Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ascent”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

ERBS orbit ascent utilizing continuous low thrust maneuvers

The Earth Radiation Budget Satellite (ERBS) is a National Aeronautics and Space Administration (NASA) spacecraft whose purpose is to investigate the components of the earth's radiation budget. The ERBS was deployed in a 57 degree inclined, 352.2 kilometer altitude circular orbit by the NASA Space Transportation System (STS) on October 5, 1984. The spacecraft then ascended to its 603 kilometer, near-circular mission orbit by a series of continuous low-thrust maneuvers. The ERBS was the first free-flyer mission to rely on continuous low thrust to spiral from one circular orbit to another. Careful planning and monitoring of these maneuvers were essential to their successful execution. Errors in the prediction of the propulsion system performance or in burn duration would result in loss of contact with the spacecraft during a maneuver and could result in a premature end to the maneuver and difficulty in computing a definitive orbit.

Hoge, S. L.↗

Magma ascent by porous flow

Using a generalized form of Darcy's law that includes matrix deformation, solitary wave solutions called magmons, consisting of localized regions of high porosity that ascend through the porous matrix, are extended to two spatial dimensions, and their impact on igneous processes is discussed. It is suggested that magmons are unlikely to be important in regions of broad upswelling where compaction processes are unimportant. Liquid supplied from below to a stable partially molten region of the athenosphere, as occurs beneath ocean volcanic centers or in subcontinental mantle, is expected to ascend in magmons. The waveform of a magmon ascends faster than the liquid within the magmon, taking in new liquid from above as old liquid is lost from below, and it is suggested that magmons can mobilize small degrees of partial melt and deliver it to the surface.

Scott, David R.↗

Comparative flight strategies for ascent from Martian surface to orbiter rendezvous

Flight maneuvers and strategies to transport a vehicle from the Martian surface to orbiter rendezvous are analyzed to determine the most fuel-efficient method. Both endo- and exo-atmospheric flight strategies are considered for orbiter rendezvous into parking orbits of arbitrary inclination. It is found that optimal mass efficiency is achieved where the orbiter inclination is equal to or exceeds the latitude of the launch site. It is shown that high aerodynamic lifting capability improves performance for low circular orbit (LCO) rendezvous. It is suggested that the synergetic ballistic-projecting technique is best for optimal LCO rendezvous and that the all-thrust technique with plane change at apoapsis is best for optimal high elliptical orbit rendezvous.

Menees, Gene P.↗

Minimum-fuel ascent to orbit using air-breathing propulsion

Single-stage vehicles using air-breathing propulsion hold promise for more economical delivery of payloads to orbit. The characterization of minimum-fuel trajectories over the range of possible engine and aerodynamic performance of such vehicles provides useful feedback to engine and vehicle designers and paves the way for the development of guidance logic. The minimum-fuel trajectory problem is formulated, propulsion system and aerodynamic models are presented, a numerical solution approach is described, and some preliminary results are discussed.

Van Buren, Mark A.↗

GOES-I/M ascent maneuvers from transfer orbit to station

The Geostationary Operational Environmental Satellite (GOES)-I/M station acquisition sequence consists nominally of three in-plane/out-of-plane maneuvers at apogee on the line of relative nodes and a small in-plane maneuver at perigee. Existing software to determine maneuver attitude, ignition time, and burn duration required modification to optimize the out-of-plane parts and admit the noninertial, three-axis stabilized attitude. The Modified Multiple Impulse Station Acquisition Maneuver Planning Program (SENARIO2) was developed from its predecessor, SCENARIO, to optimize the out-of-plane components of the impulsive delta-V vectors. Additional new features include commputation of short term J sub 2 perturbations and output of all premaneuver and postmaneuver orbit elements, coarse maneuver attitudes, propellant usage, spacecraft antenna aspect angles, and ground station coverage. The output data are intended to be used in the launch window computation and by the maneuver targeting computation (General Maneuver (GMAN) Program) software. The maneuver targeting computation in GMAN was modified to admit the GOES-I/M maneuver attitude. Appropriate combinations of ignition time, burn duration, and attitude enable any reasonable target orbit to be achieved.

Abeyagunawardene, S.↗

Optimizing Space Shuttle ascent trajectories within environmental constraints

A method is presented for relating the structural margin requirements for the Space Shuttle Vehicle to flight design criteria. Using this approach, it is possible to develop flight designs that optimize structural margins and payload. It is also shown how wind and environmental data bases are incorporated into the Space Shuttle mission flight design activities.

Whitehead, Douglas S.↗

Redistribution of particulates on a payload during flight ascent

The dislodgement, venting, and redeposition of particles on a surface caused by the vibroacoustic, gravitational, and aerodynamic forces are estimated and the resulting areal obscurations of the surface are calculated. The data on particle redistribution estimated to occur during a Shuttle launch are employed to estimate the obscuration of a spacecraft's star tracker, as it is carried into orbit by the Shuttle. The approach used for that calculation is generalized so that it can be employed for other applications where either the Shuttle or an Expendable Launch Vehicle (ELV) is employed for launch. Approaches for evaluating particle redistribution for other applications and for general use are indicated.

Scialdone, John J.↗

In-situ propellant rocket engines for Mars mission ascent vehicle

When comtemplating the human exploration of Mars, many scenarios using various propulsion systems have been considered. One propulsion option among them is a vehicle stage with multiple, pump fed rocket engines capable of operating on propellants available on Mars. This reduces the Earth launch mass requirements, resulting in economic and payload benefits. No plentiful sources of hydrogen on Mars have been identified on the surface of Mars, so most commonly used high performance liquid fuels, such as hydrogen and hydrocarbons, can be eliminated as possible in-situ propellants. But 95 pct. of the Martian atmosphere consists of carbon dioxide, which can be converted into carbon monoxide and oxygen. The carbon monoxide oxygen propellant conbination is a candidate for a Martian in-situ propellant rocket engine. The feasibility is analyzed of a pump fed engine cycle using the propellant combination of carbon monoxide and oxygen.

Roncace, Elizabeth A.↗

Numerical simulation of Shuttle ascent transonic flow using an unstructured-grid approach

An unstructured-grid, finite-volume method has been developed for simulating the inviscid flow over spacecrafts of realistic configuration. The grid generation is accomplished by a new technique on the basis of the advancing-front concept. This simple technique is shown to be equally as powerful for a complex multibody as for a single vehicle. Second- or third-order accuracy is obtained via an innovative interpolation procedure similar to the conventional MUSCL approach. This method has been applied to the Shuttle orbiter and a representative Shuttle launch vehicle consisting of the orbiter, the external tank, and the solid rocket boosters. A comparison is discussed between the present results and other results obtained from structured- and unstructured-grid methods.

Wey, T. C.↗

In-situ propellant rocket engines for Mars missions ascent vehicle

When contemplating the human exploration of Mars, many scenarios using various propulsion systems have been considered. One propulsion option among them is a vehicle stage with multiple, pump fed rocket engines capable of operating on propellants available on Mars. This reduces the earth launch mass requirements, resulting in economic and payload benefits. No plentiful sources of hydrogen on Mars have been identified on the surface of Mars, so most commonly used high performance liquid fuels, such as hydrogen and hydrocarbons, can be eliminated as possible in situ propellants. But 95 pct of the Martian atmosphere consists of carbon dioxide, which can be converted into carbon monoxide and oxygen. The carbon monoxide oxygen propellant combination is a candidate for a Martian in situ propellant rocket engine. The feasibility is analyzed of a pump fed engine cycle using the propellant combination of carbon monoxide and oxygen.

Roncace, Elizabeth A.↗

Use of Taguchi Design of Experiments to Determine ALPLS Ascent Delta-5 Sensitivities and Total Mass Sensitivities to Release Conditions and Vehicle Parameters

The objective of this study is to evaluate the use of Taguchi's Design of Experiment Methods to improve the effectiveness of this and future parametric studies. Taguchi Methods will be applied in addition to the typical approach to provide a mechanism for comparing the results and the cost or effort necessary to complete the studies. It is anticipated that results of this study should include an improved systematic analysis process, an increase in information obtained at a lower cost, and a more robust, cost effective vehicle design.

Carrasco, Hector Ramon↗

Application of the Chimera overlapped grid scheme to simulation of Space Shuttle ascent flows

Several issues relating to the application of Chimera overlapped grids to complex geometries and flowfields are discussed. These include the addition of geometric components with different grid topologies, gridding for intersecting pieces of geometry, and turbulence modeling in grid overlap regions. Sample results are presented for transonic flow about the Space Shuttle launch vehicle. Comparisons with wind tunnel and flight measured pressures are shown.

Buning, Pieter G.↗