SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Electronic packages, environmental control systems, and spacecraft thermal systems integration - thermal analysis data
Electronic equipment thermal environmental analysis - graphs
Pre-processor, post-processor, and multiple level substructuring routines for data management in support of NASTRAN finite element structural analysis of spacecraft
The detector and data reduction techniques used in connection with the cosmic ray experiments designed for and flown on Explorer 34 and 41 satellites are described. A history of the program development and the present status of data processing are briefly summarized. The instrument to measure the anisotropy and energy spectra of cosmic ray electrons and protons, and X-rays of solar and galactic origin is discussed. The main characteristics of the detectors and the stability during 23 months of operation are described. The method of analysis of the angular distribution of solar cosmic ray particles in the ecliptic plane is given. It is shown that the anisotropy of low energy particles of solar origin decreases sharply to a very small value when the satellite penetrates the magnetosphere.
Altitude profiles of the concentrations of the atmospheric components measured by the on board mass spectrometers during the descent of Viking lander are discussed by assuming that temperature has a smoother profile, and the eddy mixing coefficients are smaller at altitudes of 120 to 170 km than those formally determined. The influence of acoustic gravitational waves and errors in measurements and calculations are discussed in relation to the convolutions in the altitude profiles of the concentrations of the atmospheric components and the temperature of the atmosphere.
A data base of paired detailed wind profiles was developed for use in evaluating Shuttle Transportation System (STS) ascent capability. Since launch decision is based on a wind measured about 3.5 hr before launch, a data base of paired detailed profiles is needed. Method and technique on the reduction process and analysis is also presented. Guidelines used in selecting the pairs of profiles were established to insure a valid and representative data base. Sigma-U values for 3.5 hr at 12 km altitude show 8 percent increase from the transition case to the winter case and 18 percent decrease from the transition case to the summer case. Sigma-Values for 3.5 hr at 12 km altitude shows 12 percent increase from the transition case to the winter case and 17 percent decrease from the transition case to the summer case. A special feature of the 7- and 10.5-hr cases is that sigma-V increases by as much as 30 percent from the transition to the winter profiles. This large increase does not appear in the sigma-U data. Comparisons of the calculated values of 3.5 hr standard deviations of U and V with actual component deviations measured during space shuttle launch conditions confirm that the statistical values are representative.
Explore the source record for details and available documents.
The OFQ archives data base and handling system assembled as part of the Orbiter Flying Qualities (OFQ) research of the Orbiter Experiments Program (EOX) are described. The purpose of the OFQ archives is to preserve and document shuttle flight data relevant to vehicle dynamics, flight control, and flying qualities in a form that permits maximum use for qualified users. In their complete form, the OFQ archives contain descriptive text (general information about the flight, signal descriptions and units) as well as numerical time history data. Since the shuttle program is so complex, the official data base contains thousands of signals and very complex entries are required to obtain data. The OFQ archives are intended to provide flight phase oriented data subsets with relevant signals which are easily identified for flying qualities research.
Explore the source record for details and available documents.
A Rockwell built 0.030-scale 45-0 modified Space Shuttle Orbiter Configuration 14?A/B model and a Boeing built 0.030-scale 747 carrier model were tested to provide six component force and moment data for each vehicle in proximity to the other at a matrix of relative positions, attitudes and test conditions (angles of attack and sideslip were varied). Orbiter model support system tare effects were determined for corrections to obtain support-free aerodynamics. In addition to the balance force data, pressures were measured. Pressure orifices were located at the base of the Orbiter, on either side of the vertical blade strut, and at the mid-root chord on either side of the vertical tail. Strain gages were installed on the Boeing 747 vertical tail to indicate buffet onset. Photographs of aerodynamic configurations tested are shown.
Human and robotic planetary lander missions require accurate surface relative position knowledge to land near science targets or next to pre-deployed assets. In the absence of GPS, accurate position estimates can be obtained by automatically matching sensor data collected during descent to an on-board map. The Lander Vision System (LVS) that is being developed for Mars landing applications generates landmark matches in descent imagery and combines these with inertial data to estimate vehicle position, velocity and attitude. This paper describes recent LVS design work focused on making the map relative localization algorithms robust to challenging environmental conditions like bland terrain, appearance differences between the map and image and initial input state errors. Improved results are shown using data from a recent LVS field test campaign. This paper also fills a gap in analysis to date by assessing the performance of the LVS with data sets containing significant vertical motion including a complete data set from the Mars Science Laboratory mission, a Mars landing simulation, and field test data taken over multiple altitudes above the same scene. Accurate and robust performance is achieved for all data sets indicating that vertical motion does not play a significant role in position estimation performance.
The Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) mission successfully demonstrated the deployment and entry performance of a 6 m diameter Hypersonic Inflatable Decelerator on November 10, 2022. This was the largest blunt body flown to date and demonstrated this inflatable aeroshell technology at scale and conditions relevant to Earth and Mars Entry, Descent, and Landing applications. LOFTID built upon the prior successes of the suborbital IRVE and IRVE-3 missions, leveraging and expanding on the flight experience from these and other planetary and Earth sample return missions. Both the re-entry vehicle and ejectable data module were successfully recovered from the Pacific Ocean, with LOFTID satisfying requirements for decelerator performance and stable flight from orbital entry conditions through parachute deployment and splashdown. This work discusses the pre-flight aerodynamics database and reconstructed flight performance of the LOFTID re-entry vehicle.
The Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) mission successfully demonstrated the deployment and entry performance of a 6 m diameter Hypersonic Inflatable Decelerator on November 10, 2022. This was the largest blunt body flown to date and demonstrated this inflatable aeroshell technology at scale and conditions relevant to Earth and Mars Entry, Descent, and Landing applications. LOFTID built upon the prior successes of the suborbital IRVE and IRVE-3 missions, leveraging and expanding on the flight experience from these and other planetary and Earth sample return missions. Both the re-entry vehicle and ejectable data module were successfully recovered from the Pacific Ocean, with LOFTID satisfying requirements for decelerator performance and stable flight from orbital entry conditions through parachute deployment and splashdown. This work discusses the pre-flight aerodynamics database and reconstructed flight performance of the LOFTID re-entry vehicle.
This work examines the ability of the aerodynamic analysis methods contained in an industry standard conceptual design code, the Aerodynamic Preliminary Analysis System (APAS II), to estimate the forces and moments generated through control surface deflections from low subsonic to high hypersonic speeds. Predicted control forces and moments generated by various control effectors are compared with previously published wind-tunnel and flight-test data for three vehicles: the North American X-15, a hypersonic research airplane concept, and the Space Shuttle Orbiter. Qualitative summaries of the results are given for each force and moment coefficient and each control derivative in the various speed ranges. Results show that all predictions of longitudinal stability and control derivatives are acceptable for use at the conceptual design stage.
Spacecraft on-orbit servicing consists of exchanging components such as payloads, orbital replacement units (ORUs), and consumables. To accomplish the exchange of consumables, the receiving vehicle must mate to the supplier vehicle. Mating can be accomplished by a variety of docking procedures. However, these docking schemes are mission dependent and can vary from shuttle bay berthing to autonomous rendezvous and docking. Satisfying the many docking conditions will require use of an innovative docking device. The device must provide fluid, electrical, pneumatic and data transfer between vehicles. Also, the proper stiffness must be obtained and sustained between the vehicles. A device to accomplish this, the resupply interface mechanism (RIM), was developed. The RIM is a unique device because it grasps the mating vehicle, draws the two vehicles together, simultaneously mates all connectors, and rigidizes the mating devices. The NASA-Johnson Manipulator Development Facility was used to study how compatible the RIM is to on orbit docking and berthing. The facility contains a shuttle cargo bay mockup with a remote manipulator system (RMS). This RMS is used to prepare crew members for shuttle missions involving spacecraft berthing operations. The MDF proved to be an excellant system for testing the RIM/RMS compatibility. The elements examined during the RIM JSC test were: RIM gross and fine alignment; berthing method sequence; visual cuing aids; utility connections; and RIM overall performance. The results showed that the RIM is a good device for spacecraft berthing operations. Mating was accomplished during every test run and all test operators (crew members) felt that the RIM is an effective device. The purpose of the JSC RIM test and its results are discussed.
The Space Shuttle orbiter's thermal protection system (TPS), designed mainly on the basis of wind tunnel test data, has successfully completed its design, development, and flight test program. The flight test data provide an exceptional opportunity to evaluate the use of wind tunnel test data for the design of TPS for reentry vehicles. Comparisons of flight test data against wind tunnel data used to design the orbiter's TPS were developed. These flight data, though still in the preliminary analysis phases, generally support the use of wind tunnel test data in the design of TPS for hypersonic reentry vehicles.
The heat capacity mapping mission (HCMM), a low cost modular spacecraft built for the Applications Explorer Missions (AEM), was designed to allow scientists to determine the feasibility of using day/night thermal infrared remote sensor-derived data to: (1) discriminate various rock types and locate mineral resources; (2) measure and monitor surface soil moisture changes; (3) measure plant canopy temperatures at frequent intervals to determine transpiration of water and plant stress; and (4) measure urban heat islands. The design of the spacecraft (AEM-A), its payload, launch vehicle, orbit, and data collection and processing methods are described. Projects in which the HCMM data will be applied by 12 American and 12 foreign investigators are summarized.