Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Agreements”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Comparison of ozone determinations by ultraviolet photometry and gas-phase titration

A comparison of ozone determinations based on ultraviolet absorption photometry and gas-phase titration (GPT) shows good agreement between the two methods. Together with other results, these findings indicate that three candidate reference methods for ozone, UV photometry, IR photometry, and GPT are in substantial agreement. However, the GPT method is not recommended for routine use by air pollution agencies for calibration of ozone monitors because of susceptibility to experimental error.

Demore, W. B.↗

Atmospheric neutrons

Additional calibrations of the University of California double-scatter neutron detector and additional analysis corrections lead to slightly changed neutron fluxes. The theoretical angular distributions of Merker (1975) are in general agreement with the reported experimental fluxes but do not give the peaks for vertical upward and downward moving neutrons. The theoretical neutron escape current is in agreement with the experimental values from 10 to 100 MeV. The experimental fluxes obtained agree with those of Kanbach et al. (1974) in the overlap region from 70 to 100 MeV.

Preszler, A. M.↗

Detailed gravimetric geoid computations in North America

A detailed gravimetric geoid has been computed for the Eastern United States and the Northwestern Atlantic Ocean by combining the Goddard Space Flight Center GEM-8 earth gravity model with the available 15 x 15 arcmin and 1 x 1 deg mean free air surface gravity observations. The short wavelength undulations were computed by applying Stokes' formula to the 15 x 15 arcmin and 1 x 1 deg surface data. The long wavelength undulations were provided by the GEM-8 model. The gravimetric geoid has been compared with Geoceiver derived and astrogeodetically determined geoid heights in the United States and the rms agreement is on the order of 1.5 meters. Excellent agreement in shape has been found between the detailed geoid and geoidal profiles derived from GEOS-III altimeter data in the Northwest Atlantic Ocean.

Marsh, J. G.↗

Hydrogen transport in iron and steel

The permeabilities of protium, deuterium, and tritium in foil specimens of Marz grade iron, 4130 steel, Armco iron, HP-9-4-20, and T-1 steels were studied at hydrogen pressures between 0.02 and 0.5 MPa over the temperature range 260-700 K. The permeability was measured by a pressure-rise method, deuterium counting with a detector, and radioactivity counting. Good agreement is found between the measurement techniques used. It is shown that the permeabilities of protium, deuterium, and tritium in iron and T-1 steel at temperatures as low as 260 K are in good agreement with the equation proposed by Gonzalez (1967). However, the permeabilities of HP-9-4-20 and 4130 steel to hydrogen are typically lower than predicted. The isotope effect on hydrogen permeability of HP-9-4-20, 4130 and T-1 steels, and high-purity iron can be estimated by an inverse square root of mass correction.

Louthan, M. R., Jr.↗

Laser velocimetry applied to transonic and supersonic aerodynamics

As a further demonstration of the capabilities of laser velocity in compressible aerodynamics, measurements obtained in a Mach 2.9 separated turbulent boundary layer and in the transonic flow past a two-dimensional airfoil section are presented and compared to data realized by conventional techniques. In the separated-flow study, the comparisons were made against pitot-static pressure data. Agreement in mean velocities was realized where the pressure measurements could be considered reliable; however, in regions of instantaneous reverse velocities, the laser results were found to be consistent with the physics of the flow whereas the pressure data were not. The laser data obtained in regions of extremely high turbulence suggest that velocity biasing does not occur if the particle occurrence rate is low relative to the turbulent fluctuation rate. Streamwise turbulence intensities are also presented. In the transonic airfoil study, velocity measurements obtained immediately outside the upper surface boundary layer of a 6-inch chord MACA 64A010 airfoil are compared to edge velocities inferred from surface pressure measurements. For free-stream Mach numbers of 0.6 and 0.8, the agreement in results was very good. Dual scatter optical arrangements in conjunction with a single particle, counter-type signal processor were employed in these investigations. Half-micron-diameter polystyrene spheres and naturally occurring condensed oil vapor acted as light scatterers in the two respective flows. Bragg-cell frequency shifting was utilized in the separated flow study.

Johnson, D. A.↗

Circumferential distortion modeling of the TF30-P-3 compression system

Circumferential inlet pressure and temperature distortion testing of the TF30 P-3 turbofan engine was conducted. The compressor system at the test conditions run was modelled according to a multiple segment parallel compressor model. Aspects of engine operation and distortion configuration modelled include the effects of compressor bleeds, relative pressure-temperature distortion alignment and circumferential distortion extent. Model predictions for limiting distortion amplitudes and flow distributions within the compression system were compared with test results in order to evaluate predicted trends. Relatively good agreement was obtained. The model also identified the low pressure compressor as the stall-initiating component, which was in agreement with the data.

Mazzawy, R. S.↗

Vorticity interaction effects on blunt bodies

Numerical solutions of the viscous shock layer equations governing laminar and turbulent flows of a perfect gas and radiating and nonradiating mixtures of perfect gases in chemical equilibrium are presented for hypersonic flow over spherically blunted cones and hyperboloids. Turbulent properties are described in terms of the classical mixing length. Results are compared with boundary layer and inviscid flowfield solutions; agreement with inviscid flowfield data is satisfactory. Agreement with boundary layer solutions is good except in regions of strong vorticity interaction; in these flow regions, the viscous shock layer solutions appear to be more satisfactory than the boundary layer solutions. Boundary conditions suitable for hypersonic viscous shock layers are devised for an advanced turbulence theory.

Anderson, E. C.↗

Skylab S-193 radar altimeter experiment analyses and results

The design of optimum filtering procedures for geoid recovery is discussed. Statistical error bounds are obtained for pointing angle estimates using average waveform data. A correlation of tracking loop bandwidth with magnitude of pointing error is established. The impact of ocean currents and precipitation on the received power are shown to be measurable effects. For large sea state conditions, measurements of sigma 0 deg indicate a distinct saturation level of about 8 dB. Near-nadir less than 15 deg values of sigma 0 deg are also presented and compared with theoretical models. Examination of Great Salt Lake Desert scattering data leads to rejection of a previously hypothesized specularly reflecting surface. Pulse-to-pulse correlation results are in agreement with quasi-monochromatic optics theoretical predictions and indicate a means for estimating direction of pointing error. Pulse compression techniques for and results of estimating significant waveheight from waveform data are presented and are also shown to be in good agreement with surface truth data. A number of results pertaining to system performance are presented.

Brown, G. S.↗

Investigation of supersonic turbulent boundary-layer separation on a compression ramp by an integral method

An investigation was made to determine the feasibility of using a boundary layer integral method to study the separation of a turbulent boundary layer on a two dimensional ramp at supersonic speeds. The numerical calculations were made for a free stream Mach number of 3, a Reynolds number of 10 million, and over a ramp angle range from 0 deg to 30 deg. For ramp angles where no flow separation was indicated, theoretical calculations were in reasonable agreement with experimental data except for a somewhat belated rise in pressure. For larger ramp angles, where separation was present, the investigation produced results that were not in agreement with experiment or with results calculated by time dependent Navier-Stokes methods. This apparently was true because no provision had been made for a proper shock boundary layer interaction where strong normal pressure gradients are induced within the boundary layer under the shock independent of surface curvature effects.

Patel, D. K.↗

Discrepancy between electron heating and cooling rates derived from Atmosphere Explorer-C measurements

The present theory of electron temperature in the daytime mid-latitude ionosphere is tested by using Atmosphere Explorer-C measurements. In the region below 300 km, where a balance is expected between electron heating by photoelectron impact and electron cooling to ions and neutrals, we find an imbalance in which the cooling rate is consistently higher than the heating rate. The shapes of the altitude profiles also differ substantially. The cooling rate has a sharp peak at about 220 km, while the heating rate exhibits a broad peak about 30 km lower. Improved agreement is achieved at higher altitudes by using an oxygen fine structure loss rate smaller by a factor of 2, based on more recent collision strength calculations. Although this improves the overall agreement of the heating and cooling rates, the shape discrepancy remains, and the new cooling rate falls consistently below the heating rate below 200 km.

Brace, L. H.↗

Absolute intensity measurement of the 4-0 vibration-rotation band of carbon monoxide

The absolute intensity of the 4-0 vibration band of CO is measured in spectra obtained using a 25-m base-path multiple-traversal absorption cell and a 5-m scanning spectrometer. The intensities of individual vibration-rotation lines in this band are determined from measurements of their equivalent widths, and absolute values for the rotationless transition moment and the vibration-rotation interaction factor are derived from the measured line strengths. The experimentally obtained vibration-rotation function is compared with a theoretical curve; agreement between theory and experiment is found to be good for the P-branch but poor for the R-branch. It is noted that numerical solutions to the radial Schroedinger equation lead to vibration-rotation function values that are in good agreement with the experiment.

Chackerian, C., Jr.↗

An approximate calculation of the strong interaction on a transonic airfoil

This paper describes an interactive computational scheme that calculates the transonic flow field over an airfoil. The inviscid flow, the turbulent boundary layer in the weak interaction region, and the elliptic flow in the strong interaction region are computed separately, and the solutions are matched iteratively in a direct, second-order interaction scheme. The pressure distribution, obtained from a transonic, small-perturbation solution, is prescribed on the boundary layer and the Navier-Stokes equations and the ensuing displacement thicknesses are used to modify the inviscid flow. The best overall results are obtained by using a turbulence model that eliminates the eddy viscosity in the strong interaction region. Computed pressure distributions are compared with experimental data and with Navier-Stokes solutions. In weak interactions, the agreement with experimental data is very good, as it is also in strong interactions except for the pressures in the separated-flow region. There the agreement is qualitative only, and the pressure recovery is too high. The results in both cases are superior or equal to those of the Navier-Stokes solutions, and the present method is significantly faster.

Seginer, A.↗

Microwave radiometric determination of wind speed at the surface of the ocean during BESEX

Microwave radiometric measurements were made at wavelengths ranging from 0.8 to 2.8 cm at altitudes from 0.16 to 11 km under well documented meteorological conditions over the Bering Sea. It is shown that determinations of wind speed at the ocean surface and liquid water content of the clouds may be made from such data. Determinations were made from two simultaneous but independent sets of radiometric measurements. The wind speeds and liquid water contents made from these two sets showed remarkable agreement. Independent estimates of these parameters made from in situ measurements showed reasonable agreement as well.

Wilheit, T. T., Jr.↗

Electron-impact excitation of carbon and silicon in the distorted-wave approximation

The 3P to 1D electron-impact excitation cross section within the ground configuration of both neutral carbon and silicon is calculated in the distorted-wave approximation of the two-state Hartree-Fock coupled equations. An essential element of the present treatment is that orthogonality to core orbitals is not assumed in deriving equations for the scattering orbitals. A local adiabatic polarization potential is also added to the distorted-wave equations. Both elements are necessary in getting good agreement with close-coupling results for carbon to low impacting energies. The agreement is sufficiently good that predictions for silicon should be accurate to within a factor of 2.

Pindzola, M. S.↗

Facular line profiles and facular models

Profiles for lines near 5250 A have been calculated from facular models and compared with observed profiles. The observations are from photographic and photoelectric spectra. The atomic parameters are determined by comparison of calculated profiles with those observed for the quiet sun. The effects of finite spatial resolution and a magnetic field are required to obtain agreement with observed facular line profiles. The empirical magnetic field deduced by matching observed and calculated profiles is reasonably consistent with that in the facular models. The main purpose of this paper is to show that by including the effects of scattered photospheric light and a strong magnetic field, reasonable agreement can be achieved between observed and calculated facular line profiles. Results are also presented for the wing of the Ca II K line, showing line profiles and effective filtergram contrasts for several facular models. It is concluded that observations made with weak Fraunhofer lines are not very useful for discrimination among facular models, particularly without simultaneous magnetic-field measurements. The K line may offer a better discriminator. The facular model presently favored has a magnetic field strength of about 1500 gauss at the surface of the photosphere.

Chapman, G. A.↗

Quasi-three-dimensional laminar boundary-layer separations in supersonic flow

A numerical algorithm is presented for solving laminar, steady, supersonic interacting boundary-layer flows for quasi-three-dimensional configurations. The interaction problem is treated as a boundary-value problem and a salient feature of the scheme is the direct implementation of the downstream boundary condition. Solutions are presented for axisymmetric and swept (yawed) compression ramps for both adiabatic and heat transfer conditions over a Mach number range of 2-6. The results are in good agreement with experimental data and existing theories for axisymmetric cases. For the swept (yawed) configurations, lack of experimental data makes a direct comparison impossible, but the present solutions are found to be in qualitative agreement with earlier studies. In addition it is shown that the trends obtained here for the sweep effects are well predicted by a simple extension of the two-dimensional asymptotic theory.

Vatsa, V. N.↗

Cold plasma diagnostics using satellite measurements of VLF signals from ground transmitters

A diagnostic technique to obtain the cold-plasma density profile in the magnetosphere is introduced. This method uses satellite measurements of group delay and pulse duration of VLF signals from ground transmitters in conjunction with a detailed ray-tracing analysis. An iterative method is involved which starts with an approximate density profile, computes the ray paths for that profile, and then compares the properties of the rays that reach the satellite location with the actual satellite measurements. The density profile is then modified to account for any discrepancies between the two results. The same process is repeated with the new profile until one has reasonable agreement between the data and ray-tracing results. This method is applied to the case of an Imp 6 pass, where strong signals from the Siple VLF transmitter were observed for over 25 min. Good agreement is found between the results of the proposed technique and the well-known ground whistler techniques of cold-plasma diagnostics. The results also serve to illustrate the wide diversity of propagation paths from ground transmitters to high-altitude satellites during VLF wave-injection experiments.

Inan, U. S.↗

Significance of large-scale circulation in magnetic storm characteristics with application to AE-C neutral composition data

Theoretical analysis of a magnetic storm in February 1974 leads to the following conclusions: (1) Wind-induced diffusion leads to depletion of O and He and enhancements of Ar at high latitudes. (2) The same process increases O and He and decreases Ar at low latitudes. (3) There is substantial agreement between theory and neutral composition data from the AE-C closed source neutral mass spectrometer; the low-latitude enhancements of O and He, in magnitude comparable to or even larger than those of N2 and Ar, are observed, which is characteristic for the circulation mechanism. (4) To achieve agreement with the composition measurements, a heat input rate of 1.7 ergs/sq cm s is required above 120 km. (5) Changes in the neutral composition associated with the annual variations have significant effects on the magnetic storm dynamics.

Mayr, H. G.↗