SEARCH · Engineering Papers

Results for “Atomic techniques”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

All sources NASA NTRS DOE OSTI

NASA NTRS1972

Molecular beam simulation of planetary atmospheric entry - Some recent results.

Progress is reported in the development of molecular beam techniques to simulate entry into planetary atmospheres. Molecular beam sources for producing fast beams containing CO2 and atomic oxygen are discussed. Results pertinent to the design and calibration of a mass spectrometer ion source for measurement of the Martian atmosphere during the free molecule portion of the entry trajectory are also presented. The shortcomings and advantages of this simulation technique are discussed, and it is demonstrated that even with certain inadequacies much information useful to the ion source design was obtained. Particularly, it is shown that an open-cavity configuration retains sensitivity to atomic oxygen, provides reasonable signal enhancement from the stagnation effect, is not highly sensitive to pitch and yaw effects, and presents no unforeseen problems in measuring CO2 or atomic oxygen.

French, J. B.↗

NASA NTRS1983

Computed tomographic analysis of meteorite inclusions

The feasibility of obtaining nondestructively a cross-sectional display of very dense heterogeneous rocky specimens, whether lunar, terrestrial or meteoritic, by using a fourth generation computed tomographic (CT) scanner, with modifications to the software only, is discussed. A description of the scanner, and of the experimental and analytical procedures is given. Using this technique, the interior of heterogeneous materials such as Allende can be probed nondestructively. The regions of material with high and low atomic numbers are displayed quickly; the object can then be cut to obtain for analysis just the areas of interest. A comparison of this technique with conventional industrial and medical techniques is made in terms of image resolution and density distribution display precision.

Arnold, J. R.↗

NASA NTRS1988

Surface compositional and structural aspects of Martian samples

There are many excellent reasons to examine the surface composition of a wide range of Martian samples. The existing spectral data indicate that many dust and soil particles have a thin Fe(+3) layer with a typical particle size in the 10 micrometer to 400 micrometer range. In view of the high CO2 content of the atmosphere, one might expect that surface carbonates should be present. In addition to chemisorbed material there will probably exist physisorbed atmospheric components of the atmosphere including oxygen, nitrogen and water vapor. The latter could possibly give rise to some hydrated minerals. Using ultra-high-vacuum/mass spectrographic techniques it should be possible to detect physisorbed and moderately strong chemisorbed species on the particle surfaces with a temperature programmed degassing procedure. In some instances such an approach is capable of helping distinguish between volcanic and impact generated materials by detecting the presence of fumerolic gases. Such gases typically condense on the exterior of the ejected particles. Additionally surface atomic and chemical compositions should be examined by a combination of modern surface analytical techniques. The combination we currently have in Buffalo at SUNY would appear to be one of the best available including ESCA (150 micrometer spot capability) Auger (SAM) with 300 A focussing for surface compositional surveys, SIMS for high sensitivity trace element detection and ISS for immediate surface layer analysis.

Cadenhead, D. A.↗

NASA NTRS1980

Accuracy of trace element determinations in alternate fuels

A review of the techniques used at Lewis Research Center (LeRC) in trace metals analysis is presented, including the results of Atomic Absorption Spectrometry and DC Arc Emission Spectrometry of blank levels and recovery experiments for several metals. The design of an Interlaboratory Study conducted by LeRC is presented. Several factors were investigated, including: laboratory, analytical technique, fuel type, concentration, and ashing additive. Conclusions drawn from the statistical analysis will help direct research efforts toward those areas most responsible for the poor interlaboratory analytical results.

Greenbauer-Seng, L. A.↗

NASA NTRS1992

X-Ray Microanalysis and Electron Energy Loss Spectrometry in the Analytical Electron Microscope: Review and Future Directions

This paper reviews and discusses future directions in analytical electron microscopy for microchemical analysis using X-ray and Electron Energy Loss Spectroscopy (EELS). The technique of X-ray microanalysis, using the ratio method and k(sub AB) factors, is outlined. The X-ray absorption correction is the major barrier to the objective of obtaining I% accuracy and precision in analysis. Spatial resolution and Minimum Detectability Limits (MDL) are considered with present limitations of spatial resolution in the 2 to 3 microns range and of MDL in the 0.1 to 0.2 wt. % range when a Field Emission Gun (FEG) system is used. Future directions of X-ray analysis include improvement in X-ray spatial resolution to the I to 2 microns range and MDL as low as 0.01 wt. %. With these improvements the detection of single atoms in the analysis volume will be possible. Other future improvements include the use of clean room techniques for thin specimen preparation, quantification available at the I% accuracy and precision level with light element analysis quantification available at better than the 10% accuracy and precision level, the incorporation of a compact wavelength dispersive spectrometer to improve X-ray spectral resolution, light element analysis and MDL, and instrument improvements including source stability, on-line probe current measurements, stage stability, and computerized stage control. The paper reviews the EELS technique, recognizing that it has been slow to develop and still remains firmly in research laboratories rather than in applications laboratories. Consideration of microanalysis with core-loss edges is given along with a discussion of the limitations such as specimen thickness. Spatial resolution and MDL are considered, recognizing that single atom detection is already possible. Plasmon loss analysis is discussed as well as fine structure analysis. New techniques for energy-loss imaging are also summarized. Future directions in the EELS technique will be the development of new spectrometers and improvements in thin specimen preparation. The microanalysis technique needs to be simplified and software developed so that the EELS technique approaches the relative simplicity of the X-ray technique. Finally, one can expect major improvements in EELS imaging as data storage and processing improvements occur.

Goldstein, J. I.↗

NASA NTRS1971

ESRO study program for a space experiment on gravitation theories

ESRO is considering a space experiment which is the definition phase. A more complete utilization of space techniques, leading to highly accurate acceleration measurements in a heliocentric spacecraft, together with an improved laser signal propagation method (using a space-borne atomic clock), could substantially increase the validity of the gravitational time delay test during solar conjunction. Preliminary investigations of the primary required techniques were carried out. These studies included an orbit analysis, investigation of drag-free techniques, and studies of the time measuring instrument. These studies were used to define the framework of a space experiment on gravitation theories. A preliminary feasibility study of the mission is being undertaken.

Israel, G. M.↗

NASA NTRS2013

Review of Fluorescence-Based Velocimetry Techniques to Study High-Speed Compressible Flows

This paper reviews five laser-induced fluorescence-based velocimetry techniques that have been used to study high-speed compressible flows at NASA Langley Research Center. The techniques discussed in this paper include nitric oxide (NO) molecular tagging velocimetry (MTV), nitrogen dioxide photodissociation (NO2-to-NO) MTV, and NO and atomic oxygen (O-atom) Doppler-shift-based velocimetry. Measurements of both single-component and two-component velocity have been performed using these techniques. This paper details the specific application and experiment for which each technique has been used, the facility in which the experiment was performed, the experimental setup, sample results, and a discussion of the lessons learned from each experiment.

Bathel, Brett F.↗

NASA NTRS1980

Collisional redistribution of radiation. I - The density matrix

As a first step in deriving accurate, calculable expressions for collisional redistribution of radiation, valid outside the impact regime a method for calculating an accurate binary-collision density operator for an atom in the presence of a driving field and perturbers is presented. Projection-operator techniques to establish first the precise validity of the Markoff approximation for radiative relaxation are used. Using the same techniques, it is shown how the collisional-relaxation problem may be analyzed in a practical manner outside the Markoff approximation. The effect of correlations between radiative and collisional events is included in a consistent way and the physical implications of these correlation effects are demonstrated for a simple example, the two-level atom with nondegenerate levels.

Burnett, K.↗

NASA NTRS1979

Absolute rate constants for the reaction of atomic hydrogen with ketene from 298 to 500 K

Rate constants for the reaction of atomic hydrogen with ketene have been measured at room temperature by two techniques, flash photolysis-resonance fluorescence and discharge flow-resonance fluorescence. The measured values are (6.19 + or - 1.68) x 10 to the -14th and (7.3 + or - 1.3) x 10 to the -14th cu cm/molecule/s, respectively. In addition, rate constants as a function of temperature have been measured over the range 298-500 K using the FP-RF technique. The results are best represented by the Arrhenius expression k = (1.88 + or - 1.12) x 10 to the -11th exp(-1725 + or - 190/T) cu cm/molecule/s, where the indicated errors are at the two standard deviation level.

Michael, J. V.↗

NASA NTRS1979

High temperature UF6 and plasma research

Research currently under way on technology for uranium plasma core reactors is reviewed. A feeder system to provide a controlled and steady flow of UF6 at rates up to 5 g/sec and temperatures up to 500 K into rf plasma test chambers operating at pressures of up to 20 atm has been developed. Plasma emission and dye laser absorption measurements have been used to estimate the radial distribution of uranium atom number density within the plasma. X-ray absorption equipment and techniques have also been employed to measure the amount of uranium in the plasma, and dc plasma torch experiments have shown variations in plasma VUV emission with temperature. Analysis of residues deposited on various test-chamber components after plasma tests reveals traces of several uranium oxides, including UO2F2, and various exhaust duct configurations with flow augmentation are under investigation as means of preventing uranium deposition. Other areas of research include off- and on-line exhaust gas diagnostics, and a UF6/Ar injection, separation and recirculation system.

Roman, W. C.↗

NASA NTRS1982

Nitridation of Si(111) by nitrogen atoms. II

The reaction between Si(111) and nitrogen atoms has been investigated by LEED, Auger, and electron energy loss (ELS) techniques. The early stage of the reaction at 850-1050 C involves the formation of a chemically reacted monolayer which grows in islands. The sticking coefficient for the submonolayer is estimated to be of the order of unity. Two electronically different surface structures can be formed during these stages, yielding the '8 x 8' and the quadruplet LEED patterns; the quadruplet unit cell is the one with the highest nitrogen density. A pure quadruplet structure is obtained from samples with a carbon contamination of the Si monolayer of about 5 pct. During the multilayer stages, the influence of the substrate is not as important, and the reactions at 850 C and above produce quadruplet-like local structures.

Schrott, A. G.↗

NASA NTRS1985

Ion beam sputter-deposited thin film coatings for protection of spacecraft polymers in low Earth orbit

Ion beam sputter-deposited thin films of Al2O3, SiO2, and a codeposited mixture of predominantly SiO2 with small amounts of a fluoropolymer were evaluated both in laboratory plasma ashing tests and in space on board shuttle flight STS-8 for effectiveness in preventing oxidation of polyimide Kapton. Measurements of mass loss and optical performance of coated and uncoated polyimide samples exposed to the low Earth orbital environment are presented. Optical techniques were used to measure loss rates of protective films exposed to atomic oxygen. Results of the analysis of the space flight exposed samples indicate that thin film metal oxide coatings are very effective in protecting the polyimide. Metal oxide coatings with a small amount of fluoropolymer codeposited have the additional benefit of great flexibility.

Banks, B. A.↗

NASA NTRS1984

Core saturation in a moving medium

A numerical technique for solving the line transfer equation of a two-level atom in static equilibrium is presented. Complete redistribution of emitted photons is assumed, as is saturation at the line core. Emission intensity is calculated either by a generalized Eddington-Barber relation, a first-order differential equation for the specific intensity, or by a formal transfer integral. Sample calculations are performed of the line transfer equation in a semi-infinite atmosphere with a constant Planck function of the collision parameter and for the Mg II resonance line in a model solar atmosphere experiencing shocks. Attention is focused on the line wings in the latter problem. The first order differential equation approach yields the best intensity values and temperature structure.

Kalkofen, W.↗

NASA NTRS1985

Digital Image Processing application to spray and flammability studies

Digital Image Processing has been integrated into a new technique for measurements of fuel spray characteristics. The advantages of this technique are: a wide dynamic range of droplet sizes, accounting for nonspherical droplet shapes not possible with other spray assessment techniques. Finally, the technique has been applied to the study of turbojet engine fuel nozzle atomization performance with Jet A and antimisting fuel.

Hernan, M. A.↗

NASA NTRS1985

Ion beam sputter-deposited thin film coatings for protection of spacecraft polymers in low earth orbit

Ion beam sputter-deposited thin films at Al2O3, SiO2, and a codeposited mixture of predominantly SiO2 with small amounts of fluoropolymer were evaluated both in laboratory plasma ashing tests and in space on board Shuttle flight STS-8 for effectiveness in preventing oxidation of polyimide Kapton. Measurements of mass loss and optical performance of coated and uncoated polyimide samples exposed to the low earth orbital environment are presented. Optical techniques were used to measure loss rates of protective films exposed to atomic oxygen. Results of the analysis of the space flight exposed samples indicate that thin film metal oxide coatings are very effective in protecting the polyimide. Metal oxide coatings with a small amount of fluoropolymer codeposited have the additional benefit of great flexibility.

Banks, B. A.↗

NASA NTRS1986

Lunar sample analysis

A wide variety of lunar sample and meteorite studies were performed. Abstracts of the most recent reports are also attached. Experimental techniques employed have included scanning electron microscopy, transmission electron microscopy, Mossbauer spectroscopy, atomic absorption analysis and a variety of simulation studies.

Housley, R. M.↗

NASA NTRS1986

Transient gain-versus-absorption laser probing of spin-orbit states, kinetics and dynamics

The spin-orbit populations of excited (2P1/2) and ground (2P3/2) state Br atoms at 2714 nm and I atoms at 1315 nm are examined using a tunable F-center laser and a diode laser. The transient laser gain-versus-absorption measurements are utilized to estimate quantum yields of the spin-orbit states in the photodissociation of Br- and I-containing compounds; the continuum yields for Br2 are investigated in terms of temperature. The collisional release, Doppler velocity effects, and differing reactivity of the spin-orbit excited and ground state atoms are studied. It is noted that the transient gain versus absorption technique is applicable to the analysis of kinetic phenomena due to its high sensitivity and excellent time resolution.

Smedley, John E.↗

NASA NTRS1989

Statistical Analysis For Nucleus/Nucleus Collisions

Report describes use of several statistical techniques to charactertize angular distributions of secondary particles emitted in collisions of atomic nuclei in energy range of 24 to 61 GeV per nucleon. Purpose of statistical analysis to determine correlations between intensities of emitted particles and angles comfirming existence of quark/gluon plasma.

Mcguire, Stephen C.↗