Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COPPER OXIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Fabrication and Characterization of Aligned YBa{sub 2}Cu{sub 3}O{sub 7 − δ} Superconductor Electrospun Nanofibers and Twisted Yarn Based on PVA

YBa{sub 2}Cu{sub 3}O{sub 7 − δ} (YBCO) superconducting twisted yarns from electrospun aligned nanofibers are produced with a critical transition temperature of T{sub c} = 92 K. A solution of PVA and Y–Ba–Cu acetates are used as a precursor in the electrospinning to prepare aligned nanofibers and twisted yarns. The aligned nanofibers and twisted yarns are then pyrolysed to remove PVA and sintered to obtain a superconducting phase. Finally, before and after sintering, the aligned nanofibers and twisted yarns are studied by SEM, XRD, and AC magnetic susceptibility techniques. Results are presented in this paper.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Manufacture and Tests of a Bi2223/YBCO Coil for a 1-MJ/0.5-MVA Fault Current Limiter-Magnetic Energy Storage System

With the increasing of wind energy, it is necessary to develop an energy storage system to level the wave of wind power, and to develop a fault current limiter for improvement of the LVRT capability of the wind farm. An innovative idea to deal with the above problem is to develop a superconducting fault current limiter-magnetic energy storage system (SFCL-MES). In this paper, we report the progress of the superconducting coil for a 1-MJ/0.5-MVA FCL-SMES system. The coil consisted of 46 double pancakes, in which 8 pancakes were made of YBCO tapes and the others were made of Bi2223 tapes; the inductance of the coil was 13.3 H, and its rated current was 388 A while the maximum magnetic field was 3.5 T. This coil had been used for a FCL-SMES system, which was installed and tested at a wind farm connected to the live power grid.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic and Thermal Design of HTS Quadrupole Magnet for Newly Developed Superconducting Proton Cyclotron Beam Line

A magnetic and thermal design of high-temperature superconducting (HTS) quadrupole magnet for newly developed superconducting proton cyclotron was presented in this research. With superconducting technology, the design can reduce the magnet size and remove the heat loads more efficiently. Calculations are conducted with finite element method (FEM) to study the quadrupole magnet’s magnetic and thermal properties. For the magnet cold-mass and cryostat system, the heat load is mainly generated by conduction and radiation. Multilayer thermal insulation and G10 supports are used to restrict them. The magnetic field distribution in the HTS coils is calculated to consider the critical current degradation of the YBCO tapes. The effects on the field gradient quality in relation to the pole tip profile and end chamfer are analyzed. The sixth multipole component in the integral field can be improved with end chamfer. Finally, a 20 T/m HTS quadrupole magnet with integral field uniformity less than 0.05% out to 75% of the inscribed radius is proposed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Effects of Ferromagnetic Disks on AC Losses in HTS Pancake Coils with Nonmagnetic and Magnetic Substrates

Performance improvement of high-temperature superconducting (HTS) pancake coil is of paramount importance for its application in electrical facilities. In this paper, the utilization of ferromagnetic disks including weak magnetic material and strong magnetic material is investigated through numerical simulations for the aim of reducing the AC loss. Both the nonmagnetic and magnetic substrates are considered for the rare-earth-barium-copper-oxide coated conductor tapes wounded into the pancake coil. In order to analyze the influences of ferromagnetic disks on the maximum allowable currents and AC losses of nonmagnetic substrate-based coil and magnetic substrate-based coil, a self-consistent model based on the A-formulation is adopted to calculate the critical current and a 2D axisymmetric model built on the H-formulations is established to calculate the AC loss. According to the simulation results, it is found that ferromagnetic disks especially the strong magnetic disk are slightly detrimental to the critical currents of the pancake coils. Nevertheless, the presence of large background field weakens the effects of ferromagnetic disks. The simulation results also indicate that strong magnetic disks achieve about 50% reduction of the AC loss in the nonmagnetic substrate-based coil, and the AC loss of the magnetic substrate-based coil can be increased or reduced with strong magnetic disks depending on the applied current amplitude. The utilization of strong magnetic disks leads to the enhancement of the AC loss in the magnetic substrate-based coil at lower current and to the reduction of it at larger current.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Effect of Termination Resistances on the Quench and Mechanical Response in High-Temperature Superconducting Cables

The termination resistance can lead to the nonuniform distributions of current in the superconducting cable, which has an obvious effect on the quench characteristics. In order to study the quench in the infinitely long stacked-tape YBCO cable, a simplified two-dimensional (2D) model is established. By considering the termination resistances, the coupled heat conduction equation and the Maxwell’s equations are solved to calculate the evolution of current and temperature with time, where E-J constitutive law and Ohm’s law are used for the superconducting layer and other layers in the tape. Then, a 2D solid mechanical model is built to analyse the strain and stress during the quench. When the pulsed heat source is applied on the cable, it can be found that the termination resistance will affect the sequence of the quench of tapes in the cable. Meanwhile, the sequence and time of the quench are influenced by transport current and the locations of heat source. The distribution of the Von Mises stress is similar to the temperature, and the termination resistances have little effect on the mechanical behaviors. The strain rate has an inflection point when the temperature is more than the critical temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Radiative Transfer, Non-transparency, Stability Against Quench in Superconductors and Their Correlations

Radiative transfer calculations are presented for multi-filamentary BSCCO 2212 and 2223 and for thin film-coated YBaCuO 123 superconductors. A strictly radiative view allows conductor morphology of these superconductors to be interpreted as particulate or quasi-particulate objects. Problems then arising from non-regular particle shape, missing refractive indices, dependent scattering and superconductor material (diamagnetic) properties are solved in a multi-step, approximation approach. Both types of conductors are shown to be non-transparent to mid-IR radiation. Non-transparency may become critical for superconductor stability. The obtained extinction cross sections converge near the phase transition. A substantial difference of extinction properties between the superconducting and normal conducting state thus cannot be observed. As a first corollary from non-transparency, application of the additive approximation for the total thermal conductivity used in previous numerical calculations of the BSCCO and YBaCuO superconductors is confirmed. Second, within transit time intervals, the length of which depends on optical thickness, no uniform equilibrium conditions of electron pair density within the conductor cross section and near critical temperature are observed. Phase transition does not proceed uniformly, neither spatial nor temporal, and the order (succession on time scales) of local events (temperature variations, quench), in extreme cases, is completely dissolved. As another corollary, non-transparency even makes the existence of uniquely defined, physical time scales doubtful in a superconductor. The obtained results are expected to improve existing stability models and will be of practical value for future materials development.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Trapped Field and Levitation Performance of a YBCO Superconductor Magnetized in Different External Magnetic Fields

In order to find a relative preferable method to improve the trapped magnetic field (B{sub trap}) of a YBCO superconductor, the influences of field-cooling height (FCH), magnetization intensity, and magnetization process on the trapped fields of the high temperature superconductor (HTS) magnetized in the magnetic fields of the permanent magnet guideway (PMG) and the superconducting magnet (SM) were both studied. In addition, the levitation forces of the bulk magnetized in the two different magnetic fields were also investigated in this paper. The experimental results showed that the maximum trapped field ratio (δ{sub trap}) of the bulk magnetized above the PMG attained the largest value, when the initial FCH was 30 mm. The remagnetization process was a preferable method to increase the B{sub trap}, in the case that the FCH was higher than 30 mm. When the exciting current (I{sub e}) of the SM was smaller than 15 A, the remagnetization process was an effective method to improve the B{sub trap}. The remagnetization performance of the bulk attained the saturation, under the condition that the I{sub e} was larger than 15 A. In the aspect of the levitation performance, it can be found that the decreasing amplitude of the force with the B{sub trap} became larger, when the levitation gap was lower. The force acted on the bulk increased with increasing the magnetic fields of the SM. Moreover, the results also indicated that the initial B{sub trap} was larger; the maximum levitation force (F{sub lmax}) became smaller. The magnetic hysteresis of the bulk was found to decrease with increasing the B{sub trap.}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterizing the Distribution of Microwave Surface Resistance of HTS Film Based on Metal Ring

This paper presents a novel method for measuring the microwave surface resistance distribution of high-temperature superconducting thin films by a dielectric resonator with a metal ring. After calibration, the effect of metal ring loss on measurement accuracy is negligible. The measurement resolution is determined by the internal diameter of the metal ring, which makes the design of the device more flexible. Therefore, measurement with high resolution and convenience can be achieved simultaneously by using a metal ring with proper size and operating at a relatively low frequency. A test device working at 32 GHz with TE{sub 01(1 + δ)} mode was developed. Its resolution is a circular area with a diameter of 5 mm and an area of 19.6 mm{sup 2}. The unloaded quality factor of the test device is more than 140,000, when it is loaded by the calibration cavity. The test device has a relative uncertainty of less than 6%, which complies with the uncertainty (20%) specified by the international standard for the microwave surface resistance measurement of high-temperature superconducting (HTS) thin film. The surface resistance distribution of a 2-in. YBCO/LAO/YBCO superconducting film sample was measured by this test device.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth and Nanofabrication of All-Perovskite Superconducting/Ferromagnetic/Superconducting Junctions

We fabricate and study experimentally all-perovskite-oxide superconductor/ferromagnetic insulator/superconductor (S/FI/S) tunnel junctions made out of the high-temperature cuprate superconductor YBa{sub 2}Cu{sub 3}O{sub 7−y} (YBCO) and the colossal magnetoresistive manganite LaMnO{sub 3} (LMO) in the ferromagnetic insulator state. YBCO/LMO/YBCO heterostructures with different LMO thicknesses (5, 10, and 20 nm) are grown epitaxially via pulsed laser deposition. Nanoscale S/FI/S junctions with sizes down to 300 nm are made by three-dimensional nano-sculpturing with focused ion beam. Junctions with a thick (20 nm) LMO barrier exhibit a large negative magnetoresistance below T{sub Curie}∼160 K, typical for colossal magnetoresistive manganites, as well as a kink in the current-voltage characteristics at large bias (V∼1–2 Volts), attributed to Zener-type tunneling. However, they do not show a measurable Josephson current. On the contrary, junctions with the thinnest 5-nm LMO barrier exhibit a large supercurrent and no signs of magnetism. The latter may indicate the presence of pinholes due to thickness inhomogeneity and/or a ∼ 2 nm dead magnetic layer at the YBCO / LMO interface caused, e.g., by interdiffusion or strain. The junction with an intermediate 10-nm LMO barrier exhibited a desired S/FI/S junction behavior with significant negative magnetoresistance and signatures of a small Josephson current.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetoresistance Hysteresis Evolution in the Granular Y–Ba–Cu–O High-Temperature Superconductor in a Wide Temperature Range

The temperature evolution of the magnetoresistance hysteresis in the granular YBa{sub 2}Cu{sub 3}O{sub 7-δ} high-temperature (T{sub C} ≈ 92 K) superconductor has been investigated. The measurements have been performed in the high-temperature region (78–90 K) and at the liquid helium temperature (4.2 K). The results obtained have been analyzed using the developed model of the behavior of transport properties of a granular high-temperature superconductor in an external magnetic field. Within the discussed model, the dissipation of the grain boundary subsystem is determined by the intergrain spacing-averaged effective field B{sub eff}, which is a superposition of external field H and the field induced by the magnetic moments of superconducting grains. Such a consideration yields the expression B{sub eff}(H) = H − 4πM(H) α for the effective field in the intergrain medium, where M(H) is the experimental hysteretic dependence of magnetization and α is the parameter of magnetic flux crowding in the intergrain medium. Here, the magnetoresistance is assumed to be proportional to the absolute value of the effective field: R(H) ~ |B{sub eff}(H)|. Analysis of the experimental R(H) and M(H) dependences obtained under the same conditions for the investigated high-temperature superconductor sample showed that in the high-temperature region this parameter is α ≈ 25. At the low temperature (4.2 K), we may state that the degree of flux crowding increases and the estimated α value is ~ 50. The estimates made are indicative of the strong effect of flux compression in the intergrain medium on the magnetotransport properties of the investigated granular high-temperature superconductor system. Possible reasons for a discrepancy between the developed model concepts and experimentally observed low-temperature R(H) hysteresis are analyzed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Effect of Zinc on the Structural, Electrical, and Mechanical Properties of YBCO-123 Superconducting Nanoparticles Prepared by an Acetate-Based Sol-Gel Process

In this study, zinc (Zn)-doped YBaCuO (YBCO)-123-based high-temperature superconducting samples were produced using the sol-gel method, which is commonly used for preparing nanosize materials. Zn ions were substituted by Cu ions (YBa{sub 2}Cu{sub 3-x}Zn{sub x}O), and Zn doping effects on structural, electrical, and mechanical properties of the YBCO-123 superconductors were examined in detail. Undoped sample was prepared under same conditions. X-ray diffraction analysis (XRD) was used to determine phase analysis and lattice parameters of the superconducting samples. To analyze the microstructure properties, scanning electron microscope (SEM) measurements were performed. Resistivity and microhardness measurements were also carried out for superconducting and mechanic properties, respectively. Vickers microhardness, young modulus, fracture toughness, and yield strength values of the samples were calculated. Microhardness measurements were analyzed using the Kick’s law, proportional sample resistance (PSR) model, EPD model, the Hays-Kendall (HK) approach, and indentation-induced cracking (IIC) model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Friction and Wear of Nanoadditive-Based Biolubricants in Steel–Steel Sliding Contacts: A Comparative Study

The present work deals with the study of tribo-pair interaction in lubricated sliding contacts. By considering the environmental issues, the sunflower oil was extracted from the sunflower seeds and used as a base lubricant. The two types of the nanoadditives, i.e., CuO and CeO{sub 2}, varying concentrations from 0.10 to 0.50% w/v were used to formulate the nanolubricants. The compatibility/synergism of the nanoadditives was examined from antifriction and antiwear behavior study with four-ball tester. Also, sunflower oil was modified by the chemical method to improve its fatty acid structure. A comparative tribological and compatibility study was also done in modified oil at similar concentration levels with both types of nanoparticles. The tribological test result exhibits 0.10% w/v concentration of the nanoadditive as optimum due to lowest wear scar and coefficient of friction. Higher concentration of the nanoparticles impaired the base oil performance. Different analytical tools were used to characterize the oil modification and worn surfaces. Moreover, the role of subsurface of the contacting material with the tribological performance has been reported.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

An Investigation of the Corrosion Mechanisms of Cu-7Ni-3Al-1Fe-1Mn Alloy in Chloride-Containing Environment

The corrosion mechanisms of Cu-7Ni-3Al-1Fe-1Mn (wt.%) alloy in a 3.5% NaCl solution are investigated through a multi-analytical approach. The formation, growth and stable corrosion stage of the stable corrosion layer are reflected by the change of electrochemical response with time. EDS and GI-XRD results show the presence of Cu{sub 2}(OH){sub 3}Cl and Cu{sub 2}O that are the main corrosion products, with the former predominantly present at topmost corrosion layer, and Cu{sub 2}O is mainly located in the inner part, followed by aluminum oxide closer to the alloy substrate.

36 MATERIALS SCIENCE↗

Morphology-controlled transformation of Cu@Au core-shell nanowires into thermally stable Cu 3 Au intermetallic nanowires

Multimetallic nanowires with long-range atomic ordering hold the promise of unique physicochemical properties in many applications. Here we demonstrate the synthesis and study the stability of Cu 3 Au intermetallic nanowires. The synthesis is achieved by using Cu@Au core-shell nanowires as precursors. With appropriate Cu/Au stoichiometry, the Cu@Au core-shell nanowires are transformed into fully ordered Cu 3 Au nanowires under thermal annealing. Thermally-driven atom diffusion accounts for this transformation as revealed by X-ray diffraction and electron microscopy studies. The twin boundaries abundant in the Cu@Au core-shell nanowires facilitate the ordering process. The resulting Cu 3 Au intermetallic nanowires have uniform and accurate atomic positioning in the crystal lattice, which enhances the nobility of Cu. No obvious copper oxides are observed in fully ordered Cu 3 Au nanowires after annealing in air at 200 °C, a temperature that is much higher than those observed in Cu@Au core-shell and pure Cu nanowires. This work opens up an opportunity for further research into the development and applications of intermetallic nanowires.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Improving aluminum particle reactivity by annealing and quenching treatments: Synchrotron X-ray diffraction analysis of strain

In bulk material processing, annealing and quenching metals such as aluminum (Al) can improve mechanical properties. On a single particle level, affecting mechanical properties may also affect Al particle reactivity. Our study examines the effect of annealing and quenching on the strain of Al particles and the corresponding reactivity of aluminum and copper oxide (CuO) composites. Micron-sized Al particles were annealed and quenched according to treatments designed to affect Al mechanical properties. Furthermore, synchrotron X-ray diffraction (XRD) analysis of the particles reveals that thermal treatment increased the dilatational strain of the aluminum-core, alumina-shell particles. Flame propagation experiments also show thermal treatments effect reactivity when combined with CuO. An effective annealing and quenching treatment for increasing aluminum reactivity was identified. Our results show that altering the mechanical properties of Al particles affects their reactivity.

36 MATERIALS SCIENCE↗

Nanoscale conditions for ductile void nucleation in copper: vacancy condensation and the growth-limited microstructural state

Ductile rupture or tearing usually involves structural degradation from the nucleation and growth of voids and their coalescence into cracks. Although some materials contain preexisting pores, the first step in failure is often the formation of voids. Because this step can govern both the failure strain and the fracture mechanism, it is critical to understand the mechanisms of void nucleation and the enabling microstructural configurations which give rise to nucleation. To understand the role of dislocations during void nucleation, the present study presents ex-situ cross-sectional observations of interrupted deformation experiments revealing incipient, subsurface voids in a copper material containing copper oxide inclusions. The local microstructural state was evaluated using electron backscatter diffraction (EBSD), electron channeling contrast (ECC), transmission electron microscopy (TEM), and transmission kikuchi diffraction (TKD). Surprisingly, before substantial growth and coalescence had occurred, the deformation process had resulted in the nucleation of a high density of nanoscale (≈50 μm) voids in the deeply deformed neck region where strains were on the order of 1.5. Such a proliferation of nucleation sites immediately suggests that the rupture process is limited by void growth, not nucleation. With regard to void growth, analysis of more than 20 microscale voids suggests that dislocation boundaries facilitate the growth process. The present observations call into question prior assumptions on the role of dislocation pile-ups and provide new context for the formulation of revised ductile rupture models. While the focus of this study is on damage accumulation in a highly ductile metal containing small, well-dispersed particles, these results are also applicable to understanding void nucleation in engineering alloys.

36 MATERIALS SCIENCE↗

Enhancement of high-temperature selectivity on Cu-SSZ-13 towards NH3-SCR reaction from highly dispersed ZrO2

ZrO2 is introduced as a secondary phase to Cu-SSZ-13 via different approaches and tested for the NH3-SCR reaction. It is shown that the vicinity between the two catalyst phases, i.e., ZrO2 dispersion, influences interaction between copper oxide (CuOx) on Cu-SSZ-13 and ZrO2. A strong interaction is achieved when ZrO2 is formed with high dispersion on Cu-SSZ-13, and leads to the chemical interaction of CuOx and ZrO2 in hydrothermally aged catalysts. The result is formation of a Cu-stabilized t-ZrO2 phase which greatly hinders the non-selective NH3 oxidation due to CuOx. With reduced ZrO2 dispersion and less Cu-SSZ-13 and ZrO2 interaction, the beneficial role of ZrO2 is diminished. This strategy of CuOx passivation is able to significantly enhance the high-temperature selectivity of the state-of-the-art NH3-SCR catalytic system while mitigating the adverse impact of CuOx clusters on the zeolite, potentially enabling higher Cu-content SCR catalysts and improved low-temperature activity.

NH3-SCR, ZrO2, selective catalytic reduction, afte↗

Forced flow cooling of high field, REBCO-based, fusion magnets using supercritical hydrogen, helium, and neon

Rare Earth Barium Copper Oxide (REBCO) High Temperature Superconductor (HTS) tapes are being considered for the Toroidal Field (TF) magnets of a highly compact, high field fusion reactor operating at magnetic fields as high as 21 T and operating temperatures in the range of 10–30 K. Due to the increase in range of operating conditions made available through HTS tapes, a new set of cryogenic fluids are being considered for forced flow cooling. The present study investigates helium, hydrogen, and neon as a forced flow coolant for REBCO HTS tapes used in a highly compact, high-field reactor design. Four design criteria are considered, including current sharing temperature, fluid inlet temperature, cable pressure drop (dP), and operating pressure. From these simulations, neon is removed from consideration due to its high required pressure drop and low temperature margins with respect to the current sharing limit. Helium and hydrogen are then compared, with hydrogen producing the highest overall heat transfer rate at its optimum operating condition (1.5 MPa/15 K). A compromise across inlet temperature, dP, and operating pressure is found when helium has a minimum initial temperature of 10 K and an inlet pressure of 2.0 MPa. For the current design, helium is selected as a coolant due its acceptable cable pressure drop, required cooling load, and system complexity inherent to a forced-flow cryogenic system.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗