Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “thick electrode”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Designing Anion-Exchange Ionomers with Oriented Nanoscale Phase Separation at a Silver Interface

We report performance of polymer electrolyte-based energy systems is significantly impacted by transport within the electrode catalyst layer, where ionomer thin films coat catalyst particles. Proton exchange ionomer thin films have been thoroughly characterized, but few studies have critically examined anion-exchange ionomer (AEI) thin films. Further, none have reported nanoscale phase separation for hydrocarbon AEIs, which is critical to mitigate transport resistances. In this work, a set of hydrocarbon-based AEIs with nanoscale phase separation are developed from tunable block copolymer systems composed of polyisoprene (PIp) and polychloromethylstyrene (PCMS). The effect of the PIp/PCMS ratio, architecture, and thickness on the thin-film morphology of the neutral block copolymer precursors on silicon and silver substrates is investigated using grazing-incidence small-angle X-ray scattering (GISAXS) and atomic force microscopy (AFM). AEIs are prepared by quaternizing with trimethylamine or methylpiperidine and their cation-dependent morphology is characterized at 60 °C and 95% RH. A perpendicularly aligned morphology is observed on silver, while no phase separation is observed on silicon, indicating that silver-polymer interfacial interactions drive phase separation. After quaternization, dipole-dipole interactions induce some disorder, but nanoscale phase separation is still maintained. GISAXS patterns are modeled using a Unified Fit approach to understand water uptake and swelling, and recommendations for AEI design are presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Measuring the buried interphase between solid electrolytes and lithium metal using neutrons

Interfaces are the key to next-generation high-energy batteries including solid-state Li metal batteries. In solid-state batteries, the buried nature of solid–solid electrolyte–electrode interfaces makes studying them difficult. Neutrons have significant potential to non-destructively probe these buried solid–solid interfaces. This work presents a comparative study using both neutron depth profiling (NDP) and neutron reflectometry (NR) to study a model lithium metal–lithium phosphorus oxynitride (LiPON) solid electrolyte system. In the NDP data, no distinct interphase is observed at the interface. NR shows a difference between electrodeposited, and vapor deposited LiPON–Li interfaces but finds both are gradient interphases that are less than 30 nm thick. Additional simulations of the LiPON–Li 2 O–Li system demonstrate that NDP has an excellent resolution in the 50 nm–1 μm regime while NR has an ideal resolution from 0.1–200 nm with different sample requirements. Together NDP and NR can provide a complementary understanding of interfaces between Li metal and solid electrolytes across relevant length scales.

Westover, Andrew S. [Oak Ridge National Laboratory↗
DOE OSTI2026

Roll-to-Roll Manufacturing of Solid Oxide Fuel Cells

The overall goal of this project is to develop a high-volume electrode electrolyte assembly (EEA) production capability to significantly increase throughput of solid oxide fuel cell (SOFC) manufacturing and reduce the cost while maintaining the same level of performance. Specifically, four approaches will be adopted: 1) optimization of the lamination process and correlation of the EEA properties and performance with the lamination conditions; 2) scale up of the lamination process and demonstration of >10 ft of EEA; 3) further increase of the EEA throughput via slot-die coating and demonstration of > 5 m/min in coating the thick anode layer; and 4) minimization of the anode thickness to reduce material cost.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2022

High-Platinum-Content Catalysts on Atomically Dispersed and Nitrogen Coordinated Single Manganese Site Carbons for Heavy-Duty Fuel Cells

Fuel cells for heavy-duty vehicles (HDVs) have attracted considerable attention because of their unique scalability, better fuel economy, the less demand for hydrogen refilling infrastructure. However, the potential application requires more stringent fuel cell durability up to 25,000 h. Membrane electrode assemblies (MEAs) made from platinum group metal (PGM) catalyst with relatively high loading 0.3 mgPt cm –2 play a crucial role in ensuring high-power and long-term durability. Integrating fine PGM nanoparticles and robust carbon support with strengthened interactions is critical for improving MEA performance and durability. Herein, a unique atomically dispersed and nitrogen coordinated single Mn site-rich carbon (M–N–C) support was developed for high content (40 wt%) platinum catalysts for the oxygen reduction reaction (ORR) cathode with reduced thickness. Compared with two controls studied in this work (e.g., a porous graphitic carbon-supported Pt and a commercial TKK Pt/C catalysts), the Pt (40 wt%)/Mn–N–C catalyst exhibited much enhanced catalytic activity and stability for the ORR in both aqueous acidic electrolyte and polymer electrolyte-based MEA. Here, we carefully elucidated the—role of the Mn–N–C support in promoting Pt catalyst concerning its high surface area, partially graphitic structure, and nitrogen dopants, providing better Pt nanoparticle dispersion, and strengthened interactions between Pt and carbon. Consequently, the MEA from the Pt (40 wt%)/Mn–N–C catalyst generated a 1.61 A cm –2 at 0.7 V based on HDV conditions (0.2 mgPt cm –2 and 250 kPa air). More importantly, the MEA is highly durable and can retain 1.31 A cm –2 at 0.7 V after 30,000 voltage cycles (~19% loss), surpassing the commercial Pt/C catalyst (loss of ~56%). Therefore, the Mn–N–C carbon-supported Pt catalyst holds a great promise to meet the challenging DOE target (1.07 A cm –2 at 0.7 V after 150,000 cycles) for HDVs.

25 ENERGY STORAGE↗
DOE OSTI2022

Evaluating the effect of ionomer chemical composition in silver-ionomer catalyst inks toward the oxygen evolution reaction by half-cell measurements and water electrolysis

The effect of anion exchange ionomer (AEI) chemistry on the kinetics of the oxygen evolution reaction (OER) was systematically studied in both half-cell and single-cell electrolysis experiments. OER was studied in 1 M K 2 CO 3 at 50°C using an array of ionomer-silver catalyst inks deposited on Ni foam. Different ionomer modifications were investigated to optimize the OER performance. The AEI used in this work features a block copolymer backbone of polychloromethylstyrene-b-polycyclooctene-b-polychloromethylstyrene which was functionalized with either benzyltrimethylammonium (TMA) or benzylmethylpiperidinium (MPRD) quaternary ammonium cations. Here, using an MPRD quaternary ammonium cation shifted the rate determining step at high overpotentials, ultimately providing enhanced performance. Increasing the catalyst ink dilution was also found to substantially improve mass activity and catalyst utilization (increase from 35 to 88 A g –1 Ag), likely by reducing the ionomer thickness and decreasing transport resistances. In the final ionomer modification, the Ni foam substrate was leveraged to partially hydrogenate the polycyclooctene midblock to be polyethylene-like at the Ni interface. A significant increase in the electrochemical surface area (Cdl increased from 8.8 to 20.8 mF cm –2 ) and performance (by 47 mA cm –2 or 29 A g –1 Ag) was observed with the incorporation of polyethylene. Kinetic results from half-cell experiments were validated via single-cell anion exchange membrane electrolysis experiments, where the optimized electrode displayed enhanced performance in both 1 M K 2 CO 3 and DI H 2 O.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Freestanding and Flexible Micrometer-Thick PEDOT:PSS Film with High Power Factor

High-efficiency thermoelectric materials are vital for sustainable energy. This work presents a reliable method to fabricate freestanding, flexible micrometer-thick films of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS), achieving a power factor of 204 μW m –1 K –2 , 4 orders of magnitude higher than pristine films. Furthermore, this improvement stems from polymer chain realignment and enhanced charge transport via solvent doping, coupled with PSS reduction during post-treatment, which also strengthens film mechanics. Crucially, the freestanding nature ensures transferability, making them ideal for versatile applications. Besides thermoelectrics, these highly conductive, robust, and flexible PEDOT:PSS films provide attractive solutions for organic solar cells, battery electrodes, and flexible electronics.

Conjugated Polymers↗
DOE OSTI2022

A Perspective on ferroelectricity in hafnium oxide: Mechanisms and considerations regarding its stability and performance

Ferroelectric hafnium oxides are poised to impact a wide range of microelectronic applications owing to their superior thickness scaling of ferroelectric stability and compatibility with mainstream semiconductors and fabrication processes. For broad-scale impact, long-term performance and reliability of devices using hafnia will require knowledge of the phases present and how they vary with time and use. In this Perspective article, the importance of phases present on device performance is discussed, including the extent to which specific classes of devices can tolerate phase impurities. Following, the factors and mechanisms that are known to influence phase stability, including substituents, crystallite size, oxygen point defects, electrode chemistry, biaxial stress, and electrode capping layers, are highlighted. Herein, discussions will focus on the importance of considering both neutral and charged oxygen vacancies as stabilizing agents, the limited biaxial strain imparted to a hafnia layer by adjacent electrodes, and the strong correlation of biaxial stress with resulting polarization response. Areas needing additional research, such as the necessity for a more quantitative means to distinguish the metastable tetragonal and orthorhombic phases, quantification of oxygen vacancies, and calculation of band structures, including defect energy levels for pure hafnia and stabilized with substituents, are emphasized.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Roll-To-Roll Atomic Layer Deposition of Titania Nanocoating on Thermally Stabilizing Lithium Nickel Cobalt Manganese Oxide Cathodes for Lithium Ion Batteries

Conformal coating of ceramic layers (nm-thick) on Ni-rich layered cathode materials is an effective strategy for improving high-temperature longevity of Li-ion batteries (LIBs). In this work, we develop a roll-to-roll atomic layer deposition (R2R ALD) apparatus for growing uniform nanolayers of TiO 2 . We explore the effect of ALD parameters (temperature: 120–180 °C and line speed: 2–40 mm s –1 ) on the TiO 2 surface coating and subsequently investigate the electrochemical performance of the as-prepared cathodes. The capacity retention of TiO 2 -coated porous electrodes is substantially improved compared to that of the pristine cathode material for high-temperature cycling. Electrochemical impedance spectroscopy confirms that the ALD-TiO 2 coating suppresses the undesired side reactions initiated at the electrode/electrolyte interface, reduces charge transfer resistance, and ultimately facilitates the Li + transport through the composite cathode nanostructure. The robust design of the ALD-TiO 2 cathode material enables high-temperature operation (>55 °C) with enhanced specific capacity, superior rate capability, excellent cyclability, and ultra-high coulombic efficiency within a wide potential window (3.0–4.35 V). Furthermore, the R2R ALD technique developed in this work paves the way for large-scale fabrication of ceramic-coated cathode sheets with a production rate reaching 2.4 m min –1 for a continuous coating operation.

25 ENERGY STORAGE↗
DOE OSTI2020

Electroanalytical Measurement of Interphase Formation at a Li Metal–Solid Electrolyte Interface

The interphase between Li metal and solid electrolytes dictates performance in Li metal batteries. For the solid electrolyte Lipon, in this study we electroanalytically measure a capacity loss of 1.03 ± 0.16 μAh/cm 2 when Lipon first contacts Li metal. Assuming this capacity is all lost to interphase formation, this corresponds to a maximum Li consumption of 5.0 ± 0.8 nm to form an interphase ~4.7 nm thick. From dynamic electrochemical impedance spectroscopy (dEIS) during Li plating, we determine that nonlinear chaotic spectra demark this interphase formation and that this occurs immediately upon initiation of Li plating. dEIS also reveals interfacial resistance during both plating and stripping that decreases as the amount of plated Li increases.

25 ENERGY STORAGE↗
DOE OSTI2022

Highly Reversible Sodium Metal Battery Anodes via Alloying Heterointerfaces

As a promising pathway toward low-cost, long-duration energy storage, rechargeable sodium batteries are of increasing interest. Batteries that incorporate metallic sodium as anode promise a high theoretical specific capacity of 1166 mAh g –1 , and low reduction potential of –2.71 V. The high reactivity and poor electrochemical reversibility of sodium anodes render sodium metal anode (SMA) cells among the most challenging for practical implementation. Here, the failure mechanisms of Na anodes are investigated and the authors report that loss of morphological control is not the fundamental cause of failure. Rather, it is the inherently poor anchoring/root structure of electrodeposited Na to the electrode substrate that leads to poor reversibility and cell failure. Poorly anchored Na deposits are prone to break away from the current collector, producing orphaning and poor anode utilization. Thin metallic coatings in a range of chemistries are proposed and evaluated as SMA substrates. Based on thermodynamic and ion transport considerations, such substrates undergo reversible alloying reactions with Na and are hypothesized to promote good root growth—regardless of the morphology. Among the various options, Au stands out for its ability to support long Na anode lifetime and high reversibility (Coulombic Efficiency > 98%), for coating thicknesses in the range of 10–1000 nm. Finally, as a first step toward evaluating practical utility of the anodes, their performance in Na||SPAN cells with N:P ratio close to 1:1 is evaluated.

25 ENERGY STORAGE↗
DOE OSTI2020

Hybrid semiconductor-piezoacoustic radiofrequency device

An amplifying radiofrequency device includes a piezoelectric film and a semiconductor amplifier layer. The piezoelectric film is conformed as an acoustic waveguide. The piezoelectric film has a principal acoustic propagation direction parallel to the principal conduction direction of the amplifier layer. Interdigitated transducers are positioned on the piezoelectric film to respectively launch an acoustic wave in response to an input RF signal, and transduce the acoustic wave back to an output RF signal. There is a distance of less than the acoustic wavelength between the semiconductor amplifier layer and the piezoelectric film. The piezoelectric film has a thickness of less than the acoustic wavelength. According to a method for making such a device, a stack of III-V layers is epitaxially grown on a III-V substrate, wherein the stack comprises a first etch stop layer, a second etch stop layer, an amplifier layer, and a contact layer. The stack is bonded to a lithium niobate film. The III-V substrate is removed by etching down to the first etch stop layer. Deposition windows are opened by etching from the first etch stop layer down to the contact layer. Metal contact electrodes are deposited in the deposition windows.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Toward Quality Control in Perovskite Solar Cell Fabrication: Spot-Like Processing Defects Disrupt Charge Transport Layers and Promote Ag Metal Electrode Intrusion

Metal halide perovskite (MHP) photovoltaics provide high efficiencies with less stringent processing requirements than traditional photovoltaic materials. However, processing related defects must be suppressed as they can lead to decreases in initial device efficiency and potentially compromise long-term device operation. In this work we investigate morphological defects in MHP devices using luminescence imaging followed by in-depth structural and composition analysis using electron microscopy-based methods. We identify several different classes of spot-like processing-related defects and observe that a single device structure may contain multiple types of these defects. The presence of these defects in devices with different layer structures and absorber chemistries makes them relevant to the perovskite photovoltaic community as a whole. The defects are associated with voids in the perovskite layer, inclusions (glass, migrated Ag, dust), thickness variations, hole transport layer disruption with anomalous crystal growth, and electron transport layer disruptions that could allow Ag intrusion and lead to local shunts. As perovskite photovoltaic technology matures, mitigation of such defects is critical to improving not only initial performance but also the long-term stability required for industrial applications.

14 SOLAR ENERGY↗
DOE OSTI2025

Microstructure Scale Lithium-Ion Battery Modeling: Part II. On In-Plane Heterogeneities and the Mechanisms that Regulate Them

Li-ion batteries performance and degradation are typically modeled at the macroscopic scale, that is neglecting in-plane heterogeneities that can arise from non-uniform electrode microstructures. Herein, a microstructure scale electrochemical model is used to quantify the impact of microstructure heterogeneity on cell performance during fast charging. The model predicts the electrolyte and solid concentration in-plane standard deviation can reach, respectively, ≈200 mol·m −3 and 6–7 kmol·m −3 locally. Further, the intercalation current density in-plane relative standard deviation can reach extremely high values, around 100% in the cathode and well above 100% in the anode graphite. These denote highly non-uniform lithiation rates and material utilization within each slice of the microstructure along the cell thickness. Non-uniform curvatures, at the particle scale (surface roughness) and between particles (size distribution), were found to initiate these in-plane heterogeneities, while an OCP-induced mechanism subsequently regulates them. The present model provides new insights into small length scale heterogeneity impact on battery performance not available with standard macro-scale/P2D modeling.

25 ENERGY STORAGE↗
DOE OSTI2024

3D Printed Nanoporous Separators Based on Polymerization-Induced Phase Separation for Fast-Charging, High Cycling Stability Li-Ion Batteries

Fast charging and stable lithium-ion batteries (LIBs) require prompt Li ion transport between electrodes. 3D porous separators can potentially improve ion transport at both the microscale and macroscale levels. Additive manufacturing (AM) is an ideal tool to produce and study 3D porous separators of LIBs, although little work has been reported in this area. Here, we demonstrate porous structural control in layer-by-layer printed hexanediol diacrylate (HDDA) separators using a projection micro stereolithography (PμSL) AM technology and present their corresponding battery performance in lithium nickel manganese cobalt oxide (NMC)/graphite full cells. The composition of photocurable resin determines the porous morphology (e.g., bicontinuous and droplet-like), while the settings of printing layer thickness and number of exposures can be used to adjust the porosity (e.g., from 27% to 63%). Optimal resin and print conditions are determined, and the resulting separator exhibits superior Li ion conductivity and therefore higher rate performance and longer cycling life. Compared with a Celgard 2325 separator, the optimized porous HDDA separator increases the 10C-rate capacity by 34% and decreases the capacity degradation rate at the 1C-rate by 4.9%. In conclusion, this work paves the way for future AM of 3D separators for high-energy, high-power, and long-cycling-life LIBs.

25 ENERGY STORAGE↗
DOE OSTI2026

Influence of CO 2 -Regenerative Film Properties in Enhancing C 2+ Products Selectivity While Mitigating CO 2 Crossover

Zero-gap anion-exchange membrane electrode assembly (AEMEA) electrolyzers operating in alkaline media face challenges such as CO 2 crossover and salting-out. The bipolar membrane electrode assembly (BPMEA) electrolyzer, using DI water as the electrolyte, addresses both CO 2 crossover and salting-out issues. As cations, which are crucial in stabilizing the CO 2 R intermediates, are absent in the electrolyte, cations embedded in the AEM play an important role in dictating the CO 2 R selectivity and activity in BPMEA systems. So far, no systematic study has been conducted on the influence of cations embedded in AEMs on CO 2 selectivity and activity in BPMEA systems. Moreover, BPMEA systems impose an additional challenge: low stability due to delamination of the bipolar membrane caused by CO 2 regeneration at the membrane-membrane interface. To enhance the stability of the electrolyzer, a simple yet highly reproducible strategy for coating a porous CO 2 regenerative film on smooth Nafion 117 is demonstrated in this work, along with a systematic study of four different commercially available AEMs, composed of different cations and cation densities, for use in combination with Nafion 117 and copper catalyst at the cathode. We found that the PiperION membrane delivers selectivity and activity comparable to those of alkali-metal cations, owing to the enhanced local electric field resulting from the combined effects of a high positive charge on the N atom of the piperidinium cation and the high ion-exchange capacity. Further, we studied the influence of the thickness of the PiperION porous layer over Nafion 117 on CO 2 R selectivity and found that 70 μm is the minimum thickness to achieve maximum C 2+ products selectivity, reduced the CO 2 crossover to 5% from 25% at 4 SCCM and 150 mA cm –2 , and was stable for operation beyond 100 h. The selectivity of this system, compared with AEMEA, and stability outperformed both AEMEA and BPMEA. This study helps design more effective BPMs to inhibit CO 2 crossover while enabling stable and selective electrochemical CO 2 reduction to C 2+ hydrocarbons.

Cations↗
DOE OSTI2025

A Full-Cell Model for Direct Toluene Electro-Hydrogenation Electrolysis

Liquid organic hydrogen carriers (LOHCs) are organic molecules that undergo a hydrogenation/dehydrogenation cycle to enable storage and transportation of hydrogen fuel under ambient conditions. One promising LOHC candidate is toluene, which can be converted to methylcyclohexane (MCH) electrochemically, enabling a decarbonized process when green electricity is used. In this study, we developed a full-cell model for the direct electro-hydrogenation of toluene to MCH, utilizing a zero-gap membrane electrode assembly architecture. The model incorporates electrochemical kinetics, ionic transport, water transport across the membrane, and mass transport effects. Electrochemical kinetics are characterized using Tafel analysis on Pt/Ru catalyst. The model is validated against experimental data, including polarization curves, Faradaic efficiencies, and water crossover. A voltage breakdown analysis shows that the performance is dominated by kinetic losses, and the model is used to carry out a comparison of different toluene electro-hydrogenation reaction catalysts. Finally, a sensitivity analysis is conducted on key design parameters illustrating which can be modified to maximize electrolyzer performance. The cathode specific surface area and cathode porous transport layer thickness (PTL) have the largest impact on the current density, while the PTL thickness and Pt loading in the PTL have the largest impact on Faradaic efficiency.

Ehlinger, Victoria M. [Lawrence Livermore National↗
DOE OSTI2023

Survey of AC-LGADs for future 4D trackers with a proton beam

We will present the first beam test results with centimeter-scale AC-LGAD strip sensors, using the Fermilab Test Beam Facility, and a study of the performance of AC-LGAD sensors as a function of their thickness. Sensors of this type are envisioned for applications that require large-area precision 4D tracking coverage with economical channel counts, including timing layers for the Electron Ion Collider (EIC), and space-based particle experiments. Long strip sensors with sparse readout offer better cost and performance for applications where channel count or electrical power density is a constraint. Thanks to the excellent signal to noise ratio in AC-LGADs, sparse readout can be exploited without significant degradation of spatial or time resolution, which is demonstrated in our studies. A survey of sensor designs is presented, with the aim of optimizing the electrode geometry for spatial resolution and timing performance. We will present our studies of the sensor geometry optimizatio n to maintain the desirable sensor performance characteristics with increasingly larger electrodes.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

First survey of centimeter-scale AC-LGAD strip sensors with a 120 GeV proton beam

We will present the first beam test results with centimeter-scale AC-LGAD strip sensors, using the Fermilab Test Beam Facility, and a study of the performance of AC-LGAD sensors as a function of their thickness. Sensors of this type are envisioned for applications that require large-area precision 4D tracking coverage with economical channel counts, including timing layers for the Electron Ion Collider (EIC), and space-based particle experiments. Long strip sensors with sparse readout offer better cost and performance for applications where channel count or electrical power density is a constraint. Thanks to the excellent signal to noise ratio in AC-LGADs, sparse readout can be exploited without significant degradation of spatial or time resolution, which is demonstrated in our studies. A survey of sensor designs is presented, with the aim of optimizing the electrode geometry for spatial resolution and timing performance. We will present our studies of the sensor geometry optimization to maintain the desirable sensor performance characteristics with increasingly larger electrodes.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗