Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “thermally conductive”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Dissociating the phononic, magnetic and electronic contributions to thermal conductivity: a computational study in alpha-iron

Computational tools to study thermodynamic properties of magnetic materials have, until recently, been limited to phenomenological modeling or to small domain sizes limiting our mechanistic understanding of thermal transport in ferromagnets. Herein, we study the interplay of phonon and magnetic spin contributions to the thermal conductivity in a-iron utilizing non-equilibrium molecular dynamics simulations. It was observed that the magnetic spin contribution to the total thermal conductivity exceeds lattice transport for temperatures up to two-thirds of the Curie temperature after which only strongly coupled magnon-phonon modes become active heat carriers. Characterizations of the phonon and magnon spectra give a detailed insight into the coupling between these heat carriers, and the temperature sensitivity of these coupled systems. Comparisons to both experiments and ab initio data support our inferred electronic thermal conductivity, supporting the coupled molecular dynamics/spin dynamics framework as a viable method to extend the predictive capability for magnetic material properties.

36 MATERIALS SCIENCE↗
NASA NTRS1995

A modified thermal conductivity for low density plasma magnetic flux tubes

In response to inconsistencies which have arisen in results from a hydrodynamic model in simulation of high ion temperature (1-2 eV) observed in low density, outer plasmasphere flux tubes, we postulate a reduced thermal conductivity coefficient in which only particles in the loss cone of the quasi-collisionless plasma contribute to the thermal conduction. Other particles are assumed to magnetically mirror before they reach the topside ionosphere and therefore not to remove thermal energy from the plasmasphere. This concept is used to formulate a mathematically simple, but physically limiting model for a modified thermal conductivity coefficient. When this modified coefficient is employed in the hydrodynamic model in a case study, the inconsistencies between simulation results and observations are largely resolved. The high simulated ion temperatures are achieved with significantly lower ion temperatures in the topside ionosphere. We suggest that this mechanism may be operative under the limited low density, refilling conditions in which high ion temperatures are observed.

Comfort, R. H.↗
DOE OSTI2020

Thermal boundary conductance between high thermal conductivity boron arsenide and silicon

Thermal boundary conductance (TBC) is important for heat dissipation in light-emitting diodes (LEDs). In this study, we predicted the TBC between the high thermal conductivity boron arsenide (BAs) and silicon (Si) by nonequilibrium molecular dynamics (MD) simulations. From the thermal conductivity accumulation function with respect to phonon frequency, the dominant phonon frequencies for heat conduction in BAs are extremely different from those in Si. However, our nonequilibrium MD simulations indicated that the TBC of the BAs/Si interface was still high compared to most other interfaces, even though there was a major frequency mismatch in the thermal conductivity accumulation function between BAs and Si. The primary reason for the high TBC is the overlap of phonon density of states between BAs and Si in the frequency range of 5–8 THz. The range of predicted TBC of the BAs/Si interface was between 200 and 300 MW/m2 K in the temperature range of 300–700 K, and the values of the TBC were not sensitive to the temperature. We also found that the TBCs in Si/BAs and Si/Ge interfaces were close to each other considering the simulation uncertainty. This work indicates BAs as an excellent material for heat dissipation across the interfaces.

Wei, Zhiyong (ORCID:000000018686451X)↗
DOE OSTI2020

Thermal conductivity of (Ge 2 Sb 2 Te 5 ) 1–x Cx phase change films

Germanium–antimony–telluride has emerged as a nonvolatile phase change memory material due to the large resistivity contrast between amorphous and crystalline states, rapid crystallization, and cyclic endurance. Improving thermal phase stability, however, has necessitated further alloying with optional addition of a quaternary species (e.g., C). In this work, the thermal transport implications of this additional species are investigated using frequency-domain thermoreflectance in combination with structural characterization derived from x-ray diffraction and Raman spectroscopy. Specifically, the room temperature thermal conductivity and heat capacity of (Ge 2 Sb 2 Te 5 ) 1–x C x are reported as a function of carbon concentration (x ≤ 0:12) and anneal temperature (T ≤ 350 °C) with results assessed in reference to the measured phase, structure, and electronic resistivity. Phase stability imparted by the carbon comes with comparatively low thermal penalty as materials exhibiting similar levels of crystallinity have comparable thermal conductivity despite the addition of carbon. The additional thermal stability provided by the carbon does, however, necessitate higher anneal temperatures to achieve similar levels of structural order.

42 ENGINEERING↗
NASA NTRS1980

The heating of a thermally conducting stratified medium. I - Self-gravitating gas threaded by magnetic fields

Two theoretical problems are presented to illustrate the equilibrium structure of a gravitating gas threaded by magnetic fields. The gas is heated everywhere at a rate proportional to the local density and cooled by thermal conduction channeled along the magnetic field. Emphasis is placed on the influence of anisotropic thermal conduction on the distribution of the gas. In the first problem, the magnetic field has straight field lines that are nearly parallel. The simple field line geometry allows us to calculate, in closed form, the equilibria configurations of a gas slab which is cooled nonuniformly by thermal conduction along field lines which leave the gas slab at varying angles. The problem involves the gas having a free boundary, which is one of the unknowns to be determined. A discussion is given of the set of all possible equilibria so constructed. In the second problem there is no electric current flowing in the gas but there is a potential magnetic field having curved field lines. Exact solutions of equilibriums are presented to illustrate the heating of stellar and galactic coronas.

Lerche, I.↗
DOE OSTI2021

Structural, Thermal, and Mechanical Characterization of a Thermally Conductive Polymer Composite for Heat Exchanger Applications

Polymer composites are being considered for numerous thermal applications because of their inherent benefits, such as light weight, corrosion resistance, and reduced cost. In this work, the microstructural, thermal, and mechanical properties of a 3D printed polymer composite with high thermal conductivity are examined using multiple characterization techniques. Infrared spectroscopy and X-ray diffraction reveal that the composite contains a polyphenylene sulfide matrix with graphitic fillers, which is responsible for the high thermal conductivity. Furthermore, differential scanning calorimetry determines that the glass transition and melting point of the composite are 87.6 °C and 285.6 °C, respectively. Thermogravimetric analysis reveals that the composite is thermally stable up to ~400 °C. Creep tests are performed at different isotherms to evaluate the long-term performance of the composite. The creep result indicates that the composite can maintain mechanical integrity when used below its glass transition temperature. Nanoindentation tests reveal that modulus and hardness of the composite is not significantly influenced by heating or creep conditions. These findings indicate that the composite is potentially suitable for heat exchanger applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Thermal conductivity of a laser plasma

Here, we present a model of the electron thermal conductivity of a laser-produced plasma. The model, supported by Vlasov–Fokker–Planck simulations, predicts that laser absorption reduces conductivity by forcing electrons out of a Maxwell–Boltzmann equilibrium, which results in depletion of both low-velocity bulk electrons and high-velocity tail electrons. We show that both the bulk and tail electrons approximately follow super-Gaussian distributions, but with distinct exponents that each depend on the laser intensity and wavelength through the parameter a = Zv$^{2}_{E}$/v$^{2}_{T}$. For a value of a = 0.5, tail depletion reduces the thermal conductivity to half its zero-intensity value. We present our results as simple analytic fits that can be readily implemented in any radiation-hydrodynamics code or used to correct the local limit of non-local conduction models.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Thermal diffusivity and thermal conductivity of SiC composite tubes: the effects of microstructure and irradiation

Cladding thermal conductivity is an important physical property in assessing the performance of silicon carbide (SiC)-cladded fuels for nuclear reactors. However, there is a significant lack of reliable data, particularly for irradiated materials, because the geometry complicates the measurement. This study investigates the thermal diffusivity of coupons with a curvature, machined from SiC fiber–reinforced SiC matrix composite tubes, with and without neutron irradiation under light water reactor–relevant temperature and dose conditions. The tested materials included full composite and duplex SiC composite tubes. The measurements were conducted using a modern flash diffusivity apparatus. The analyzed area on the specimen during diffusivity testing was reduced for improved measurement accuracy due to sample curvature. Post-irradiation measurements showed that the effects of neutron irradiation on thermal conductivity (e.g. thermal defect resistivity) are different between SiC composite plates versus tubes. The difference was explained by higher matrix density of the tube than the plate. This study provides reliable thermal properties of prototypic SiC composite tubes useful for fuel performance modeling of SiC-based cladding.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS2010

Multiscale Modeling of Thermal Conductivity of Polymer/Carbon Nanocomposites

Molecular dynamics simulation was used to estimate the interfacial thermal (Kapitza) resistance between nanoparticles and amorphous and crystalline polymer matrices. Bulk thermal conductivities of the nanocomposites were then estimated using an established effective medium approach. To study functionalization, oligomeric ethylene-vinyl alcohol copolymers were chemically bonded to a single wall carbon nanotube. The results, in a poly(ethylene-vinyl acetate) matrix, are similar to those obtained previously for grafted linear hydrocarbon chains. To study the effect of noncovalent functionalization, two types of polyethylene matrices. -- aligned (extended-chain crystalline) vs. amorphous (random coils) were modeled. Both matrices produced the same interfacial thermal resistance values. Finally, functionalization of edges and faces of plate-like graphite nanoparticles was found to be only modestly effective in reducing the interfacial thermal resistance and improving the composite thermal conductivity

Clancy, Thomas C.↗
NASA NTRS1972

Thermal conductivity in vibrationally excited gases.

Comparisons between experimental and theoretical values of the thermal conductivity for a series of nonpolar polyatomic gases show large discrepancies at higher temperatures where the vibrational contribution becomes increasingly important. Examination of various theoretical approaches indicates that the discrepancies can be attributed to approximating the coefficient characterizing the diffusion of vibrational energy, D sub vib, by the self-diffusion coefficient. The present theories cannot accurately predict D sub vib, and its measurement is extremely difficult. Consequently, the approach adopted by the author is to obtain D sub vib by using experimental values of the thermal conductivity. An attempt is made to correlate these values of D sub vib with vibrational relaxation time, so that values of D sub vib can be obtained for all nonpolar polyatomic gases.

Ahtye, W. F.↗
NASA NTRS2004

Thermal Conductivity of Carbon Nanotube Composite Films

State-of-the-art ICs for microprocessors routinely dissipate power densities on the order of 50 W/sq cm. This large power is due to the localized heating of ICs operating at high frequencies, and must be managed for future high-frequency microelectronic applications. Our approach involves finding new and efficient thermally conductive materials. Exploiting carbon nanotube (CNT) films and composites for their superior axial thermal conductance properties has the potential for such an application requiring efficient heat transfer. In this work, we present thermal contact resistance measurement results for CNT and CNT-Cu composite films. It is shown that Cu-filled CNT arrays enhance thermal conductance when compared to as-grown CNT arrays. Furthermore, the CNT-Cu composite material provides a mechanically robust alternative to current IC packaging technology.

Ngo, Quoc↗
NASA NTRS1993

Characterization of the thermal conductivity for Advanced Toughened Uni-piece Fibrous Insulations

Advanced Toughened Uni-piece Fibrous Insulations (TUFI) is discussed in terms of their thermal response to an arc-jet air stream. A modification of the existing Ames thermal conductivity program to predict the thermal response of these functionally gradient materials is described in the paper. The modified program was used to evaluate the effect of density, surface porosity, and density gradient through the TUFI materials on the thermal response of these insulations. Predictions using a finite-difference code and calculated thermal conductivity values from the modified program were compared with in-depth temperature measurements taken from TUFI insulations during short exposures to arc-jet hypersonic air streams.

Stewart, David A.↗
NASA NTRS1980

The heating of a thermally conducting stratified medium. II - A simple plane model of an atmosphere

Exact solutions of the following theoretical problem are presented: A plane atmosphere is in hydrostatic equilibrium with a uniform gravity. The ideal gas law is assumed. Heat is generated everywhere at a rate proportional to the local density. The atmosphere is maintained in a steady state through cooling by thermal conduction and radiation. This problem is reducible to quadratures for a thermal conductivity which is an arbitrary, but prescribed, function of the temperature, and for a radiative loss which is expressible as the product of the density and an arbitrary, but prescribed, function of the pressure. The analysis is carried out for the case of power law thermal conductivity, and a radiative loss proportional to the square of the density and to the first power of the temperature. The radiative cooling function adopted here has the basic mathematical form for an optically thin medium. The solutions reproduce the macroscopic ordering of a hot 'corona' separated from a 'photosphere' by a layer of temperature minimum. The analytic solutions allow direct illustration of the interplay between steady energy transport and the requirements of hydrostatic equilibrium.

Lerche, I.↗
DOE OSTI2021

Thermal conductivity of the n = –5 and 10 members of the (SrTiO 3 ) n SrO Ruddlesden–Popper superlattices

Unlike many superlattice structures, Ruddlesden–Popper phases have atomically abrupt interfaces useful for interrogating how periodic atomic layers affect thermal properties. Here, we measure the thermal conductivity in thin films of the n = 1–5 and 10 members of the (SrTiO 3 ) n SrO Ruddlesden–Popper superlattices grown by molecular-beam epitaxy and compare the results to a single crystal of the n = 1 Ruddlesden–Popper SrLaAlO 4 . The thermal conductivity cross-plane to the superlattice layering (k 33 ) is measured using time-domain thermoreflectance as a function of temperature and the results are compared to first-principles calculations. The thermal conductivity of this homologous series decreases with increasing interface density. Characterization by x-ray diffraction and scanning transmission electron microscopy confirms that these samples have a Ruddlesden–Popper superlattice structure.

36 MATERIALS SCIENCE↗
NASA NTRS2017

Thermally-Conductive Metallic Coatings and Applications for Heat Removal on In-Space Cryogenic Vehicles

For large in-space cryogenic upper stages, substantial axial heat removal from a forward skirt by vapor-based heat interception may not be achieved by simple attachment methods unless sufficient thermal conductance from the skirt to the cooling fluid can be achieved. Preferable methods would allow for the addition of the cooling system to existing structure with minimal impact on the structure. Otherwise, significant modification to the basic structural design andor novel and complex attachment mechanisms with high effective thermal conductance are likely to be required. The approach being pursued by evolvable Cryogenics (eCryo) is to increase the thermal performance of a relatively simple attachment system by applying metallic or other thermally conductive material coatings to the mating surface area of the fluid channel where it is attached the skirt wall. The expectation of candidate materials is that the dramatic increase in conductivity of pure metals at temperatures close to liquid hydrogen vapor temperature will compensate for the reduced actual contact area typical of mechanical joints. Basic contact conductance data at low temperatures for candidate interface materials is required to enable the test approach. A test rig was designed at NASA Glenn Research Center to provide thermal contact resistance testing between small sample coupons coated with conductive material via electron beam evaporation, a low-temperature option that will not affect physical properties of base materials. Average coating thicknesses were 10 k. The test fixture was designed to mount directly to a cryocooler cold head within a vacuum test chamber. The purpose of this test was to determine qualitative contact conductance between various test samples. Results from this effort will be implemented in a sub-scale vapor-based heat interception test, where the applicability for increased heat removal on large structural skirts will be considered.

small scale testing↗
NASA NTRS1992

Thermal conductance of augmented pressed metallic contacts at liquid helium temperatures

The thermal conductance of uncoated oxygen-free high conductivity (OFHC) copper, 6061-T6 aluminum, free-machining brass, and 304 stainless steel sample pairs which were augmented with a gold coated 6061-T6 aluminum washer inserted between the contact surfaces was measured over the temperature range of 1.6 to 6.0 K, with applied forces from 22 to 670 N. The contact surfaces of the sample pairs were prepared with a 0.8 micron lapped finish, while the finish of the aluminum washer was 0.2 micron lapped. The contribution to the overall thermal impedance by the bulk conductance of the aluminum washer was negligible. It was found that addition of the washer offered no significant conductance improvement over an uncoated single contact pair; any benefits from using the gold plated washer were counteracted by the addition of two more contact surfaces. Additionally, the thermal conductance of a 'combination' aluminum sample pair having one gold coated and one uncoated surface was measured and compared to the washer pair. The ratio of the conductance of the washer pair to half the conductance of the 'combination' pair was found to be constant and near unity over the temperature range of the data obtained, within experimental error.

Salerno, L. J.↗
DOE OSTI2026

Computational Discovery of Ultralow Thermal Conductivity in the Energy-Degenerate Polymorphic Crystal Family A 2 M 2 M’Q 4

Crystalline materials, characterized by their well-defined lattices, typically exhibit a unique global thermodynamic minimum for a specific composition. However, in this study, we discover a quaternary chalcogenide family, A 2 M 2 M’Q 4 (A: alkali metals; M: coinage metal; M’: transition or group-IVA metals; Q: chalcogens), that exhibits pervasive energy (near-)degeneracy. For a given composition, multiple structurally distinct polymorphs exist within a formation enthalpy window of only a few milli-electron volts per atom. We quantify this inherent structural flexibility using a dedicated descriptor, σ f : the standard deviation of formation enthalpies among degenerate (meta)stable polymorphs. The consistently low σf observed across the A 2 M 2 M’Q 4 family signifies a characteristically shallow and frustrated potential energy landscape, which drives pronounced lattice anharmonicity, marking these materials as prime candidates for ultralow lattice thermal conductivity (κ L ). Employing an advanced high-throughput computational framework that integrates thermodynamics, lattice dynamics, and thermal conductivity calculations, we screen 1215 A 2 M 2 M’Q 4 compounds, identifying 30 stable candidates with κ L < 0.5 W m –1 K –1 at 300 K. Among them, Rb 2 Ag 2 SnTe 4 and Rb 2 Au 2 HfTe 4 , two representatives from the IVA and TM subgroups, are predicted to show ultralow room-temperature κ L of 0.174 W m –1 K –1 and 0.295 W m –1 K –1 , respectively. A systematic analysis suggests that the nonbonding and antibonding states induced by “dual rattlers” are the origin of low thermal conductivity in these compounds. Our results position the A 2 M 2 M’Q 4 family as a rich source of intrinsic thermal insulators and suggest that polymorphic energy degeneracy may serve as a valuable signpost for identifying crystalline families with potential anharmonicity.

cations↗
DOE OSTI2021

Assessment of empirical interatomic potential to predict thermal conductivity in ThO 2 and UO 2

Computing vibrational properties of crystals in the presence of complex defects often necessitates the use of (semi-)empirical potentials, which are typically not well characterized for perfect crystals. In this study we explore the efficacy of a commonly used embedded-atomempirical interatomic potential for the U x Th 1- x O 2 system, to compute phonon dispersion, lifetime, and branch specific thermal conductivity. Our approach for ThO 2 involves using lattice dynamics and the linearized Boltzmann transport equation to calculate phonon transport properties based on second and third order force constants derived from the empirical potential and from first-principles calculations. For UO 2 , to circumvent the accuracy issues associated with first-principles treatments of strong electronic correlations, we compare results derived from the empirical interatomic potential to previous experimental results. It is found that the empirical potential can reasonably capture the dispersion of acoustic branches, but exhibits significant discrepancies for the optical branches, leading to overestimation of phonon lifetime and thermal conductivity. The branch specific conductivity also differs significantly with either first-principles based results (ThO 2 ) or experimental measurements (UO 2 ). These findings suggest that the empirical potential needs to be further optimized for robust prediction of thermal conductivity both in perfect crystals and in the presence of complex defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗