNP-F expression levels in host cells indicate regulatory role on virus replication. hnRNP-F depletion by small interfering RNA (siRNA) shows 10- to 100-fold increases in virus titers corresponding to enhanced viral RNA polymerase activity. Our results delineate novel mechanism of action by which NS1 accelerates influenza virus replication by modulating normal cellular mRNA processes through direct interaction with cellular hnRNP-F protein.

60 APPLIED LIFE SCIENCES↗

Recovery of yttrium from cathode ray tubes and lamps’ fluorescent powders: experimental results and economic simulation

Highlights: • Fluorescent powder of lamps. • Fluorescent powder of cathode ray rubes. • Recovery of yttrium from fluorescent powders. • Economic simulation for the processes to recover yttrium from WEEE. - Abstract: In this paper, yttrium recovery from fluorescent powder of lamps and cathode ray tubes (CRTs) is described. The process for treating these materials includes the following: (a) acid leaching, (b) purification of the leach liquors using sodium hydroxide and sodium sulfide, (c) precipitation of yttrium using oxalic acid, and (d) calcinations of oxalates for production of yttrium oxides. Experimental results have shown that process conditions necessary to purify the solutions and recover yttrium strongly depend on composition of the leach liquor, in other words, whether the powder comes from treatment of CRTs or lamp. In the optimal experimental conditions, the recoveries of yttrium oxide are about 95%, 55%, and 65% for CRT, lamps, and CRT/lamp mixture (called MIX) powders, respectively. The lower yields obtained during treatments of MIX and lamp powders are probably due to the co-precipitation of yttrium together with other metals contained in the lamps powder only. Yttrium loss can be reduced to minimum changing the experimental conditions with respect to the case of the CRT process. In any case, the purity of final products from CRT, lamps, and MIX is greater than 95%. Moreover, the possibility to treat simultaneously both CRT and lamp powders is very important and interesting from an industrial point of view since it could be possible to run a single plant treating fluorescent powder coming from two different electronic wastes.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Lithium recycling and cathode material regeneration from acid leach liquor of spent lithium-ion battery via facile co-extraction and co-precipitation processes

Highlights: • A novel process for combining Li and cathode material recycling is developed. • Ni, Co and Mn are co-extracted and separated with Li. • Li recovered as Li{sub 2}CO{sub 3} with the purity of 99.2% is achieved. • The spherical cathode material LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2} is directly regenerated. - Abstract: A novel process for extracting transition metals, recovering lithium and regenerating cathode materials based on facile co-extraction and co-precipitation processes has been developed. 100% manganese, 99% cobalt and 85% nickel are co-extracted and separated from lithium by D2EHPA in kerosene. Then, Li is recovered from the raffinate as Li{sub 2}CO{sub 3} with the purity of 99.2% by precipitation method. Finally, organic load phase is stripped with 0.5 M H{sub 2}SO{sub 4}, and the cathode material LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2} is directly regenerated from stripping liquor without separating metal individually by co-precipitation method. The regenerative cathode material LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2} is miro spherical morphology without any impurities, which can meet with LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2} production standard of China and exhibits good electrochemical performance. Moreover, a waste battery management model is introduced to guarantee the material supply for spent battery recycling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High Performance Cathode Recovery from Different Electric Vehicle Recycling Streams

For environmental and sustainability reasons, spent Li-ion batteries must be recovered and recycled so that the full promise of an electrified future is realized. Li-ion battery recycling streams pose a serious challenge to all existing recycling technologies due to their unknown and diverse chemistry. In this work, four representative recycling streams were used to demonstrate the flexibility of the recycling process developed at Worcester Polytechnic Institute (WPI) to accommodate a variable feed and generate consistent quality cathode material, LiNi 1/3 Mn 1/3 Co 1/3 O 2 (NMC111). Ni 1/3 Mn 1/3 CO 1/3( OH) 2 precursors derived from four recycling streams were produced by a hydroxide co-precipitation method in a continuous stirred tank reactor. It took two days for the co-precipitation reaction to reach steady state. A possible evolution of the precursor particles up to the steady state was proposed. Both the precursors and cathodes from these four different recycling streams exhibit similar morphology, particle size distribution, and tap density. Moreover, these recovered cathode materials display similar electrochemical properties. Surprisingly these recovered NMC111s have better rate capability than a commercial NMC111 prepared from virgin materials. The different chemical compositions of the incoming recycling streams were shown to have little observed effect on the recovered precursor and resultant cathode material generated by the WPI-developed recycling process with advantages including no sorting, low temperature, and high quality recovered battery materials. Therefore, the WPI-developed process applies to different spent Li-ion battery waste streams and is therefore general.

25 ENERGY STORAGE↗

Immobilization of 99-Technetium (VII) by Fe(II)-Goethite and Limited Reoxidation

During the nuclear waste vitrification process volatilized {sup 99}Tc will be trapped by melter off-gas scrubbers and then washed out into caustic solutions, and plans are currently being contemplated for the disposal of such secondary waste. Solutions containing pertechnetate [{sup 99}Tc(VII)O{sub 4}{sup -}] were mixed with precipitating goethite and dissolved Fe(II) to determine if an iron (oxy)hydroxide-based waste form can reduce Tc(VII) and isolate Tc(IV) from oxygen. The results of these experiments demonstrate that Fe(II) with goethite efficiently catalyzes the reduction of technetium in deionized water and complex solutions that mimic the chemical composition of caustic waste scrubber media. Identification of the phases, goethite + magnetite, was performed using XRD, SEM and TEM methods. Analyses of the Tc-bearing solid products by XAFS indicate that all of the Tc(VII) was reduced to Tc(IV) and that the latter is incorporated into goethite or magnetite as octahedral Tc(IV). Batch dissolution experiments, conducted under ambient oxidizing conditions for more than 180 days, demonstrated a very limited release of Tc to solution (2-7 {micro}g Tc/g solid). Incorporation of Tc(IV) into the goethite lattice thus provides significant advantages for limiting reoxidation and curtailing release of Tc disposed in nuclear waste repositories.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Uranium Extraction From Laboratory Synthesized, Uranium-Doped Hydrous Ferric Oxides

The extractability of uranium (U) from synthetic hydrous ferric oxides has been shown to decrease as a function of mineral ripening, consistent with the hypothesis that the ripening process decrease contaminant lability. To evaluate this process, three hydrous ferric oxide (HFO) suspensions were co-precipitated with uranyl (UO22+) and maintained at pH 7.0 ± 0.1. Uranyl was added to the HFO post-precipitation in a fourth suspension. Two suspensions also contained either co-precipitated silicate (Si-U-HFO) or phosphate (P-U-HFO). After precipitation of the HFOs, at time intervals of one week, one month, six months, one year, and 2 years, aliquots of the suspensions were contacted with five solutions for a range of time. The extracts were analyzed for U and iron (Fe). The results are consistent with the hypothesis that U and Fe extractability will decrease as the mineral phase ripens. All extracting solutions exhibited some degree of selectivity for U, as the proportional extraction of U exceeded that for congruent dissolution. Micro X-ray diffraction analysis indicates the transformation from an amorphous phase to a material containing substantial proportions of crystalline goethite and hematite, except the P-U-HFO which remained primarily amorphous. Further analysis of the co-precipitates by the Mössbauer technique and scanning electron microscopy (SEM) provides further evidence of mineralogic ripening

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗