Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ACTIVATION ENERGY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Impact of carbon nanotube length on electron transport in aligned carbon nanotube networks

Here, we quantify the electron transport properties of aligned carbon nanotube (CNT) networks as a function of the CNT length, where the electrical conductivities may be tuned by up to 10× with anisotropies exceeding 40%. Testing at elevated temperatures demonstrates that the aligned CNT networks have a negative temperature coefficient of resistance, and application of the fluctuation induced tunneling model leads to an activation energy of ≈14 meV for electron tunneling at the CNT-CNT junctions. Since the tunneling activation energy is shown to be independent of both CNT length and orientation, the variation in electron transport is attributed to the number of CNT-CNT junctions an electron must tunnel through during its percolated path, which is proportional to the morphology of the aligned CNT network.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of a high electric field on the conductivity of MnGa{sub 2}S{sub 4}, MnIn{sub 2}S{sub 4}, and MnGaInS{sub 4} single crystals

The results of studying the effect of a high electric field on the conductivity of MnGa{sub 2}S{sub 4}, MnIn{sub 2}S{sub 4}, and MnGaInS{sub 4} single crystals are reported. The activation energy is determined in high and low electric fields. It is established that the decrease in the activation energy with increasing the external voltage is associated with decreasing the depth of the potential well, in which the electron is located.

36 MATERIALS SCIENCE↗

Plasma atomic layer etching using conventional plasma equipment

The decrease in feature sizes in microelectronics fabrication will soon require plasma etching processes having atomic layer resolution. The basis of plasma atomic layer etching (PALE) is forming a layer of passivation that allows the underlying substrate material to be etched with lower activation energy than in the absence of the passivation. The subsequent removal of the passivation with carefully tailored activation energy then removes a single layer of the underlying material. If these goals are met, the process is self-limiting. A challenge of PALE is the high cost of specialized equipment and slow processing speed. In this work, results from a computational investigation of PALE will be discussed with the goal of demonstrating the potential of using conventional plasma etching equipment having acceptable processing speeds. Results will be discussed using inductively coupled and magnetically enhanced capacitively coupled plasmas in which nonsinusoidal waveforms are used to regulate ion energies to optimize the passivation and etch steps. This strategy may also enable the use of a single gas mixture, as opposed to changing gas mixtures between steps.

36 MATERIALS SCIENCE↗

High temperature oxidation behavior of Ni-based superalloy GH202

The isothermal oxidation kinetic and oxidation behavior of Ni-based superalloy GH202 were investigated at temperatures from 800 °C to 1100 °C. The microstructure of GH202 was characterized by scanning electron microscope (SEM) and electron back-scattered diffraction (EBSD). The composition and morphologies of oxide scales of the surface and cross-section samples were examined by X-ray diffraction (XRD), electron probe microanalysis (EPMA), and SEM combined with energy-dispersive spectroscopy (EDS). The results show that the growth of the oxide scales on GH202 obeyed a parabolic law with an activation energy of 247.8 KJ·mol{sup −1} from 800 °C to 1100 °C. The continuous and dense oxide scales that formed at 800 °C and 900 °C were composed of Cr{sub 2}O{sub 3}, NiCr{sub 2}O{sub 4} and a small amount of TiO{sub 2}. Beneath the oxide scales, aluminum-rich oxides formed along the grain boundaries due to internal oxidation. After treatment at 1000 °C for 150 h, the oxide scale was separated into two layers, the outer layer with sparse holes that was mainly composed of Cr{sub 2}O{sub 3} and TiO{sub 2} and an inner layer of dense Cr{sub 2}O{sub 3}. At 1100 °C for 100 h the outer layer was spalled, due to the looser oxide scale with large blocks of TiO{sub 2} and NiCr{sub 2}O{sub 4} which provided channels for oxygen diffusion. - Highlights: •Isothermal oxidation kinetic of GH202 obeys a parabolic law from 800 °C to 1100 °C. •The activation energy of GH202 is closed to the diffusion activation of Cr{sup 3+}. •The evolution process of oxide scales from 800 °C to 1100 °C is displayed by EPMA. •The oxidation behavior of GH202 is mainly controlled by Cr{sup 3+} and Ti{sup 4+}.

36 MATERIALS SCIENCE↗

Temperature-programmed elimination of tritium in coal labeled by tritiated gaseous hydrogen

The hydrogen exchange of an Argonne Pocahontas No. 3 (POC) coal with tritiated gaseous hydrogen in the presence of a Pt/Al{sub 2}O{sub 3} catalyst was carried out using a fixed-bed reactor at a temperature range of 200-250{sup o}C. Then, the tritiated coal sample was re-exchanged with hydrogen in a gaseous hydrogen atmosphere at different raising temperature rates. The changes in radioactivity of tritium releasing from the tritium-labeled coal sample in the temperature-programmed elimination (TPE) of tritium was monitored by a radioanalyzer in situ. The release profile of tritium was fit using three Gaussian distribution functions in TPE. On the basis of the waveform analysis, the amounts and activation energies of the hydrogen exchange for every type of exchangeable hydrogen were estimated. The values of exchange activation energies are 8.8 {+-} 0.5, 10.7 {+-} 0.5, and 16.3 {+-} 0.5 kcal/mol for three types of exchangeable hydrogen, respectively. The amount of type-I hydrogen was independent of the exchange reaction temperature. In contrast to this, the amount of types II and III of exchangeable hydrogen increased with an increasing exchange temperature, suggesting that the amount of types II and III of hydrogen in the coal is dependent upon the exchange temperature. 35 refs., 8 figs., 5 tabs.

01 COAL, LIGNITE, AND PEAT↗

Dilute hydrogen plasma cleaning of boron from silicon after etching of HfO{sub 2} films in BCl{sub 3} plasmas: Substrate temperature dependence

The authors have investigated the effects of elevated substrate temperature (T{sub s}) on cleaning of boron residues from silicon substrates in 1%H{sub 2}-Ar plasmas, following etching of HfO{sub 2} in BCl{sub 3} plasmas. Vacuum-transfer x-ray photoelectron spectroscopy (XPS) provided a measure of total B removal rates, as well as information on individual BCl{sub x}O{sub y} moities. B cleaning rates increased with T{sub s} in an Arrhenius manner, with an apparent activation energy of 1.7 kcal/mol. Conversely, the Si etching rate decreased with increasing substrate temperature with an apparent activation energy of -0.8 kcal/mol. Therefore, when considering selectivity with respect to Si etching, it is advantageous to remove B at higher T{sub s}. For example, at T{sub s}=235 deg. C, {approx}90% of B is cleaned from Si in 10 s, while <1.5 nm of Si is removed. An apparent diffusion of H into the near-surface region of Si at higher temperatures, detected indirectly by a shift and broadening of the Si(2p) XPS peak, may limit the maximum optimum substrate temperature, however. It was also found that Si does not etch in 1%H{sub 2}/Ar plasmas if an oxide layer is present.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Comprehensive study of the electronic and optical behavior of highly degenerate p-type Mg-doped GaN and AlGaN

The bulk and 2-dimensional (2D) electrical transport properties of heavily Mg-doped p-type GaN films grown on AlN buffer layers by Metal Modulated Epitaxy are explored. Distinctions are made between three primary p-type conduction mechanisms: traditional valence band conduction, impurity band conduction, and 2D conduction within a 2D hole gas at a hetero-interface. The bulk and 2D contributions to the overall carrier transport are identified and the relative contributions are found to vary strongly with growth conditions. Films grown with III/V ratio less than 1.5 exhibit high hole concentrations exceeding 2 × 10{sup 19} cm{sup −3} with effective acceptor activation energies of 51 meV. Films with III/V ratios greater than 1.5 exhibit lower overall hole concentrations and significant contributions from 2D transport at the hetero-interface. Films grown with III/V ratio of 1.2 and Mg concentrations exceeding 2 × 10{sup 20} cm{sup −3} show no detectable inversion domains or Mg precipitation. Highly Mg-doped p-GaN and p-AlGaN with Al fractions up to 27% similarly exhibit hole concentrations exceeding 2 × 10{sup 19} cm{sup −3}. The p-GaN and p-Al{sub 0.11}Ga{sub 0.89}N films show broad ultraviolet (UV) photoluminescence peaks, which intercept the valence band, supporting the presence of a Mg acceptor band. Finally, a multi-quantum-well light-emitting diode (LED) and p-i-n diode are grown, both of which demonstrate rectifying behavior with turn-on voltages of 3–3.5 V and series resistances of 6–10 Ω without the need for any post-metallization annealing. The LED exhibits violet-blue luminescence at 425 nm, while the p-i-n diode shows UV luminescence at 381 nm, and both devices still show substantial light emission even when submerged in liquid nitrogen at 77 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Deep chalcogen donors and electron localization in aluminum nitride

Abstract We show with hybrid density functional theory calculations that chalcogen donors other than oxygen (i.e. S N , Se N , and Te N ) give rise to deep donor states in aluminum nitride. These donors trap a localized electron in their neutral charge state, leading to deep ( + / 0 ) donor levels that are 0.45 eV or more from the conduction-band edge. As such, this behavior is distinct from the DX behavior leads to deep (+/−) levels which affects other donors such as O N and Si Al . We highlight how these results hint at the formation of small electron polarons in AlN, which are found to be unstable in the bulk, but metastable when bound to donor dopants like Si Al and the chalocogens, with activation energies on the order of 0.2–0.3 eV. These results indicate that S, Se, and Te are not shallow donor dopants in aluminum nitride and identify origins of the experimentally observed ∼200–300 meV activation energies for dopant activation in donor-doped samples.

aluminum nitride↗

Analytic model of dislocation density evolution in fcc polycrystals accounting for dislocation generation, storage, and dynamic recovery mechanisms

Here, an analytic model of the evolution of dislocation density in fcc polycrystals is described. The evolution equations approximately account for most known dislocation storage, dynamic recovery, and dislocation generation mechanisms in fcc polycrystals. Specifically, the model incorporates network (forest) and grain boundary storage, mobile-network and mobile–mobile annihilation, screw–screw annihilation via athermal and thermal single cross-slip, generation by double cross-slip (Koehler mechanism, including dipole formation), Frank-Read sources, grain boundary nucleation, and mobile–immobile dislocation nucleation due to shock loading. Single cross-slip is assumed to proceed through the Friedel–Escaig (FE) mechanism; the corresponding activation energy is calculated using a modified FE model. The activation energy for double cross-slip is calculated for the first time by extending the FE model. The exact evolution equations are integro-differential equations, and as such are difficult to implement in a code; hence, the evolution equations are simplified by making several approximations. Preliminary results on copper are presented, including comparisons to experimental data.

36 MATERIALS SCIENCE↗

A data driven approach for cross-slip modelling in continuum dislocation dynamics

Cross-slip is a thermally activated process by which screw dislocation changes its glide plane to another slip plane sharing the same Burgers vector. The rate at which this process happens is determined by a Boltzmann type expression that is a function of the screw segment length and the stress acting on the dislocation. In continuum dislocation dynamics (CDD), the information regarding the length of the screw dislocation segment and local stress state on dislocations are lost due to the coarse-grained representation of the density. Here, in this work, a data driven approach to characterize the lost information by analyzing the discrete dislocation configurations is proposed to enable cross-slip modeling in the CDD framework in terms of the coarse-grained dislocation density and stress fields. The analysis showed that the screw segment length follows an exponential distribution, and the stress fluctuations, defined as the difference between the stress on the dislocations and the mean field stress in CDD, follows a Lorentzian distribution. A novel approach for cross slip implementation in CDD employing the screw segment length and stress fluctuation statistics was proposed and rigorously tested by comparing the CDD cross-slip rates with discrete dislocation dynamics (DDD) rates. This approach has been applied in conjunction with three cross-slip models used in DDD simulations differing mainly in the functional form of cross slip activation energy. It was found that different cross-slip activation energy formulations yielded different cross-slip rates, yet the effect on mechanical stress-strain response and dislocation density evolution was minimal for the [001] type loading.

42 ENGINEERING↗

Mechanism of the Accelerated Water Formation Reaction under Interfacial Confinement

Subnanoscale spaces at the interface between weakly coupled thin films and their metal supports offer exciting opportunities for studying chemical reactions under confinement. Here, we investigated the kinetics of water formation (from hydrogen and chemisorbed oxygen) in the confined space at the interface between bilayer (BL) silica and a Ru(0001) support, compared to the reaction on the bare Ru(0001) surface. Ambient pressure X-ray photoelectron spectroscopy (AP-XPS) experiments were carried out at different temperatures at elevated pressures of H 2 to follow the reaction kinetics. The apparent activation energy at the BL-silica/Ru(0001) interface was found to be 0.38 eV lower than that on bare Ru(0001), consistent with a recent report by Prieto et al. (Angew. Chem., Int. Ed.2018, 57(28), 8749–8753) carried out at lower H 2 pressures using low-energy electron microscopy. Density functional theory calculations revealed that the rate-limiting step in the direct hydrogenation pathway on the Ru(0001) surface is the first hydrogen addition step (*H + *O ↔ *OH). The confinement at the BL-silica/Ru(0001) interface only marginally affects the energy barrier of the first hydrogen addition. Instead, it activates an alternative disproportionation reaction pathway (*H 2 O + *O ↔ 2*OH). On the bare Ru(0001) surface, the disproportionation pathway can only occur at cryogenic temperatures or under high water vapor pressures. However, the presence of the BL-silica increases the desorption barrier for water molecules at the interface. The increased residence time allows trapped water molecules to react with chemisorbed oxygen to produce two *OH per H 2 O with an activation energy 0.25 eV lower than that of the first hydrogen addition step. Finally, this work reveals the origin of the observed accelerated water formation reaction at the BL-silica/Ru(0001) interface in the low-temperature regime (T < 350 K) and points to a route to engineer chemical reaction pathways by leveraging subnanoscale confined spaces at metal–oxide interfaces.

36 MATERIALS SCIENCE↗

Dielectric properties of Apollo 14 lunar samples.

Laboratory characterization of dielectric properties of lunar samples 14301,41, 14310,75, 14318,30 and 14321,163 is made. Our measurements of dielectric constants and losses were made over a range of frequency from 100 Hz to 10 MHz and temperature from 77 to 473 K by two-terminal capacitance substitution methods. The dielectric behavior of these samples is generally similar to other lunar samples from Apollo 11 and Apollo 12 sites when these samples are free from absorbed moisture. As did sample 12002,58, sample 14310,75 showed a distinctive dispersion that may be associated with the presence of water, and different values of the activation energy for conduction as the temperature was varied. The activation energies range from about 0.03 to 0.5 eV.

Chung, D. H.↗

A reanalysis of the HCO(+)/HOC(+) abundance ratio in dense interstellar clouds

New theoretical and experimental results have prompted a reinvestigation of the HCO(+)/HOC(+) abundance ratio in dense interstellar clouds. These results pertain principally but not exclusively to the reaction between HOC(+) and H2, which was previously calculated by DeFrees et al. (1984) to possess a large activation energy barrier. New calculations, reported here, indicate that this activation energy barrier is quite small and may well be zero. In addition, experimental results at higher energy and temperature indicate strongly that the reaction proceeds efficiently at interstellar temperatures. If HOC(+) does indeed react efficiently with H2 in interstellar clouds, the calculated HCO(+)/HOC(+) abundance ratio rises to a substantially greater value under standard dense cloud conditions than is deduced via the tentative observation of HOC(+) in Sgr B2.

Jarrold, M. F.↗

Oxidative processes in soybean and pea seeds: effect of light, temperature, and water content

Oxidative processes are probable determinants of longevity of seeds in storage. Measurements of actual oxygen uptake rates were made for soybean and pea seeds as a comparison of short and long lived seeds when light, temperature, and moisture contents were varied. In both peas and soybeans, the oxygen uptake was depressed at low temperatures (<16 degrees C) and low water contents (< 0.25 gram H2O per gram dry weight). Apparent activation energies under these conditions are very high, while apparent activation energies of seeds at higher water contents and at temperatures greater than 22 degrees C are much less. Light enhances the level of oxygen uptake in pea, but reduces the level of oxygen uptake in soybean. The complexities of the interactions of oxygen uptake with environmental conditions in soybean compared to pea suggest that oxidative processes occur in soybean at low water contents, but are essentially absent in pea. It is suggested that the additional oxidative processes in soybean with moisture contents between 0.10 and 0.24 gram per gram may contribute to the poorer longevity of soybean seed compared to pea seed.

NASA Program Space Biology↗

Oxygen migration enthalpy likely limits oxide precipitate dissolution during tabula rasa

In industrial silicon solar cells, oxygen-related defects lower device efficiencies by up to 20% (rel.). In order to mitigate these defects, a high-temperature homogenization anneal called tabula rasa (TR) that has been used in the electronics industry is now proposed for use in solar-grade wafers. This work addresses the kinetics of tabula rasa by elucidating the activation energy governing oxide precipitate dissolution, which is found to be 2.6 ± 0.5 eV. This value is consistent within uncertainty to the migration enthalpy of oxygen interstitials in silicon, implying TR to be kinetically limited by oxygen point-defect diffusion. Furthermore, this large activation energy is observed to limit oxygen precipitate dissolution during standard TR conditions, suggesting that more aggressive annealing conditions than conventionally used are required for complete bulk microdefect mitigation.

14 SOLAR ENERGY↗

Step Effects on the Dissociation of NO on Close-Packed Rhodium Surfaces

The dissociation paths and thermochemistry of nitric oxide (NO) on flat, close-packed Rh(111) and on stepped Rh(211) surfaces have been investigated. Self-consistent, periodic, density functional theory (DFT-GGA) calculations, using both PW91 and RPBE exchange-correlation functionals, have been employed to determine binding geometries and binding energies for the initial, intermediate, and final states, and for the transition states along each reaction pathway studied. The order of the calculated chemisorption energies for the atomic and molecular species, with the most stable listed first, is N₂₁₁ > N₁₁₁ > O₂₁₁ > O₁₁₁ > NO₂₁₁ > NO₁₁₁. The effective activation energy barriers and the reaction energies for NO dissociation were also obtained for both Rh(111) and Rh(211). The presence of steps leads to an increase in the reaction exothermicity and to a decrease in the effective activation energy. A comparison between experimental data and these results suggests that NO dissociation at defect sites may dominate the process on close-packed Rh single crystal surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, structural and electrical properties of [C{sub 2}H{sub 10}N{sub 2}][(SnCl(NCS){sub 2}]{sub 2}

Synthesis, structural and electrical properties are given for a new organic stannous pseudo halide material. The structure of the [C{sub 2}H{sub 10}N{sub 2}][(SnCl(NCS){sub 2}]{sub 2} reveals that the adjacent Sn(II) centres are bridged by a pair of SCN{sup -} anions to form a 1-D array giving rise to the anionic chains (SnCl(NCS){sub 2}){sub n}{sup n-}. These chains are themselves interconnected by means of N-H Horizontal-Ellipsis Cl(S) hydrogen bonds originating from the organic cation [(NH{sub 3}){sub 2}(CH{sub 2}){sub 2}]{sup 2+}. The AC impedance measurements were performed as a function of both frequency and temperature. The electrical conduction and dielectric relaxation have been studied. The activation energy associated with the electrical relaxation determined from the electric modulus spectra was found close to that of the activation energy obtained for DC conductivity. The conduction mechanisms are attributed to the quantum mechanical tunneling model in phase I and to the proton hopping among hydrogen vacancies in phase II. - Graphical abstract: Atomic coordination in [C2H10N2][SnCl(NCS)2)2]. Highlights: Black-Right-Pointing-Pointer X-ray diffraction analysis shows the 1D network character of the structure. Black-Right-Pointing-Pointer DSC experiments show a phase transition at 336 K. Black-Right-Pointing-Pointer The AC conductivity is interpreted in terms of Jonsher's law. Black-Right-Pointing-Pointer Two conduction mechanisms are proposed for phase I and II.

36 MATERIALS SCIENCE↗

Enhanced Menshutkin S N 2 Reactivity in Mesoporous Silica: The Influence of Surface Catalysis and Confinement

A significant enhancement in the Menshutkin S N 2 reaction between 1-methylimidazole (MeIm) and methyl thiocyanate (MeSCN) is observed when the reaction is confined in the nanoscale silica pores of MCM41 and SBA15. The experiments in the silica pores are conducted without surrounding bulk reaction mixture. The influences of temperature, pore radius, and surface chemistry on the kinetics of the confined reaction are analyzed with time-dependent infrared spectroscopy, molecular dynamics simulations, and ab initio calculations. The rate constant of the pseudo-first order reaction increases with decreasing pore size, and the activation energy is found to decrease by 5.6 kJ/mol in the smallest pore studied (2.8 nm) relative to the bulk reaction. The rate constant dependence on pore size is accurately described by a two-state model in which molecules within the 4.6 Å interfacial layer experience a 2.4-fold rate constant increase relative to those reacting at the bulk rate further away from the interface. The removal of polar silanol groups from the silica surface via passivation with trimethylsilyl chloride results in bulk-like kinetics despite a reduction in the pore diameter, demonstrating the role of silanols as catalytic sites. Here, electronic structure calculations of the energy profile on a model silica surface confirm that silanol groups, particularly those of the vicinal type, can reduce the activation energy and reaction endothermicity through the donation of hydrogen bonds to the reactant, transition state, and product complexes.

36 MATERIALS SCIENCE↗