Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BURN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Effects of H{sub 2} or CO{sub 2} addition, equivalence ratio, and turbulent straining on turbulent burning velocities for lean premixed methane combustion

Using hydrogen or carbon dioxide as an additive, we investigate the bending effect of turbulent burning velocities (S{sub T}/S{sub L}) over a wide range of turbulent intensities (u{sup '}/S{sub L}) up to 40 for lean premixed methane combustion at various equivalence ratios ({phi}), where S{sub L} is the laminar burning velocity. Experiments are carried out in a cruciform burner, in which a sizable downward-propagating premixed CH{sub 4}/diluent/air flame interacts with intense isotropic turbulence in the central region without influences of ignition and unwanted turbulence from walls. Simultaneous measurements using the pressure transducer and pairs of ion-probe sensors at various positions of the burner show that effects of gas velocities and pressure rise due to turbulent combustion on S{sub T} of lean CH{sub 4}/H{sub 2}/air flames can be neglected, confirming the accuracy of the S{sub T} data. Results with increasing hydrogen additions ({delta}=10, 20, and 30% in volume) show that the bending of S{sub T}/S{sub L} vs u{sup '}/S{sub L} plots is diminished when compared to data with {delta}=0, revealing that high reactivity and diffusivity of hydrogen additives help the reaction zone remaining thin even at high u{sup '}/S{sub L}. In contrast, the bending effect is strongly promoted when CO{sub 2} is added due to radiation heat losses. This leads to lower values of S{sub T}/S{sub L} at fixed u{sup '}/S{sub L} and {phi}, where the slope n can change signs from positive to negative at sufficiently large u{sup '}/S{sub L}, suggesting that the reaction zone is no longer thin. All S{sub T} data with various {delta} can be well approximated by a general correlation (S{sub T}-S{sub L})/u{sup '}=0.17Da{sup 0.43}, covering both corrugated flamelet and distributed regimes with very small data scatter, where Da is the turbulent Damkoehler number. These results are useful in better understanding how turbulence and diluents can influence the canonical structures of turbulent premixed flames and thus turbulent burning rates. (author)

03 NATURAL GAS↗

Laminar burning velocities at high pressure for primary reference fuels and gasoline: Experimental and numerical investigation

Spherical flames of n-heptane, iso-octane, PRF 87 and gasoline/air mixtures are experimentally investigated to determine laminar burning velocities and Markstein lengths under engine-relevant conditions by using the constant volume bomb method. Data are obtained for an initial temperature of 373 K, equivalence ratios varying from {phi}=0.7 to {phi}=1.2, and initial pressures from 10 to 25 bar. To track the flame front in the vessel a dark field He-Ne laser Schlieren measurement technique and digital image processing were used. The propagating speed with respect to the burned gases and the stretch rate are determined from the rate of change of the flame radius. The laminar burning velocities are obtained through a linear extrapolation to zero stretch. The experimentally determined Markstein numbers are compared to theoretical predictions. A reduced chemical kinetic mechanism for n-heptane and iso-octane was derived from the Lawrence Livermore comprehensive mechanisms. This mechanism was validated for ignition delay times and flame propagation at low and high pressures. In summary an overall good agreement with the various experimental data sets used in the validation was obtained. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Transient burning of a convective fuel droplet

The transient burning of an n-octane fuel droplet in a hot gas stream at 20 atmosphere pressure is numerically studied, with considerations of droplet regression, deceleration due to the drag of the droplet, internal circulation inside the droplet, variable properties, non-uniform surface temperature, and the effect of surface tension. An initial envelope flame is found to remain envelope in time, and an initial wake flame is always transitioned into an envelope flame at a later time, with the normalized transition delay controlled by the initial Reynolds number and the initial Damkohler number. The initial flame shape is primarily determined by the initial Damkohler number, which has a critical value of Da{sub 0}=1.02. The burning rates are modified by the transition, and are influenced by the intensity of forced convection which is determined by initial Reynolds number. The influence of surface tension is also studied as the surface temperature is non-uniform. Surface tension affects the liquid motion at the droplet surface significantly and affects the change of surface temperature and burning rate modestly. The influence of surface tension generally increases with increasing initial Reynolds number within the range without droplet breakup. We also studied cases with constant relative velocity between the air stream and the droplet. The results show that in these cases the initial envelope flame still remains envelope, but the evolution from an initial wake flame to an envelope flame is inhibited. Validation of our analysis is made by comparing with a published porous-sphere experiment Raghavan et al. (2005) which used methanol fuel. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental and modeling studies of a biofuel surrogate compound: laminar burning velocities and jet-stirred reactor measurements of anisole

Lignocellulosic biomass is a promising alternative fuel source which can promote energy security, reduce greenhouse gas emissions, and minimize fuel consumption when paired with advanced combustion strategies. Pyrolysis is used to convert lignocellulosic biomass into a complex mixture of phenolic-rich species that can be used in a transportation fuel. Anisole (or methoxybenzene) can be used as a surrogate to represent these phenolic-rich species. Anisole also has attractive properties as a fuel component for use in advanced spark-ignition engines because of its high blending research octane number of 120. Presented in the current work are new measurements of laminar burning velocities, jet-stirred reactor (JSR) speciation of anisole/O 2 /N 2 mixtures, and the development and validation of a detailed chemical kinetic mechanism for anisole. Homogeneous, steady state, fixed gas temperature, perfectly stirred reactor CHEMKIN simulations were used to validate the mechanism against the current JSR measurements and published JSR experiments from CNRS-Nancy. Pyrolysis and oxidation simulations were based on the experimental reactant compositions and thermodynamic state conditions including P = 1 bar and T = 675–1275 K. The oxidation compositions studied in this work span fuel-lean (φ = 0.5), stoichiometric, and fuel rich (φ = 2.0) equivalence ratios. Laminar burning velocities were measured on a heat flux stabilized burner at an unburnt T = 358 K, P = 1 bar and simulated using the CHEMKIN premixed laminar flame speed module. Ignition delay times of anisole were then simulated at conditions relevant to advanced combustion strategies. Current laminar burning velocity measurements and predicted ignition delay times were compared to gasoline components (e.g., n-heptane, iso-octane, and toluene) and gasoline surrogates to highlight differences and similarities in behavior. Reaction path analysis and sensitivity analysis were used to explain the pathways relevant to the current studies. Under pyrolysis and oxidative conditions, unimolecular decomposition of anisole to phenoxy radicals and methyl radicals was found to be important due to the relatively low bond strength between the oxygen and methyl group, ~65 kcal/mol. Finally, reactions of these abundant phenoxy radicals with O 2 were found to be critical to accurately reproduce anisole's reactivity.

10 SYNTHETIC FUELS↗

In situ observations of reacting Al/Fe 2 O 3 thermite: Relating dynamic particle size to macroscopic burn time

Time-resolved x-ray imaging is used to capture high-resolution images of the Al/Fe 2 O 3 thermite reaction as it proceeds in an extended burn tube. The observed thermite reaction products are generally large, multi-phase composite particles. Image processing algorithms are developed to extract a continuous record of composite particle size as a function of time and distance from the ignition point. Small particles are observed immediately after ignition, followed by a rapid increase in particle size and a gradual decline toward late times. Correlating the dynamic particle size with visible light emission from the reaction, we propose a two-stage mechanism where the combination of early ignition and delayed expansion causes the material closest to the ignition point to undergo substantial coalescence before it begins moving down the tube. We also identify two mechanisms that may contribute to particle size refinement at late times, both based on the collapse of large gas bubbles that are observed preferentially in particles at earlier times. A new approach to extracting burn times from luminous intensity data is explored, and we find that a more nuanced analysis of burn time and luminous intensity may help to improve reactivity assessments when data from in situ studies is unavailable.

36 MATERIALS SCIENCE↗

The effects of composition on the burning velocity and NO formation in premixed flames of C{sub 2}H{sub 4} + O{sub 2} + N{sub 2}

Experimental measurements of the adiabatic burning velocity and NO formation in C{sub 2}H{sub 4}+ O{sub 2}+ N{sub 2} flames are presented. The oxygen content in synthetic air varied from 18% down to 14%. Non-stretched flames were stabilized on a perforated plate burner at 1 atm. A heat flux method was used to determine the burning velocities under the conditions when the net heat loss of the flame is zero. Adiabatic burning velocities of ethylene + nitrogen + oxygen mixtures were found in good agreement with the modeling. Sampling measurements were performed at 10-20 mm from the burner and concentrations of stable species, CO, CO{sub 2}, O{sub 2} and NO{sub x} were recorded. The concentrations of CO, CO{sub 2} and O{sub 2} were compared with the modeling to reveal that the range of the flame conditions was less affected by the ambient air entrainment. The dependencies of [NO] as a function of equivalence ratio clearly possess two maxima: in stoichiometric mixtures due to Zeldovich thermal-NO mechanism and in rich mixtures at equivalence ratio close to 1.4 due to Fenimore prompt-NO mechanism. Dilution by nitrogen decreases [NO] at any equivalence ratio. Numerical predictions of the concentrations of NO in a post-flame zone of lean and stoichiometric flames are in good agreement with the experiments when downstream heat losses to the environment were taken into account. The predictions of the Konnov mechanism in rich ethylene flames reproduce trends of the experimental data with an under-prediction of about 10-15 ppm. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Laminar burning velocity predictions for C 1 and C 2 hydrofluorocarbon refrigerants with air

Due to their high global warming potentials, many existing working fluids are being phased out. Their replacements will often be slightly flammable, and the burning velocity of refrigerant-air mixtures is a metric for ranking their flammability. To allow estimates of the flammability of new blends of agents, predictive tools for the burning velocity are being developed and require a kinetic mechanism. A hydrofluorocarbon (HFC) mechanism was developed 20 years ago to describe hydrocarbon-air flames with added trace amounts of hydrofluorocarbon fire retardants. In the present work, the mechanism has been updated slightly to include new HFC compounds, new rate data. The modified mechanism is used to predict steady, planar, 1D, unstretched burning velocities for mixtures of air with one- and two-carbon saturated HFC compounds R41 (CH 3 F), R32 (CH 2 F 2 ), R161 (C 2 F 5 H), R152 (CH 2 F-CH 2 F), R152a (CH 3 -CHF 2 ), R143 (CH 2 F-CHF 2 ), R143a (CH 3 -CF 3 ), R134 (CHF 2 -CHF 2 ), and R134a (CH 2 F-CF 3 ), for which existing experimental data were available.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simulation of differential die-away instrument’s response to asymmetrically burned spent nuclear fuel

Here, previous simulation studies of Differential Die–Away (DDA) instrument’s response to active interrogation of spent nuclear fuel from a pressurized water reactor (PWR) yielded promising results in terms of its capability to accurately measure or estimate basic spent fuel assembly (SFA) characteristics, such as multiplication, initial enrichment (IE) and burn-up (BU) as well as the total plutonium content. These studies were however performed only for a subset of idealized SFAs with a symmetric BU with respect to its longitudinal axis. Therefore, to complement the previous results, additional simulations have been performed of the DDA instrument’s response to interrogation of asymmetrically burned spent nuclear fuel in order to determine whether detailed assay of SFAs from all 4 sides will be necessary in real life applications or whether a cost and time saving single sided assay could be used to achieve results of similar quality as previously reported in case of symmetrically burned SFAs.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Quantitative IR Spectrum and Vibrational Assignments for Glycolaldehyde Vapor: Glycolaldehyde Measurements in Biomass Burning Plumes

Glycolaldehyde (GA, 2-hydroxyethanal, C2H4O2) is a semi-volatile molecule of atmospheric importance, recently proposed as a precursor in the formation of aqueous-phase secondary organic aerosol (SOA). There are few methods to measure glycolaldehyde vapor, but infrared spectroscopy has been used successfully. Using vetted protocols we have completed the first assignment of all fundamental vibrational modes and derived quantitative IR absorption band strengths using both neat and pressure-broadened GA vapor. Even though GA is problematic due to its propensity to both dimerize and condense, our intensities agree well with the few previously published values. Using the reference ν10 band Q-branch at 860.51 cm-1, we have also determined GA mixing ratios in biomass burning plumes generated by field and laboratory burns of fuels from the southeastern and southwestern United States, including the first field measurements of glycolaldehyde in smoke. The GA emission factors were anti-correlated with modified combustion efficiency confirming release of GA from smoldering combustion. The GA emission factors (g of GA emitted per kg dry biomass burned on a dry mass basis) had a low dependence on fuel type consistent with the production mechanism being pyrolysis of cellulose. GA was emitted at 0.23 ± 0.13% of CO from field fires and we calculate that it accounts for ~18% of the aqueous-phase SOA precursors that we were able to measure.

Glycolaldehyde, infrared, biomass burning, FTIR, I↗

Direct and semidirect aerosol effects of Southern African biomass burning aerosol

The direct and semi-direct radiative effects of biomass burning aerosols from Southern African fires during July-October are investigated using 20 year runs of the Community Atmospheric Model (CAM) coupled to a slab ocean model. The aerosol optical depth is constrained using observations in clear skies from MODIS and for aerosol layers above clouds from CALIPSO. Over the ocean, where the absorbing biomass burning aerosol layers are primarily located above cloud, negative top of atmosphere (TOA) semi-direct radiative effects associated with increased low cloud cover dominate over a weaker positive all-sky direct radiative effect (DRE). In contrast, over the land where the aerosols are often below or within cloud layers, reductions in cloud liquid water path (LWP) lead to a positive semi-direct radiative effect that dominates over a near-zero DRE. Over the ocean, the cloud response can be understood as a response to increased lower tropospheric stability (LTS) which is caused both by aerosol absorptive warming in overlying layers and surface cooling in response to direct aerosol forcing. The ocean cloud changes are robust to changes in the cloud parameterization (removal of the hard-wired dependence of clouds on LTS), suggesting that they are physically realistic. Over land where cloud cover changes are minimal, decreased LWP is consistent with weaker convection driven by increased static stability. Over the entire region the overall TOA radiative effect from the biomass burning aerosols is almost zero due to opposing effects over the land and ocean. However, the surface forcing is strongly negative requiring a reduction in precipitation. This is primarily realized through reductions in convective precipitation on both the southern and northern flanks of the convective precipitation region spanning the equatorial rainforest and the ITCZ in the southern Sahel. The changes are consistent with the low-level aerosol forced cooling pattern. The results highlight the importance of semi-direct radiative effects and precipitation responses for determining the climatic effects of aerosols in the African region.

09 BIOMASS FUELS↗

Emission and transport of cesium-137 from boreal biomass burning in the summer of 2010

While atmospheric concentrations of cesium-137 have decreased since the nuclear testing era, resuspension of Cs-137 during biomass burning provides an ongoing emission source. The summer of 2010 was an intense biomass burning season in western Russia, with high levels of particulate matter impacting air quality and visibility. A radionuclide monitoring station in western Russia shows enhanced airborne Cs-137 concentrations during the wildfire period. Since Cs-137 binds to aerosols, satellite observations of aerosols and fire occurrences can provide a global-scale context for Cs-137 emissions and transport during biomass burning events.

09 BIOMASS FUELS↗

Southwestern U.S. Biomass Burning Smoke Hygroscopicity: The Role of Plant Phenology, Chemical Composition, and Combustion Properties

Biomass burning emissions have substantially increased with continued warming and drying in the southwestern U.S., impacting air quality and atmospheric processes. To better quantify impacts of biomass burning aerosols, an extensive laboratory study of fresh smoke emissions was conducted at Los Alamos National Laboratory. Laboratory burn experiments with selected native and invasive southwestern U.S. fuels were used to elucidate the role of fuel type, chemical composition, and ignition method on the hygroscopicity of smoke. Here we focus on a custom controlled relative humidity (RH) nephelometry system using the direct measurement of aerosol light scattering with two nephelometers—one at dry conditions and one at a controlled high RH (RH ~ 85%). Aerosol hygroscopicity was highly variable with the enhancement in light scattering coefficient in the range of 1.02 < f (RH = 85%) < 2.1 and corresponding to the kappa parameter (κ neph ) ranging from ~0 to 0.18. Hygroscopicity is determined primarily by the fuel's inorganic ion content. For example, invasive halophytes with high inorganic salt content exhibit much greater water uptake than native coniferous species with low inorganic content. Combustion temperature and phase, flaming or smoldering, play a secondary role in the water uptake of smoke. High–temperature ignition methods create flaming conditions that enhance hygroscopicity while lower–temperature smoldering conditions diminish hygroscopicity. Our results construct an empirical relation between κ neph and the inorganic content of the fuel and smoke to predict water uptake.

54 ENVIRONMENTAL SCIENCES↗

Production of Secondary Organic Aerosol During Aging of Biomass Burning Smoke From Fresh Fuels and Its Relationship to VOC Precursors

After smoke from burning biomass is emitted into the atmosphere, chemical and physical processes change the composition and amount of organic aerosol present in the aged, diluted plume. During the fourth Fire Lab at Missoula Experiment, we performed smog-chamber experiments to investigate formation of secondary organic aerosol (SOA) and multiphase oxidation of primary organic aerosol (POA). We simulated atmospheric aging of diluted smoke from a variety of biomass fuels while measuring particle composition using high-resolution aerosol mass spectrometry. We quantified SOA formation using a tracer ion for low-volatility POA as a reference standard (akin to a naturally occurring internal standard). We report these smoke aging experiments revealed variable organic aerosol (OA) enhancements, even for smoke from similar fuels and aging mechanisms. This variable OA enhancement correlated well with measured differences in the amounts of emitted volatile organic compounds (VOCs) that could subsequently be oxidized to form SOA. For some aging experiments, we were able to predict the SOA production to within a factor of 2 using a fuel-specific VOC emission inventory that was scaled by burn-specific toluene measurements. For fires of coniferous fuels that were dominated by needle burning, volatile biogenic compounds were the dominant precursor class. For wiregrass fires, furans were the dominant SOA precursors. We used a POA tracer ion to calculate the amount of mass lost due to gas-phase oxidation and subsequent volatilization of semivolatile POA. Less than 5% of the POA mass was lost via multiphase oxidation-driven evaporation during up to 2 hr of equivalent atmospheric oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

New Particle Formation Events Over the Southeast Atlantic Coincide With the African Biomass Burning Season

Abstract We investigated the occurrence and evolution of new particle formation (NPF) events over the southeast Atlantic. The studied region is under the influence of the long‐range transport of aerosols and gases during the southern African biomass burning season, from June to October every year. Interestingly, NPF was observed to coincide with the African biomass burning season, although wet removal of pre‐existing aerosols is needed during these NPF events. Surface and airborne measurements show that these NPF events likely occurred in the upper region of the marine boundary layer, and the newly formed aerosols were further transported to the surface via vertical air motions. Using a box model, we predicted that a large fraction of these particles could grow to sizes related to cloud condensation nuclei. Our study shows that NPF can occur over the southeast Atlantic, and the African biomass‐burning plume likely contributed to the NPF occurrence.

54 ENVIRONMENTAL SCIENCES↗

Sensitivity of Regional WRF‐Chem Air Quality and Weather Simulations to Biomass‐Burning Emission Data Sets: A Case Study of the Impact of Canadian Wildfire on the US°

This study focuses on the period from June 26 to 29, 2023, when record‐breaking Canadian wildfires severely impacted air quality in the Midwest United States. Using the Weather Research and Forecasting Model with Chemistry (WRF‐Chem) and four biomass‐burning data sets (Fire Inventory from NCAR version 1, Fire Inventory from NCAR version 2.5, Quick Fire Emissions Data set [QFED], and Regional ABI‐VIIRS Emission), we analyzed aerosol transport from Canada to the US and assessed the model's accuracy in predicting PM 2.5 , O 3 , CO and aerosol weather feedback. Model simulations were compared with ground‐based and remote sensing observations as well as field measurements from the Community Research on Climate and Urban Science (CROCUS) project. Our findings show that the movement of a low‐pressure system from the Great Lakes to the Atlantic, combined with the high‐pressure system over the Atlantic, caused the transport of aerosols from Canadian wildfires to the US. Results show WRF‐Chem significantly underestimated key atmospheric components: aerosol optical depth (AOD) by over 50%, PM 2.5 by 65%–90% and peak O 3 concentrations by 50%–55% across four biomass burning data sets. Additionally, CO and NO 2 concentrations were underpredicted. The substantial underestimation of PM 2.5 led to an overestimation of temperature by up to 3.6 °C primarily due to excessive downward shortwave radiation, which resulted from the underestimation of direct aerosol effects and an increase in sensible heat flux. Among the biomass‐burning data sets, QFED produced the most accurate AOD and PM 2.5 predictions due to improved wildfire emission estimates, leading to a 1.0 to 1.5 °C reduction in temperature overestimation during the daytime. These findings underscore the need for improving wildfire emission estimates for trace gases and aerosols to enhance air quality and weather feedback predictions.

WRF-chem model↗

Cloud processing and weeklong ageing affect biomass burning aerosol properties over the south-eastern Atlantic

Abstract Southern Africa produces a third of global biomass burning emissions, which have a long atmospheric lifetime and influence regional radiation balance and climate. Here, we use airmass trajectories to link different aircraft observations to investigate the evolution of biomass-burning aerosols during their westward transport from Southern Africa over the south-eastern Atlantic, where a semi-permanent stratocumulus cloud deck is located. Our results show secondary organic aerosol formation during the initial 3 days of transport, followed by decreases in organic aerosol via photolysis before reaching equilibrium. Aerosol absorption wavelength dependency decreases with ageing, due to an increase in particle size and photochemical bleaching of brown carbon. Cloud processing, including aqueous-phase reaction and scavenging, contributes to the oxidation of organic aerosols, while it strongly reduces large diameter particles and single-scattering albedo of biomass burning aerosols. Together, these processes resulted in a marine boundary layer with fewer yet more oxidized and absorbing aerosols.

54 ENVIRONMENTAL SCIENCES↗

A study of shock initiation experiments for the explosive PBX 9502 using three reactive burn models

Shock to detonation transition (SDT) experiments are essential in calibrating and validating reactive burn models for explosives. This work investigates the large collection of SDT test data for the explosive PBX 9502 at ambient temperature that was presented by Gustavsen, Sheffield, and Alcon [Journal of Applied Physics, 99, 114907 (2006)]. We first analyze the experimental data and compare two different methods of determining the shock transition time/distance (namely, the bilinear method and the single-curve method). This reveals some of the uncertainty in estimating shock transition points, which contributes to scatter in Pop-plot data. Next, we compare the WSD, AWSD, and SURFplus reactive burn models for a collection of approximately 20 experimental shots using the FLAG hydrocode. Error estimates are used to quantify how well each reactive burn model (and their respective parameter calibrations) performs at predicting the SDT process for a range of loading conditions. Additionally, the importance of mesh resolution and numerical dissipation in SDT simulations will be assessed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Integrated operation scenarios: Chapter 6 of the special issue: on the path to tokamak burning plasma operation

Here we report the progress of the development and optimization of operational scenarios for ITER and beyond, focusing upon baseline, hybrid, and steady-state scenarios since 2007. This includes advancements made by the integrated operation scenarios (IOS) topical group of the international tokamak physical activity as well as contributions from the broader tokamak community. The key area of research involves developing IOSs that encompass tokamak physics, operation, and technology by utilizing integrated modeling and control strategies. This requires leveraging available actuators to simultaneously control plasma position and shape, MHD activities that could lead to disruptions, transport, plasma-wall interaction and power exhaust, fuel cycle, fusion burn, and tritium breeding. The control extends from the plasma initiation phase, through the current ramp-up, flattop, start and end of the fusion burn, and current ramp-down, to the plasma termination phase. A review of the currently developed scenarios and modeling is provided in terms of (i) optimizing plasma initiation in ITER, (ii) preparing for the low activation phase to fully commission all tokamak systems and establish and validate physics and scenario conditions in preparation for deuterim-tritium (DT) operation, (iii) developing and preparing baseline and hybrid scenarios to demonstrate the feasibility of achieving these regimes within device constraints, (iv) exploring steady-state scenarios to meet ITER’s steady-state goals, (v) evaluating and preparing actuators for ITER, (vi) developing integrated control solutions using shared actuators. The most notable achievements include; (i) the development of ITER demonstration discharges by matching various dimensionless parameters, (ii) the development of scenarios in an ITER-like tungsten environment and DT operation, and (iii) the development of scenarios in superconducting tokamaks, enabling long-pulse operations with similar coil constraints to ITER. Along with these significant achievements, outstanding issues and recommendations for further research and development are provided. Importantly, this study goes beyond simply updating the ITER Physics Basis; it carries profound implications for the broader field of burning plasma research, offering valuable insights and guidance for the next generation of fusion experiments and devices.

ITER↗