Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Boundary condition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

An experimental search for near-wall boundary conditions for large eddy simulation

Instantaneous wall shear stress and streamwise velocities have been measured simultaneously in a flat plate, turbulent boundary layer at moderate Reynolds number in an effort to provide experimental support for large eddy simulations. Data were obtained by using a buried-wire wall shear gage and a hot-wire rake positioned in the log region of the flow. All data processing was accomplished with digital data analysis techniques on a minicomputer. Fluctuations of the instantaneous U plus versus Y plus profiles about a mean law of the wall are shown to be significant and complex. Peak cross-correlation values between wall shear stress and the velocities are high and reflect the passage of a large structure inclined at a small angle to the wall. Estimates of this angle are consistent with those made by other investigators. Conditional sampling techniques were used to detect the passage of various sizes and types of flow disturbances (events) and to estimate their mean frequency of occurrence. Events characterized by large and sudden streamwise accelerations were found to be highly coherent throughout the log region and were strongly correlated with large fluctuations in wall shear-stress. Phase randomness between the near-wall quantities and the outer velocities was small. The results suggest that the flow events detected by conditional sampling applied to velocities in the log region may be related to the bursting process.

Robinson, S. K.↗
NASA NTRS1971

Boundary condition computational procedures for inviscid, supersonic steady flow field calculations

Results are given of a comparative study of numerical procedures for computing solid wall boundary points in supersonic inviscid flow calculatons. Twenty five different calculation procedures were tested on two sample problems: a simple expansion wave and a simple compression (two-dimensional steady flow). A simple calculation procedure was developed. The merits and shortcomings of the various procedures are discussed, along with complications for three-dimensional and time-dependent flows.

Abbett, M. J.↗
NASA NTRS1973

Boundary condition calculation procedures for inviscid supersonic flow fields.

Results are given of a comparative study of numerical procedures for computing solid wall and sharp shock boundary points in supersonic inviscid flow calculations. Thirty different calculation procedures were tested on four sample problems in two dimensional steady flow. A new simple but accurate calculation procedure was developed for solid wall boundary point calculations. The merits and shortcomings of the various procedures are thoroughly discussed.

Abbett, M. J.↗
NASA NTRS1993

A nonreflecting upper boundary condition for anelastic nonhydrostatic mesoscale gravity-wave models

A sponge layer is formulated to prevent spurious reflection of vertically propagating quasi-stationary gravity waves at the upper boundary of a two-dimensional numerical anelastic nonhydrostatic model. The sponge layer includes damping of both Newtonian-cooling type and Rayleigh-friction type, whose coefficients are determined in such a way that the reflectivity of wave energy at the bottom of the layer is zero. Unlike the formulations in earlier studies, our formulation includes the effects of vertical discretization, vertical mean density variation, and nonhydrostaticity. This sponge formulation is found effective in suppressing false downward reflection of waves for various types of quasi-stationary forcing.

Kim, Young-Joon↗
NASA NTRS1981

Numerical approximation of boundary conditions with applications to inviscid equations of gas dynamics

A comprehensive overview of the state of the art of well-posedness and stability analysis of difference approximations for initial boundary value problems of the hyperbolic type is presented. The applicability of recent theoretical development to practical calculations for nonlinear gas dynamics is examined. The one dimensional inviscid gas dynamics equations in conservation law form are selected for numerical experiments. The class of implicit schemes developed from linear multistep methods in ordinary differential equations is chosen and the use of linear extrapolation as an explicit or implicit boundary scheme is emphasized. Specification of boundary data in the primitive variables and computation in terms of the conservative variables in the interior is discussed. Some numerical examples for the quasi-one-dimensional nozzle are given.

Yee, H. C.↗
NASA NTRS2003

High Energy Boundary Conditions for a Cartesian Mesh Euler Solver

Inlets and exhaust nozzles are common place in the world of flight. Yet, many aerodynamic simulation packages do not provide a method of modelling such high energy boundaries in the flow field. For the purposes of aerodynamic simulation, inlets and exhausts are often fared over and it is assumed that the flow differences resulting from this assumption are minimal. While this is an adequate assumption for the prediction of lift, the lack of a plume behind the aircraft creates an evacuated base region thus effecting both drag and pitching moment values. In addition, the flow in the base region is often mis-predicted resulting in incorrect base drag. In order to accurately predict these quantities, a method for specifying inlet and exhaust conditions needs to be available in aerodynamic simulation packages. A method for a first approximation of a plume without accounting for chemical reactions is added to the Cartesian mesh based aerodynamic simulation package CART3D. The method consists of 3 steps. In the first step, a components approach where each triangle is assigned a component number is used. Here, a method for marking the inlet or exhaust plane triangles as separate components is discussed. In step two, the flow solver is modified to accept a reference state for the components marked inlet or exhaust. In the third step, the flow solver uses these separated components and the reference state to compute the correct flow condition at that triangle. The present method is implemented in the CART3D package which consists of a set of tools for generating a Cartesian volume mesh from a set of component triangulations. The Euler equations are solved on the resulting unstructured Cartesian mesh. The present methods is implemented in this package and its usefulness is demonstrated with two validation cases. A generic missile body is also presented to show the usefulness of the method on a real world geometry.

Pandya, Shishir↗
DOE OSTI2020

Consistent boundary conditions for PDE filter regularization in topology optimization

Abstract Design variables in density-based topology optimization are typically regularized using filtering techniques. In many cases, such as stress optimization, where details at the boundaries are crucially important, the filtering in the vicinity of the design domain boundary needs special attention. One well-known technique, often referred to as “padding,” is to extend the design domain with extra layers of elements to mitigate artificial boundary effects. We discuss an alternative to the padding procedure in the context of PDE filtering. To motivate this augmented PDE filter, we make use of the potential form of the PDE filter which allows us to add penalty terms with a clear physical interpretation. The major advantages of the proposed augmentation compared with the conventional padding is the simplicity of the implementation and the possibility to tune the boundary properties using a scalar parameter. Analytical results in 1D and numerical results in 2D and 3D confirm the suitability of this approach for large-scale topology optimization.

42 ENGINEERING↗
NASA NTRS2011

Discretely Conservative Finite-Difference Formulations for Nonlinear Conservation Laws in Split Form: Theory and Boundary Conditions

Simulations of nonlinear conservation laws that admit discontinuous solutions are typically restricted to discretizations of equations that are explicitly written in divergence form. This restriction is, however, unnecessary. Herein, linear combinations of divergence and product rule forms that have been discretized using diagonal-norm skew-symmetric summation-by-parts (SBP) operators, are shown to satisfy the sufficient conditions of the Lax-Wendroff theorem and thus are appropriate for simulations of discontinuous physical phenomena. Furthermore, special treatments are not required at the points that are near physical boundaries (i.e., discrete conservation is achieved throughout the entire computational domain, including the boundaries). Examples are presented of a fourth-order, SBP finite-difference operator with second-order boundary closures. Sixth- and eighth-order constructions are derived, and included in E. Narrow-stencil difference operators for linear viscous terms are also derived; these guarantee the conservative form of the combined operator.

Fisher, Travis C.↗
NASA NTRS2018

Downscaling Atmosphere-Ocean Global Climate Model Precipitation Simulations over Africa Using Bias-Corrected Lateral and Lower Boundary Conditions

A prequel study showed that dynamic downscaling using a regional climate model (RCM) over Africa improved the Goddard Institute for Space Studies Atmosphere-Ocean Global Climate Model (GISS AOGCM: ModelE) simulation of June–September rainfall patterns over Africa. The current study applies bias corrections to the lateral and lower boundary data from the AOGCM driving the RCM, based on the comparison of a 30-year simulation to the actual climate. The analysis examines the horizontal pattern of June–September total accumulated precipitation, the time versus latitude evolution of zonal mean West Africa (WA) precipitation (showing monsoon onset timing), and the latitude versus altitude cross-section of zonal winds over WA (showing the African Easterly Jet and the Tropical Easterly Jet). The study shows that correcting for excessively warm AOGCM Atlantic sea-surface temperatures (SSTs) improves the simulation of key features, whereas applying 30-year mean bias corrections to atmospheric variables driving the RCM at the lateral boundaries does not improve the RCM simulations. We suggest that AOGCM climate projections for Africa should benefit from downscaling by nesting an RCM that has demonstrated skill in simulating African climate, driven with bias-corrected SST.

West African monsoon↗
NASA NTRS2005

Sensitivity of Stratospheric Retrievals from Radio Occultations on Upper Boundary Conditions

The main uncertainty in the stratospheric retrievals from GPS radio occultation (RO) measurements comes from the lack of reliable measurements in the upper stratosphere and above where the bending due to the neutral atmosphere is weak and residual ionospheric effects are strong. In this work, we quantify the bias and uncertainty of the refractivity and temperature retrievals due to different upper boundary strategies using a simulation study. We use lidar refractivity and temperature profiles as the input states in generating the synthetic occultations. Random noise levels commensurate with the CHAMP RO measurements are then added to the simulated data. Through this study, the sensitivity of stratospheric retrievals to upper boundary methods and parameters are examined. Such error characterizations are important prerequisites towards the effective use of GPS RO data in climate monitoring.

GPS↗
NASA NTRS2001

Boundary Conditions of the Heliosphere

We present new calculations of the ionization of the Local Interstellar Cloud (LIC) by directly observed sources including nearby stellar extreme ultraviolet (EUV) sources and the diffuse emission of the Soft X-ray Background (SXRB). In addition, we model the important, unobserved EUV emission both from the hot gas responsible for the SXRB and from a possible evaporative boundary between the LIC and the hot gas. We show that these ionization sources can provide the necessary ionization and heating of the cloud to match observations. Including the radiation from the conductive boundary, while not required, does improve the agreement with observations of the temperature of the LIC. The ionization predicted in our models shows good agreement with pickup ion results, interstellar absorption line data towards epsilon CMa, and EUV opacity measurements of nearby white dwarf stars. The areas of disagreement point to a possible underabundance (relative to solar abundance) of neon in the LIC. The presence of dust in the cloud, or at least depleted abundances, is necessary to maintain the heating/cooling balance and reach the observed temperature.

Slavin, Jonathan D.↗
NASA NTRS1985

A note on the loop thermosyphon with mixed boundary conditions

This paper presents a one-dimensional model for flow in a toroidal fluid loop in which the wall heat transfer coefficient is constant over one half of the loop, and zero over the other. A mathematically low-dimensional form of the model gives reasonably accurate predictions of the steady state mass flow, stability, and the nature of nonsteady motions. Numerical computations with a high-dimensional model illustrate the effects of mixed boundaries and axial heat conduction on the chaotic solutions. Comparisons are made with previous low-dimensional models that are exact only for a spatially uniform heat transfer coefficient.

Hart, J. E.↗
NASA NTRS1987

Effect of boundary conditions on dynamic strain response of rectangular panels

An analytical and experimental research program has been initiated at NASA Langley to investigate the strain response of panels under severe thermal and/or acoustic loads. The overall purpose of this program is to develop an analytical model that predicts the stresses and strains leading to sonic fatigue failure in advanced aircraft and aerospace structures. Previous experiments, analyses, and results of this program are reviewed. The analytical modeling refinements and their effects on the calculation of strain are discussed, considering the inclusion of in-plane motion at the panel boundary; the use of the multiterm, multimode Ritz method; and the introduction of transverse stiffness at the boundary. Finally, the findings of the analytical modeling investigation are summarized.

Roussos, Louis A.↗
NASA NTRS1995

On absorbing boundary conditions for linearized Euler equations by a perfectly matched layer

Recently, Berenger introduced a Perfectly Matched Layer (PML) technique for absorbing electromagnetic waves. In the present paper, a perfectly matched layer is proposed for absorbing out-going two-dimensional waves in a uniform mean flow, generated by linearized Euler equations. It is well known that the linearized Euler equations support acoustic waves, which travel with the speed of sound relative to the mean flow, and vorticity and entropy waves, which travel with the mean flow. The PML equations to be used at a region adjacent to the artificial boundary for absorbing these linear waves are defined. Plane waves solutions to the PML equations are developed and wave propagation and absorption properties are given. It is shown that the theoretical reflection coefficients at an interface between the Euler and PML domains are zero, independent of the angle of incidence and frequency of the waves. As such, the present study points out a possible alternative approach for absorbing out-going waves of the Euler equations with little or no reflection in computation. Numerical examples that demonstrate the validity of the proposed PML equations are also presented.

Hu, Fang Q.↗
NASA NTRS1991

A nested grid, nonhydrostatic, elastic model using a terrain-following coordinate transformation - The radiative-nesting boundary conditions

This study presents a nested-grid nonhydrostatic and elastic model using a terrain-following coordinate transformation as well as a unique application of grid-nesting techniques to the time-splitting elastic model. A simulation of the 10-m-high Witch of Agnesi Mountain provides the control to test this new model. The results show that the model produces the same solution as that derived from a simple linear analytic model. It is demonstrated that the new nested-grid model improves model resolution without resorting to the costly method of placing a fine-resolution grid over the entire domain. Since the wave reflection from the boundaries of the fine-grid model is well controlled, the boundary of the nested fine-grid model can be located even at the wave-active region. The model can be used to simulate various weather systems in which scale interactions are important.

Chen, Chaing↗
NASA NTRS1988

The effect of elastic boundary conditions on the dynamic response of rectangular plates

Natural frequencies and forced steady-state harmonic response for the vibration of uniform rectangular plates with edges elastically restrained against rotation and transverse translation are addressed. A single mode Rayleigh-Ritz solution is derived using functions that describe the normal modes of vibration of a beam whose ends are elastically restrained. The finite element solution is obtained for comparison. MACSYMA symbolic manipulation system is implemented as an aid to the mathematical rigor of the Ritz approach, and NASTRAN finite element code is used to model the mechanical system. Comparisons are made to published results and the solutions of this study are found to give lower frequencies for some values of boundary restraint. Steady-state harmonic amplitudes of displacement and acceleration are found to agree favorably for the two solutions. Low predictions of steady-state strain from NASTRAN result in some cases when compared to the Ritz values. Finally, a subjective assessment is made about the merit of using MACSYMA and NASTRAN.

Brewer, Terry K.↗
NASA NTRS1981

Three dimensional boundary conditions in supersonic flow

A theoretical analysis of the flow pattern at a solid surface in three dimensional supersonic flow is presented. The additional information necessary to overcome the nonuniqueness associated with the body tangency condition in three dimensions was developed. The analysis is based on the fact that three dimensional waves propagate locally exactly as they do in axisymmetric flow when viewed in the osculating plane to the streamline. The supersonic flow over an infinite swept corner is examined by both the classical solution and the three dimensional solution in the osculating plane and the results are shown to be identical. A simple numerical algorithm is proposed which accounts for the three wave surfaces that interact at a solid boundary.

Rudman, S.↗