Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Bi”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Persistent Josephson tunneling between Bi 2 Sr 2 CaCu 2 O 8 + x flakes twisted by 45 ° across the superconducting dome

There is a heated debate on the Josephson effect in twisted Bi 2 Sr 2 CaCu 2 O 8+x flakes. Recent experimental results suggest the presence of either anomalously isotropic pairing or exotic d+id-wave pairing, in addition to the commonly believed d-wave one. Here, we address this controversy by fabricating ultraclean junctions with uncompromised crystalline quality and stoichiometry at the junction interfaces. In the optimally doped regime, we obtain prominent Josephson coupling (2-4 mV) in multiple junctions with the twist angle of 45°, in sharp contrast to a recent report that shows two orders of magnitude suppression around 45° from the value at 0°. We further extend this study to the previously unexplored overdoped regime and observe pronounced Josephson tunneling at 45° together with Josephson diode effect up to 50 K. In conclusion, our work helps establish the persistent presence of an isotropic pairing component across the entire superconducting phase diagram.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Exchange coupling in $\mathrm{Bi_2}$ $\mathrm{Se_3}$ / $\mathrm{EuSe}$ heterostructures and evidence of interfacial antiferromagnetic order formation

Spatial confinement of electronic topological surface states (TSSs) in topological insulators poses a formidable challenge because TSSs are protected by time-reversal symmetry. In previous works formation of a gap in the electronic spectrum of TSSs has been successfully demonstrated in topological insulator/magnetic material heterostructures, where ferromagnetic exchange interactions locally lift the time-reversal symmetry. Here we report experimental evidence of exchange interaction between a topological insulator $\mathrm{Bi_2}$ $\mathrm{Se_3}$ and a magnetic insulator EuSe. Spin-polarized neutron reflectometry reveals a reduction of the in-plane magnetic susceptibility within a 2 nm interfacial layer of EuSe, and the combination of superconducting quantum interference device (SQUID) magnetometry and Hall measurements points to the formation of an interfacial layer with a suppressed net magnetic moment. This suppressed magnetization survives up to temperatures five times higher than the Néel temperature of EuSe. Its origin is attributed to the formation of an interfacial antiferromagnetic state. Abrupt resistance changes observed in high magnetic fields are consistent with antiferromagnetic domain reconstruction affecting transport in a TSS via exchange coupling. Importantly, the high-temperature local control of TSSs with zero net magnetization unlocks new opportunities for the design of electronic, spintronic, and quantum computation devices, ranging from quantization of Hall conductance in zero fields to spatial localization of non-Abelian excitations in superconducting topological qubits.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Hybridization of Bogoliubov Quasiparticles between Adjacent CuO 2 Layers in the Triple-Layer Cuprate Bi 2 Sr 2 Ca 2 Cu 3 O 10 + δ Studied by Angle-Resolved Photoemission Spectroscopy

Hybridization of Bogoliubov quasiparticles (BQPs) between the CuO 2 layers in the triple-layer cuprate high-temperature superconductor Bi 2 Sr 2 Cu 2 Cu 3 O 10+δ is studied by angle-resolved photoemission spectroscopy (ARPES). In the superconducting state, an anticrossing gap opens between the outer- and inner-BQP bands, which we attribute primarily to interlayer single-particle hopping with possible contributions from interlayer Cooper pairing. We find that the d-wave superconducting gap of both BQP bands smoothly develops with momentum without an abrupt jump in contrast to a previous ARPES study. Hybridization between the BQPs also gradually increases in going from the off nodal to the antinodal region, which is explained by the momentum dependence of the interlayer single-particle hopping. As possible mechanisms for the enhancement of the superconducting transition temperature, the hybridization between the BQPs as well as the combination of phonon modes of the triple CuO 2 layers and spin fluctuations represented by a four-well model are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Ferroelectric Semimetals with α-Bi/SnSe van der Waals Heterostructures and Their Topological Currents

We show that proximity effects can be utilized to engineer van der Waals heterostructures (vdWHs) displaying semimetallic spin-ferroelectricity locking, where ferroelectricity and semimetallic spin states are confined to different layers, but are correlated by means of proximity effects. Our findings are supported by first principles calculations involving α-Bi/SnSe bilayers. We show that such systems support ferroelectrically switchable nonlinear anomalous Hall effect originating from large Berry curvature dipoles as well as direct and inverse spin Hall effects with giant bulk spin-charge interconversion efficiencies. In conclusion, the giant efficiencies are consequences of the proximity-induced semimetallic nature of low energy electron states, which are shown to behave as two-dimensional pseudo-Weyl fermions by means of symmetry analysis and first principles calculations as well as direct angle-resolved photoemission spectroscopy measurements.

2-dimensional systems↗
DOE OSTI2020

Photon energy and polarization-dependent electronic structure of Cr-doped Bi 2 Se 3

In this article, we report a comparative study of the electronic structure of Cr-doped and pristine Bi 2 Se 3 . Circular dichroism and photon-energy-dependent angle-resolved photoemission experiments were performed. Even though the surface states seen on the Cr-doped samples are gapped, they exhibit strong circular dichroism, for which we provide its origin in accordance with the nontrivial band structure of the bulk. We note the surface electronic structure measurements with linear and circular polarized light show signatures that the orbital composition of the surface states is changed with Cr doping. Our observations not only provide further spectroscopic information about topological materials, but also promotes an alternative experimental tool to control their spin-orbital texture.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Thermomagnetic properties of Bi 2 Te 3 single crystal in the temperature range from 55 K to 380 K

Magnetothermoelectric transport provides an understanding of coupled electron-hole-phonon current in topological materials and has applications in energy conversion and cooling. In this paper, we study the Nernst coefficient, the magneto-Seebeck coefficient, and the magnetoresistance of single-crystalline Bi 2 Te 3 under external magnetic field in the range of –3T to 3T and in the temperature range of 55 K to 380 K. Moreau's relation is employed to justify both the overall trend of the Nernst coefficient and the temperature at which this coefficient changes sign. We observe a nonlinear relationship between the Nernst coefficient and the applied magnetic field in the temperature range of 55 K to 255 K. An increase in both the Nernst coefficient and the magneto-Seebeck coefficient is observed as the temperature is reduced which can be attributed to the increased mobility of the carriers at lower temperatures. First-principles density functional theory calculations were carried out to physically model the experimental data including electronic and transport properties. Simulation findings agreed with the experiments and provide a theoretical insight to justify the measurements.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Observation of a smoothly tunable Dirac point in Ge ( Bi x Sb 1 - x ) 2 Te 4

State-of-the-art topological devices require the use of topologically protected surface states to drive electronic transport. Here, we examine a tunable topological system, Ge(Bi x Sb 1-x ) 2 Te 4 , for a range of $\mathcal{x}$ values from 0 to 1, using a combination of Fourier transform scanning tunneling spectroscopy and angle-resolved photoemission spectroscopy. Our results show that the Dirac point shifts linearly with $\mathcal{x}$, crossing the Fermi energy near $\mathcal{x}$=0.7. This observation of a smoothly tunable, isolated Dirac point crossing through the topological transport regime and having strong linear dependence with substitution can be critical for future topological spintronics applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Highly tunable band inversion in AB 2 X 4 (A=Ge, Sn, Pb; B=As, Sb, Bi; X=Se, Te) compounds

Topological materials have been discovered so far largely by searching for existing compounds in crystallographic databases, but there are potentially new topological materials with desirable features that have not been synthesized. One of the desirable features is high tunability resulting from the band inversion with a very small direct band gap, which can be tuned by changes in pressure or strain to induce a topological phase transition. Here, using density-functional theory (DFT) calculations, we have studied the septuple layered AB 2 X 4 series compounds, where A=(Ge, Sn and Pb), B=(As, Sb and Bi), and X=(Se and Te). With the DFT thermodynamic stability validated by the already-reported compounds in these series, we predict stable Se compounds, which are not found in crystallographic database. Among them, we find that GeBi 2 Se 4 and GeSb 2 Se 4 having a small direct band gap at the Z point are very close to a strong topological insulator, which can be tuned by a moderate pressure to induce the band inversion. Importantly, the topological features with the small direct band gap are well isolated in both momentum and energy windows, which offers high tunability for studying the topological phase transition.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Ultrafast Raman probe of the photoinduced superconducting to normal state transition in the cuprate Bi 2 ⁢Sr 2 ⁢CaCu 2 ⁢O 8+𝛿

Here, we report an ultrafast Time-Resolved Raman scattering study of the out-of-equilibrium photoinduced dynamics across the superconducting to normal state phase transition of the cuprate Bi 2 ⁢Sr 2⁢ CaCu 2 ⁢O 8+𝛿 . Using the polarization-resolved momentum space selectivity of Raman scattering, we track the superconducting condensate destruction and recovery dynamics with subpicoseconds time resolution in the antinodal region of the Fermi surface where the superconducting gap is maximum. Leveraging ultrafast Raman thermometry, we find a significant dichotomy between the superconducting condensate and the quasiparticle temperature dynamics near the antinodes, which cannot be framed in terms of a single effective electron temperature. The present work demonstrates the ability of Time-Resolved Raman scattering to selectively probe out-of-equilibrium pathways of different electronic subdegrees of freedom during a photoinduced phase transition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Structure evolution of Bi 4 O 7 under high pressure

X-ray diffraction and Raman spectroscopy measurements were used to study the structure evolution of Bi 4 O 7 during compression. Two isostructural phase transitions were observed under high pressure, with the first transition to phase II occurring at approximately 3.0 (2) GPa and the second to phase III occurring at approximately 13.0 (5) GPa. The pressure–volume ( P – V ) curve was found to be discontinuous at those two pressure transition boundaries. By fitting the P – V curves in three different stages, the bulk moduli were estimated to be approximately 101 (2), 68 (2) and 172 (3) GPa. Such large differences in the bulk moduli confirm two isostructural phase changes in the three stages. An irreversible amorphization process was found to start at approximately 20 (1) GPa, and the sample gradually becomes fully amorphous during compression at 30 (1) GPa.

Chemistry↗
DOE OSTI2020

20-kW Bi-directional Wireless Power Transfer System with Energy Storage System Connectivity

The severity of the economic impact caused by grid outages has been the driving factor for creating innovative solutions that increases interest for the deployment of distributed energy resources to reduce the impact of grid outages. This study presents a novel way of providing export power using bi-directional wireless power transfer (WPT) systems for ac grid side power and mobile energy storage systems (ESSs) connectivity. The proposed concept here interfaces the EV batteries to the AC grid and also can redirect the power from the stationary ESS to grid, to EV batteries, or both simultaneously; providing the capabilities of an uninterrupted power supply (UPS). Results demonstrate the performance and the functionality of the system with overall efficiencies 93% to 97%, depending on the operating mode.

Onar, Omer↗
DOE OSTI2023

Bi-Level Linear Programming Model for Automatic Load Shedding: A Distributed Wide-Area Measurement System-based Solution

Load shedding is currently implemented as a two-step based approach. In the first step, manual load shedding is taken place, were system operators, using estimates, inform distribution utilities of predicted stressful conditions. Information provided include the potential use of energy reserves, as well as load shedding amount. In a second step, automatic load shedding is done. The latter is realized using protection relays. While considering frequency variation, pre-defined values of load to be shed and correspondent number of stages for such to be realized are transformed into relay settings. Under-frequency protection relays use only local measurements towards decision making, thus operate in a decentralized architecture. Decision making is done in milliseconds plus breaker time. While this approach has provided much system reliability, considering the new smart grid paradigm, where system dynamics are much faster due to increasing renewable resources penetration, in some operating conditions it will generate sub-optimal solutions, such as islanding. Phasor measurement units provide a source of information which can be useful for this problem. Centralized architecture-based solutions for automatic load shedding, as present in the state-of-the-art, require though total processing times which are not acceptable for real-life implementation. In this work, considering the above, a bi-level linear programming model is presented. The model is implemented considering a distributed architecture while leveraging phasor measurement units data. The upper-level model estimates the current system state. Results of this model are embedded in a lower-level model, which decision variables are the location and load value to be shed. Easy-to-implement model, built-on the classic weighted least squares solution, highlight potential aspects towards real-life applications.

Bretas, Arturo Suman↗
DOE OSTI2023

Towards Smart Grids Enhanced Situation Awareness: A Bi-Level Quasi-Static State Estimation Model

Smart Grid situational awareness is provided by Energy Management Systems. A core process of these systems is State Estimation. The great majority of state estimators model the Smart Grid through a set of nonlinear algebraic equations, named the measurement model. Problem formulation considers the Gauss solution. Several model improvements have been presented regarding the Gauss solution, aiming between others to provide measurement noise robustness to the state estimation process. While considerable effort has been focused on such developments, state estimation is still constrained by the implicit modelling error, and thus inevitably vulnerable to cyber-threats. In this work, a state estimation bi-level formal model is presented towards Smart Grids enhanced situational awareness considering the concepts of synthetic measurements and innovation. Comparative test results with the state-of-the-art on the IEEE 14-bus system are presented highlighting improved situational awareness to bad data. Easy-to-implement model, without hard-to-derive parameters, built-on the classic weighted least squares solution, highlight potential aspects for real-life implementation.

cyber security↗
DOE OSTI2023

Distributed Load Shedding Application Architecture and Bi-Level Predictive Estimator Algorithm

Increasing penetrations of distributed renewables are decreasing the effectiveness of traditional decentralized under-frequency load shedding (UFLS) schemes. As more distribution circuits begin to back-feed the transmission system, operation of traditional UFLS may exacerbate frequency instability. This paper presents the conceptual framework for a data-rich environment to coordinate UFLS across multiple distribution providers based on the laminar coordination framework in order to ensure optimal adaptive setting of UFLS relays. Communication and control are enabled through a distributed implementation of the IEC 61968-1 Common Information Model message bus structure. In addition to the proposed architecture, a novel adaptive UFLS scheme informed by a bi-level state estimator to create optimal relay setpoints is introduced. Initial simulation results are presented for the IEEE 14-bus test system on scenarios leading to mis-operation of traditional UFLS.

Anderson, Alexander A.↗
DOE OSTI2023

Bi-Level Adaptive Storage Expansion Strategy for Microgrids Using Deep Reinforcement Learning

Battery energy storage (BES) is a versatile resource for the secure and economic operation of microgrids (MGs). Prevailing stochastic optimization-based approaches for BES expansion planning for MGs are computationally complicated. This work proposes a data-driven bi-level multi-period BES expansion planning framework to determine the siting, sizing, and timing of BES installations. The proposed planning framework unifies deep reinforcement learning (DRL) and linear programming, thereby decoupling the determinations for the integer and continuous decision variables in two time scales, respectively. In the upper level, a rainbow DRL agent with quantile regression is trained to provide dynamic planning policies to accommodate stochastic renewable energy resources (RESs), load, and battery price changes efficiently. Further, the lower level computes the optimal operation of MGs with frequency constraints to hedge the islanding contingency. The two levels communicate with one another by exchanging storage configuration and operating expenses in order to accomplish the shared goal of minimizing investment and operation costs. Comparative case studies on an MG are carried out to demonstrate the superiority of the proposed DRL-based solution to the mixed-integer linear programming counterpart on efficiency, scalability, and adaptability.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2022

Reliability-Informed Economic and Energy Evaluation for Bi-Level Design for Remanufacturing: A Case Study of Transmission and Hydraulic Manifold

Abstract Design for remanufacturing (DfRem) is one attractive strategy that encourages the reuse of a product and extends the product's life cycle. Traditional design processes often only consider product reliability at an early design stage. However, from the perspective of environmental sustainability, it is becoming increasingly important to evaluate the long-term economic and environmental impacts of design decisions during early-stage design. We propose a bi-level DfRem framework consisting of system-level reusability allocation and component-level design tradeoff analysis, considering reliability and product warranty policy. First, a system-level reusability allocation problem aims at a theoretical exploration of the design space where all the components comprising the system are allocated certain reuse rates to achieve target energy savings with minimum cost. Following the theoretical exploration at the system level, a component-level analysis looks at practical design options for each component and trades-off between the overall cost and energy consumption for multiple remanufacturing cycles. Both levels of the framework require modeling component reuse for multiple remanufacturing cycles, which we achieve by using a branched power-law model that provides probabilistic scenarios of reusing the component or replacing it with a new part. We demonstrate the utility of this framework with the case study of an infinitely variable transmission (IVT) used by some agricultural machines manufactured by John Deere and show snapshots of a prototype software tool that we developed for easy use by designers.

Engineering↗
DOE OSTI2023

Multi-Objective Optimization of a Bi-Metal High-Temperature Recuperator for Application in Concentrating Solar Power

Supercritical CO 2 closed Brayton cycles are a major candidate for future power cycle designs in concentrating solar power applications, with high-temperature recuperators playing an essential role in realizing their high thermal efficiency. Here, printed circuit heat exchangers (PCHEs) are often chosen for this role due to their thermal-hydraulic and mechanical performance at high temperatures and pressures, all while remaining compact. However, PCHEs can be costly because of the high-performance materials demanded in these applications, and the heat exchanger internal geometry is restricted by their manufacturing process. Additively manufactured heat exchangers can address both of these shortcomings. This work proposes a modular bi-metal high-temperature recuperator with integrated headers to be produced with additive manufacturing. Beginning with existing PCHE channel geometries, a 1D heat exchanger model is developed. Then, multi-objective optimization is used to maximize the heat transfer effectiveness of a lab-scale device while limiting its size. Two distinct channel geometries emerge from the optimization. Optimal designs achieve up to 88% effectiveness with negligible pressure drop. Deterioration of effectiveness due to axial conduction of heat in the heat exchanger walls is found to be a notable problem for lab-scale PCHEs, and the optimal designs obtained here minimize its detrimental effects. A sensitivity analysis reveals that the effectiveness of the recuperator is much less sensitive to variation in mass flowrate in off-design operation when axial conduction is significant, while increasing the length of the device easily increases effectiveness.

14 SOLAR ENERGY↗
DOE OSTI2020

Epitaxial growth of Bi 2 Se 3 in the (0015) orientation on GaAs (001)

Here we present that materials with van der Waals bonding show exotic physics and may have applications in a variety of areas including new optoelectronic devices, spintronic devices, and as quantum materials. To date, control over the morphology and surface orientation of thin films of these materials without substrate pretreatment has been difficult. In this paper, the authors report the growth of Bi 2 Se 3 on GaAs (001) substrates. By controlling the growth conditions and adatom mobility, the authors are able to obtain epitaxial growth in the (0015) orientation without substrate prepatterning. Although the growth window is small, this demonstration opens the door for future control of the orientation of van der Waals materials through control of parameters during growth and via interaction with the substrate.

36 MATERIALS SCIENCE↗