Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COMPLEXES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

High-spin Mn–oxo complexes and their relevance to the oxygen-evolving complex within photosystem II

Significance Metal complexes with terminal oxido ligands are important in a wide variety of transformations, including a high valent manganese-oxido unit that is involved in the O–O bond-forming step in photosynthetic water oxidation. Theoretical proposals suggest that a Mn IV –oxyl radical species is present, yet such species have not been observed experimentally. Using a combination of experimental measurements and theoretical calculations, we show here that the bonding within the Mn–oxido unit is best described as highly covalent, with 0.45 spins on the oxido ligand. These findings offer a counter explanation for the putative high valent manganese species in photosynthesis as an energetically accessible, high-spin Mn V –oxido unit instead of a Mn IV –oxyl radical species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Ca2+ Effects on Fe(II) Interactions with Mn-Binding Sites in Mn-Depleted Oxygen-Evolving Complexes of Photosystem II and on Fe Replacement of Mn in Mn-Containing, Ca-Depleted Complexes

Fe(II) cations bind with high efficiency and specificity at the high-affinity (HA), Mn-binding site (termed the “blocking effect” since Fe blocks further electron donation to the site) of the oxygen-evolving complex (OEC) in Mn-depleted, photosystem II (PSII) membrane fragments (Semin et al. in Biochemistry 41:5854, 2002). Furthermore, Fe(II) cations can substitute for 1 or 2Mn cations (pH dependent) in Ca-depleted PSII membranes (Semin et al. in Journal of Bioenergetics and Biomembranes 48:227, 2016; Semin et al. in Journal of Photochemistry and Photobiology B 178:192, 2018). In the current study, we examined the effect of Ca2+ cations on the interaction of Fe(II) ions with Mn-depleted [PSII(-Mn)] and Ca-depleted [PSII(-Ca)] photosystem II membranes. We found that Ca2+ cations (about 50 mM) inhibit the light-dependent oxidation of Fe(II) (5 µM) by about 25% in PSII(-Mn) membranes, whereas inhibition of the blocking process is greater at about 40%. Blocking of the HA site by Fe cations also decreases the rate of charge recombination between QA- and YZ•+ from t1/2?=?30 ms to 46 ms. However, Ca2+ does not affect the rate during the blocking process. An Fe(II) cation (20 µM) replaces 1Mn cation in the Mn4CaO5 catalytic cluster of PSII(-Ca) membranes at pH 5.7 but 2 Mn cations at pH 6.5. In the presence of Ca2+ (10 mM) during the substitution process, Fe(II) is not able to extract Mn at pH 5.7 and extracts only 1Mn at pH 6.5 (instead of two without Ca2+). Measurements of fluorescence induction kinetics support these observations. Inhibition of Mn substitution with Fe(II) cations in the OEC only occurs with Ca2+ and Sr2+ cations, which are also able to restore oxygen evolution in PSII(-Ca) samples. Nonactive cations like La3+, Ni2+, Cd2+, and Mg2+ have no influence on the replacement of Mn with Fe. These results show that the location and/or ligand composition of one Mn cation in the Mn4CaO5 cluster is strongly affected by calcium depletion or rebinding and that bound calcium affects the redox potential of the extractable Mn4 cation in the OEC, making it resistant to reduction.

calcium↗
DOE OSTI2018

Controlled Generation of TiO x –Au Interface Using Titanium Molecular Complex Bearing Pyridyl Anchors: Synthesis, Characterization and Catalysis

Interfacial perimeter sites between metal and support are often important for catalysis. A mononuclear titanium siloxy complex III, Ti(acac) 2 [OSiC 6 H 5 N(OCH 3 ) 2 ] 2 was synthesized to generate TiOx units of different degrees of clustering to decorate Au nanoparticles. Two different methods of preparation were examined; one was to deposit III onto Au/SiO 2 and the other was to form III-covered Au nanoparticle first before deposition onto SiO 2 . The former method generated more highly dispersed TiO x units, while larger domains of TiO 2 were formed with the latter method, as deduced by UV–vis and XAS characterization. A model was proposed to explain how TiO x dispersity could be related to the preparative procedures. These samples were further tested as catalysts in selective oxidation of propane in a stream of O 2 and H 2 . They exhibited different product selectivities. The sample with more dispersed TiO x units were more selective for acetone formation versus propene formation. The results confirmed the important role of both the Au–TiO x interface at the perimeter and the extent of Ti isolation in the TiO x phase in the reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Structural complexity of γ-Al 2 O 3 : The nature of vacancy ordering and the structure of complex antiphase boundaries

The structure of γ-Al2O3 remains largely undetermined despite decades of research. This is due to the high degree of disorder, which poses significant challenges for structural analysis using conventional crystallographic approaches. Herein, we study the structure of γ-Al2O3 with Scanning Transmission Electron Microscopy (STEM) and ab-initio calculations to provide a complete structural description. We show that the microstructure can be understood in terms of two key structural features of nanoscale spinel domains and finite thickness segments termed as complex antiphase boundaries (cAPB) that provide the domain interconnectivity. The spinel domains have a distinctive preference for vacancy ordering, which can be rationalized in terms of a structure with a stacking disorder. Tetragonal P4 1 2 1 2 or monoclinic P2 1 models, all based on the identical motif, can be considered as representative ordered forms. Individual spinel domains are interconnected via cAPBs, which adopt a distinct non-spinel bonding environment of δ-Al 2 O 3 . The most common cAPB consists of a single delta motif with thickness of just 0.6 nm on (001), with the resulting displacement a/4 [101]. Remarkably, the cAPBs are shown to energetically stabilize the spinel domains of γ-Al 2 O 3 explaining their high abundance. We demonstrate how the tetragonal distortions naturally arise in this intricate microstructure and place the proposed model in the context of phase transformations to high temperature transition aluminas.

36 MATERIALS SCIENCE↗
DOE OSTI2015

First principles-based multiparadigm, multiscale strategy for simulating complex materials processes with applications to amorphous SiC films

Progress has recently been made in developing reactive force fields to describe chemical reactions in systems too large for quantum mechanical (QM) methods. In particular, ReaxFF, a force field with parameters that are obtained solely from fitting QM reaction data, has been used to predict structures and properties of many materials. Important applications require, however, determination of the final structures produced by such complex processes as chemical vapor deposition, atomic layer deposition, and formation of ceramic films by pyrolysis of polymers. This requires the force field to properly describe the formation of other products of the process, in addition to yielding the final structure of the material. We describe a strategy for accomplishing this and present an example of its use for forming amorphous SiC films that have a wide variety of applications. Extensive reactive molecular dynamics (MD) simulations have been carried out to simulate the pyrolysis of hydridopolycarbosilane. The reaction products all agree with the experimental data. After removing the reaction products, the system is cooled down to room temperature at which it produces amorphous SiC film, for which the computed radial distribution function, x-ray diffraction pattern, and the equation of state describing the three main SiC polytypes agree with the data and with the QM calculations. Extensive MD simulations have also been carried out to compute other structural properties, as well the effective diffusivities of light gases in the amorphous SiC film.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Role of inner solvation sheath within salt–solvent complexes in tailoring electrode/electrolyte interphases for lithium metal batteries

Functional electrolyte is the key to stabilizing the highly reductive lithium (Li) metal anode (LMA) and high voltage cathode for long life, high energy-density rechargeable Li metal batteries (LMBs). However, fundamental knowledge of the interaction principles between reactive electrodes and electrolytes is still limited. Recently localized high-concentration electrolytes (LHCEs) are emerging as promising electrolyte design strategies for LMBs. They can also serve as an ideal platform for understanding the reactivity characteristics of the inner solvation sheath on electrode surfaces due to their unique solvation structures. Here, we study the effects of a series of LHCEs with model electrolyte solvents (carbonate, sulfone, phosphate and ether) in high voltage LMBs. Varied electrode stabilities exhibited in different LHCEs indicate the intricate synergies between the salt and the solvent on electrode surfaces. Experimental and theoretical analyses reveal an intriguing general rule that the strong interactions between the salt and the solvent in the inner solvation sheath promote their intermolecular proton/charge transfer reactions, which dictates the properties of the electrode/electrolyte interphases and thus the battery performances.

Solvation sheath, salt-solvent complex, electrode/↗
DOE OSTI2011

Study of the transport properties of organic semiconductors based on europium diphthalocyanine and bi-tris-phthalocyanine complexes with ortho-bis(oxymethyl)phenyl bridge and based on erbium and europium dinaphthalocyanine complexes

The transport properties of organic semiconductors based on europium diphthalocyanine and bitris-phthalocyanine complexes with ortho-bis(oxymethyl)phenyl bridge and based on europium and erbium dinaphthalocyanine are studied. The temperature dependences of the dc conductivity for all types of the structures under study are obtained; it is shown that all dependences include two activation portions. For high-temperature portions, the activation energies are determined as 0.85 eV for europium diphthalocyanine with the ortho-bis(oxymethyl)phenyl bridge, 1.135 eV for europium bi-tris-phthalocyanine with the orthobis(oxymethyl)phenyl bridge, 0.98 eV for europium dinaphthalocyanine, and 1.18 eV for erbium dinaphthalocyanine. For the low-temperature activation portion, it is shown that lanthanide ions and their bond with a ligand make the dominant contribution to the conductivity of the structures under study.

36 MATERIALS SCIENCE↗
DOE OSTI2018

The antimalarial compound ELQ ‐400 is an unusual inhibitor of the bc 1 complex, targeting both Q o and Q i sites

Inhibitors of the mitochondrial respiratory chain cytochrome bc 1 complex, such as the antimalarial atovaquone and ELQ ‐300, and many well‐studied compounds, are classified as either Q o or Q i site inhibitors based on their site of action. Here, we investigated the site of action of ELQ ‐400 that showed an unusual behaviour, being effective against parasites resistant to the Q o site inhibitor atovaquone or to the Q i site inhibitor ELQ ‐300. Analysis of yeast mutants and comparison with atovaquone and other ELQ s strongly suggest that ELQ ‐400 targets both Q o and Q i sites. Dual site inhibition would be particularly efficient as it would lower the risk of acquired resistance. However, such compounds are seldom found, which could be explained by structural and mechanistic differences between the sites.

Song, Zehua↗
DOE OSTI2019

Highly Efficient Blue OLEDs Based on Metal‐Assisted Delayed Fluorescence Pd(II) Complexes

Abstract A series of metal‐assisted delayed fluorescence (MADF) palladium(II) complexes, PdN1N, PdN1N‐dm, and PdN6N, are studied. Their 77 K photoluminescence emission spectra show a narrow primary emission peak at 464, 466, and 470 nm, respectively, with small vibronic peaks characteristic of many phosphorescent emitters. At room temperature (300 K), the dominant emission peaks for PdN1N, PdN1N‐dm, and PdN6N are slightly redshifted to 472, 470, and 476 nm, respectively. In the meantime, a broad sideband is also shown between 410 and 450 nm due to the MADF process. A blue device employing PdN1N‐dm demonstrates an electroluminescence emission peak at 476 nm and the maximum external quantum efficiency (EQE) of 25.1%. The high maximum EQE of the blue organic light‐emitting diode (OLED) device indicates that both the phosphorescence and the delayed fluorescence are very efficient. In addition, a stable OLED device of PdN1N‐dm gives a maximum EQE of 9.8% and the estimated operational lifetime LT 70 of 350 h at the practical luminance of 100 cd m −2 .

Zhu, Zhi‐Qiang↗
DOE OSTI2015

Synthesis and Characterization of a Triphos Ligand Derivative and the Corresponding Pd II Complexes: Triphos Ligand Derivative and Corresponding Pd II Complexes

The synthesis of the new bis(2-(diphenylphosphino)ethyl)methylhydroxyphosphine tridentate phosphine ligand, LCH2OH/Ph, is reported. The ligand reacts with [Pd(Cl)2(PhCN)2 to form [Pd(LCH2OH/Ph)Cl]Cl. Exchange of the chloride ions for triflate (OTf–) using AgOTf yielded pure [Pd(LCH2OH/Ph)OTf]OTf. In addition to spectral characterization the free ligand, LCH2OH/Ph, and Pd(II) complex, [Pd(LCH2OH/Ph)OTf]OTf, are structurally characterized. This research was supported by the US Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Biosciences, and Geosciences. Pacific Northwest National Laboratory is a multiprogram national laboratory operated by Battelle for DOE.

Miller, Deanna L.↗