Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solar coronal loops”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Comparative study of x ray and microwave emissions during solar flares

The work supported by the grant consisted of two projects. The first project involved making detailed case studies of two flares using SMM data in conjunction with ground based observations. The first flare occurred at 1454 UT on June 20, 1989 and involved the eruption of a prominence near the limb. In the study we used data from many wavelength regimes including the radio, H-alpha, hard X-rays, and soft X-rays. We used a full gyrosynchrotron code to model the apparent presence of a 1.4 GHz source early in the flare that was in the form of a large coronal loop. The model results lead us to conclude that the initial acceleration occurs in small, dense loops which also produced the flare's hard X-ray emission. We also found evidence that a source at 1.4 GHz later in the event was due to second harmonic plasma emission. This source was adjacent to a leg of the prominence and comes from a dense column of material in the magnetic structure supporting the prominence. Finally, we investigated a source of microwaves and soft X-rays, occurring approximately 10 min after the hard X-ray peak, and calculate a lower limit for the density of the source. The second flare that was studied occurred at 2156 UT on June 20, 1989 and was observed with the VLA and the Owens Valley Radio Observatory (OVRO) Frequency Agile Array. We have developed a gyrosynchrotron model of the sources at flare peak using a new gyrosynchrotron approximation which is valid at very low harmonics of the gyrofrequency. We found that the accelerated particle densities of the sources decreased much more with radius from the source center than had been supposed in previous work, while the magnetic field varied less. We also used the available data to analyze a highly polarized source which appeared late in the flare. The second project involved compiling a statistical base for the relative timing of the hard X-ray peak, the turbulent and blue-shift velocities inferred from soft X-ray line emissions observed by SMM and the microwave peak as determined from ground-based observations. This timing was then used to aid the testing of newly developed global models for flares that incorporate the global magnetic topology as well as the electron dynamics that are responsible for the hard X-rays and microwaves.

Winglee, Robert M.↗
DOE OSTI2026

Energy Evolution from the Chromosphere to the Heliosphere in the 2021 October 28 Solar Eruption

We perform a detailed study of the energetics for a well-observed solar eruption and flare that occurred on 2021 October 28. This event included a GOES class X1.0 flare, a global extreme-UV (EUV) wave, and a coronal mass ejection (CME) that reached speeds of >2000 km s −1 . The event was observed from a variety of spacecraft in NASA’s Heliophysics System Observatory, including multiple missions near Earth, STEREO-A off the Sun-Earth line, and Solar Orbiter, near the Sun-Earth line at about 0.8 au. Using remote sensing, in situ observations, and in some cases scaling laws based on previous observations, we characterize the following quantities: free magnetic energy, energy in nonthermal electrons, energy in nonthermal ions, bolometric energy, energy deposited in the chromosphere, thermal energy radiated in the flare loops, energy dissipated by the EUV wave, CME kinetic and gravitational potential energy, CME energy flux in the heliosphere, and the energy partition in the CME shock. We find that the total energy released during the event is consistent with estimates of the pre-event stored magnetic energy, and the CME kinetic + potential energy dominates the energy partition.

solar coronal mass ejection shocks↗
NASA NTRS1999

Rendering Three-Dimensional Solar Coronal Structures of Active Region 8227

Coronal X-ray and EUV synthesized images are constructed of Active Region 8227 (May-June 1996) and are compared with Yohkoh/SXT, SOHO/EIT, and TRACE observations. Using the rendering technique of Gary (1997) and Alexander, Gary, and Thompson (1998), specific geometric and physical models are used to integrated the plasma emission along the line of sight to obtain a rendered image. The specific instrumental profiles are convolved in the integration process as well as specific heating functions. We analyze coronal X-ray and EUV structures by constructing synthesized image and comparison with observations provide test of specific physical models. We investigate how different pressure distributions within the active region loop system affect the emission characteristics and compare the various results with coronal observations. We investigate how the different heating functions in the active region are reflected in the effect of overall structure of the region. Specific heating rates are tested.

Gary, G. A.↗
DOE OSTI2025

Ion Acceleration in Fermi-LAT Behind-the-Limb Solar Flares: The Role of Coronal Shock Waves

Here, we investigate the relationship between the gamma-ray emission measured with Fermi-LAT and radio signatures of coronal shock waves in four behind-the-limb (BTL) solar flares. All events were associated with metric type II radio burst. Both start and end times of the radio bursts were synchronized with the gamma-ray emission. The type II bursts associated with the BTL gamma-ray flares had higher speeds and lower formation heights than those of an average sample. These findings support the notion that the highly relativistic ions that produce the gamma-rays in BTL flares are accelerated at CME-driven propagating coronal shock waves rather than in large-scale coronal loops.

Corona↗
NASA NTRS1983

A white-light /Fe X/H-alpha coronal transient observation to 10 solar radii

Multitelescope observations of the coronal transient of April 15-16, 1980 provide simultaneous data from the Solar Maximum Mission Coronagraph/Polarimeter, the Solwind Coronagraph, and the new Emission line Coronagraph of the Sacramento Peak Observatory. An eruptive prominence-associated white light transient is for the first time seen as an unusual wave or brightening in Fe X 6374 A (but not in Fe XIV 5303 A). Several interpretations of this fleeting enhancement are offered. The prominence shows a slowly increasing acceleration which peaks at the time of the Fe event. The white light loop transient surrounding the prominence expands at a well-documented constant speed to solar radii, with an extrapolated start time at zero height coincident with the surface activity. This loop transient exemplifies those seen above 1.7 solar radii, in that leading the disturbance is a bright N(e)-enhanced) loop rather than a dark one. This is consistent with a report of the behavior of another eruptive event observed by Fisher and Poland (1981) which began as a density depletion in the lower corona, with a bright loop forming at greater altitudes. The top of the bright loop ultimately fades in the outer corona while slow radial growth continues in the legs.

Wagner, W. J.↗
NASA NTRS1987

ISEE 3 observations of low-energy proton bidirectional events and their relation to isolated interplanetary magnetic structures

The paper represents the results of a comprehensive survey of low-energy proton bidirectional anisotropies and associated transient magnetic structures as observed in the 35-1600 keV energy range on ISEE-3 during the last solar maximum. The majority of observed bidirectional flow (BDF) events (more than 70 percent) are associated with isolated magnetic structures which are postulated to be an interplanetary manifestation of coronal mass ejection (CME) events. The observed BDF events can be qualitatively grouped into five classes depending on the field signature of the related magnetic structure and the association (or lack of association) with an interplanetary shock. Concerning the topology of the CME-related magnetic structures, the observations are interpreted as being consistent with a detached bubble, comprising closed loops or tightly wound helices.

Marsden, R. G.↗
NASA NTRS1985

Thermal stability of static coronal loops: Part 1: Effects of boundary conditions

The linear stability of static coronal-loop models undergoing thermal perturbations was investigated. The effect of conditions at the loop base on the stability properties of the models was considered in detail. The question of appropriate boundary conditions at the loop base was considered and it was concluded that the most physical assumptions are that the temperature and density (or pressure) perturbations vanish there. However, if the base is taken to be sufficiently deep in the chromosphere, either several chromospheric scale heights or several coronal loop lengths in depth, then the effect of the boundary conditions on loop stability becomes negligible so that all physically acceptable conditions are equally appropriate. For example, one could as well assume that the velocity vanishes at the base. The growth rates and eigenmodes of static models in which gravity is neglected and in which the coronal heating is a relatively simple function, either constant per-unit mass or per-unit volume were calculated. It was found that all such models are unstable with a growth rate of the order of the coronal cooling time. The physical implications of these results for the solar corona and transition region are discussed.

Antiochos, S. K.↗
NASA NTRS1985

Thermal stability of static coronal loops. I - Effects of boundary conditions

The linear stability of static coronal-loop models undergoing thermal perturbations was investigated. The effect of conditions at the loop base on the stability properties of the models was considered in detail. The question of appropriate boundary conditions at the loop base was considered and it was concluded that the most physical assumptions are that the temperature and density (or pressure) perturbations vanish there. However, if the base is taken to be sufficiently deep in the chromosphere, either several chromospheric scale heights or several coronal loop lengths in depth, then the effect of the boundary conditions on loop stability becomes negligible so that all physically acceptable conditions are equally appropriate. For example, one could as well assume that the velocity vanishes at the base. The growth rates and eigenmodes of static models in which gravity is neglected and in which the coronal heating is a relatively simple function, either constant per-unit mass or per-unit volume were calculated. It was found that all such models are unstable with a growth rate of the order of the coronal cooling time. The physical implications of these results for the solar corona and transition region are discussed.

Antiochos, S. K.↗
NASA NTRS1987

On the hard X-ray spatial structure during the impulsive phase of solar flares

A simplified form of the bremsstrahlung cross-section is used to obtain an analytic expression for the intensity of electron-beam-produced hard X-ray emission with depth in solar flares which can be used in a first-order analysis of imaging data. The results indicate that the conditions for the appearance of bright footpoint emission, in terms of loop parameters such as density and length, are much less restrictive than previously suggested. The analysis shows that the observed footpoint structure of many flares in hard X-rays is consistent with the thick-target bombardment model, and that the intensity of the footpoint emission relative to the spatially integrated flux can be used as a diagnostic tool of coronal column density.

Emslie, A. Gordon↗
NASA NTRS1987

Magnetic reconnection and solar flare loops

Reconnection models of the main phase of large solar flares are used to explain the energetics and the motions of the large flare loops that occur during this phase. Correct predictions for the density and temperature of the X-ray emitting loops are obtained by coupling magnetic reconnection with chromospheric ablation. In the reconnection models the ablation is driven by the thermal conduction of heat along magnetic field lines connecting the reconnection shocks in the corona with the flare ribbons in the chromosphere. Combining the compressible reconnection theory of Soward and Priest (1982) with the magnetohydrodynamic (MHD) subshock criteria of Coroniti (1970) shows that the Petschek-type slow-mode shocks in the vicinity of the x-line always dissociate into pairs of isothermal slow-mode subshocks and thermal conduction fronts. The rate of expansion of the loops is a function of the reconnection rate, and loops can be evolving self-similarly in time with their height increasing as sq root t and the reconnection rate decreasing as t to the minus 1.

Forbes, T. G.↗
NASA NTRS2001

Material Outflows from Coronal Intensity "Dimming Regions" During Coronal Mass Ejection Onset

One signature of expulsion of coronal mass ejections (CMEs) from the solar corona is the appearance of transient intensity dimmings in coronal images. These dimmings have generally been assumed to be due to discharge of CME material from the corona, and thus the "dimming regions" are thought of as an important signature of the sources of CMEs. We present spectral observations of two dimming regions at the time of expulsion of CMEs, using the Coronal Diagnostic Spectrometer (CDS) on the SOHO satellite. One of the dimming regions is at the solar limb and associated with a CME traveling in the plane of the sky, while the other region is on the solar disk and associated with an Earth-directed "halo" CME. From the limb event, we see Doppler signatures of approximately equal to 30 kilometers per second in coronal (Fe XVI and Mg Ix) emission lines, where the enhanced velocities coincide with the locations of coronal dimming. This provides direct evidence that the dimmings are associated with outflowing material. We also see larger (approximately equal to 100 kilometers per second). Doppler velocities in transition region (0 v and He I) emission lines, which are likely to be associated with motions of a prominence and loops at transition region temperatures. An "EIT wave" accompanies the disk event, and a dimming region behind the wave shows strong blue-shifted Doppler signatures of approximately equal to 100 kilometers per second in 0 v, suggesting that material from the dimming regions behind the wave may be feeding the CME.

Harra, Louise K.↗
NASA NTRS1980

HEAO 1 observations of active coronae in main-sequence and subgiant stars

The HEAO 1 data has been searched for evidence of X-ray emission from 105 bright late-type stars of luminosity classes IV and V, selected on the basis of indirect optical evidence of the presence of a hot corona. Six of the target stars were detected at the 3-standard deviation level and 15 were coincident with 2-standard deviation X-ray sources. On a statistical basis no more than 5 of these 21 sources are spurious, and the probability that the identification with the class of active chromosphere stars is spurious is less than 0.00001. The sources lie near a line of X-ray/bolometric luminosity ratio = 0.0001, similar to a solar plage, and it is concluded that the most active coronae of late-type stars which are not members of close binary systems are being observed. The RS CVn systems discovered to date seem to form a distinct class of coronal X-ray sources, but the lowest X-ray luminosity members of the group, of which Capella may be the prototype, appear to overlap the domain of these single stars with active coronae. The data do not fit the coronal model of Gorenstein and Tucker (1976), but they are consistent with the coronal loop model of Rosner et al. (1978) as extended by Walter et al. (1980).

Walter, F. M.↗
NASA NTRS1983

The correlation of coronal mass ejections with energetic flare proton events

Proton events of energies of at least 4 MeV presumed due to solar flares are compared with coronal mass ejections (CMEs) observed with an orbiting coronagraph. H alpha flares are associated with 27 of the 50 flare proton events of the study. Each of these 27 flares is then associated temporally and spatially with a CME, confirming the earlier conclusion, based on Skylab data, that a CME may be a necessary condition for a flare proton event. Peak 4-22 MeV proton fluxes correlate with both the speeds and the angular sizes of the associated CMEs. CMEs of larger angular sizes are more likely to be loops or fans rather than jets or spikes and are more likely to intersect the ecliptic.

Kahler, S. W.↗
NASA NTRSDate not supplied

Nanoflare Heating Frequency of an X-ray Bright Point Observed by MaGIXS

Nanoflares have been considered to be one of the most likely candidates for heating the solar corona to multi-million kelvin temperatures. Individual nanoflares are difficult to detect with today's instruments, but their presence may be established by comparing simulated nanoflare-heated plasma emissions to observed emissions. We present a simulation of emission from an X-ray Bright Point (XBP) detected by the MaGIXS, as well as simultaneous observations from SDO/AIA and Hinode/XRT. To simulate the XBP loops, we utilize the HYDRAD code. The length and magnetic field strength of these loops are determined using potential field extrapolation of SDO/HMI's observed photospheric magnetogram. Each loop is considered to be heated by random nanoflares, the amplitude and frequency of which are governed by the length of the loop and the strength of the magnetic field. The simulated outputs are used to estimate the intensity of spectrally pure maps of Fe-18, Fe-17, Ne-9, O-8, O-9, Ne-9, and so on, which is then compared to the intensity determined from MaGIXS observations. In addition, we derived the intensity maps obtained by AIA and XRT and compared them to the observed data. The composite distribution of the delay time of the nanoflares for which the simulated loops morphology and intensities match with observation shows a peak at 200s-500s, indicating that most of the nanoflares have a high/intermediate frequency.

coronal heating↗
NASA NTRS1980

The preflare state

The accumulation, storage and irreversible release of the free energy necessary for a solar flare are discussed on the basis of data obtained from the Apollo Telescope Mount on Skylab and other pertinent sources. Skylab and OSO 7 observations of possible flare precursors and flare evolution are presented, and the evolution of the flare of Sept. 5, 1973, the most completely observed flare of the Skylab program, is described in detail, with account given to magnetic structures and H alpha radiation. Theories of the preflare state are then reviewed, with attention given to the force-free fields and coronal arcades, thermal and magnetic structures and the MHD stability of coronal loops.

Van Hoven, G.↗
NASA NTRS1997

Study of the Source Regions of Coronal Mass Ejections Using Yohkoh SXT Data

The scientific objective of the program was to better understand how CMEs (Coronal Mass Ejections) are initiated at the sun by examining structures on the disk which are related to the origins of CMEs. CMEs represent important disruptions of large-scale structures of closed magnetic fields in the corona, and result in significant disturbances of the interplanetary medium and near-Earth space. The program pertained to NASA's objectives of understanding the physics of solar activity and the structured and evolution of the corona, and the results are being applied to understanding CMEs currently being observed by SOHO near the sun and by WIND and Ulysses in the heliosphere. Three general areas of research were pursued in the program. One was to use Yohkoh soft X-ray telescope (SXT) images of eruptive events visible against the solar disk to examine the coronal structures and the boundaries of the large-scale magnetic fields considered to be involved in coronal mass ejections (CMEs). The second area involved a survey and study of SXT X-ray arcade events which exhibit dimming, or the possible depletion of coronal material above and possibly before onset of the bright long-duration event (LDE). Finally, we studied the SXT data during periods when white light CMEs were observed the HAO Mauna Loa K-coronameter and, conversely, we examined the white light data during periods when expanding X-ray loops were observed at the limb.

Webb, David F.↗
NASA NTRS1998

The Magnetic Roots of Enhanced Coronal Heating

Building a description of the sites of enhanced heating in the solar atmosphere has been a primary interest of the solar group at MSFC. For locations within and between active regions, as well as in the quiet Sun, this work shows that extended magnetic structures are heated from active compact magnetic structures at their feet. This talk will review what we have learned about the magnetic characteristics of these active footpoint sites, and the relationships of the intensity variations in the low-lying and higher structures, in the context of current theories and observations of magnetic reconnection and jets. One puzzling result is the poor correlation of intensity variations in the low and high loops.

Porter, J. G.↗
NASA NTRS2005

Current Sheet Evolution in the Aftermath of a CME Event

We report on SOHO-UVCS observations of the coronal restructuring following a Coronal Mass Ejection (CME) on November 26,2002, at the time of a SOHO-Ulysses quadrature campaign. Starting about 3 hours after a CME in the NW quadrant, UVCS began taking spectra at 1.7 solar radius, covering emission from both cool and hot plasma. Observations continued, with occasional gaps, for more than 2 days. Emission in the 974.8 Angstrom line of [Fe XVIII], indicating temperatures above 6 x 10(exp 6) K, was observed throughout the campaign in a spatially limited location. Comparison with EIT images shows the Fe XVIII emission to overlie a growing post-flare loop system formed in the aftermath of the CME. The emission most likely originates in a current sheet overlying the arcade. Analysis of the [Fe XVIII] emission allows us to infer the evolution of physical parameters in the current sheet over the entire span of our observations: in particular, we give the temperature vs. time in the current sheet and estimate the density. At the time of the quadrature, Ulysses was directly above the location of the CME and intercepted the ejecta. High ionization state Fe was detected by Ulysses-SWICS throughout the magnetic cloud associated with the CME. Both the remote and in situ observations are compared with predictions of theoretical CME models.

Bemporad, A.↗