Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CLIMATE MODELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Development and Evaluation of Chemistry‐Aerosol‐Climate Model CAM5‐Chem‐MAM7‐MOSAIC: Global Atmospheric Distribution and Radiative Effects of Nitrate Aerosol

Abstract An advanced aerosol treatment, with a focus on semivolatile nitrate formation, is introduced into the Community Atmosphere Model version 5 with interactive chemistry (CAM5‐chem) by coupling the Model for Simulating Aerosol Interactions and Chemistry (MOSAIC) with the 7‐mode Modal Aerosol Module (MAM7). An important feature of MOSAIC is dynamic partitioning of all condensable gases to the different fine and coarse mode aerosols, as governed by mode‐resolved thermodynamics and heterogeneous chemical reactions. Applied in the free‐running mode from 1995 to 2005 with prescribed historical climatological conditions, the model simulates global distributions of sulfate, nitrate, and ammonium in good agreement with observations and previous studies. Inclusion of nitrate resulted in ∼10% higher global average accumulation mode number concentrations, indicating enhanced growth of Aitken mode aerosols from nitrate formation. While the simulated accumulation mode nitrate burdens are high over the anthropogenic source regions, the sea‐salt and dust modes respectively constitute about 74% and 17% of the annual global average nitrate burden. Regional clear‐sky shortwave radiative cooling of up to −5 W m −2 due to nitrate is seen, with a much smaller global average cooling of −0.05 W m −2 . Significant enhancements in regional cloud condensation nuclei (at 0.1% supersaturation) and cloud droplet number concentrations are also attributed to nitrate, causing an additional global average shortwave cooling of −0.8 W m −2 . Taking into consideration of changes in both longwave and shortwave radiation under all‐sky conditions, the net change in the top of the atmosphere radiative fluxes induced by including nitrate aerosol is −0.7 W m −2 .

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Robust evaluation of ENSO in climate models: How many ensemble members are needed?

Large ensembles of model simulations require considerable resources, and thus defining an appropriate ensemble size for a particular application is an important experimental design criterion. We estimate the ensemble size (N) needed to assess a model's ability to capture observed El Niño-Southern Oscillation (ENSO) behavior by utilizing the recently developed International CLIVAR ENSO Metrics Package (Planton et al., 2021). Using the larger ensembles available from CMIP6 and the US CLIVAR Large Ensemble Working Group, we find that larger ensembles are needed to robustly capture baseline ENSO characteristics (N > 50) and physical processes (N > 50) than the background climatology (N ≥ 12) and remote ENSO teleconnections (N ≥ 6). While these results vary somewhat across metrics and models, our study quantifies how larger ensembles are required to robustly evaluate simulated ENSO behavior, thereby providing some guidance for the design of model ensembles.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Evaluation of the CAM6 Climate Model Using Cloud Observations at McMurdo Station, Antarctica

A comparative analysis between observational data from McMurdo Station, Antarctica and the Community Atmosphere Model version 6 (CAM6) simulation is performed focusing on cloud characteristics and their thermodynamic conditions. Ka-band Zenith Radar (KAZR) and High Spectral Resolution Lidar (HSRL) retrievals are used as the basis of cloud fraction and cloud phase identifications. Radiosondes released at 12-hour increments provide atmospheric profiles for evaluating the simulated thermodynamic conditions. Our findings show that the CAM6 simulation consistently overestimates (underestimates) cloud fraction above (below) 3 km in four seasons of a year. Normalized by total in-cloud samples, ice and mixed phase occurrence frequencies are underestimated and liquid phase frequency is overestimated by the model at cloud fractions above 0.6, while at cloud fractions below 0.6 ice phase frequency is overestimated and liquid-containing phase frequency is underestimated by the model. The cloud fraction biases are closely associated with concurrent biases in relative humidity (RH), i.e., high (low) RH biases above (below) 2 km. Frequencies of correctly simulating ice and liquid-containing phase increase when the absolute biases of RH decrease. Cloud fraction biases also show a positive correlation with RH biases. Water vapor mixing ratio biases are the primary contributor to RH biases, and hence, likely a key factor controlling the cloud biases. Finally, this diagnosis of the evident shortfalls of representations of cloud characteristics in CAM6 simulation at McMurdo Station brings new insight in improving the governing model physics therein.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Resolving Away Stratocumulus Biases in Modern Global Climate Models

Abstract Increased horizontal and vertical resolution in global atmospheric models can reduce a significant amount of the biases associated with subtropical marine stratocumulus. The sensitivity of offshore and coastal marine stratocumulus to different horizontal and vertical resolutions has been investigated by using Energy Exascale Earth System Model (E3SM) coupled with the novel Framework for Improvement by Vertical Enhancement which has been demonstrated as a viable tool to improve the representation of marine stratocumulus while saving computational cost. Our study shows that high vertical resolution is the key to improve marine stratocumulus simulations in E3SM. Concurrent horizontal and vertical resolution increases are needed for substantial overall reduction of stubborn marine stratocumulus biases over the coastal region but not necessarily in the offshore area.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Convective Transition Statistics over Tropical Oceans for Climate Model Diagnostics: Observational Baseline

Convective transition statistics, which describe the relation between column-integrated water vapor (CWV) and precipitation, are compiled over tropical oceans using satellite and ARM site measurements to quantify the temperature and resolution dependence of the precipitation–CWV relation at fast time scales relevant to convection. At these time scales, and for precipitation especially, uncertainties associated with observational systems must be addressed by examining features with a variety of instrumentation and identifying robust behaviors versus instrument sensitivity at high rain rates. Here the sharp pickup in precipitation as CWV exceeds a certain critical threshold is found to be insensitive to spatial resolution, with convective onset occurring at higher CWV but at lower column relative humidity as bulk tropospheric temperature increases. Mean tropospheric temperature profiles conditioned on precipitation show vertically coherent structure across a wide range of temperature, reaffirming the use of a bulk temperature measure in defining the convective transition statistics. The joint probability distribution of CWV and precipitation develops a peak probability at low precipitation for CWV above critical, with rapidly decreasing probability of high precipitation below and near critical, and exhibits systematic changes under spatial averaging. The precipitation pickup with CWV is reasonably insensitive to time averaging up to several hours but is smoothed at daily time scales. This work demonstrates that CWV relative to critical serves as an effective predictor of precipitation with only minor geographic variations in the tropics, quantifies precipitation-related statistics subject to different spatial–temporal resolution, and provides a baseline for model comparison to apply these statistics as observational constraints on precipitation processes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

A Comprehensive Analysis of Uncertainties in Warm-Rain Parameterizations in Climate Models Based on In Situ Measurements

Abstract Because of the coarse grid size of Earth system models (ESMs), representing warm-rain processes in ESMs is a challenging task involving multiple sources of uncertainty. Previous studies evaluated warm-rain parameterizations mainly according to their performance in emulating collision–coalescence rates for local droplet populations over a short period of a few seconds. The representativeness of these local process rates comes into question when applied in ESMs for grid sizes on the order of 100 km and time steps on the order of 20–30 min. We evaluate several widely used warm-rain parameterizations in ESM application scenarios. In the comparison of local and instantaneous autoconversion rates, the two parameterization schemes based on numerical fitting to stochastic collection equation (SCE) results perform best. However, because of Jessen’s inequality, their performance deteriorates when grid-mean, instead of locally resolved, cloud properties are used in their simulations. In contrast, the effect of Jessen’s inequality partly cancels the overestimation problem of two semianalytical schemes, leading to an improvement in the ESM-like comparison. In the assessment of uncertainty due to the large time step of ESMs, it is found that the rainwater tendency simulated by the SCE is roughly linear for time steps smaller than 10 min, but the nonlinearity effect becomes significant for larger time steps, leading to errors up to a factor of 4 for a time step of 20 min. After considering all uncertainties, the grid-mean and time-averaged rainwater tendency based on the parameterization schemes is mostly within a factor of 4 of the local benchmark results simulated by SCE.

Meteorology & Atmospheric Sciences↗
DOE OSTI2012

Toward a Minimal Representation of Aerosols in Climate Models: Comparative Decomposition of Aerosol Direct, Semidirect, and Indirect Radiative Forcing

The authors have decomposed the anthropogenic aerosol radiative forcing into direct contributions from each aerosol species to the planetary energy balance through absorption and scattering of solar radiation, indirect effects of anthropogenic aerosol on solar and infrared radiation through droplet and crystal nucleation on aerosol, and semidirect effects through the influence of solar absorption on the distribution of clouds. A three-mode representation of the aerosol in version 5.1 of the Community Atmosphere Model (CAM5.1) yields global annual mean radiative forcing estimates for each of these forcing mechanisms that are within 0.1 W m–2 of estimates using a more complex seven-mode representation that distinguishes between fresh and aged black carbon and primary organic matter. Simulating fresh black carbon particles separately from internally mixed accumulation mode particles is found to be important only near fossil fuel sources. In addition to the usual large indirect effect on solar radiation, this study finds an unexpectedly large positive longwave indirect effect (because of enhanced cirrus produced by homogenous nucleation of ice crystals on anthropogenic sulfate), small shortwave and longwave semidirect effects, and a small direct effect (because of cancelation and interactions of direct effects of black carbon and sulfate). Differences between the threemode and seven-mode versions are significantly larger (up to 0.2 W m–2) when the hygroscopicity of primary organic matter is decreased from 0.1 to 0 and transfer of the primary carbonaceous aerosol to the accumulation mode in the seven-mode version requires more hygroscopic material coating the primary particles. Radiative forcing by cloudborne anthropogenic black carbon is only 20.07 W m–2.

Aerosol Direct↗
DOE OSTI2017

Local Atmospheric Response to an Open-Ocean Polynya in a High-Resolution Climate Model

Abstract In this paper the atmospheric response to an open-ocean polynya in the Southern Ocean is studied by analyzing the results from an atmospheric and oceanic synoptic-scale resolving Community Earth System Model (CESM) simulation. While coarser-resolution versions of CESM generally do not produce open-ocean polynyas in the Southern Ocean, they do emerge and disappear on interannual time scales in the synoptic-scale simulation. This provides an ideal opportunity to study the polynya’s impact on the overlying and surrounding atmosphere. This has been pursued here by investigating the seasonal cycle of differences of surface and air-column variables between polynya and nonpolynya years. The results indicate significant local impacts on turbulent heat fluxes, precipitation, cloud characteristics, and radiative fluxes. In particular, it is found that clouds over polynyas are optically thicker and higher than clouds over sea ice during nonpolynya years. Although the lower albedo of polynyas significantly increases the net shortwave absorption, the enhanced cloud brightness tempers this increase by almost 50%. Also, in this model, enhanced longwave radiation emitted from the warmer surface of polynyas is balanced by stronger downwelling fluxes from the thicker cloud deck. Impacts are found to be sensitive to the synoptic wind direction. The strongest regional impacts are found when northeasterly winds cross the polynya and interact with katabatic winds. Surface air pressure anomalies over the polynya are only found to be significant when cold, dry air masses strike over the polynya (i.e., in the case of southerly winds).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2012

Hydrologic Extremes in a Changing Climate: How Much Information Can Regional Climate Models Provide? (Final Report)

We proposed to identify a set of about 10 urban areas across the western U.S., and hourly precipitation data within each of these areas, which were extracted from the NCDC TD 3240. We also proposed to analyze the annual maximum series of precipitation extremes simulated for NARCCAP (using Reanalysis boundary forcing) for the grid cells close to station data, and to compare the distributions of annual maximum precipitation for accumulation intervals ranging from one to 28 hours. Recognizing that there may inevitably be differences between the station data and RCM grid cell values, we proposed to examine the scale dependence in the distributions of extremes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2014

Persistence of systematic errors in the Asian-Australian monsoon precipitation basic states in climate models: a way forward

The annual cycle of the Asian-Australian monsoon (AAM) system can be regarded as the seasonal displacement of the large-scale Intertropical Convergence Zone (ITCZ), which is anchored by the north-south migration of the Indo-Pacific warm pool. In the respective hemispheres, intense solar heating over land during spring and early summer provide the necessary thermodynamic conditions for the occurrence of deep convection off the equator. The rainfall and diabatic heating associated with the AAM is perhaps the most vigorous of all the regional monsoon components in the globe. Yet, skill in monsoon prediction (days to seasons) by dynamical models remains low, partly due to our lack of understanding of the entirety of the monsoon system and our inability to model the interactive processes that govern it. Simulating the monsoon precipitation climatology remains a grand challenge. The multi-model mean (MMM) errors for summertime precipitation relative to GPCP observations have shown little improvement in CMIP5 as compared to CMIP3. For the Asian Summer Monsoon, the MMM monsoon rainfall is weaker over South Asia, the western equatorial Indian Ocean and tropical West Pacific. For the Australian summer monsoon, it is excessive over most of the Maritime Continent, and deficient over northern Australia. Throughout the year, excessive rainfall is simulated over South China Sea – Maritime Continent regions, and CMIP5 models do not capture the annual cycle of the AAM. One implication is that uncertainties in future projections (e.g., IPCC 2013) of AAM mean rainfall may not have reduced from CMIP3 to CMIP5. Solutions from an intermediate model show that diabatic heating (Q) associated with the AAM influences the global circulation. Compared to the reanalysis, many models tend to have maxima at the mid-troposphere but their simulated amplitude is overestimated in the lower troposphere (900-700 hPa) and underestimated from 600-300 hPa, a feature readily apparent in the MMM composite (dashed black line). The lower troposphere peak may be attributed to misrepresentations in shallow convection. Some outliers, such as CSIROMk3- 6-0 and ACCESS1-3, do not show any appreciable vertical structure, and the simulated monsoon over South Asia is virtually absent in these models. TRMM observations indicate that over the monsoon region the contribution from stratiform rainfall is about 40% to the Q intensity. In contrast, most of the CMIP3 models produce too much convective rainfall (95% of the total) and too little stratiform precipitation. Given the persistence of errors, we speculate that errors in the partitioning of total rainfall into convective-stratiform still persist in CMIP5, and may be one of the reasons for underestimation (overestimation) of Q in the layer 600-300 (900-700) hPa. In summary, the rather slow progress in modeling in the last decade or so led us to wonder: Has the scientific community reached a “plateau” in modeling mean monsoon precipitation?

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2016

Improving the representation of soluble iron in climate models

Funding from this grant supported Rachel Sanza, Yan Zhang and partially Samuel Albani. Substantial progress has been made on inclusion of mineralogy, showing the quality of the simulations, and the impact on radiation in the CAM4 and CAM5 (Scanza et al., 2015). In addition, the elemental distribution has been evaluated (and partially supported by this grant) (Zhang et al., 2015), showing that using spatial distributions of mineralogy, improved resperentation of Fe, Ca and Al are possible, compared to the limited available data. A new intermediate complexity soluble iron scheme was implemented in the Bulk Aerosol Model (BAM), which was completed as part of Rachel Scanza’s PhD thesis. Currently Rachel is writing up at least two first author papers describing the general methods and comparison to observations (Scanza et al., in prep.), as well as papers describing the sensitivity to preindustrial conditions and interannual variability. This work lead to the lead PI being asked to write a commentary in Nature (Mahowald, 2013) and two review papers (Mahowald et al., 2014, Mahowald et al., submitted) and contributed to related papers (Albani et al., 2016, Albani et al., 2014, Albani et al., 2015).

54 ENVIRONMENTAL SCIENCES↗