Results for “wave data” — Page 23

NASA NTRS1993

Data compression for the Cassini radio and plasma wave instrument

The Cassini Radio and Plasma Wave Science experiment will employ data compression to make effective use of the available data telemetry bandwidth. Some compression will be achieved by use of a lossless data compression chip and some by software in a dedicated 80C85 processor. A description of the instrument and data compression system are included in this report. Also, the selection of data compression systems and acceptability of data degradation is addressed.

Farrell, W. M.↗

DOE OSTI2024

Performance Testing of an Integrated Magnetic Power Take-Off

A wave energy converter (WEC) and the power take-off (PTO) generator system can be represented by using a mass-spring-dampener model. By incorporating a negative stiffness spring within the PTO, the overall stiffness of the PTO can be lowered allowing the impedance of the PTO to be more closely matched with the WEC. By designing for impedance matching the WEC can greatly enhance its power generation capability. This project has involved the design, fabrication and testing of a new type of linear-stroke length and rotary stroke length adjustable negative stiffness magnetic springs for use within a wave energy converter (WEC). The magnetic springs were studied by using 3-D finite element analysis with the objective of creating high energy density and a long linear stroke length. After the construction and testing of both a proof-of-principle adjustable linear and rotary magnetic spring prototype the rotary (torsional) magnetic spring was selected for scaling up analysis. The selected scaled-up proof-of-principle magnetic spring had a peak torque of 850 Nm with a ±45 degree stroke length. By translating the inner rotor relative to the outer rotor, the stiffness could be adjusted to be either negative or positive stiffness. During this project a magnetic lead screw was also studied, and it was shown that by combining the magnetic lead screw with a linearly translating magnetic spring a very long rotary stroke length could be attained. However, as the magnetic lead screw increased complexity and reduced overall energy density relative to a rotary (torsional) spring, this design approach was not further pursed. Dynamometer testing of the variable stiffness magnetic springs was first completed by Portland State University and following this the magnetic spring performance was independently verified by Sandia National Laboratory (Sandia). A WEC analysis when using a variable stiffness magnetic spring was completed by using the WecOptTool. WecOptTool is an open-source WEC optimization software developed by Sandia that supports efficient power take-off (PTO) and control optimization. Wave condition data from the Oregon PacWave test-site was used in this study. The analysis showed that a WEC with a tunable stiffness value could consistently achieve about 80% of its maximum theoretical power production. The use of a tunable stiffness WEC, rather than zero-stiffness or a constant stiffness WEC was also shown to lead to a smaller maximum PTO force requirement. The variable stiffness magnetic spring was integrated into an experimental WEC developed by Sandia, called a Wave-Bot. Sandia successfully completed water-tank testing of the Wave-Bot at the Navy’s Carderock, Maryland, wave-basin test site. The wave-basin testing helped to experimentally demonstrate the operating capabilities and increased power generation capability of a WEC containing an integrated variable stiffness magnetic spring. A WEC capacity factor analysis was also completed. The capacity factor was defined as the ratio of annual average WEC generator power to the maximum (RMS) generated power. This capacity factor provided a means of identifying the ratio of potential revenue to cost. It was calculated that if a tunable variable stiffness magnetic spring has RMS constraints it could operate with a capacity factor above 30%. This is comparable to a wind turbine’s capacity factor.

16 TIDAL AND WAVE POWER↗

NASA NTRS2000

Observations and Modeling of the Transient General Circulation of the North Pacific Basin

Because of recent progress in satellite altimetry and numerical modeling and the accumulation and archiving of long records of hydrographic and meteorological variables, it is becoming feasible to describe and understand the transient general circulation of the ocean (i.e., variations with spatial scales larger than a few hundred kilometers and time scales of seasonal and longer-beyond the mesoscale). We have carried out various studies in investigation of the transient general circulation of the Pacific Ocean from a coordinated analysis of satellite altimeter data, historical hydrographic gauge data, scatterometer wind observations, reanalyzed operational wind fields, and a variety of ocean circulation models. Broadly stated, our goal was to achieve a phenomenological catalogue of different possible types of large-scale, low-frequency variability, as a context for understanding the observational record. The approach is to identify the simplest possible model from which particular observed phenomena can be isolated and understood dynamically and then to determine how well these dynamical processes are represented in more complex Oceanic General Circulation Models (OGCMs). Research results have been obtained on Rossby wave propagation and transformation, oceanic intrinsic low-frequency variability, effects of surface gravity waves, pacific data analyses, OGCM formulation and developments, and OGCM simulations of forced variability.

McWilliams, James C.↗

NASA NTRS2019

Agile Approach to Assuring the Safety-Critical Embedded Software for NASA's Orion Spacecraft

Human-rated missions like those in NASA's Orion Program continue to grow in complexity. The role of software in achieving ambitious mission objectives has expanded dramatically in the last few decades. Assuring the safety and performance of the embedded flight software is quickly growing beyond the reach of traditional methods and resource levels. The methods used to build these software-dominant systems evolve in an on-going attempt to keep pace with the scope of our ambitions. Agile software development is now commonplace. The long timelines and large batches of work associated with traditional methods are being replaced by rapid delivery of small increments _ as system capabilities are realized in waves. Assurance of these critical software capabilities must therefore conquer an ever-expanding frontier of challenges, and do so with an approach matched to the evolving development methods. This paper recounts the journey of the Orion Independent Verification and Validation (IV&V) team as we addressed this dynamic environment. Widening our aperture to encompass a dramatically larger mission scope, while adjusting our cadence to synchronize with the rapid pace of agile software development, a new approach to IV&V is emerging. This approach is characterized by a sharper focus on mission capabilities, matched with a method to dynamically _follow the risk' as the IV&V team delivers more compelling assurance data in waves. Traditional methods prevalent in IV&V tend to scope the work using artifacts of the development process as they evolve from preliminary to final versions, and the pace of delivery was synchronized with the development timelines prevalent in the waterfall lifecycle. That more static approach is out of phase with the demands of the new environment. Scoping work according to the critical capabilities of the system (rather than artifacts of development) and synchronizing with the rapid pace of agile development, we are moving toward more effective parity with the demands of the environment. We explain the concrete steps we took, the principles that motivated our choices, and the results we have achieved to date.

Capability based assurance↗

DOE OSTI2025

2022 Central California Travel Study

# 2022 Central California Travel Study The 2022 Central California Travel Study collected demographic and travel pattern information to better understand household travel behavior in the state’s San Joaquin Valley region. ## Data Collection Agency The Fresno Council of Governments conducted the household travel study in collaboration with metropolitan planning organizations in Fresno, Kern, Kings, Madera, Merced, San Joaquin, Stanislaus, and Tulare counties in California. ## Survey Methodology The two-part study consisted of a survey and a travel diary. The survey gathered data on household demographic composition and typical travel behaviors. The travel diary gathered individual travel data during a specified travel period for all members of a given household. ## Travel Diary Methods Households with smartphones were encouraged to complete their travel diaries using the rMove smartphone app for up to seven consecutive days. Households without smartphones or those unwilling to participate via smartphone completed their travel diaries online (using the web-version of rMove) or by calling the survey call center. These households reported travel for one day (Tuesday, Wednesday, or Thursday). ## Recruitment Sampling Methods The majority of the recruitment was conducted via address-based sampling, a type of probability sampling, with a focus on reaching county-level targets in collaboration with metropolitan planning organizations in the region. Supplemental sampling methods, primarily non-probability, were employed during all waves of data collection to improve survey representation. The supplemental sample included targeted outreach to hard-to-survey populations via transit rider email lists; local housing authorities; Nichols Research, a California-based market research firm; and the Ipsos™ KnowledgePanel, an online random probability panel. See the documentation for more information about sampling and weighting. ## Survey Records, Data, and Documentation In total, 7,406 households completed 19,084 surveys representing 150,012 trips across 42,567 person-days.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2025

2022 Central California Travel Study

# 2022 Central California Travel Study The 2022 Central California Travel Study collected demographic and travel pattern information to better understand household travel behavior in the state’s San Joaquin Valley region. ## Data Collection Agency The Fresno Council of Governments conducted the household travel study in collaboration with metropolitan planning organizations in Fresno, Kern, Kings, Madera, Merced, San Joaquin, Stanislaus, and Tulare counties in California. ## Survey Methodology The two-part study consisted of a survey and a travel diary. The survey gathered data on household demographic composition and typical travel behaviors. The travel diary gathered individual travel data during a specified travel period for all members of a given household. ## Travel Diary Methods Households with smartphones were encouraged to complete their travel diaries using the rMove smartphone app for up to seven consecutive days. Households without smartphones or those unwilling to participate via smartphone completed their travel diaries online (using the web-version of rMove) or by calling the survey call center. These households reported travel for one day (Tuesday, Wednesday, or Thursday). ## Recruitment Sampling Methods The majority of the recruitment was conducted via address-based sampling, a type of probability sampling, with a focus on reaching county-level targets in collaboration with metropolitan planning organizations in the region. Supplemental sampling methods, primarily non-probability, were employed during all waves of data collection to improve survey representation. The supplemental sample included targeted outreach to hard-to-survey populations via transit rider email lists; local housing authorities; Nichols Research, a California-based market research firm; and the Ipsos™ KnowledgePanel, an online random probability panel. See the documentation for more information about sampling and weighting. ## Survey Records, Data, and Documentation In total, 7,406 households completed 19,084 surveys representing 150,012 trips across 42,567 person-days.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2025

2022 Central California Travel Study

# 2022 Central California Travel Study The 2022 Central California Travel Study collected demographic and travel pattern information to better understand household travel behavior in the state’s San Joaquin Valley region. ## Data Collection Agency The Fresno Council of Governments conducted the household travel study in collaboration with metropolitan planning organizations in Fresno, Kern, Kings, Madera, Merced, San Joaquin, Stanislaus, and Tulare counties in California. ## Survey Methodology The two-part study consisted of a survey and a travel diary. The survey gathered data on household demographic composition and typical travel behaviors. The travel diary gathered individual travel data during a specified travel period for all members of a given household. ## Travel Diary Methods Households with smartphones were encouraged to complete their travel diaries using the rMove smartphone app for up to seven consecutive days. Households without smartphones or those unwilling to participate via smartphone completed their travel diaries online (using the web-version of rMove) or by calling the survey call center. These households reported travel for one day (Tuesday, Wednesday, or Thursday). ## Recruitment Sampling Methods The majority of the recruitment was conducted via address-based sampling, a type of probability sampling, with a focus on reaching county-level targets in collaboration with metropolitan planning organizations in the region. Supplemental sampling methods, primarily non-probability, were employed during all waves of data collection to improve survey representation. The supplemental sample included targeted outreach to hard-to-survey populations via transit rider email lists; local housing authorities; Nichols Research, a California-based market research firm; and the Ipsos™ KnowledgePanel, an online random probability panel. See the documentation for more information about sampling and weighting. ## Survey Records, Data, and Documentation In total, 7,406 households completed 19,084 surveys representing 150,012 trips across 42,567 person-days.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2025

2022 Central California Travel Study

# 2022 Central California Travel Study The 2022 Central California Travel Study collected demographic and travel pattern information to better understand household travel behavior in the state’s San Joaquin Valley region. ## Data Collection Agency The Fresno Council of Governments conducted the household travel study in collaboration with metropolitan planning organizations in Fresno, Kern, Kings, Madera, Merced, San Joaquin, Stanislaus, and Tulare counties in California. ## Survey Methodology The two-part study consisted of a survey and a travel diary. The survey gathered data on household demographic composition and typical travel behaviors. The travel diary gathered individual travel data during a specified travel period for all members of a given household. ## Travel Diary Methods Households with smartphones were encouraged to complete their travel diaries using the rMove smartphone app for up to seven consecutive days. Households without smartphones or those unwilling to participate via smartphone completed their travel diaries online (using the web-version of rMove) or by calling the survey call center. These households reported travel for one day (Tuesday, Wednesday, or Thursday). ## Recruitment Sampling Methods The majority of the recruitment was conducted via address-based sampling, a type of probability sampling, with a focus on reaching county-level targets in collaboration with metropolitan planning organizations in the region. Supplemental sampling methods, primarily non-probability, were employed during all waves of data collection to improve survey representation. The supplemental sample included targeted outreach to hard-to-survey populations via transit rider email lists; local housing authorities; Nichols Research, a California-based market research firm; and the Ipsos™ KnowledgePanel, an online random probability panel. See the documentation for more information about sampling and weighting. ## Survey Records, Data, and Documentation In total, 7,406 households completed 19,084 surveys representing 150,012 trips across 42,567 person-days.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2025

2022 Central California Travel Study

# 2022 Central California Travel Study The 2022 Central California Travel Study collected demographic and travel pattern information to better understand household travel behavior in the state’s San Joaquin Valley region. ## Data Collection Agency The Fresno Council of Governments conducted the household travel study in collaboration with metropolitan planning organizations in Fresno, Kern, Kings, Madera, Merced, San Joaquin, Stanislaus, and Tulare counties in California. ## Survey Methodology The two-part study consisted of a survey and a travel diary. The survey gathered data on household demographic composition and typical travel behaviors. The travel diary gathered individual travel data during a specified travel period for all members of a given household. ## Travel Diary Methods Households with smartphones were encouraged to complete their travel diaries using the rMove smartphone app for up to seven consecutive days. Households without smartphones or those unwilling to participate via smartphone completed their travel diaries online (using the web-version of rMove) or by calling the survey call center. These households reported travel for one day (Tuesday, Wednesday, or Thursday). ## Recruitment Sampling Methods The majority of the recruitment was conducted via address-based sampling, a type of probability sampling, with a focus on reaching county-level targets in collaboration with metropolitan planning organizations in the region. Supplemental sampling methods, primarily non-probability, were employed during all waves of data collection to improve survey representation. The supplemental sample included targeted outreach to hard-to-survey populations via transit rider email lists; local housing authorities; Nichols Research, a California-based market research firm; and the Ipsos™ KnowledgePanel, an online random probability panel. See the documentation for more information about sampling and weighting. ## Survey Records, Data, and Documentation In total, 7,406 households completed 19,084 surveys representing 150,012 trips across 42,567 person-days.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2025

2022 Central California Travel Study

# 2022 Central California Travel Study The 2022 Central California Travel Study collected demographic and travel pattern information to better understand household travel behavior in the state’s San Joaquin Valley region. ## Data Collection Agency The Fresno Council of Governments conducted the household travel study in collaboration with metropolitan planning organizations in Fresno, Kern, Kings, Madera, Merced, San Joaquin, Stanislaus, and Tulare counties in California. ## Survey Methodology The two-part study consisted of a survey and a travel diary. The survey gathered data on household demographic composition and typical travel behaviors. The travel diary gathered individual travel data during a specified travel period for all members of a given household. ## Travel Diary Methods Households with smartphones were encouraged to complete their travel diaries using the rMove smartphone app for up to seven consecutive days. Households without smartphones or those unwilling to participate via smartphone completed their travel diaries online (using the web-version of rMove) or by calling the survey call center. These households reported travel for one day (Tuesday, Wednesday, or Thursday). ## Recruitment Sampling Methods The majority of the recruitment was conducted via address-based sampling, a type of probability sampling, with a focus on reaching county-level targets in collaboration with metropolitan planning organizations in the region. Supplemental sampling methods, primarily non-probability, were employed during all waves of data collection to improve survey representation. The supplemental sample included targeted outreach to hard-to-survey populations via transit rider email lists; local housing authorities; Nichols Research, a California-based market research firm; and the Ipsos™ KnowledgePanel, an online random probability panel. See the documentation for more information about sampling and weighting. ## Survey Records, Data, and Documentation In total, 7,406 households completed 19,084 surveys representing 150,012 trips across 42,567 person-days.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2025

2022 Central California Travel Study

# 2022 Central California Travel Study The 2022 Central California Travel Study collected demographic and travel pattern information to better understand household travel behavior in the state’s San Joaquin Valley region. ## Data Collection Agency The Fresno Council of Governments conducted the household travel study in collaboration with metropolitan planning organizations in Fresno, Kern, Kings, Madera, Merced, San Joaquin, Stanislaus, and Tulare counties in California. ## Survey Methodology The two-part study consisted of a survey and a travel diary. The survey gathered data on household demographic composition and typical travel behaviors. The travel diary gathered individual travel data during a specified travel period for all members of a given household. ## Travel Diary Methods Households with smartphones were encouraged to complete their travel diaries using the rMove smartphone app for up to seven consecutive days. Households without smartphones or those unwilling to participate via smartphone completed their travel diaries online (using the web-version of rMove) or by calling the survey call center. These households reported travel for one day (Tuesday, Wednesday, or Thursday). ## Recruitment Sampling Methods The majority of the recruitment was conducted via address-based sampling, a type of probability sampling, with a focus on reaching county-level targets in collaboration with metropolitan planning organizations in the region. Supplemental sampling methods, primarily non-probability, were employed during all waves of data collection to improve survey representation. The supplemental sample included targeted outreach to hard-to-survey populations via transit rider email lists; local housing authorities; Nichols Research, a California-based market research firm; and the Ipsos™ KnowledgePanel, an online random probability panel. See the documentation for more information about sampling and weighting. ## Survey Records, Data, and Documentation In total, 7,406 households completed 19,084 surveys representing 150,012 trips across 42,567 person-days.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2025

2022 Central California Travel Study

# 2022 Central California Travel Study The 2022 Central California Travel Study collected demographic and travel pattern information to better understand household travel behavior in the state’s San Joaquin Valley region. ## Data Collection Agency The Fresno Council of Governments conducted the household travel study in collaboration with metropolitan planning organizations in Fresno, Kern, Kings, Madera, Merced, San Joaquin, Stanislaus, and Tulare counties in California. ## Survey Methodology The two-part study consisted of a survey and a travel diary. The survey gathered data on household demographic composition and typical travel behaviors. The travel diary gathered individual travel data during a specified travel period for all members of a given household. ## Travel Diary Methods Households with smartphones were encouraged to complete their travel diaries using the rMove smartphone app for up to seven consecutive days. Households without smartphones or those unwilling to participate via smartphone completed their travel diaries online (using the web-version of rMove) or by calling the survey call center. These households reported travel for one day (Tuesday, Wednesday, or Thursday). ## Recruitment Sampling Methods The majority of the recruitment was conducted via address-based sampling, a type of probability sampling, with a focus on reaching county-level targets in collaboration with metropolitan planning organizations in the region. Supplemental sampling methods, primarily non-probability, were employed during all waves of data collection to improve survey representation. The supplemental sample included targeted outreach to hard-to-survey populations via transit rider email lists; local housing authorities; Nichols Research, a California-based market research firm; and the Ipsos™ KnowledgePanel, an online random probability panel. See the documentation for more information about sampling and weighting. ## Survey Records, Data, and Documentation In total, 7,406 households completed 19,084 surveys representing 150,012 trips across 42,567 person-days.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2025

2022 Central California Travel Study

# 2022 Central California Travel Study The 2022 Central California Travel Study collected demographic and travel pattern information to better understand household travel behavior in the state’s San Joaquin Valley region. ## Data Collection Agency The Fresno Council of Governments conducted the household travel study in collaboration with metropolitan planning organizations in Fresno, Kern, Kings, Madera, Merced, San Joaquin, Stanislaus, and Tulare counties in California. ## Survey Methodology The two-part study consisted of a survey and a travel diary. The survey gathered data on household demographic composition and typical travel behaviors. The travel diary gathered individual travel data during a specified travel period for all members of a given household. ## Travel Diary Methods Households with smartphones were encouraged to complete their travel diaries using the rMove smartphone app for up to seven consecutive days. Households without smartphones or those unwilling to participate via smartphone completed their travel diaries online (using the web-version of rMove) or by calling the survey call center. These households reported travel for one day (Tuesday, Wednesday, or Thursday). ## Recruitment Sampling Methods The majority of the recruitment was conducted via address-based sampling, a type of probability sampling, with a focus on reaching county-level targets in collaboration with metropolitan planning organizations in the region. Supplemental sampling methods, primarily non-probability, were employed during all waves of data collection to improve survey representation. The supplemental sample included targeted outreach to hard-to-survey populations via transit rider email lists; local housing authorities; Nichols Research, a California-based market research firm; and the Ipsos™ KnowledgePanel, an online random probability panel. See the documentation for more information about sampling and weighting. ## Survey Records, Data, and Documentation In total, 7,406 households completed 19,084 surveys representing 150,012 trips across 42,567 person-days.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2025

2022 Central California Travel Study

# 2022 Central California Travel Study The 2022 Central California Travel Study collected demographic and travel pattern information to better understand household travel behavior in the state’s San Joaquin Valley region. ## Data Collection Agency The Fresno Council of Governments conducted the household travel study in collaboration with metropolitan planning organizations in Fresno, Kern, Kings, Madera, Merced, San Joaquin, Stanislaus, and Tulare counties in California. ## Survey Methodology The two-part study consisted of a survey and a travel diary. The survey gathered data on household demographic composition and typical travel behaviors. The travel diary gathered individual travel data during a specified travel period for all members of a given household. ## Travel Diary Methods Households with smartphones were encouraged to complete their travel diaries using the rMove smartphone app for up to seven consecutive days. Households without smartphones or those unwilling to participate via smartphone completed their travel diaries online (using the web-version of rMove) or by calling the survey call center. These households reported travel for one day (Tuesday, Wednesday, or Thursday). ## Recruitment Sampling Methods The majority of the recruitment was conducted via address-based sampling, a type of probability sampling, with a focus on reaching county-level targets in collaboration with metropolitan planning organizations in the region. Supplemental sampling methods, primarily non-probability, were employed during all waves of data collection to improve survey representation. The supplemental sample included targeted outreach to hard-to-survey populations via transit rider email lists; local housing authorities; Nichols Research, a California-based market research firm; and the Ipsos™ KnowledgePanel, an online random probability panel. See the documentation for more information about sampling and weighting. ## Survey Records, Data, and Documentation In total, 7,406 households completed 19,084 surveys representing 150,012 trips across 42,567 person-days.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

NASA NTRS2014

First Searches for Optical Counterparts to Gravitational-Wave Candidate Events

During the Laser Interferometer Gravitational-wave Observatory and Virgo joint science runs in 2009-2010, gravitational wave (GW) data from three interferometer detectors were analyzed within minutes to select GW candidate events and infer their apparent sky positions. Target coordinates were transmitted to several telescopes for follow-up observations aimed at the detection of an associated optical transient. Images were obtained for eight such GW candidates. We present the methods used to analyze the image data as well as the transient search results. No optical transient was identified with a convincing association with any of these candidates, and none of the GW triggers showed strong evidence for being astrophysical in nature. We compare the sensitivities of these observations to several model light curves from possible sources of interest, and discuss prospects for future joint GW-optical observations of this type.

gravitational waves↗

NASA NTRS1978

Ocean wave detection and direction measurements with microwave radars

The application of synthetic aperture microwave radar imagery to the measurement of ocean wave direction and wavelength is discussed and an airborne experiment conducted in preparation for the SEASAT-A satellite mission is presented. Models for radar backscattering are examined and it is concluded that the Bragg-Rice model, which represents the ocean surface as a combination of periodic surfaces so that the dominant backscatter matches some portion of the wave spectrum, appears most useful. The experiment was conducted with airborne X-band and L-band synthetic aperture radar (SAR) and data was compared with that obtained from a pitch-and-roll buoy and an instrument package mounted on a sea sled. SAR data was converted to wave spectra and it was found to match data from the buoy, while SAR data on wave direction agrees to within two degrees with the buoy and to within one degree with the sea sled sensors. Wave direction data taken by two real aperture radars is also presented and shown to agree with airborne photographs.

Teleki, P. G.↗

DOE OSTI2026

Elastic-wave sensitivity-guided adaptive seismic survey design for cost-effective monitoring of geological carbon storage

Effective seismic monitoring is essential for verifying CO₂ containment, detecting potential leakage, and optimizing operational decisions in geologic carbon storage. Here, this study presents a time-adaptive, elastic-wave sensitivity-guided framework for designing cost-effective seismic monitoring layouts for tracking CO₂ plume migration. The method is based on elastic-wave sensitivity analysis, which quantifies how variations in subsurface properties impact seismic wavefields. Two complementary design strategies are developed: one based on selecting a fixed number of seismic sources (Method A), and the other based on selecting source–receiver pairs contributing to a fixed fraction of cumulative elastic-wave sensitivity energy (Method B). The optimization workflow to identify source–receiver configurations with the highest detection potential is demonstrated using a hypothetical GCS scenario at the Kimberlina site in California using simulations of elastic-wave sensitivity data at multiple post-injection timesteps. Results show that both strategies adapt to evolving plume geometries and wavefield sensitivities, with Method B offering broader spatial coverage and Method A ensuring simpler deployment. This framework enables site-specific, cost-effective, and risk-informed seismic survey designs, enhancing the ability to monitor CO₂ migration over time in evolving geological environments

58 GEOSCIENCES↗

NASA NTRS1994

Semiannual Status Report

During the last six months, we have continued our study of the excitation of electromagnetic waves in the whistler frequency range and the role that these waves will play in the acceleration of electrons and ions in the auroral region. A paper entitled 'Electron Beam Excitation of Upstream Waves in the Whistler Mode Frequency Range' was listed in the Journal of Geophysical Research. In this paper, we have shown that an anisotropic electron beam (or gyrating electron beam) is capable of generating both left-hand and right-hand polarized electromagnetic waves in the whistler frequency range. Since right-hand polarized electromagnetic waves can interact with background electrons and left-hand polarized waves can interact with background ions through cyclotron resonance, it is possible that these beam generated left-hand and right-hand polarized electromagnetic waves can accelerate either ions or electrons (or both), depending on the physical parameters under consideration. We are currently carrying out a comprehensive study of the electromagnetic whistler and lower hybrid like waves observed in the auroral zone using both wave and particle data. Our first task is to identify these wave modes and compare it with particle observations. Using both the DE-1 particle and wave measurements, we can positively identify those electromagnetics lower hybrid like waves as fast magnetosonic waves and the upper cutoff of these waves is the local lower hybrid frequency. From the upper cutoff of the frequency spectrum, one can infer the particle density and the result is in very good agreement with the particle data. Since these electromagnetic lower hybrid like waves can have frequencies extended down to the local ion cyclotron frequency, it practically confirms that they are not whistler waves.

Source record↗