SEARCH · Engineering Papers
Results for “state”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Influence of Copper Oxidation State on the Bonding and Electronic Structure of Cobalt-Copper Complexes
Heterobimetallic complexes that pair cobalt and copper were synthesized and characterized by a suite of physical methods, including X-ray diffraction, X-ray anomalous scattering, cyclic voltammetry, magnetometry, electronic absorption spectroscopy, electron paramagnetic resonance, and quantum chemical methods. Both Cu(II) and Cu(I) reagents were independently added to a Co(II) metalloligand to provide (py 3 tren)CoCuCl (1-Cl) and (py 3 tren)CoCu(CH 3 CN) (2-CH 3 CN), respectively, where py3tren is the triply deprotonated form of N,N,N-tris(2-(2-pyridylamino)ethyl)amine. Complex 2-CH 3 CN can lose the acetonitrile ligand to generate a coordination polymer consistent with the formula “(py3tren)CoCu” (2). One-electron chemical oxidation of 2-CH 3 CN with AgOTf generated (py 3 tren)CoCuOTf (1-OTf). The Cu(II)/Cu(I) redox couple for 1-OTf and 2-CH 3 CN is reversible at -0.56 and -0.33 V vs Fc + /Fc, respectively. The copper oxidation state impacts the electronic structure of the heterobimetallic core, as well as the nature of the Co–Cu interaction. Quantum chemical calculations showed modest electron delocalization in the (CoCu) +4 state via a Co–Cu σ bond that is weakened by partial population of the Co–Cu σ antibonding orbital. By contrast, no covalent Co–Cu bonding is predicted for the (CoCu) +3 analogue, and the d-electrons are fully localized at individual metals.
Toward quantum computing for high-energy excited states in molecular systems: quantum phase estimations of core-level states
This paper explores the utility of the quantum phase estimation (QPE) in calculating high-energy excited states characterized by promotions of electrons occupying inner energy shells. These states have been intensively studied over the last few decades especially in supporting the experimental effort at light sources. Results obtained with the QPE are compared with various high-accuracy many-body techniques developed to describe core-level states. The feasibility of the quantum phase estimator in identifying classes of challenging shake-up states characterized by the presence of higher-order excitation effects is also discussed.
A Nonorthogonal State-Interaction Approach for Matrix Product State Wave Functions
We present a state-interaction approach for matrix product state (MPS) wave functions in a nonorthogonal molecular orbital basis. Our approach allows us to calculate, for example, transition and spin–orbit coupling matrix elements between arbitrary electronic states, provided that they share the same one-electron basis functions and size of the active orbital space, respectively. The key element is the transformation of the MPS wave functions of different states from a nonorthogonal to a biorthonormal molecular orbital basis representation, by exploiting a sequence of nonunitary transformations, following a proposal by Malmqvist [Int. J. Quantum Chem.1986, 30, 479]. This is well-known for traditional wave function parametrizations but has not yet been exploited for MPS wave functions.
Prediction of Transition-State Scaling Relationships and Universal Transition-State Vibrational and Entropic Correlations for Dehydrogenations
Linear scaling relationships (LSRs) and Brønsted–Evans–Polanyi (BEP) or transition-state scaling (TSS) relations aid with the prediction of electronic energies. However, temperature effects and pre-exponentials are often taken as constants across metal surfaces or a homologous series. Vibrational scaling relationships (VSRs) offer a way to determine such parameters. Transition-state VSRs (TSVSRs) between local minima and transition states of AH X (A = C, N, O) surface diffusions correlate with BEP relations and broaden to thermochemical property scaling. Using density functional theory, we extend TSVSRs to AHX dehydrogenation reactions on transition-metal surfaces, relating vibrational modes of local minima to transition states. We first predict the slopes of the TSS relations by incorporating bond angles using the Slater–Koster structure factors and hybridization through crystal orbital overlap population analysis and energy overlap integrals between adsorbates and metal surfaces. Additionally, we uncover universal thermochemical property scaling, enabling the estimation of entropies and temperature corrections to enthalpies across a homologous series. Here, we demonstrate both significant vibrational corrections in reactions with low intrinsic electronic barriers and considerable variation in the pre-exponential of a simple dehydrogenation reaction across metals and AH X adsorbates.
Generating Bright Emissive States by Modulating the Bandgap of Monolayer Tungsten Diselenide
Transition metal dichalcogenides (TMDs) are essential due to their fascinating electronic and optical properties, strong exciton binding energy, and layer-dependent bandgap. They can be tuned to function as a single-photon emitter, but the quantum yield of photoluminescence of single-layer WSe 2 is low. There is some evidence that a bright emissive state can be produced by introducing local defects through functionalization. In this paper we use spin-polarized periodic density functional theory (DFT) to study the effect of functionalization for the specific case of cyclic carbenes. We find that the simplest of these molecules, cyclopentadiene carbene (Cyc), binds to the surface by a covalent bond leading to a substantial change in the bandgap (1.24 eV compared to 1.64 eV for the pristine surface). Moreover, there are semiflat bands below the Fermi level that originate from σ bonding and the interaction between the lone-pair p orbitals on the carbon of Cyc that bonds with Se on the TMD. Cyc is found to form a Type IIa heterojunction before and after contact with the surface, where the “a” refers to ordering of the energy levels where the TMD levels have the larger splitting and “b” to the reverse. The effect of various electron-withdrawing and electron-donating groups on Cyc is investigated, and it is found that the direct bandgap and heterointerfaces can be chemically tuned with covalently bound functional groups. With an electron-withdrawing group (EWG) such as –CHO, –COCl, and –CN attached to Cyc, a Type III//Type IIa interface is formed, whereas all other EWGs used in this study form a Type IIa junction, before and after contact to the surface. The electron-donating groups (EDG) form Type Ib//Type Ia junctions, and in particular, we find that the system WSe 2 + Cyc-Me band structure consists of semiflat bands at valence band maxima localized on Cyc-Me and the conduction band minimum is coupled between the surface and functional group with a direct bandgap of 0.88 eV. Hence, we predict that the Cyc-Me-functionalized monolayer WSe 2 will produce a red-shifted bright emissive state. Furthermore, we also find that carbenes with the Cyc all-carbon ring have (1) a triplet ground state and (2) form covalent bonds to WSe 2 , while heterocyclic carbenes (1) have a singlet ground state and (2) do not form covalent bonds to WSe 2 .
Ab Initio Study of Covalency in the Ground versus Core-Excited States and X-ray Absorption Spectra of Actinide Complexes
Relativistic multireference ab initio wave function calculations within the restricted active space (RAS) framework were performed to calculate metal and ligand X-ray absorption (XAS) near-edge spectroscopy (XANES) intensities for the metal M 4,5 edges of [PuO 2 (H 2 O) 5 ] 2+ , [An VI O 2 ] 2+ (An = U, Np, Pu), and [AmCl 6 ] 3– and the Cl K edge of the Am complex. The extent of An(5f)–ligand bonding was determined via natural localized molecular orbital analyses of the relevant spin–orbit coupled multireference states. The calculated spectra are in good agreement with experiments and allow a detailed assignment of the observed spectral features. The XANES M 4,5 -edge spectra are representative of the actinide orbital covalency in the probed core-excited states, which may be different from the ground-state covalency. Furthermore, an assignment of ground-state An orbital covalency based on XAS spectra should therefore be made with caution.
Photoinduced Anomalous Coulomb Blockade and the Role of Triplet States in Electron Transport through an Irradiated Molecular Transistor
In the present study, we explore photoinduced electron transport through a molecule weakly coupled to two electrodes by combining first-principles quantum chemistry calculations with a Pauli master equation approach that accounts for many-electron states. In the incoherent limit, we demonstrate that energy-level alignment of triplet and charged states plays a crucial role, even when the rate of intersystem crossing is much smaller than the rate of fluorescence. Furthermore, the field intensity dependence and an upper bound to the photoinduced electric current can be analytically derived in our model. Under an optical field, the conductance spectra (charge stability diagrams) exhibit unusual Coulomb diamonds, which are associated with molecular excited states, and their widths can be expressed in terms of energies of the molecular electronic states. This study offers new directions for exploring optoelectronic response in nanoelectronics.
Characterizing Density and Spatial Distribution of Trap States in Ta 3 N 5 Thin Films for Rational Defect Passivation
Tantalum nitride (Ta 3 N 5 ) has gained significant attention as a potential photoanode material, yet it has been challenged by material quality issues. Defect-induced trap states are detrimental to the performance of any semiconductor material. Beyond influencing the performance of Ta 3 N 5 films, defects can also accelerate the degradation in water during desired electrochemical applications. Defect passivation has provided an enormous boost to the development of many semiconductor materials but is currently in its infancy for Ta 3 N 5 . This is in part due to a lack of experimental understanding regarding the spatial and energetic distribution of trap states throughout Ta 3 N 5 thin films. Here, we employ drive-level capacitance profiling (DLCP) to experimentally resolve the spatial and energetic distribution of trap states throughout Ta 3 N 5 thin films. The density of deeper energetic traps is found to reach ∼2.5 to 6 × 10 22 cm –3 at the interfaces of neat Ta 3 N 5 thin films, over an order of magnitude greater than the bulk. In addition to the spatial profile of deep trap states, we report neat Ta 3 N 5 thin films to be highly n-type in nature, owning a free carrier density of ∼9.74 × 10 17 cm –3 . This information, coupled with the present understanding of native oxide layers on Ta 3 N 5 , has facilitated the rational design of a targeted passivation strategy that simultaneously provides a means for catalyst immobilization. Loading catalyst via silatrane moieties suppresses the density of defects at the surface of Ta 3 N 5 thin films by two orders of magnitude, while also reducing the free carrier density of films by over one order of magnitude, effectively dedoping the films to ∼2.40 × 10 16 cm –3 . The surface passivation of Ta 3 N 5 films translates to suppressed defect-induced trapping and recombination of photoexcited carriers, as determined through absorption, photoluminescence, and transient photovoltage. Here, this illustrates how developing a deeper understanding of the distribution and influence of defects in Ta 3 N 5 thin films has the potential to guide future works and ultimately accelerate the integration and development of high-performance Ta 3 N 5 thin film devices.
U.S. Manufacturing Water Use Data and Estimates: Current State, Limitations, and Future Needs for Supporting Manufacturing Research and Development
Water is essential to manufacturing operations; without it, many facilities could not operate or meet production demands. Physical, reputational, and regulatory risks to water supplies compounded by climate change-induced impacts on hydrological conditions threaten the adequacy of water supplies for manufacturing. Manufacturing water use has not been a major focus of either water or manufacturing-related research. Research and development (R&D) aimed at helping manufacturers use water more sustainably and adapt to changing water conditions is needed to ensure a thriving sector and economy. However, the ability to identify R&D needs is severely limited due to a lack of current, statistically representative data on manufacturing water use and its environmental implications. In this Perspective, we outline four key questions to inform R&D on manufacturing use and highlight how the current state of water data in the United States does not support the adequate investigation of these questions. We make recommendations for the water data characteristics needed to explore the research questions and knowledgeably inform R&D on manufacturing water use.
Direct Observation of Modulated Radical Spin States in Metal–Organic Frameworks by Controlled Flexibility
Owing to their switchable spin states and dynamic electronic character, organic-based radical species have been invoked in phenomena unique to a variety of fields. When incorporated in solid state materials, generation of organic radicals proves challenging due to aggregation. Metal–organic frameworks (MOFs) are promising candidates for immobilization and stabilization of organic radicals because of the tunable spatial arrangement of organic linkers and metal nodes, which sequesters the reactive species. Herein, a flexible, redox-active tetracarboxylic acid linker bearing two imidazole units was chosen to construct a new Zr 6 -MOF, NU-910, with scu topology. By exploiting the structural flexibility of NU-910, we successfully modulate the dynamics between an isolated organic radical species and an organic radical π-dimer species in the MOF system. Single-crystal X-ray diffraction analysis reveals that through solvent exchange from N,N-diethylformamide to acetone, NU-910 undergoes a structural contraction with interlinker distances decreasing from 8.32 Å to 3.20 Å at 100 K. Organic radical species on the bridging linkers are generated via UV light irradiation. Direct observation of temperature-induced spin switches from an isolated radical species to a magnetically silent radical π-dimer in NU-910 after irradiation in the solid state was achieved via variable-temperature single-crystal X-ray diffraction and variable-temperature electron paramagnetic resonance spectroscopy. Ultraviolet–visible–near infrared spectroscopy and density functional theory calculations further substantiated the formation of a radical cation π-dimer upon irradiation. As a result, this work demonstrates the potential of using flexible MOFs as a platform to modulate radical spin states in the solid phase.
Meta-Atom Behavior in Clusters Revealing Large Spin Ground States
Abstract not provided
Molecular Excited States: Accurate Calculation of Relative Energies and Electronic Coupling Between Charge Transfer and Non-Charge Transfer States
We show for a series of six small donor–acceptor dyads that the energy difference between non-charge transfer (non-CT) and charge transfer (CT) excited states, as well as the squares of the electronic couplings between these states, can be predicted from first-principles using variational orbital adapted configuration interaction singles (VOA-CIS) theory. VOA-CIS correctly predicts the observed experimental trends in these values and provides quantitative accuracy roughly on par with a modern long-range corrected density functional, ωB97X. Using VOA-CIS and ωB97X, the experimental energy difference between the non-CT and CT excited states is predicted with root mean squared errors of 0.22 eV and 0.21 eV, respectively. The square of the electronic coupling between these states is predicted with root mean squared errors of 0.08 eV 2 and 0.07 eV 2 , respectively. Here, orbital optimized CIS (OO-CIS) and CIS(D), two perturbative corrections to CIS, provide a significant correction to the errant relative energies predicted by CIS, but the correction is insufficient to recover the experimentally observed trend.
Emergence of coherence in the charge-density wave state of 2H-NbSe2
A charge-density wave (CDW) state has a broken symmetry described by a complex order parameter with an amplitude and a phase. The conventional view, based on clean, weak-coupling systems, is that a finite amplitude and long-range phase coherence set in simultaneously at the CDW transition temperature T-cdw. Here we investigate, using photoemission, X-ray scattering and scanning tunnelling microscopy, the canonical CDW compound 2H-NbSe2 intercalated with Mn and Co, and show that the conventional view is untenable. We find that, either at high temperature or at large intercalation, CDW order becomes short-ranged with a well-defined amplitude, which has impacts on the electronic dispersion, giving rise to an energy gap. The phase transition at T-cdw marks the onset of long-range order with global phase coherence, leading to sharp electronic excitations. Our observations emphasize the importance of phase fluctuations in strongly coupled CDW systems and provide insights into the significance of phase incoherence in 'pseudogap' states.
Multiresolution quantum chemistry in multiwavelet bases: excited states from time-dependent Hartree–Fock and density functional theory via linear response
Using the fully numerical method for time-dependent Hartree–Fock and density functional theory (TD-HF/DFT) with the Tamm–Dancoff (TD) approximation we use a multiresolution analysis (MRA) approach to present our findings. From a reformulation with effective use of the density matrix operator, we obtain a general form of the HF/DFT linear response equation in the first quantization formalism. It can be readily rewritten as an integral equation with the bound-state Helmholtz (BSH) kernel for the Green's function. The MRA implementation of the resultant equation permits excited state calculations without virtual orbitals. Moreover, the integral equation is efficiently and adaptively solved using a numerical multiresolution solver with multiwavelet bases. Our implementation of the TD-HF/DFT methods is applied for calculating the excitation energies of H 2 , Be, N 2 , H 2 O, and C 2 H 4 molecules. The numerical errors of the calculated excitation energies converge in proportion to the residuals of the equation in the molecular orbitals and response functions. The energies of the excited states at a variety of length scales ranging from short-range valence excitations to long-range Rydberg-type ones are consistently accurate. It is shown that the multiresolution calculations yield the correct exponential asymptotic tails for the response functions, whereas those computed with Gaussian basis functions are too diffuse or decay too rapidly. Finally, we introduce a simple asymptotic correction to the local spin-density approximation (LSDA) so that in the TDDFT calculations, the excited states are correctly bound.
Approximate DFT-based methods for generating diabatic states and calculating electronic couplings: models of two and more states
Four types of density functional theory (DFT)-based approaches are assessed in this work for the approximate construction of diabatic states and the evaluation of electronic couplings between these states. These approaches include the constrained DFT (CDFT) method, the constrained noninteracting electron (CNE) model to post-process Kohn–Sham operators, the approximate block-diagonalization (BD) of the Kohn–Sham operators, and the generalized Mulliken–Hush method. It is shown that the first three approaches provide a good description for long-distance intermolecular electron transfer (ET) reactions. On the other hand, inconsistent results were found when applying these approaches to intramolecular ET in strongly coupled, mixed-valence systems. Model analysis shows that this discrepancy is caused by the inappropriate use of the two-state model rather than the defects of the approaches themselves. The situation is much improved when more states are included in the model electronic Hamiltonian. The CNE and BD approaches can thus serve as efficient and robust alternatives for building ET models based on DFT calculations.
Solid-state electrolyte considerations for electric vehicle batteries
This paper is an overview of materials and cell fabrication considerations for all solid-state batteries meant for large format applications.
Influence of spin state and electron configuration on the active site and mechanism for catalytic hydrogenation on metal cation catalysts supported on NU-1000: insights from experiments and microkinetic modeling
Spin state is found to determine the mechanism and active site of catalytic hydrogenation on metal cation catalysts.