Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Direct observation of charge mediated lattice distortions in complex oxide solid solutions

Using aberration corrected scanning transmission electron microscopy combined with advanced imaging methods, we directly observe atom column specific, picometer-scale displacements induced by local chemistry in a complex oxide solid solution. Displacements predicted from density functional theory were found to correlate with the observed experimental trends. Further analysis of bonding and charge distribution was used to clarify the mechanisms responsible for the detected structural behavior. By extending the experimental electron microscopy measurements to previously inaccessible length scales, we identified correlated atomic displacements linked to bond differences within the complex oxide structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spectroscopic and laser characteristics of ceramics based on Yb{sup 3+}-doped Lu{sub 2}O{sub 3}–Y{sub 2}O{sub 3} solid solution

We report on quasi-cw lasing at a wavelength of 1031 nm with a maximum power of 8 W and a slope efficiency of 32.3 % achieved in a thin-disk ceramic element based on ytterbium-doped solid solution of yttrium and lutetium sesquioxides. A sample of Yb : (Lu, Y){sub 2}O{sub 3} ceramics was fabricated by solid-state sintering of nanosized particles of a predetermined composition synthesised by laser ablation. The study of the spectral and luminescent characteristics of the obtained ceramics shows that partial substitution of Y{sup 3+} cations by Lu{sup 3+} cations broadens the absorption, luminescence, and laser spectra and shifts their peaks with respect to those of Yb:Y{sub 2}O{sub 3} ceramics. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Microstructure and mechanical properties of oxide dispersion strengthened FeCoNi concentrated solid solution alloys

Microstructure and mechanical properties of two kinds of oxide dispersion strengthened concentrated solid solution alloys (CSAs), FeCoNi-1.5Y 2 O 3 (FCNY) and FeCoNi-1.2Ti-1.5Y 2 O 3 (FCNTY), are studied through a comparing investigation with FeCoNi (FCN) CSAs. All these alloys are fabricated by mechanical alloying, spark plasma sintering, hot rolling and annealing treatment. For three kinds of alloys, both the as-milled powders and bulk materials are of single face-centered cubic structure. Electron backscattered diffraction results reveal that the texture transformation is suppressed during the hot rolling process because the movement of grain boundaries is hindered by the oxide particles. Compared with FCN CSAs, grains are refined by 43% and 47% for FCNY and FCNTY CSAs, respectively. Nano-sized Y 2 O 3 (monoclinic structure) and Y 2 Ti 2 O 7 (pyrochlore structure) particles are uniformly distributed in FCNY and FCNTY CSAs, respectively. Both Y2O3 and Y2Ti2O7 particles show a semi-coherent relationship with the matrix. Yield strength of FCN, FCNY and FCNTY CSAs is 559, 981 and 1050 MPa, respectively. Theoretical calculations illustrate that high strength of FCNY and FCNTY CSAs comes from refined grains and high-density nano-sized oxide particles.

36 MATERIALS SCIENCE↗

High Voltage Mg-Ion Battery Cathode via a Solid Solution Cr–Mn Spinel Oxide

We discuss how lattice Mg 2+ in a tailored solid solution spinel, MgCrMnO 4 , is electrochemically utilized at high Mn-redox potentials in a nonaqueous electrolyte. Complementary evidence from experimental and theoretical analyses supports bulk Mg 2+ (de)intercalation throughout the designed oxide frame where strong electrostatic interaction between Mg 2+ and O 2- exists. Mg/Mn antisite inversion in the spinel is lowered to similar to 10% via postannealing at 350 degrees C to further improve Mg 2+ mobility. Spinel lattice is preserved upon removal of Mg 2+ without any phase transformations, denoting structural stability at the charged state at a high potential similar to 3.0 V (vs Mg/Mel. Clear remagnesiation upon first discharge, harvesting up to similar to 180 Wh/kg at 60 degrees C is shown. In the remagnesiated state, insertion of Mg 2+ into interstitial sites in the spinel is detected, possibly resulting in partial reversibility which needs to be addressed for structural stability. The observations constitute a first clear path to the development of a practical high voltage Mg-ion cathode using a spinel oxide.

25 ENERGY STORAGE↗

Size Effect in the Phase Separation of Cr–W Solid Solutions

Size effects in phase transformations of nanoscale systems show up as significant changes in their phase diagram. Here, using a thermodynamic approach we demonstrate how the immiscibility region of Cr–W solid solutions is influenced by their particle size. For 40- and 70-nm-diameter particles, we consider two thermodynamically stable states with a core–shell configuration, differing in the composition of the core phase. It is shown that, in the nanometer range, one of these states becomes metastable and that the phase diagrams of the stable and metastable states differ significantly. Reducing the particle size leads to a decrease in the upper critical dissolution temperature (UCDP) by 300–400 K and marked changes in the mutual solubility of the components at temperatures comparable to the UCDP.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nonisothermal Nucleation in the Solid Solution CuCl in Glass: Temperature Range of the Formation of Supercritical Nuclei of CuCl Phase

It is established both experimentally and by calculations that the nuclei of CuCl phase do not form in the solid solution of CuCl in the glass at the temperature T{sub u} ≥ 600°C. At the temperature of 500°C, nuclei do not form due to a low diffusion coefficient. In the temperature range of 500–600°C maximums of the flow of new clusters and the critical radius are almost at the same temperature. The supersaturation is minimal in the area of maximum. The experimental dependence of the formation rate of CuCl clusters on temperature is in a good agreement with the calculated one. It is shown that the concentration of nuclei, its average radius, and the width of distribution by radii can be effectively controlled using the cooling “on the top.” The narrow distributions of CuCl clusters in the glass with the relative half-width of about 3.7% are obtained.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phonon spectroscopy of the low-energy excitations in the solid solutions of yttrium–rare-earth metal–aluminum garnets

The transport characteristics of thermal-frequency phonons and the specific heat of a series of single crystals of yttrium–rare-earth metal–aluminum garnet solid solutions are studied at the helium temperatures. It is found that the existence of low-energy levels of various origins, which are responsible for an increase in the specific heat, retards phonon transport by one–three orders of magnitude. The temperature dependences of specific heat and the kinetic characteristics of phonons have a similar character.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of the structural and magnetic phase-transitions and multiferroic properties in BiFeO3-Ba0.95Ca0.05TiO3 solid solutions

Highlights: • The detailed structural analysis has been done for (1-x) BiFeO{sub 3}-xBa{sub 0.95}Ca{sub 0.05}TiO{sub 3} (0.1 ≤ x ≤ 0.9). • The detailed magnetic behavior has been studied for (1-x) BiFeO{sub 3}-xBa{sub 0.95}Ca{sub 0.05}TiO{sub 3} (0.1 ≤ x ≤ 0.9). • The dielectric constant (ε') and the dielectric loss (ε'') versus frequency curves have been fitted by using Cole-Cole dispersion formula and non-Debye relaxation behavior has been found. • The weak magnetodielectric response (MD) has been found. • The non saturating P-E loops have been found for 0.7 ≤ x ≤ 0.9 samples. - Abstract: We synthesized (1-x) BiFeO{sub 3}-x Ba{sub 0.95}Ca{sub 0.05}TiO{sub 3} solid solutions for 0.1 ≤ x ≤ 0.9, using a solid-state-reaction. The XRD analysis reveals that a composition-driven rhombohedral-to-cubic and a cubic-to-tetragonal phase-transition occur at x ≈ 0.4 and x ≈ 0.7, respectively. The experiments show that BaCaTiO{sub 3}-substitution suppresses the spiral spin-structure, which leads to net magnetization. The samples have been found to exhibit magnetic order for 0.1 ≤ x ≤ 0.7 and paramagnetic behavior for x ≥ 0.8. The electrical conductivity increases with increasing frequency of the applied electric field. The dielectric measurements suggest a non-Debye type relaxation. The samples show magneto-dielectric response (MD) upto x = 0.5, with the highest MD of 11.61% at 10 kHz for x = 0.3. The maximum attainable remanent polarization (P{sub r}) ∼ 5.24 μC/cm{sup 2} was observed for x = 0.7.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Crystal structure and magnetic properties of the solid-solution phase Ca{sub 3}Co{sub 2-v}Mn{sub v}O{sub 6}

The homogeneity range of the Ca{sub 3}Co{sub 2-v}Mn{sub v}O{sub 6} solid-solution phase covers the entire composition interval from v=0 to 1. A systematic powder X-ray and neutron diffraction, magnetic susceptibility, and magnetization study has been carried out to investigate effects of the Mn-for-Co substitution on structural and magnetic properties. The Mn substitution concerns primarily only the octahedral Co1 site of the Ca{sub 3}Co1Co2O{sub 6} crystal structure, whereas the trigonal-prismatic Co2 site structurally is left essentially unaffected. The Ca{sub 3}Co{sub 2-v}Mn{sub v}O{sub 6} crystal structure belongs to space group R3-barc with unit-cell dimensions (in hexagonal setting) 9.084{<=}a{<=}9.134 A and 10.448{<=}c{<=}10.583 A. A cut through the magnetic phase diagram at 10 K shows a ferrimagnetic domain for 0{<=}v<{approx}0.3 and an antiferromagnetic domain for {approx}0.50<v<{approx}1. The magnetic ordering temperatures are quite low (<{approx}25/18 K), and even so further magnetic transitions appear to take place at still lower temperature. The legitimity and reliability of the different indicators used to establish the magnetic transitions, their individual accuracy, and mutual consistency are briefly discussed. Variable parameters of the crystal and magnetic structures of Ca{sub 3}Co1{sub 1-v}Mn{sub v}Co2O{sub 6} are determined and their variation with v is briefly discussed in relation to chemical bonding. The magnetic structure in the ferrimagnetic region is essentially the same as that of the pristine v=0 phase, but since the moments at the Co2 site decrease and those at the (Co1,Mn) site increase with increasing v; characteristic traits of ferrimagnetism in magnetic susceptibility and magnetization gradually disappear. The magnetic arrangement in the antiferromagnetic region is characterized by differently sized moments at the (Co1,Mn) and Co2 sites, moments at adjacent sites in each of these sublattices being oppositely oriented along [001]. - Graphical abstract: Diagonal cut through the rhombohedral crystal structure of Ca{sub 3}Co{sub 2-v}Mn{sub v}O{sub 6} (crystallographic formula, Ca{sub 3}Co1{sub 1-v}Mn{sub v}Co2O{sub 6}) with emphasis on its characteristic one-dimensional columnar traits. Magnetic moments on the transition metal sites order parallel to [001] below {approx}25/18 K. For 0{<=}v<{approx}0.3 the state is referred to as ferrimagnetic although this designation becomes increasingly approximative as v increases. For {approx}0.5<v<{approx}1 an antiferromagnetic state is adopted in which the magnetic moments on both magnetic sublattices order antiferromagnetically.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic behavior of the Bi{sub 2−y}Sr{sub y}Ir{sub 2}O{sub 7} pyrochlore solid solution

The temperature dependence of magnetic susceptibility of the Bi{sub 2−y}Sr{sub y}Ir{sub 2}O{sub 7} system was studied from 2 to 300 K. According to these measurements, the solid solution (0≤y≤0.9) does not show any magnetic transition; however, a noticeable deviation from the Curie–Weiss law occurs and the magnetic behavior of this system can be ascribed to short-range magnetic order that is also present in several geometrically frustrated systems. The Pauli magnetic susceptibility decreases as the Sr content increases, this can be associated with a shift towards Ir{sup 5+} in samples; also the Ir effective magnetic moment decreases. The estimated Wilson-ratio indicates the presence of strong electron–electron correlations. - Graphical abstract: Temperature dependence of the magnetic susceptibility of Bi{sub 2−y}Sr{sub y}Ir{sub 2}O{sub 7}. The samples of this system showed no magnetic transition down to 2 K. Analyzing magnetic data (symbols for experimental data, continuous line for the Curie–Weiss (CW) equation and black dots for a modified CW equation), it is found that this system departures from a CW-like equation and the magnetic parameters C and θ notably deviate from the expected values for Ir. Better fittings with a modified CW equation are shown in the A and B insets. Highlights: ► The magnetic susceptibility of the Bi{sub 2−x}Sr{sub x}Ir{sub 2}O{sub 7} system is discussed. ► No magnetic transition is observed. ► Magnetic measurements on the Bi{sub 2−y}Sr{sub y}Ir{sub 2}O{sub 7} indicate the existence of Ir{sup 5+}. ► The magnetic susceptibility does not follow a Curie–Weiss law. ► A modified Curie–Weiss equation describes correctly the magnetic susceptibility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Transferable predictions of energetic and structural properties for refractory solid solution alloys across chemical compositions

We present a data-efficient approach to train graph neural networks (GNNs) on density functional theory (DFT) data for accurate and transferable predictions of energetic and structural properties of refractory solid solution alloys in the niobium-tantalum-vanadium (Nb-Ta-V) chemical space. We start by training the GNN model only on DFT data that describes refractory binary alloys niobium-tantalum (Nb-Ta), niobium-vanadium (Nb-V), and tantalum-vanadium (Ta-V) to predict formation enthalpy and root mean squared displacement. Once trained, the GNN predictions are tested on DFT data describing refractory ternary alloys Nb-Ta-V. While, unsurprisingly, direct transferability from binary to ternary is not sufficiently accurate, augmenting the training with only 1% of the available ternary data (uniformly distributed across the entire range of chemical compositions) improves significantly the quality of the GNN predictions. For comparison, we assess the transferability in the opposite direction by training GNN models on ternary Nb-Ta-V data and making predictions on binaries Nb-Ta, Nb-V, and Ta-V, which exhibits notably higher predictive errors. The proposed methodology, which favors transferability from lower-component to higher-component alloys, offers an efficient path towards avoiding the curse of dimensionality incurred when collecting DFT data for discovery and design of multi-component disordered alloys.

Density functional theory calculations↗

X-ray diffraction study of gold nitride films: Observation of a solid solution phase

The structure of nitride containing gold films produced by reactive ion sputtering and nitrogen plasma etching is investigated using x-ray photoelectron spectroscopy and x-ray diffraction. It is found that gold nitride is a solid solution of nitrogen atoms dissolved in a fcc gold matrix. Differences between the strain and lattice parameters of gold and gold nitride films were observed and are explained by interstitial nitrogen present in the latter.

36 MATERIALS SCIENCE↗

First-principles study of the solid solution of hydrogen in lanthanum

Results from first-principles investigations of the energetical, structural, electronic, and vibrational properties of model structures probing the metal-rich region of the lanthanum-hydrogen system, i.e., the region of the solid solution of hydrogen in lanthanum, are presented. We have studied the site preference and the ordering tendency of hydrogen atoms interstitially bonded in close-packed lanthanum. Spatially separated hydrogen atoms have turned out to exhibit an energetical preference for the occupation of octahedral interstitial sites at low temperature. Indications for a reversal of the site preference in favor of the occupation of tetrahedral interstitial sites at elevated temperature have been found. Linear arrangements consisting of pairs of octahedrally and/or tetrahedrally coordinated hydrogen atoms collinearly bonded to a central lanthanum atom have turned out to be energetically favorable structure elements. Further stabilization is achieved if such hydrogen pairs are in turn linked together so that extended chains of La-H bonds are formed. Pair formation and chain linking counteract the energetical preference for octahedral coordination observed for separated hydrogen atoms.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermophysical properties of Ni-containing single-phase concentrated solid solution alloys

For this research temperature dependent thermophysical properties, including specific heat capacity, lattice thermal expansion, thermal diffusivity and conductivity, have been systematically studied in Ni and eight Ni-containing single-phase face-centered-cubic concentrated solid solution alloys, at elevated temperatures up to 1273 K. The alloys have similar specific heat values of 0.4–0.5 J·g -1 ·K -1 at room temperature, but their temperature dependence varies greatly due to Curie and K-state transitions. The lattice, electronic, and magnetic contributions to the specific heat have been separated based on first-principles methods in NiCo, NiFe, Ni-20Cr and NiCoFeCr. The alloys have similar thermal expansion behavior, with the exception that NiFe and NiCoFe have much lower thermal expansion coefficient in their ferromagnetic state due to magnetostriction effects. Calculations based on the quasi-harmonic approximation accurately predict the temperature dependent lattice parameter of NiCo and NiFe with < 0.2% error, but underestimated that of Ni-20Cr by 1%, compared to the values determined from neutron diffraction. In addition, all the alloys containing Cr have very similar thermal conductivity, which is much lower than that of Ni and the alloys without Cr, due to the large magnetic disorder.

36 MATERIALS SCIENCE↗

Magnetic properties of quadruple perovskite solid solutions Ca{sub 1–x}Y{sub x}Cu{sub 3}Fe{sub 4}O{sub 12} and Y{sub 1–y}Ce{sub x}Cu{sub 3}Fe{sub 4}O{sub 12}

Magnetic properties of the quadruple perovskite solid solutions Ca{sub 1–x}Y{sub x}Cu{sub 3}Fe{sub 4}O{sub 12} and Y{sub 1–y}Ce{sub y}Cu{sub 3}Fe{sub 4}O{sub 12} are investigated. Ca{sub 1–x}Y{sub x}Cu{sub 3}Fe{sub 4}O{sub 12} shows continuous increase in the ferromagnetic transition temperature as x increases. Y{sub 1–y}Ce{sub y}Cu{sub 3}Fe{sub 4}O{sub 12} exhibits a ferromagnetic-antiferromagnetic transition in the vicinity of y = 0.5. These observations demonstrate the electron doping effect on magnetic properties of charge-disproportionated ACu{sub 3}Fe{sub 4}O{sub 12} phases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal activation mechanisms and Labusch-type strengthening analysis for a family of high-entropy and equiatomic solid-solution alloys

To understand the underlying strengthening mechanisms, thermal activation processes are investigated from stress-strain measurements with varying temperatures and strain rates for a family of equiatomic quinary, quaternary, ternary, and binary, face-center-cubic-structured, single phase solid-solution alloys, which are all subsystems of the FeNiCoCrMn high-entropy alloy. Our analysis suggests that the Labusch-type solution strengthening mechanism, rather than the lattice friction (or lattice resistance), governs the deformation behavior in equiatomic alloys. First, upon excluding the Hall-Petch effects, the activation volumes for these alloys are found to range from 10 to 1000 times the cubic power of Burgers vector, which are much larger than that required for kink pairs (i.e., the thermal activation process for the lattice resistance mechanism in body-center-cubic-structured metals). Second, the Labusch-type analysis for an N-element alloy is conducted by treating M-elements (M < N) as an effective medium and summing the strengthening contributions from the rest of N-M elements as individual solute species. For all equiatomic alloys investigated, a qualitative agreement exists between the measured strengthening effect and the Labusch strengthening factor from arbitrary M to N elements based on the lattice and modulus mismatches. Furthermore, the Labusch strengthening factor provides a practical critique to understand and design such compositionally complex but structurally simple alloys.

36 MATERIALS SCIENCE↗

From suppressed void growth to significant void swelling in NiCoFeCr complex concentrated solid-solution alloy

Void swelling can result in dimensional instability and undermine the safe operation of nuclear reactors. Current strategies to inhibit void swelling mainly focus on enhancing defect absorption and recombination by introducing high-density defect sinks. Complex concentrated solid-solution alloys (CSAs), including high-entropy alloys, can withstand severe radiation damage due to their inherent chemical complexity without interfaces. However, the underlying mechanisms for void suppression in CSAs are far from clear. In this research, we studied the void evolution with respect to irradiation depths, doses, and temperatures in equiatomic NiCoFeCr under 3 MeV Ni ion irradiations. At relatively low doses (16 and 54 displacements per atom, dpa), voids form mainly outside of the ion-damaged region, and void formation in the peak damage region is suppressed, leading to negligible swelling. However, with further increase of dose (86 up to 250 dpa), significant void growth occurs in the peak damage region and extended dislocation lines dominate instead of short dislocation lines and loops formed at lower doses. From 500 to 700 °C, the dislocation density decreases while dislocations grow. Although the overall void swelling increases dramatically from 500 to 580 °C at 54 dpa, void growth in the peak damage region is still suppressed. The transition from suppressed void growth to significant void swelling is attributed to dislocation evolution and local chemical inhomogeneity (enrichment of Fe/Cr in the matrix) at higher doses. Our study shows that controlling element diffusion and defect evolution through tuning chemical complexity can further enhance the swelling resistance of CSAs.

36 MATERIALS SCIENCE↗

MAS NMR Study of the Metastable Solid Solutions Found in the LiFePO4/FePO4 System

Li and 3IP NMR experiments were conducted on a series of single- or two-phase samples in the LiFePCvFePCM system with different overall lithium contents, and containing the two end-members and/or two metastable solid solution hases, Lio.6FeP04 or Lio.34FeP04. These experiments were carried out at different temperatures in order to search for vacancy/charge ordering and ion/electron mobility in the metastable phases. Evidence for Li+-Fe2+ interactions was bserved for both Lio.6FeP04 and Lio.34FePC>4. The strength of this interaction leads to the formation of LiFePCvlike clusters in the latter, as shown by the room temperature data. Different motional processes are proposed to exist as the temperature is increased and various scenarios are discussed. While concerted lithium-electron hopping and/or correlations explains the data below 125C, evidence for some uncorrelated motion is found at higher temperatures, together with the onset of phase mixing.

25 ENERGY STORAGE↗