Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BiO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Developing a Database of Bio-based Materials for Building Envelope Applications

Oak Ridge National Laboratory (ORNL) has been funded by the Department of Energy (DOE) to help accelerate the introduction of building envelope materials that would reduce the carbon footprint of the buildings sector. The DOE’s Building Technologies Office has historically sought to resolve the knowledge gaps regarding the energy efficiency and moisture durability of building envelope systems and to develop the data, guidance, and tools needed to facilitate rapid industry adoption of high-performance, moisture-managed envelope systems. This project will help accelerate the widespread acceptance of a new generation of building materials developed specifically with the intent of reducing the carbon footprint of buildings. We have produced a database of hygrothermal transport properties on low embodied carbon building materials that can be added to energy and durability simulation tools. Properties that were measured include density, heat capacity, thermal conductivity as a function of temperature and relative humidity, moisture dependent permeance, and sorption isotherms as a function of relative humidity. These data sets were measured following consensus national standards using state-of-the-art facilities. The data has been compiled and is being made available to building designers who require these data to assess these new materials in their designs. We will publish the data and seek its addition to reference databases such as the ASHRAE Handbook of Fundamentals.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Engineered Microorganisms for Enhanced Rare Earth Element Bio-mining and Separations (Final Technical Report)

Rare earth elements (REE) are critical ingredients of sustainable energy technologies, but their extraction from ore and separation from one another pose formidable challenges. To solve the challenge of REE supply, we used advanced genomics, high-throughput screening with synthetic REE minerals, and synthetic biology to engineer two sets of exotic microbes to (1) extract REE from ores, spent cracking catalysts, coal ash and electronic waste with high efficiency and selectivity, and (2) to purify REE into single element batches, all under benign conditions without the need of harsh solvents and high temperatures. This work integrated our expertise in systems and synthetic biology (Buz Barstow); rare-earth geochemistry (Esteban Gazel) and mineral synthesis (Megan Holycross); and microsystems engineering (Mingming Wu) by first elucidating the set of rules that predict an organism’s phenotype and then applying them to solve this critical problem in sustainable energy. These new technologies could help to revitalize the US rare earth industry and provide a new source of these critical elements for future energy technologies. We have already had some big success in tech transfer. Two of our team members (postdoctoral fellow Alexa Schmitz and graduate student Sean Medin) were able to study the supply chain for REE in the United States, and identify an opportunity to commercialize our REE mineral-dissolution technology. Alexa and Sean recently founded REEgen, Inc., an REE biomining company. Dr. Schmitz was recently awarded a fellowship from the Activate Foundation to support the first two years of REEgen. Cornell showed its support for this technology and company, and Dr. Schmitz was awarded the Rising Women Innovator’s award. These two awards unlocked support from Cornell’s Praxis Incubator.

58 GEOSCIENCES↗
DOE OSTI2024

An Advanced Pretreatment/Anaerobic Digestion (APAD) Technology for Increased Conversion of Sewage Sludge to Bio-natural Gas in Small-scale Wastewater Plants of less than Five tons Sewage Sludge a Day

The problem today of energy production from sewage sludge at small-scale is that conventional Anaerobic Digestion (AD) as used today at Wastewater Treatment Facilities (WWTF) produces too little energy for warrant use of the biogas. It further leaves 50% or more of the waste behind after the treatment. To overcome this problem, we proposed a novel concept based on Advanced Wet Oxidation & Steam Explosion (AWOEx) of the recalcitrant parts of sewage sludge left behind after AD. We further suggest upgrading biogas to renewable natural gas (RNG) using gaseous fermentation of biogas with hydrogen added by a new methanogen. Overall, the DOE funded Advanced Pretreatment & Anaerobic digestion (APAD) project showed significant improvements over current practice. The project demonstrated that AWOEx followed by AD significantly enhanced the carbon conversion efficiency from 37% to 62%, an increase of 68%. This is far higher than the metric for the specific FOA of an increase of 50%. Besides, the project showed high efficiency of our biological conversion of biogas into RNG when using a new isolate of Methanothermobacter wolfeii resulting in a 100% increased production of a refined biogas with maximum 5% CO2. With both AWOEx pretreatment and biogas upgrading, the project showed a CCE of ca. 83%, far higher than any previous work on sewage sludge. Besides over 200% higher amount of energy in the form of RNG, the APAD concept will reduce disposal cost due to significant reduction in the concentration of final sludge product after APAD. The APAD technology can operate as a bolt-on to a conventional AD plant for improving conversion of the residual organics after AD as done in this DOE project. It can further be implemented as a stand-alone process with AWOEx followed by AD for WWTF’s currently operating without AD.

09 BIOMASS FUELS↗
DOE OSTI2025

High-Performance Nanoparticle-Mediated Surfaces for Bio-medical Applications

CONCLUSIONS Scalability: could reduce produce cost of nanomaterials for widespread application • Nanomaterials can be produced on macro-scale supports, i.e. metal filters, textile, via solution chemistries • Applications: • Antimicrobial and antiviral applications • Capturing contaminants from aqueous environments • Biocompatibility and Toxicity: safety & long-term effects • Airborne Release Fraction and Respirable Fraction must be considered when moieties released in the atmosphere • Evidence for Bioavailability of Au Nanoparticles from Soil and Biodistribution within Earthworms

Murph, Simona E. [Savannah River National Laborato↗
DOE OSTI2025

Using low cost, bio-derived and recycled materials in advanced scalable small- and medium- wind turbine manufacturing

In partnership with Bergey Windpower, this project explored the use of recyclable and recycled materials in small- to medium-wind turbine blades (WTBs). A recyclable epoxy resin and infusible thermoplastic resin were investigated using identical fiber reinforcements and manufacturing practices used as Bergey, and the substitution of continuous virgin glass fiber (GF) layers with recycled nonwoven GF (rGF, NW) mats was trialed. The alternative resins both showed very promising performance in terms of static tensile and flexural behavior as well as thermal properties and fatigue behavior in comparison with that of the incumbent materials used at Bergey. The NW rGF materials, however, were found to be a poor substitute for the continuous GF materials for two primary reasons. Firstly, the NW mats took up significantly more resin than their continuous counterparts, which would increase both the weight and the cost of the WTBs. Additionally, an unexpected reaction occurred between the rGF and epoxy materials that resulted in a highly porous, foamed structure. The foaming phenomenon was not observed with the rGF NW and infusible thermoplastic material, but the resin uptake was still prohibitively high. Based on the results of this study, recyclable infusible resins could be viable candidate materials for Bergey in the future. The foaming reaction with the rGF NW mats could prove highly useful in other applications requiring structural foams and has been used to produce demonstrative sandwich panels.

17 WIND ENERGY↗
DOE OSTI2025

Bio-derived Hydrogen Peroxide Manufacturing from Pulp and Paper Waste (CRADA Final Report)

The Perlumi project team worked on developing a novel route to hydrogen peroxide (H 2 O 2 ) using methanol as the starting material. Global H 2 O 2 annual production is around 4.5 billion kilos, and is valued around $\$2.5$ billion dollars. The pulp and paper industry specifically buys about $\$1.5$ billion of H 2 O 2 in aggregate as a green alternative to chlorine containing compounds for pulp and paper bleaching.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Bio-Based Acetonitrile Production

The purpose of this CRADA is to produce at minimum 100 g of specified (99.8 wt%) acetonitrile from the nitrilation reaction using commercially available biologically derived acetic acid. This CRADA will also investigate the separation of pullulan from fermentation broth.

09 BIOMASS FUELS↗
DOE OSTI2026

MAT 329: Cost Efficient, Bio-Derivable, and Lightweight Materials for Vehicle's Thermal Energy Management

Objective: Enable lightweight and multifunctional composites by combining CF composites with encapsulated phase-change materials for temperature regulation. Impacts: The multifunctionality of the composites provides benefits over today's aluminum enclosures which could help drive CF composites adoption; and By implementing CF composites, battery enclosures can be lightweighted leading to a greater vehicle efficiency.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2023

Geographic coordinates of Populus Trichocarpa genets used in common gardens established and maintained by the Center for Bio energy Innovation. (CBI)

This data set contains the geographic coordinates of the GWAS population described in Tuskan et. al, 2011 and Evans, et. al, 2014. These genotypes have been used in numerous experiments since then, and have been propogated in common gardens. The most recent common garden geo referenced dataset for Davis, California is also available.

Populus Trichocarpa genets locations↗
DOE OSTI2020

Preventing Bio-Bloopers and XFEL Follies: Best Practices from your Friendly Instrument Staff

Serial Femtosecond Crystallography (SFX) at X-ray Free electron Lasers (XFELs) is a relatively new field promising to deliver unparalleled spatial and temporal resolution on biological systems and there dynamics. Over the past decade, though, there have been a handful of results that have truly delivered on these promises. Why? SFX has many paradigm shifting techniques not seen in typical structural biology arenas, such as creating a concentrated slurry of microcrystals rather than a handful of loopable prisms worthy of a catalog photo. Then taking that slurry and high speed jetting them towards the vacuum or helium interation region to destroy less than 1% of your sample and waste the other 99. The literature is full of techniques and methods promising to cure what ails your experiment, yet as an instrument scientist will tell you –and a first author might admit after a few drinks at the conference happy hour—is that there are a lot more failures than the success we published, results may vary. We will walk through a best practices on how to prepare your sample and chose a sample delivery technique that will amerliorate your studies rather than undermine your hardwork and hopefully lead to better experimental planning and execution, inching you closer to that scientific goal and that call from Stockholm. This will be written in a more editorialized fashion and is meant to give the reader an idea of what to try or how they should be thinking. Welcome to SFX, now what?

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Agriculture’s Potential Regional Economic Contributions to the United States Economy When Supplying Feedstock to the Bio-Economy

The economic impact of obtaining biomass could become significant to U.S. rural economies via the establishment of a bioeconomy. In 2023, the Bioenergy Technologies Office (BETO) and Oak Ridge National Laboratory provided a road map to obtain over a billion tons of biomass for conversion to bioenergy and other products. Using information from this roadmap, this study estimates the potential positive and negative economic impacts that occur because of land use change, along with increased technological advances. This is achieved by using the input–output model, IMPLAN, and impacting 179 Bureau of Economic Analysis regions in the conterminous United States. Biomass included in the analysis comprises dedicated energy crops, crop residues, and forest residues. The analysis found that managing pastures more intensively could result in releasing land to produce dedicated energy crops on 30.8 million hectares, resulting in the production of 361 million metric tons of biomass. This, coupled with crop residues from barley, corn, oats, sorghum, and wheat (162 million metric tons), plus forest residues (41 million metric tons), provide 564 million dry metric tons of biomass. Assuming the price for biomass in 2023 dollars was USD 77 per dry metric-ton, this additional production results in an economic benefit for the nation of USD 619 billion, an increase from the Business As Is scenario (Baseline) of almost USD 100 billion per year, assuming a mature biomass industry. An additional 700,000 jobs are required to grow, harvest/collect, and transport the biomass material from the land.

ForSEAM↗