Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

An X-ray magnetic circular dichroism (XMCD) study of Fe ordering in a synthetic MgAl2O4 – Fe3O4 (spinel – magnetite) solid solution series; implications for magnetic properties and cation site ordering

Fe L2,3-edge XAS and XMCD studies have been used to unravel structural trends in the MgAl2O4–Fe3O4, solid solution where thermodynamic modelling has represented a challenge due to the complex ordering arrangements of the end-members. Partitioning of Fe3+ and Fe2+ between tetrahedral (Td) and octahedral (Oh) sites has been established. In the most Fe-rich samples, despite rapid quenching from a disordered state, Fe2+Td is not present which matches the ordered, inverse spinel nature of end-member magnetite (Mgt) at room-T. However, in intermediate compositions Al and Mg substantially replace Fe and small amounts of Fe2+Td are found, stabilized or trapped by decreasing occurrence of the continuous nearest neighbour Fe – Fe interactions which facilitate charge redistribution by electron transfer. Furthermore, in the composition range ~Mgt0.4-0.9, XAS and XMCD bonding and site occupancy data suggest that nano-scale, magnetite-like Fe clusters are present. By contrast, at the spinel-rich end of the series, Mgt0.17 and Mgt0.23 have a homogeneous long-range distribution of Fe, Mg and Al. These relationships are consistent with the intermediate and Fe-rich samples falling within a wide solvus in this system such that the Fe-clusters occur as proto-nuclei for phases which would exsolve following development of long-range crystalline order during slow cooling. Calculated saturation magnetic moments (Ms) for the Fe-rich samples show excellent agreement with measured values but for the most Mg-rich samples are displaced to slightly higher values; this displacement is due to the presence of abundant Mg and Al disrupting the anti-parallel alignment of electron spins for Fe atoms.

Henderson, C. Michael B.↗
DOE OSTI2014

Micromechanical Behavior of Solid-Solution-Strengthened Mg-1wt.%Al Alloy Investigated by In-Situ Neutron Diffraction

In-situ neutron-diffraction experiments were employed to investigate the micromechanical behavior of solid-solution-strengthened Mg-1wt.%Al alloy. Two starting textures were used: 1) as-extruded then solutionized texture, T1, in which the basal poles of most grains are tilted around 70~85 from the extrusion axis, and 2) a reoriented texture, T2, in which the basal poles of most grains are tilted around 10~20 from the extrusion axis. Lattice strains and diffraction peak intensity variations were measured in situ during loading-unloading cycles in uniaxial tension. Twinning activities and stress states for various grain orientations were revealed. The results show that the soft grain orientations, favorably oriented for either extension twinning or basal slip, exhibit the stress relaxation, resulting in the compressive residual strain after unloading. On the other hand, the hard grain orientations, unfavorably oriented for both extension twinning and basal slip, carry more applied load, leading to much higher lattice strains during loading followed by tensile residual strains upon unloading.

Lee, Sooyeol↗
NASA NTRS1980

The 3-5 semiconductor solid solution single crystal growth

Techniques used for liquid and vapor phase epitaxy of gallium indium arsenide are described and the difficulties encountered are examined. Results show that the growth of bulk III-V solid solution single crystals in a low gravity environment will not have a major technological impact. The float zone technique in a low gravity environment is demonstrated using cadmium telluride. It is shown that this approach can result in the synthesis of a class of semiconductors that can not be grown in normal gravity because of growth problems rooted in the nature of their phase diagrams.

Gertner, E. R.↗
NASA NTRS1965

Brazing method produces solid-solution bond between refractory metals

Brazing two refractory metals by diffusion bonding minimizes distortion and avoids excessive grain growth in the metals. This method requires the selection of an interface metal that forms intermediate low-melting eutectics or solid solutions with the metals to be brazed.

Source record↗
DOE OSTI2019

Hidden Mn magnetic-moment disorder and its influence on the physical properties of medium-entropy NiCoMn solid solution alloys

In this work, the ab initio Korringa-Kohn-Rostoker method combined with the coherent potential approximation (CPA) was employed to investigate the electronic, magnetic, and transport properties of medium-entropy face-centered-cubic (fcc) NiCoMn solid solution alloys. By comparing the CPA electronic structure with that from supercell calculations, we uncovered an unconventional CPA ground state, which correctly distinguishes two equally populated Mn CPA components—with large spin moments but opposite orientations. Using the spin spiral calculations, we further demonstrated that this ground state is most energetically favorable in the presence of spin noncollinearity, and no significant longitudinal spin fluctuation is observed, justifying the applicability of the Heisenberg model. The finite-temperature magnetism was further studied using different approximations based on the Heisenberg model, and we found the Mn moments to be fully disordered at low temperature due to a small net effective Weiss field on Mn. In addition, the magnetic effect on the electron scattering at finite temperatures was evaluated and compared with other scattering mechanisms. Since the magnetization-induced electron scattering is almost saturated in the ground state, (full) spin disorder only yields a small addition to the resistivity, whereas the thermal displacements increase it modestly. Finally, we elucidate the role of hydrostatic pressure on the magnetic and transport properties. In conclusion, these findings reflect the importance of the magnetic signatures on the physical properties of alloys, and they provide a window into magnetism-controlled electronic structure and energy dissipation.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Stable Co-valorization of Carbon Dioxide and Methane via Dynamic Reconstruction of a Metal Oxide Solid Solution Catalyst

Dry reforming of methane (DRM) is a process that converts two greenhouse gases (methane and carbon dioxide) into syngas, a mixture of H 2 and CO, that can lead to a variety of value-added chemicals. Owing to its endothermic nature, high reaction temperatures up to 800 °C are typically required and the grand challenge lies in developing robust catalysts without sintering and coking-induced deactivation during the long-term on-stream operation. Towards this aim, herein, a robust complex oxide-supported NiCu alloy catalyst was generated in situ during DRM. By leveraging the configurational stability of a solid oxide solution precursor, tightly anchored NiCu bimetallic nanoparticles were in situ exsoluted and acted as the active sites in DRM. The as-afforded catalyst exhibited stable performance for DRM due to the ability to repel coke off the surface as the reaction proceeds. Kinetic experiments along with top surface characterization detail the reconstruction behavior of the solid oxide solution under DRM reaction conditions. In conclusion, the fundamental insights from this work provide guidance on generating resistant and flexible catalysts via in situ active sites formation from easily synthesized metal oxide solid solutions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2019

Atomistic simulation of defect-dislocation interactions in concentrated solid-solution alloys

The interaction between point defects and dislocations plays a crucial role in governing material properties and microstructural evolutions under external stimuli, such as mechanical deformation and irradiation. Here, we present an atomistic study of the interactions between point defects and dislocations in concentrated solid-solution alloys (CSAs). Using molecular statics and kinetic Monte Carlo methods, we demonstrate that the strain energy and stress field distribution induced by a dislocation in CSAs are highly inhomogeneous along the dislocation line, which leads to heterogeneity of defect-dislocation interactions. Specifically, the interactions are spatially different and screened by the random arrangement of different elemental species. Furthermore, such localization of defect-dislocation interaction indicates that the “dislocation-bias” mechanism that is a driving force for radiation-induced void swelling can be suppressed in concentrated alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2017

SIMS Bias on Isotope Ratios in Ca-Mg-Fe Carbonates (Part III): δ 18 O and δ 13 C Matrix Effects Along the Magnesite-Siderite Solid-Solution Series

This study explores the effects of cation composition on mass bias (i.e., the matrix effect), which is a major component of instrumental mass fractionation (IMF) in the microanalyses of δ 13 C and δ 18 O by SIMS in carbonates of the magnesite–siderite solid-solution series (MgCO 3 –FeCO 3 ). A suite of twelve calibration reference materials (RMs) was developed and documented (calibrated range: Fe# = 0.002–0.997, where Fe# = molar Fe/[Mg + Fe]), along with empirical expressions for regressing calibration data (affording residuals < 0.5‰ relative to certified reference material NIST-19). The calibration curves of both isotope systems are non-linear and have, over a 2-year period, fallen into one of two distinct but largely self-consistent shape categories (data from ten measurement sessions), despite adherence to well-established analytical protocols for carbonate δ 13 C and δ 18 O analyses at WiscSIMS (CAMECA IMS 1280). Mass bias was consistently most sensitive to changes in composition near the magnesite end-member (Fe# 0–0.2), deviating by up to 4.5‰ (δ 13 C) and 14‰ (δ 18 O) with increasing Fe content. The cause of variability in calibration curve shapes is not well understood at present and demonstrates the importance of having available a sufficient number of well-characterised RMs so that potential complexities of curvature can be adequately delineated and accounted for on a session-by-session basis.

58 GEOSCIENCES↗
DOE OSTI2021

A critical dislocation velocity for serration mechanism transition in a nickel-chromium solid solution alloy

Here, the influence of strain rate across three orders of magnitude (1.70 × 10 –5 /s to 1.43 × 10 –2 /s) along with the effect of the plastic strain accumulation (up to 10%) on the serrated plastic flow were investigated in the nickel-chromium (Ni-Cr) solid solution alloy Nimonic 75 by performing constant-strain-rate tension testing at 600 °C. As the strain rate decreased, the critical strain for the onset of serrations transitioned from normal behavior to inverse behavior. The serrated flow was characterized as Type A+B serration at high strain rate (1.43 × 10 –2 /s). In the intermediate strain-rate regime (1.43 × 10 –3 /s and 1.45 × 10 –4 /s), Type B serrations were observed and followed by a transformation to Type C+B serrations. At the low strain rate (1.70 × 10 –5 /s), the plastic flow immediately displayed Type C serrations, which later evolved into Type C+B serrations. Regardless of the strain rate, plastic strain, or dislocation density, a critical dislocation velocity falling in the range of 1.2 × 10 –6 – 2.2 × 10 –6 m/s was identified to signify the onset of Type C serration, whereby the mobile dislocations break free from the solute cloud for short bursts of deformation. Finally, a novel model by solute rearrangement across dislocation cores was used to understand how the critical dislocation velocity is quantitatively determined by the rate at which solute atoms are able to hop across the glide plane as a partial dislocation core moves through the lattice.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Deformation Behavior of Solid-Solution-Strengthened Mg-9wt%Al Alloy: In-Situ Neutron Diffraction and Elastic-Viscoplastic Self-Consistent Modeling

In situ neutron diffraction and elastic viscoplastic self-consistent (EVPSC) modeling have been employed to understand the deformation mechanisms of the loading unloading process under uniaxial tension in a solid-solution-strengthened extruded Mg 9 wt.% Al alloy. The initial texture measured by neutron diffraction shows that the {00.2} basal planes in most grains are tilted around 20 30 from the extrusion axis, indicating that basal slip should be easily activated in a majority of grains under tension. Non-linear stress strain responses are observed during unloading and reloading after the material is fully plastically deformed under tension. In situ neutron diffraction measurements have also demonstrated the non-linear behavior of lattice strains during unloading and reloading, revealing that load redistribution continuously occurs between soft and hard grain orientations. The predicted macroscopic stress strain curve and the lattice strain evolution by the EVPSC model are in good agreement with the experimental data. The EVPSC model provides the relative activities of the available slip and twinning modes, as well as the elastic and plastic strains of the various grain families. It is suggested that the non-linear phenomena in the macroscopic stress strain responses and microscopic lattice strains during unloading and reloading are due to plastic deformation by the operation of basal a slip in the soft grain orientations (e.g. {10.1}, {11.2} and {10.2} grain families).

Lee, Sooyeol↗
DOE OSTI2022

Deformation mechanisms in single crystal Ni-based concentrated solid solution alloys by nanoindentation

Nanoindentation is a critical technique to probe mechanical properties at the micrometer and sub-micrometer scales, accompanied by challenges from indentation size effect, pile-up/sink-in effect, and strain rate sensitivity. In this work, different nanoindentation techniques have been employed to explore Ni-based concentrated solid solution alloys (CSAs) with the addition of 3d transition metal elements including Co, Cr, Mn, and Fe, including unique single-crystal Ni, NiCo, NiFe, Ni 80 Cr 20 , and NiCoFeCr samples with (100) surfaces. A procedure of nanoindentation tests and data analysis/correction have been developed, and a data set of hardness, elastic modulus, strain rate sensitivity, and activation volume for Ni-based CSAs are provided, including the less explored binary alloys such as Ni 80 Cr 20 and Ni 80 Mn 20 . The results show that the type of alloying elements is more critical than the number of elements in strengthening: Co does not provide strengthening in NiCo, while Cr, Mn, and Fe are effective strengthening elements. Cr is the most effective among all the 3d transition metal elements. Furthermore, atomic-level lattice distortion is responsible for the strengthening and the role of stacking fault energy is insignificant in Ni-based CSAs at room temperature. In summary, nanoindentation shows increasing promise as a reliable and fast tool to provide comprehensive mechanical information for new alloy design and development.

36 MATERIALS SCIENCE↗
NASA NTRS1999

Quantitative Computer Tomography for Determining Composition of Microgravity and Ground Based Solid Solutions

Advances in x-ray Computer Tomography (CT) have been led by the medical profession, and by evaluation of industrial products, particularly castings. Porosity can readily be determined as a function of the density of a material, and CT is thus an industrially important NDE tool. Providing high purity, 100% dense standards of pure elements and compounds can be fabricated, the composition of solid solution alloys can be determined by measuring the CT number, which is a function of the absorption of the sample. Average densities across slices 1 mm thick can generally be determined to better than 1 percent. With present technology this spatial sensitivity is less than ideal, but important benefits can nevertheless be obtained by using CT, particularly single crystals, prior to making any destructive assault upon the sample. The sample can in fact be examined prior to removal from the mold within which it has been grown and, in the cases of microgravity flight samples, before removal from the cartridge assembly. This greatly assists the researcher in the characterization of the products, particularly as a guide to cutting and sampling. Examples of work with germanium-silicon alloys and mercury cadmium telluride taken with a radioactive cobalt source will be demonstrated.

Gillies, D. C.↗
DOE OSTI2019

Structural and magnetic properties of the CeCo 5 –CeZn 5 solid solution and potential improvements upon iron substitution

In an effort to create high-performance permanent magnets with reduced critical rare earth content, we explored the CeCo 5-x T x (T = transition metal or metalloid) family of compounds to investigate the effect of substitution on the material’s magnetic properties. In our exploration of the CeCo 5-x Zn x system, we discovered a continuous solid solution at 900 °C between the CeCo 5 and CeZn 5 binary phases with ferromagnetism existing from the CeCo 5 compound to the intermediate CeCo 2.75 Zn 2.25 compound. Single crystal studies were also conducted revealing a relatively large anisotropy field of 11.5 T at 300 K for Ce 0.96 Ta 0.04 Co 4.35 Zn 0.65 . Here, the addition of iron Ce 0.79 Ta 0.07 Co 3.77 Fe 0.89 Zn 0.47 yielded further increases in Curie temperature and saturation magnetization to 800 K and 85.5 emu/g, respectively.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Selective Metal Exsolution in BaFe 2-y My(PO 4 ) 2 (M = Co 2+ , Ni 2+ ) Solid Solutions

The 2D-Ising ferromagnetic phase BaFe 2+ 2 (PO 4 ) 2 shows exsolution of up to one-third of its iron content (giving BaFe 3+ 1.33 (PO 4 ) 2 ) under mild oxidation conditions, leading to nanosized Fe 2 O 3 exsolved clusters. Here we have prepared BaFe 2–y My(PO 4 ) 2 (M = Co 2+ , Ni 2+ ; y = 0, 0.5, 1, 1.5) solid solutions to investigate the feasibility and selectivity of metal exsolution in these mixed metallic systems. For all the compounds, after 600 °C thermal treatment in air, a complete oxidation of Fe 2+ to Fe 3+ leaves stable M 2+ ions, as verified by 57 Fe Mössbauer spectroscopy, TGA, TEM, microprobe, and XANES. Furthermore, the size of the nanometric α-Fe 2 O 3 clusters coating the main phase strongly depends on the y M metal concentration. For M-rich phases the iron diffusion is hampered so that a significant fraction of superparamagnetic α-Fe2O3 particles (100% for BaFe 0.5–x Co 1.5 (PO 4 ) 2 ) was detected even at 78 K. Although Ni 2+ and Co 2+ ions tend to block Fe diffusion, the crystal structure of BaFe 0.67 Co 1 (PO 4 ) 2 demonstrates a fully ordered rearrangement of Fe 3+ and Co 2+ ions after Fe exsolution. We found that the magnetic behaviors of the Fe-depleted materials are mostly dominated by antiferromagnetic exchange, while Co 2+ -rich compounds show metamagnetic transitions reminiscent of the BaCo 2 (PO 4 ) 2 soft helicoidal magnet.

Alcover, Ignacio Blazquez↗
DOE OSTI2017

Atomic-level structural correlations across the morphotropic phase boundary of a ferroelectric solid solution: xBiMg 1/2 Ti 1/2 O 3 -(1$-$x)PbTiO 3

Revelation of unequivocal structural information at the atomic level for complex systems is uniquely important for deeper and generic understanding of the structure property connections and a key challenge in materials science. Here in this paper we report an experimental study of the local structure by applying total elastic scattering and Raman scattering analyses to an important non-relaxor ferroelectric solid solution exhibiting the so-called composition-induced morphotropic phase boundary (MPB), where concomitant enhancement of physical properties have been detected. The powerful combination of static and dynamic structural probes enabled us to derive direct correspondence between the atomic-level structural correlations and reported properties. The atomic pair distribution functions obtained from the neutron total scattering experiments were analysed through big-box atom-modelling implementing reverse Monte Carlo method, from which distributions of magnitudes and directions of off-centred cationic displacements were extracted. We found that an enhanced randomness of the displacement-directions for all ferroelectrically active cations combined with a strong dynamical coupling between the A- and B-site cations of the perovskite structure, can explain the abrupt amplification of piezoelectric response of the system near MPB. Finally, altogether this provides a more fundamental basis in inferring structure-property connections in similar systems including important implications in designing novel and bespoke materials.

36 MATERIALS SCIENCE↗
NASA NTRS2017

The Evolution of the Deformation Substructure in a Ni-Co-Cr Equiatomic Solid Solution Alloy

The equiatomic NiCoCr alloy exhibits an excellent combination of strength and ductility, even greater than the FeNiCrCoMn high entropy alloy, and also displays a simultaneous increase in strength and ductility with decreasing the testing temperature. To systemically investigate the origin of the exceptional properties of NiCoCr alloy, which are related to the evolution of the deformation substructure with strain, interrupted tensile testing was conducted on the equiatomic NiCoCr single-phase solid solution alloy at both cryogenic and room temperatures at five different plastic strain levels of 1.5%, 6.5%, 29%, 50% and 70%. The evolution of deformation substructure was examined using electron backscatter diffraction (EBSD), transmission Kikuchi diffraction (TKD), conventional transmission electron microscopy (CTEM), diffraction contrast imaging using STEM (DCI-STEM) and atomic resolution scanning transmission electron microscopy. While the deformation substructure mainly consisted of planar dislocation slip and the dissociation of dislocations into stacking faults at small strain levels (≤6.5%), at larger strain levels, additional substructures including nanotwins and a new phase with hexagonal close packed (HCP) lamellae also appeared. The volume fraction of the HCP lamellae increases with increasing deformation, especially at cryogenic temperature. First principles calculations at 0 K indicate that the HCP phase is indeed energetically favorable relative to FCC for this composition. The effects of the nanotwin and HCP lamellar structures on hardening rate and ductility at both cryogenic and room temperature are qualitatively discussed.

Twinning↗