Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “standardized data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Holographic interferometry of transparent media with reflection from imbedded test objects

In applying holographic interferometry, opaque objects blocking a portion of the optical beam used to form the interferogram give rise to incomplete data for standard computer tomography algorithms. An experimental technique for circumventing the problem of data blocked by opaque objects is presented. The missing data are completed by forming an interferogram using light backscattered from the opaque object, which is assumed to be diffuse. The problem of fringe localization is considered.

Prikryl, I.↗

Cryptography Would Reveal Alterations In Photographs

Public-key decryption method proposed to guarantee authenticity of photographic images represented in form of digital files. In method, digital camera generates original data from image in standard public format; also produces coded signature to verify standard-format image data. Scheme also helps protect against other forms of lying, such as attaching false captions.

Friedman, Gary L.↗

Low-Cost, User-Friendly, Rapid Analysis of Dynamic Data System Established

An issue of primary importance to the development of new jet and certain other airbreathing combined-cycle powered aircraft is the advancement of airframe-integrated propulsion technologies. Namely, engine inlets and their systems and subsystems are required to capture, convert, and deliver the atmospheric airflow demanded by such engines across their operating envelope in a form that can be used to provide efficient, stable thrust. This must be done while also minimizing aircraft drag and weight. Revolutionary inlet designs aided by new technologies are needed to enable new missions. An unwanted byproduct of pursuing these inlet technologies is increased time-variant airflow distortion. Such distortions reduce propulsion system stability, performance, operability, and life. To countermand these limitations and fully evaluate the resulting configurations, best practices dictate that this distortion be experimentally measured at large scale and analyzed. The required measurements consist of those made by an array of high-response pressure transducers located in the flow field at the aerodynamic interface plane (AIP) between the inlet and engine. Although the acquisition of the necessary pitot-pressure time histories is relatively straight-forward, until recent years, the analysis has proved to be very time-consuming, tedious, and expensive. To transform the analysis of these data into a tractable and timely proposition, researchers at the NASA Glenn Research Center created and established the Rapid Analysis of Dynamic Data (RADD) system. The system provides complete, near real-time analysis of time-varying inlet airflow distortion datasets with report quality output. This fully digital approach employs Institute of Electrical and Electronics Engineers (IEEE) binary data file format standardization to establish data-acquisition-system-independent processing on low cost personal computers. Features include invalid instrumentation code-out, logging, and multiple replacement schemes as needed for each channel of instrumentation. The AIP pressure distribution can be interpolated to simulate measurements by alternate AIP probe arrays, if desired. In addition, the RADD system provides for the application of filters that can be used to focus the analysis on the frequency range of interest.

Arend, David J.↗

Integrating Engineering Data Systems for NASA Spaceflight Projects

NASA has a large range of custom-built and commercial data systems to support spaceflight programs. Some of the systems are re-used by many programs and projects over time. Management and systems engineering processes require integration of data across many of these systems, a difficult problem given the widely diverse nature of system interfaces and data models. This paper describes an ongoing project to use a central data model with a web services architecture to support the integration and access of linked data across engineering functions for multiple NASA programs. The work involves the implementation of a web service-based middleware system called Data Aggregator to bring together data from a variety of systems to support space exploration. Data Aggregator includes a central data model registry for storing and managing links between the data in disparate systems. Initially developed for NASA's Constellation Program needs, Data Aggregator is currently being repurposed to support the International Space Station Program and new NASA projects with processes that involve significant aggregating and linking of data. This change in user needs led to development of a more streamlined data model registry for Data Aggregator in order to simplify adding new project application data as well as standardization of the Data Aggregator query syntax to facilitate cross-application querying by client applications. This paper documents the approach from a set of stand-alone engineering systems from which data are manually retrieved and integrated, to a web of engineering data systems from which the latest data are automatically retrieved and more quickly and accurately integrated. This paper includes the lessons learned through these efforts, including the design and development of a service-oriented architecture and the evolution of the data model registry approaches as the effort continues to evolve and adapt to support multiple NASA programs and priorities.

Carvalho, Robert E.↗

CEOS Virtual Data Repositories for WGISS Data Assets

The Committee on Earth Observation Satellites (CEOS), established in 1984 to coordinate civil space-borne observations of the Earth, through its Working Group on Information Systems and Services (WGISS) has been working towards aligning data repositories held by each of the member international agencies. The CEOS agencies hold a vast amount of earth observation data across science domains. WGISS has been working to agree on community standards for data and information discovery and to increase the interoperability and alignment among the member data repositories.

Enloe, Yonsook↗

Using A Guided Interview to Create an Individual Exposure Profile for The Lifetime Surveillance of Astronaut Health (LSAH)

BACKGROUND To support NASA’s Lifetime Surveillance of Astronaut Health (LSAH) project, Individual Exposure Profiles (IEPs) were developed to record an astronaut’s pre-, in-, and post-NASA exposures. NASA astronauts were invited to participate in a one-time guided interview to review known hazard exposures and medical history documented in NASA records and to add new information not otherwise reported. The purpose of the IEP project was to determine if any significant information was gained from these interviews and identify potential trends in long-term health. METHODOLOGY The pre-filled exposure profile data was extracted from several sources including medical records, biographies, and LSAH records. The information that was pre-filled before the interview included occupational exposures prior to selection to the Astronaut Corps, during active astronaut career (e.g., EVA and ground-based training, on-orbit exposures), and after active career. The IEPs also contained relevant medical history (e.g., audiometry, illnesses, injuries) and significant non-occupational exposures. 189 interviews were conducted from 2012-2014. A Microsoft Access database was created to store the information collected in the IEPs before and after the interviews. The database houses the information from the IEPs to track the updates made to the original data. By analyzing which astronauts supplied additional information and which kinds of data were consistently added, potential gaps and trends in missing data may be identified. In designing the database, an efficient structure was implemented for ease of inputting data and to create variables that would generate quantifiable data. Creating standardized variables within the structure helped ease the process of inputting, organizing data, and analyzing data. Additional updates/data were denoted and were categorized by type of update. The categories identified were “Confirmed”, “Confirmed & Supplemented”, “Supplemented”, “Denied”, “Denied & Supplemented”, and “Other”. STATISTICAL ANALYSIS AND RESULTS To assess frequency of exposure updates, descriptive statistics will be generated and stratified by relevant factors such as astronaut selection decade, age at selection, and program/era. Hypothesis testing will be performed to understand the associations between updates to exposure information and population characteristics.

Astronaut health↗

Globally Gridded Satellite (GridSat) Observations for Climate Studies

Geostationary satellites have provided routine, high temporal resolution Earth observations since the 1970s. Despite the long period of record, use of these data in climate studies has been limited for numerous reasons, among them: there is no central archive of geostationary data for all international satellites, full temporal and spatial resolution data are voluminous, and diverse calibration and navigation formats encumber the uniform processing needed for multi-satellite climate studies. The International Satellite Cloud Climatology Project set the stage for overcoming these issues by archiving a subset of the full resolution geostationary data at approx.10 km resolution at 3 hourly intervals since 1983. Recent efforts at NOAA s National Climatic Data Center to provide convenient access to these data include remapping the data to a standard map projection, recalibrating the data to optimize temporal homogeneity, extending the record of observations back to 1980, and reformatting the data for broad public distribution. The Gridded Satellite (GridSat) dataset includes observations from the visible, infrared window, and infrared water vapor channels. Data are stored in the netCDF format using standards that permit a wide variety of tools and libraries to quickly and easily process the data. A novel data layering approach, together with appropriate satellite and file metadata, allows users to access GridSat data at varying levels of complexity based on their needs. The result is a climate data record already in use by the meteorological community. Examples include reanalysis of tropical cyclones, studies of global precipitation, and detection and tracking of the intertropical convergence zone.

Knapp, Kenneth R.↗

Short-Arc Analysis of Intersatellite Tracking Data in a Gravity Mapping Mission

A technique for the analysis of low-low intersatellite range-rate data in a gravity mapping mission is explored. The technique is based on standard tracking data analysis for orbit determination but uses a spherical coordinate representation of the 12 epoch state parameters describing the baseline between the two satellites. This representation of the state parameters is exploited to allow the intersatellite range-rate analysis to benefit from information provided by other tracking data types without large simultaneous multiple data type solutions. The technique appears especially valuable for estimating gravity from short arcs (e.g., less than 15 minutes) of data. Gravity recovery simulations which use short arcs are compared with those using arcs a day in length. For a high-inclination orbit, the short-arc analysis recovers low-order gravity coefficients remarkably well, although higher order terms, especially sectorial terms, are less accurate. Simulations suggest that either long or short arcs of GRACE data are likely to improve parts of the geopotential spectrum by orders of magnitude.

Rowlands, David D.↗

SLR Station Recovery, Center of Frame Motion, and Time Varying Gravity

Weekly station position estimates, beginning with 1993, are derived from the ITRF2008-based SLR processing of up to four satellites: Lageos 1, Lageos2, Starlette, and Stella. Helmert parameters obtained from c omparison of weekly SLR station positions and the a-priori SLRF2008 station complement are evaluated for geocenter motion and scale. Two me thods for modeling time varying gravity are employed in the SLR satel lite POD processing, with GGM03S serving as the static gravity field. Both methods forward model atmosphere gravity derived from 6-hour ECM WF pressure data. The standard approach applies an annual 20x20 field estimated from 4 years of GRACE data, and the IERS2003 recommended linear rates for C20, C30, C40, C21, and S21. The alternate approach us es a new set of low-order/degree 4x4 coefficients estimated weekly fr om SLR & DORIS processing to 10 satellites from 1993-2012. This exper imental tvg4x4 model has been shown to improve the TOPEX, Jason-1, and Jason-2 altimeter satellite orbits,. In this paper we apply the more detailed time-variable gravity modeling to the SLR satellite POD pro cessing and subsequent reference frame analyses. For this study we will evaluate the orbit differences (periodic and secular) for the satel lites concerned, characterize the impact on the station coordinate solutions, and the impact on reference frame parameters (geocenter and s cale).

Zelensky, Nikita P.↗

Standard techniques for presentation and analysis of crater size-frequency data

In September 1977, a crater studies workshop was held for the purpose of developing standard data analysis and presentation techniques. This report contains the unanimous recommendations of the participants. This first meeting considered primarily crater size-frequency data. Future meetings will treat other aspects of crater studies such as morphologies.

Source record↗

Standard techniques for presentation and analysis of crater size-frequency data

In September 1977 a crater studies workshop was held for the purpose of developing standardized data analysis and presentation techniques. The present report contains the unanimous recommendations of the participants. Recommendations are devoted primarily to crater size-frequency data and refer to cumulative and relative size-frequency distribution plots and to morphological analysis.

Arvidson, R.↗

Active Missions and the VxOs with THEMIS as an Example

The Virtual Observatories (VxOs) provide a host of services to data producers and researchers. They help data producers to describe their data in standard Space Physics Archive Search and Extract (SPASE) terms that enable scientists to understand data products from a wide range of missions. They offer search interfaces based on specified criteria that help researchers discover conjunctions, prominent events, and intervals of interest. In this talk, we show how VMO services can be used with Time History of Events and Macroscale Interactions during Substorms (THEMIS) observations to identify magnetotail intervals marked by high speed flows, enhanced densities, or high temperatures. We present statistical surveys of when and where these phenomena occur. We then show how the VMO services can be used to identify events in which two or more THEMIS spacecraft observe specified features for more detailed analysis. We conclude by discussing the current limitations of VMO tools and outline plans for the future.

Sibeck, D. G.↗

The Nasa SRA Process as It Relates to Open-Source Workflows Developed for GeneLab Data Processing

To release open, standards-compliant processed data sets in the Open Science Data Repository (OSDR), the GeneLab Data Processing team works with the scientific community through the OSDR Analysis Working Groups to design and build open-source data processing pipelines. Once baselined internally, these pipelines are wrapped into workflows and published on the NASA GeneLab Data Processing public GitHub repository along with detailed instructions for installation and use. Each workflow must be approved through NASA's Software Release Authorization (SRA) process prior to publishing. However, the SRA process lacks sufficient documentation and clarity regarding which forms are applicable for new open-source software that utilizes publicly available 3rd party tools, and the SRA process can take several months to complete, making sharing software outside of NASA cumbersome and in contradiction with the concept of Open Science. Furthermore, the SRA process was designed as a one-size fits all approach and thus many of the questions asked are not applicable to our open-source workflows. Here we describe the software provided on the NASA GeneLab Data Processing GitHub repository, summarize our experiences with the SRA process to release these software, and propose a more stream-lined approach for review of open-source projects.

Software Release Authorization↗

The NASA SRA Process as it Relates to Open-Source Workflows Developed for GeneLab Data Processing

To release open, standards-compliant processed data sets in the Open Science Data Repository (OSDR), the GeneLab Data Processing team works with the scientific community through the OSDR Analysis Working Groups to design and build open-source data processing pipelines. Once baselined internally, these pipelines are wrapped into workflows and published on the NASA GeneLab Data Processing public GitHub repository along with detailed instructions for installation and use. Each workflow must be approved through NASA's Software Release Authorization (SRA) process prior to publishing. However, the SRA process lacks sufficient documentation and clarity regarding which forms are applicable for new open-source software that utilizes publicly available 3rd party tools, and the SRA process can take several months to complete, making sharing software outside of NASA cumbersome and in contradiction with the concept of Open Science. Furthermore, the SRA process was designed as a one-size fits all approach and thus many of the questions asked are not applicable to our open-source workflows. Here we describe the software provided on the NASA GeneLab Data Processing GitHub repository, summarize our experiences with the SRA process to release these software, and propose a more stream-lined approach for review of open-source projects.

Software Release Authorization↗

NIMBUS 7 Earth Radiation Budget (ERB) Matrix User's Guide. Volume 2: Tape Specifications

The ERB MATRIX tape is generated by an IBM 3081 computer program and is a 9 track, 1600 BPI tape. The gross format of the tape given on Page 1, shows an initial standard header file followed by data files. The standard header file contains two standard header records. A trailing documentation file (TDF) is the last file on the tape. Pages 9 through 17 describe, in detail, the standard header file and the TDF. The data files contain data for 37 different ERB parameters. Each file has data based on either a daily, 6 day cyclic, or monthly time interval. There are three types of physical records in the data files; namely, the world grid physical record, the documentation mercator/polar map projection physical record, and the monthly calibration physical record. The manner in which the data for the 37 ERB parameters are stored in the physical records comprising the data files, is given in the gross format section.

Ray, S. N.↗

Standardizing Algorithm Documentation For Improved Scientific Data Understanding: The Algorithm Publication Tool Prototype

Algorithm Theoretical Basis Documents (ATBDs) are documents which accompany Earth observation data products generated from algorithms. While ATBDs are essential to scientific reproducibility, these key documents are not standardized and are often difficult to find. In this paper, we present the prototype Algorithm Publication Tool (APT), a cloud-based ATBD authoring and editing tool for NASA’s Earth science data systems. A standardized ATBD information model is also described as well as lessons learned from developing the prototype tool.

Kaylin Bugbee↗

Laser Doppler technology applied to atmospheric environmental operating problems

Carbon dioxide laser Doppler ground wind data were very favorably compared with data from standard anemometers. As a result of these measurements, two breadboard systems were developed for taking research data: a continuous wave velocimeter and a pulsed Doppler system. The scanning continuous wave laser Doppler velocimeter developed for detecting, tracking and measuring aircraft wake vortices was successfully tested at an airport where it located vortices to an accuracy of 3 meters at a range of 150 meters. The airborne pulsed laser Doppler system was developed to detect and measure clear air turbulence (CAT). This system was tested aboard an aircraft, but jet stream CAT was not encountered. However, low altitude turbulence in cumulus clouds near a mountain range was detected by the system and encountered by the aircraft at the predicted time.

Weaver, E. A.↗

An Interferometry Imaging Beauty Contest

We present a formal comparison of the performance of algorithms used for synthesis imaging with optical/infrared long-baseline interferometers. Six different algorithms are evaluated based on their performance with simulated test data. Each set of test data is formated in the interferometry Data Exchange Standard and is designed to simulate a specific problem relevant to long-baseline imaging. The data are calibrated power spectra and bispectra measured with a ctitious array, intended to be typical of existing imaging interferometers. The strengths and limitations of each algorithm are discussed.

aperture synthesis↗