Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Aerobraking”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Extraterrestrial resource utilization for economy in space missions

The NASA/University of Arizona Space Engineering Research Center is dedicated to research on the discovery, characterization, mapping, beneficiation, extraction, processing, and fabrication of useful products from extraterrestrial material. Schemes for the automated production of low-technology products that are likely to be desired in large quantities in the early stages of any large-scale space activity are identified and developed. This paper summarizes the research program, concentrating upon the production of (1) propellants, both cryogenic and storable, (2) volatiles such as water, nitrogen, and carbon dioxide for use in life-support systems (3) structural metals, and (4) refractories for use in aerobrakes and furnace linings.

Lewis, J. S.↗
NASA NTRS1991

Chemical-kinetic problems of future NASA missions

Thermochemical nonequilibrium in the shock layer surrounding vehicles entering the atmospheres of earth and Mars at superescape velocities is studied, deriving reaction rate coefficients that reproduce experimental data obtained in shock tubes. Thermodynamic properties and emitted radiation intensities are obtained for shock tube flow and flow in a shock layer over a blunt body. The results indicate that the viscous layer of the ablation product over an ablating heat shield is likely to be in chemical nonequilbrium. For earth entry flight, the thickness of the nonequilbrium region is between and 2 cm at the expected peak radiation point in the aerobraking trajectory, For Martian entry flight it is between 8 and 23 cm. For the earth entry case, nonequilibrium phenomena reduce radiative heating rate, while the opposite occurs for the Martian case. The radiative heat transfer rates are significant for the Mars entry conditions at entry velocities equal to or greater than 7 km/s.

Park, Chul↗
NASA NTRS1990

Human exploration - Moon/Mars mission

The Space Eploration Initiative launched by the Bush Administration in May, 1990, will intensively explore alternative mission architectures involving the use of the moon as a staging post for manned exploration of Mars. The advanced technologies to be analyzed by the 'Pathfinder' program for prospective use in the alternative missions thus far defined encompass aerobraking, space-based chemical engines, cryogenic fluid systems, space nuclear power, nuclear-thermal and nuclear-electric propulsion, high-rate communications, and planetary photonics. Extensive use of robotics is anticipated in both the lunar and Martian components of the missions being studied.

O'Handley, Douglas A.↗
NASA NTRS1991

Computational aspects of chemically reacting flows

An implicit, time-dependent approach is taken to solve the inviscid conservative equations in a vertex-based finite-volume formulation. The convective fluxes are estimated by a modified Riemann solver, and higher-order accuracy is obtained by means of the MUSCL. Implicit techniques are adopted to deal with the equation stiffness as a result of the clustered grid and chemical source term. The real-gas Roe matrix and the ADI and LU schemes have been tested on the sample problems: hypersonic flow over blunt configurations, such as the forebody of a double ellipse, and the near wake of a conic aerobrake. Temperature distribution and standoff distance are validated against the shock-fitting, central-differencing results. Equilibrium temperature may be recovered by artificially increasing the chemical rates at the wall. The present method satisfactorily resolves the flow structure, including the strong expansion behind the flat base. The relative merits and performance of the real-gas TVD and implicit schemes are discussed briefly.

Li, C. P.↗
NASA NTRS1991

New space vehicle archetypes for human planetary missions

Contemporary, archetypal, crew-carrying spacecraft concepts developed for NASA are presented for: a lunar transportation system, two kinds of Mars landers, and five kinds of Mars transfer vehicles. These cover the range of propulsion technologies and mission modes of interest for the Space Exploration Initiative, and include both aerobraking and artificial gravity as appropriate. They comprise both upgrades of extant archetypes and completely new ones. Computer solid models, configurations and mass statements are presented for each.

Sherwood, Brent↗
NASA NTRS1991

Vibrational relaxation and dissociation in nitrogen

Calculations of the vibrational and dissociation transition probabilities are made for N2-N2 and N2-N collisions by means of a semiclassical N-state approximation. The flaws in previous techniques are reviewed, with special attention given to the prediction of overtones. The method presented ignores the effects of molecular rotation and employs a revised extended Rydberg intermolecular potential to describe diatom-diatom and diatom-atom collisions. The collision velocities investigated exhibit probabilities of less than unity by means of the N-state method. The continuum is quantized to treat dissociation, and the collision results demonstrate probability enhancements for V-V-T transitions in both bound-bound and bound-free transitions. The technique is of particular interest for the theoretical modeling of reentry flows such as those encountered in aerobraking maneuvers.

Varghese, Philip L.↗
NASA NTRS1991

Trim angle measurements in free-flight facilities

The aerodynamic cofficients and trim angle for an aerobrake at Mach 9.2 and 11.8 were found using a combination of experiment and computation. Free-flight tests were performed at NASA Ames Research Center's Hypervelocity Free-Flight Aerodynamic Facility, and the forebody pressure distribution was calculated using a three-dimensional Navier-Stokes code with an effective specific heat ratio. Using the computed drag, lift, and moments to prescribe the number of terms in the aerodynamic coefficient expansions and to specify the values of the higher order terms, the experimental aerodynamic coefficients and trim angle were found using a six-degree-of-freedom, weighted, least-squares analysis. The experimental and computed aerodynamic coefficients and trim angles are in good agreement. The trim angle obtained from the free-flight tests, 14.7 deg, differs from the design trim angle, 17 deg, and from the Langley wind tunnel results, 12 deg in air and 17 deg in CF4. These differences are attributable to real-gas effects.

Yates, Leslie A.↗
NASA NTRS1991

Technology needs for lunar and Mars space transfer systems

The determination of appropriate space transportation technologies and operating modes is discussed with respect to both lunar and Mars missions. Three levels of activity are set forth to examine the sensitivity of transportation preferences including 'minimum,' 'full science,' and 'industrialization and settlement' categories. High-thrust-profile missions for lunar and Mars transportation are considered in terms of their relative advantages, and transportation options are defined in terms of propulsion and braking technologies. Costs and life-cycle cost estimates are prepared for the transportation preferences by using a parametric cost model, and a return-on-investment summary is given. Major technological needs for the programs are listed and include storable propulsion systems; cryogenic engines and fluids management; aerobraking; and nuclear thermal, nuclear electric, electric, and solar electric propulsion technologies.

Woodcock, Gordon R.↗
NASA NTRS1991

Multimegawatt electric propulsion for Mars missions

This paper summarizes an evaluation of multimegawatt (MMW) nuclear electric propulsion (NEP) and solar electric propulsion (SEP) for a piloted Mars exploration scenario. The figures of merit used in this study were total initial mass in low earth orbit (IMLEO) and the trip time. The MMW NEP and SEP systems to an aerobraked chemical (O2/H2) propulsion system are compared. A good performance compromise between a low IMLEO and short trip time can be obtained using MMW NEP systems; they can be both lighter and faster than the baseline chemical system. However, a MMW SEP system does not appear capable of providing as short a trip time as MMW NEP, in part due to the higher specific mass and non-constant power output of a SEP system.

Frisbee, Robert H.↗
NASA NTRS1991

Quick trips to Mars

The design of a Mars Mission Vehicle that would have to be launched by two very heavy lift launch vehicles is described along with plans for a mission to Mars. The vehicle has three nuclear engine for rocket vehicle application (NERVA) boosters with a fourth in the center that acts as a dual mode system. The fourth generates electrical power while in route, but it also helps lift the vehicle out of earth orbit. A Mars Ascent Vehicle (MAV), a Mars transfer vehicle stage, and a Mars Excursion Vehicle (MEV) are located on the front end of this vehicle. Other aspects of this research including aerobraking, heat shielding, nuclear thermal rocket engines, a mars mission summary, closed Brayton cycle with and without regeneration, liquid hydrogen propellant storage, etc. are addressed.

Hornung, R.↗
NASA NTRS1991

Probing Titan's atmosphere with a stellar occultation

The 3 July, 1989 occultation of 28 Sgr by Titan is discussed. The star was readily detectable throughout the occultation, reaching a minimum normalized flux of about 0.05. The occultation probed Titan's atmosphere in a region not studied by the Voyager spacecraft. The region is important for the aerobraking of Titan entry probes, and direct information about its properties is important for the Cassini mission. Occultation data (normalized stellar flux vs universal time) is shown in chart form for NASA supported stations, along with data from a collaborating group at the Wise observatory in Israel. Strong scintillation data of the star is noticeable in the data records, and provides information on waves/turbulence in Titan's high atmosphere.

Hubbard, W. B.↗
NASA NTRS1991

Trajectory and navigation system design for robotic and piloted missions to Mars

Future Mars exploration missions, both robotic and piloted, may utilize Earth to Mars transfer trajectories that are significantly different from one another, depending upon the type of mission being flown and the time period during which the flight takes place. The use of new or emerging technologies for future missions to Mars, such as aerobraking and nuclear rocket propulsion, may yield navigation requirements that are much more stringent than those of past robotic missions, and are very difficult to meet for some trajectories. This article explores the interdependencies between the properties of direct Earth to Mars trajectories and the Mars approach navigation accuracy that can be achieved using different radio metric data types, such as ranging measurements between an approaching spacecraft and Mars orbiting relay satellites, or Earth based measurements such as coherent Doppler and very long baseline interferometry. The trajectory characteristics affecting navigation performance are identified, and the variations in accuracy that might be experienced over the range of different Mars approach trajectories are discussed. The results predict that three sigma periapsis altitude navigation uncertainties of 2 to 10 km can be achieved when a Mars orbiting satellite is used as a navigation aid.

Thurman, S. W.↗
NASA NTRS1991

End-effector for robotic assembly of welded truss structures in space

In June 1987, work was initiated at LaRC on end-effectors and preloaded joints for robotic truss assembly. This is part of an on-going research effort centered on a test facility that assembles 1 inch x 2 m identical struts into an 8 m diameter x 1.5 m deep platform truss. A detailed description of the test facility was published. The end-effector being used for the LaRC assembly demonstration is quite suitable for the Precision Segmented Reflector or other precision applications. These require high stiffness provided by mechanical joint preloads. Stiffness obtained in this manner is only required and provided over a load range far less than the ultimate strength of the strut tubes. Beyond this useful range, truss behavior is somewhat unpredictable. Mechanically preloaded joints of this type are less suitable for applications such as the Aero Brake where predictable strength and stiffness are required over a greater fraction of the load bearing capacity of component parts. Preliminary studies of the Aerobrake support truss indicate that struts of at least 3 different diameters and various lengths would improve performance. The double-ended end-effector currently in service is designed for only one diameter and length. Anticipated single-ended versions can accommodate varying lengths but not multiple diameters. Tradeoff considerations for welded joints relative to their mechanically preloaded counterparts are presented. Conclusions from this research are as follows: (1) repair by cut and re-weld on the original weld site should be research; (2) welded joints, though repairable, should not be used where high repair frequencies are anticipated; and (3) welded joints should be considered for an Aero Brake truss.

Brewer, William V.↗
NASA NTRS1992

Development and application of computational aerothermodynamics flowfield computer codes

Presented is a collection of papers on research activities carried out during the funding period of October 1991 to March 1992. Topics covered include: blunt body flows in thermochemical equilibrium; thermochemical relaxation in high enthalpy nozzle flow; single expansion ramp nozzle simulations; lunar return aerobraking; line boundary problem for three dimensional grids; and unsteady shock induced combustion.

Venkatapathy, Ethiraj↗
NASA NTRS1992

Fuel optimal maneuver: Experimental testbeds

The objective of this paper is to conduct experiments in fuel optimal propulsive maneuvers of flexible spacecraft in order to verify and extend recently developed theory and apply it to various classes of spacecraft. Topics covered in viewgraph format include: impulse damping control by experimental verification; impulse damping of the SCOLE reflector and mast; fuel optimal control of rotating flexible beam; fuel optimal aerobrake maneuvers.

Meyer, John L.↗
NASA NTRS1991

Non-terrestrial resources of economic importance to earth

The status of research on the importation of energy and nonterrestrial materials is reviewed, and certain specific directions for new research are proposed. New technologies which are to be developed include aerobraking, in situ propellant production, mining and beneficiation of extraterresrrial minerals, nuclear power systems, electromagnetic launch, and solar thermal propulsion. Topics discussed include the system architecture for solar power satellite constellations, the return of nonterrestrial He-3 to earth for use as a clean fusion fuel, and the return to earth of platinum-group metal byproducts from processing of nonterrestrial native ferrous metals.

Lewis, John S.↗
NASA NTRS1991

Transportation analyses for the lunar-Mars initiative

This paper focuses on certain results of an ongoing NASA-sponsored study by Boeing, including (1) a series of representative space exploration scenarios; (2) the levels of effort required to accomplish each; and (3) a range of candidate transportation system as partial implementations of the scenarios. This effort predated release of the Synthesis report; the three levels of activity described are not responses to the Synthesis architectures. These three levels (minimum, median and ambitious), do envelope the range of scope described in the four Synthesis architecture models. The level of analysis detail was to the current known level of detail of transportation hardware systems and mission scenarios. The study did not include detailed analysis of earth-to-orbit transportation, surface systems, or tracking and communications systems. The influence of earth-to-orbit systems was considered in terms of delivery capacity and cost. Aspects of additional options, such as in situ resource utilization are explored as needed to indicate potential benefits. Results favored cryogenic chemical propulsion for low activity levels and undemanding missions (such as cargo and some lunar missions), nuclear thermal propulsion for median activity levels similar to the Synthesis architectures, and nuclear thermal propulsion with aerobraking or nuclear electric propulsion for high activity levels. Solar electric propulsion was seen as having an important role if the present high unit cost (i.e., dollars per watt) of space photovoltaics could be reduced by a factor of five or more at production rates of megawatts per year.

Woodcock, Gordon R.↗
NASA NTRS1992

How shall we go to Mars? A review of mission scenarios

Four scenarios for initial Mars missions are examined in this overview of strategies. The scenarios are compared to determine the most effective option with respect to the effects of reduced gravity, exposure to space radiation, and cost. Mission cost is evaluated based on initial mass in earth orbit for the four mission types: classes-opposition, conjunction, fast-transfer conjunction, and split sprint. The reduced gravitational force on the Martian surface is considered to be a critical factor because the physical deconditioning at 3/8 earth gravity is assumed to approximate that of zero gravity. Exposure to radiation is not determined to be a definite discriminator because none of the scenarios exceed established limits. The split sprint is championed based on the high energy transfers considered and with chemical propulsion (or preferably nuclear thermal propulsion) and aerobraking.

Walberg, Gerald↗