Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “silicone materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Topology-enhanced mechanical stability of swelling nanoporous electrodes

Abstract Materials like silicon and germanium offer a 10-fold improvement in charge capacity over conventional graphite anodes in lithium-ion batteries but experience a roughly threefold volume increase during lithiation, which challenges ensuring battery integrity. Nanoporous silicon, created by liquid-metal-dealloying, is a potentially attractive anode design to mitigate this challenge, exhibiting both higher capacity and extended cycle lifetimes. However, how nanoporous structures accommodate the large volume change is unknown. Here, we address this question by using phase-field modeling to produce nanoporous particles and to investigate their elastoplastic swelling behavior and fracture. Our simulations show that enhanced mechanical stability results from the network topology consisting of ligaments connected by bulbous, sphere-like nodes. The ligaments forcefully resist elongation while the nodes, behaving like isolated spherical particles, experience large stresses driving fracture. However, being smaller compared to a sphere of the same volume as the entire nanoporous particle, the nodes are more protected against fracture.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Crack-Free Silicon Monoxide as Anodes for Lithium-Ion Batteries

The volume expansion of Si and SiO particles was investigated using a single-particle battery assembled with a focused ion beam and scanning electron microscopy (FIB-SEM) system. Single Si and SiO particles were galvanostatically charged and discharged as in real batteries. Microstructural changes of the particles were monitored in situ using FIB-SEM from two different angles. The results revealed that the volume expansion of micrometer size particle SiO was not only much smaller than that of Si, but it also kept its original shape with no sign of cracks. Additionally, this isotropic mechanical property of a SiO particle can be attributed to its microstructure: nanosized Si domains mixed with SiO 2 domains. The nanosized Si domains can mitigate the anisotropic swelling caused by the orientation-dependent lithium-ion insertion; the surrounding SiO 2 domains can act as a buffer to further constrain the localized anisotropic swelling.

25 ENERGY STORAGE↗
DOE OSTI2025

Architecture-Dependent Thin Film Self-Assembly of Star Polystyrene-poly(2-vinylpyridine) Block Copolymers

Controlling the orientation of nanostructured block copolymer (BCP) thin films is essential for their use in templating, transport, and pattern transfer. Conventional efforts mainly focus on adjusting enthalpic interactions between the blocks and interfaces, while entropic contributions are often overlooked. Here, we show that the morphology of BCP thin films can be precisely tuned by the architectural design of star BCPs. Specifically, we synthesized multiarm star BCPs with a polystyrene (PS) core and poly(2-vinylpyridine) (P2VP) corona, which exhibits a lamellar microdomain morphology. The entropic penalty associated with a parallel orientation of the microdomains to the substrate is controlled by varying the number of arms comprising the star BCPs, from 2-arms (triblock) to 3-arms and 4-arms. We systematically investigated the thin film morphology at different depths using grazing incidence small-angle X-ray and neutron scattering (GISAXS and GISANS), atomic force microscopy (AFM), water contact angle (WCA), and interference microscopy. The results show that 2-arm star BCPs show a parallel orientation, the 3-arm star BCPs form a uniform PS film at the air surface with a vertical orientation of the microdomains underneath, and the 4-arm star BCPs exhibit a parallel microdomain orientation at the air surface with mixed parallel and perpendicular microdomain orientation in the bulk. Additionally, we found that the inclination angle of microdomains at the edges of islands and holes, resulting from the incommensurability between film thickness and the characteristic period of the microdomain morphology, increases with a higher number of arms. This suggests a greater grain boundary tilt angle in the microdomains of star-shaped block copolymers (BCPs). When silicon substrates were modified with PS homopolymer, the selective interaction between substrate and core blocks promotes a parallel orientation for the 4-arm star BCPs. In conclusion, this work shows that control of arm number in star BCPs affords diverse BCP thin film morphologies, offering insights into the star BCP conformations in thin films across different depths.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Low Resistance Contact to P-Type Monolayer WSe 2

Advanced microelectronics in the future may require semiconducting channel materials beyond silicon. Two-dimensional (2D) semiconductors, with their atomically thin thickness, hold great promise for future electronic devices. One challenge to achieving high-performance 2D semiconductor field effect transistors (FET) is the high contact resistance at the metal-semiconductor interface. Here, in this study, we develop a charge-transfer doping strategy with WSe 2 /α-RuCl 3 heterostructures to achieve low-resistance ohmic contact for p-type monolayer WSe2 transistors. We show that hole doping as high as 3 × 10 13 cm -2 can be achieved in the WSe 2 /α-RuCl 3 heterostructure due to its type-III band alignment, resulting in an ohmic contact with resistance of 4 kΩ μm. Based on that, we demonstrate p-type WSe 2 transistors with an on-current of 35 μA·μm -1 and an I ON /I OFF ratio exceeding 10 9 at room temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Impact of temperature variations on BISON predictions of Ag release in AGR-1 and AGR-2 experiments

Understanding and quantifying the release of fission products like silver (Ag) from TRistructural ISOtropic (TRISO) fuel particles is important to assess the safe operation of advanced high temperature reactors. Although the silicon carbide (SiC) layer of TRISO particles is effective as the main fission product barrier, Ag can be released from intact TRISO particles. A mechanistic model for the effective Ag diffusivity, D eff , was previously developed as a function of temperature and microstructure variables informed by atomistic modeling of Ag diffusivity on the mesoscale. Here in this study, we use this model to explore how experimental temperature uncertainties impact the overall predicted Ag release. This analysis shows that temperature uncertainties have a significant impact on the overall Ag release predictions. Furthermore, we show that the time average volume average temperature (TAVA) temperature is not an appropriate proxy for temperature histories to predict fission product release. We attribute this to the Arrhenius dependence of Ag diffusivity with respect to temperature. The detailed temperature histories, therefore, provide the most accurate results are are of most importance for modeling efforts. Overall, this work shows the importance of considering the experimental uncertainty of the temperature on computational predictions of fission product transport and release and the need for more accurate temperature histories from future experiments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS2001

Upper Temperature Limit of Environmental Barrier Coatings for Enabling Propulsion Materials Established

Silicon-based ceramics, such as SiC/SiC composites and Si3N4, are the prime candidates for hot section structural components of next-generation gas turbines. A key barrier to such an application is the rapid recession of silicon-based ceramics in combustion environments because of the volatilization of silica scale by water vapor (refs. 1 and 2). Environmental barrier coatings (EBC's) were developed to prevent recession in the High Speed Research--Enabling Propulsion Materials (HSR-EPM) Program (refs. 3 and 4). An investigation under the Ultra-Efficient Engine Technology Program was undertaken at the NASA Glenn Research Center to establish the upper temperature limit of the EPM EBC.

Lee, Kang N.↗
NASA NTRS2001

Atomically Flat Surfaces Developed for Improved Semiconductor Devices

New wide bandgap semiconductor materials are being developed to meet the diverse high temperature, -power, and -frequency demands of the aerospace industry. Two of the most promising emerging materials are silicon carbide (SiC) for high-temperature and high power applications and gallium nitride (GaN) for high-frequency and optical (blue-light-emitting diodes and lasers) applications. This past year Glenn scientists implemented a NASA-patented crystal growth process for producing arrays of device-size mesas whose tops are atomically flat (i.e., step-free). It is expected that these mesas can be used for fabricating SiC and GaN devices with major improvements in performance and lifetime. The promising new SiC and GaN devices are fabricated in thin-crystal films (known as epi films) that are grown on commercial single-crystal SiC wafers. At this time, no commercial GaN wafers exist. Crystal defects, known as screw defects and micropipes, that are present in the commercial SiC wafers propagate into the epi films and degrade the performance and lifetime of subsequently fabricated devices. The new technology isolates the screw defects in a small percentage of small device-size mesas on the surface of commercial SiC wafers. This enables atomically flat surfaces to be grown on the remaining defect-free mesas. We believe that the atomically flat mesas can also be used to grow GaN epi films with a much lower defect density than in the GaN epi films currently being grown. Much improved devices are expected from these improved low-defect epi films. Surface-sensitive SiC devices such as Schottky diodes and field effect transistors should benefit from atomically flat substrates. Also, we believe that the atomically flat SiC surface will be an ideal surface on which to fabricate nanoscale sensors and devices. The process for achieving atomically flat surfaces is illustrated. The surface steps present on the "as-received" commercial SiC wafer is also illustrated. because of the small tilt angle between the crystal "basal" plane and the polished wafer surface. These steps are used in normal SiC epi film growth in a process known as stepflow growth to produce material for device fabrication. In the new process, the first step is to etch an array of mesas on the SiC wafer top surface. Then, epi film growth is carried out in the step flow fashion until all steps have grown themselves out of existence on each defect-free mesa. If the size of the mesas is sufficiently small (about 0.1 by 0.1 mm), then only a small percentage of the mesas will contain an undesired screw defect. Mesas with screw defects supply steps during the growth process, allowing a rough surface with unwanted hillocks to form on the mesa. The improvement in SiC epi surface morphology achievable with the new technology is shown. An atomic force microscope image of a typical SiC commercial epilayer surface is also shown. A similar image of an SiC atomically flat epi surface grown in a Glenn laboratory is given. With the current screw defect density of commercial wafers (about 5000 defects/cm2), the yield of atomically free 0.1 by 0.l mm mesas is expected to be about 90 percent. This is large enough for many types of electronic and optical devices. The implementation of this new technology was recently published in Applied Physics Letters. This work was initially carried out in-house under a Director's Discretionary Fund project and is currently being further developed under the Information Technology Base Program.

Powell, J. Anthony↗
NASA NTRS2024

Analyses of the MISSE 9-15 Polymers and Composites Experiment 1-4 (PCE 1-4) Contamination Samples

Spacecraft in low Earth orbit (LEO) are subjected to harsh environmental conditions, including radiation (cosmic rays, ultraviolet (UV), x-ray and charged particle radiation), micrometeoroids and orbital debris, temperature extremes, thermal cycling, and atomic oxygen (AO). These environmental exposures can result in erosion, embrittlement and optical property degradation of susceptible materials threatening spacecraft performance and durability. To increase our understanding of environmental effects such as AO erosion and radiation induced embrittlement of spacecraft materials, NASA Glenn Research Center developed a series of experiments that were flown as part of the Materials International Space Station Experiment (MISSE) missions on the exterior of the International Space Station (ISS). Recently, four Glenn experiments with 365 flight samples were flown on ISS’s MISSE-Flight Facility (MISSE-FF). These experiments are the Polymers and Composites Experiment-1 (PCE-1) flown as part of the MISSE-9 mission, the PCE-2 flown as part of the MISSE-10 mission, the PCE-3 flown as part of the MISSE-12 and MISSE-15 missions, and the PCE-4 flown as part of the MISSE-13 mission. Each of these experiments included passive contamination witness samples in each flight direction for post-flight molecular contamination analyses. A total of 13 contamination flight samples were flown. The post-flight analyses of the PCE 1-4 contamination samples include X-ray Photoelectron Spectroscopy (XPS) analyses (surface and ion sputter depth analyses) and optical properties (total reflectance, total transmittance and solar absorptance). This paper provides results of post-flight analyses of the PCE 1-4 contamination samples and their corresponding control samples. Knowledge of on-orbit contamination is important for the PCE 1-4 flight data interpretation.

Atomic Oxygen↗
DOE OSTI2021

In Situ Synthesis of Graphene-Coated Silicon Monoxide Anodes from Coa-Derived Humic Acid for High-Performance Lithium-Ion Batteries

Silicon monoxide (SiO) is attaining extensive interest amongst silicon-based materials due to its high capacity and long cycle life; however, its low intrinsic electrical conductivity and poor coulombic efficiency strictly limit its commercial applications. Here low-cost coal-derived humic acid (HA) is used as a feedstock to synthesize in-situ graphene-coated disproportionated SiO (D-SiO@G) anode with a facile method. HRTEM and XRD confirm the well-coated graphene layers on an SiO surface. Scanning Transmission X-ray Microscopy (STXM) and X-ray Absorption Near-Edge Structure (XANES) spectra analysis indicate that the graphene coating effectively hinders the side-reactions between the electrolyte and SiO particles . As a result, the D-SiO@G anode presents an initial discharge capacity of 1937.6 mAh g -1 at 0.1 A g -1 and an initial coulombic efficiency (ICE) of 78.2%. High reversible capacity (1023 mAh g -1 at 2.0 A g -1 ), excellent cycling performance ( 72.4% capacity retention after 500 cycles at 2.0 A g -1 ), and rate capability (774 mAh g -1 at 5 A g -1 ) results are substantial. Full coin cells assembled with LiFePO 4 electrodes and D-SiO@G electrodes display impressive rate performance. These results indicate a promising potential for practical use in high-performance lithium-ion batteries.

25 ENERGY STORAGE↗
NASA NTRS1978

Development and Evaluation of Die Materials for Use in the Growth of Silicon Ribbons by the Inverted Ribbon Growth Process. Task 2: LSSA Project

Several ribbon growth experiments were performed from V-shaped dies coated with CVD Si3N4. The most significant result was the ability to perform five consecutive growth runs from the same die without mechanical degradation of the die through temperature cycling. The die was made from vitreous carbon coated with CVD Si3N4. Silicon oxynitride, Si2N2O, was examined with respect to thermal stability in contact with molten silicon. The results of X-ray analysis indicate that this material is converted to both alpha - and beta-Si3N4 in the presence of molten silicon. Experiments on the stability of CVD SiOxNy shoe that this material can be maintained in contact with molten silicon (sessile drop test) for greater than 30 h at 1450 C without total decompositon. These layers are converted mainly to beta-Si3N4.

Duffy, M. T.↗
DOE OSTI2021

Indirectly Detected DNP-Enhanced 17 O NMR Spectroscopy: Observation of Non-Protonated Near-Surface Oxygen at Naturally Abundant Silica and Silica-Alumina

Recent studies have shown that dynamic nuclear polarization (DNP) can be used to detect 17 O solid-state NMR spectra of naturally abundant samples within a reasonable experimental time. Observations using indirect DNP, which relies on 1 H mediation in transferring electron hyperpolarization to 17 O, are currently limited mostly to hydroxyls. Direct DNP schemes can hyperpolarize non-protonated oxygen near the radicals; however, they generally offer much lower signal enhancements. In this study, we demonstrate the detection of signals from non-protonated 17 O in materials containing silicon. The sensitivity boost that made the experiment possible originates from three sources: indirect DNP excitation of 29 Si via protons, indirect detection of 17 O through 29 Si nuclei using two-dimensional 29 Si{ 17 O} D-HMQC, and Carr-Purcell-Meiboom-Gill refocusing of 29 Si magnetization during acquisition. This 29 Si-detected scheme enabled, for the first time, 2D 17 O– 29 Si heteronuclear correlation spectroscopy in mesoporous silica and silica-alumina surfaces at natural abundance. In contrast to the silanols showing motion-averaged 17 O signals, the framework oxygens exhibit unperturbed powder patterns as unambiguous fingerprints of surface sites. Furthermore, along with hydroxyl oxygens, detection of these moieties will help in gaining more atomistic-scale insights into surface chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Cs X Si 15 P 21 ( X = Sn or Pb): Polar Noncentrosymmetric Si–P Frameworks Stabilized by Covalent X –P Bonding

Metal silicon phosphides composed of earth-abundant Si and P tend to exhibit semiconducting properties and adopt diverse crystal structures with relatively small additions of structure-directing elements. The potential of silicon phosphide materials in nonlinear optical applications has been hindered by the inability to systematically produce noncentrosymmetric structures with such a flexible framework. Here, in this work, two isostructural compounds with a novel noncentrosymmetric structure were made possible by the inclusion of elements with stereochemically active lone pairs (Sn 2+ and Pb 2+ ). The structures were determined through single-crystal and synchrotron powder X-ray diffraction. Analysis of chemical bonding in real space through the electron localization function revealed stereochemically active Pb 2+ and Sn 2+ species in a trigonal pyramidal coordination with {Pb/Sn}–P bonds. Such covalent bonding between Pb and P is quite uncommon in extended solids and has been reported in a few rare instances. Band structure calculations and linear optical measurements confirm the semiconducting nature of Cs X Si 15 P 21 ( X = Sn or Pb). The synthesis was optimized to yield high-purity polycrystalline samples. The nonlinear optical properties show promising second-harmonic generation (SHG) coefficients from the Kurtz–Perry method. First-principles calculations of the nonlinear optical properties support the experimentally determined SHG values and provide moderate values of birefringence, suggesting Cs X Si 15 P 21 could be phase-matchable and practical nonlinear optical materials in the mid-IR region.

crystal structure↗
DOE OSTI2021

Modulating Interactions between Molten Polystyrene and Porous Solids Using Atomic Layer Deposition

Understanding and modulating the interactions between molten polymers and porous solids is important for numerous processes and phenomena including catalytic conversion of polymers and fabrication of nanocomposites and nanostructured materials. Although changing the surface composition of pores would enable modulation of interactions between polymer and nanoporous solids, it is challenging to achieve such a control without inducing significant changes to the size and structure of nanopores. In this work, we demonstrate that the interactions between molten polystyrene (PS) and disordered packings of SiO 2 nanoparticles (NPs) can be modulated by changing the surface composition of the NPs using atomic layer deposition (ALD). A disordered packing of silica NPs is modified with varying surface coverages of TiO 2 , WO 3 and CaCO 3 , with coverages estimated by the mass gain and the refractive index change of NP packings. Based on the time required to fully infiltrate these ALD-modified NP packings via capillarity, the contact angles for PS on different surfaces prepared via ALD are determined. The contact angle gradually changes from that of pure SiO 2 to that of the fully covered surfaces. The contact angles for PS on SiO 2 , TiO 2 , WO 3 and CaCO 3 are found to be 20°, 62°, 70° and 10°, respectively. Interestingly, the contact angles and interfacial energies between PS and the ALD-modified surfaces do not correlate strongly with the water contact angle of these surfaces; thus, caution must be exercised in predicting how a polymer would wet or interact with porous solids solely based on their hydrophilicity. Furthermore, the method presented in this work can be extended to study the interactions between a wide range of polymers and surfaces in porous media, which will have important implications for designing new catalytic materials for polymer upcycling reactions as well as novel NP-polymer composite films and membranes with enhanced mechanical and transport properties.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Direct-bonded diamond membranes for heterogeneous quantum and electronic technologies

Diamond has superlative material properties for a broad range of quantum and electronic technologies. However, heteroepitaxial growth of single crystal diamond remains limited, impeding integration and evolution of diamond-based technologies. Here, we directly bond single-crystal diamond membranes to a wide variety of materials including silicon, fused silica, sapphire, thermal oxide, and lithium niobate. Our bonding process combines customized membrane synthesis, transfer, and dry surface functionalization, allowing for minimal contamination while providing pathways for near unity yield and scalability. We generate bonded crystalline membranes with thickness as low as 10 nm, sub-nm interfacial regions, and nanometer-scale thickness variability over 200 by 200 μm 2 areas. We measure spin coherence times T 2 for nitrogen vacancy centers in 150 nm-thick bonded membranes of up to 623 ± 21 μs, suitable for advanced quantum applications. We demonstrate multiple methods for integrating high quality factor nanophotonic cavities with the diamond heterostructures, highlighting the platform versatility in quantum photonic applications. Furthermore, we show that our ultra-thin diamond membranes are compatible with total internal reflection fluorescence (TIRF) microscopy, which enables interfacing coherent diamond quantum sensors with living cells while rejecting unwanted background luminescence. The processes demonstrated herein provide a full toolkit to synthesize heterogeneous diamond-based hybrid systems for quantum and electronic technologies.

color center↗
DOE OSTI2025

A Standardized Analysis Process Using Digital Image Correlation to Calculate In Situ Cladding Strain from Modified Burst Tests for Fuel Performance Code Validation

Historical data collection on nuclear fuel cladding materials has focused on generating a statistically significant amount of data to assess the material and its failure behavior. Furthermore, data generated to support material model and failure criteria development were previously posttest evaluations, so a large number of tests was required to gain new understanding. A way to expedite this process is to develop techniques capable of generating large, high-fidelity data sets from a single test with lower uncertainty or quantified uncertainty. One such example of this approach is Oak Ridge National Laboratory’s use of modified burst tests (MBTs) to analyze the mechanical behavior and failure conditions of cladding during a simulated reactivity-initiated accident (RIA). Each test incorporates digital image correlation (DIC) analysis techniques that are used to assess the accumulated strain in situ, as well as eventual cladding failure. This work has been fruitful in defining strain-to-failure conditions for materials like silicon carbide (SiC) fiber–reinforced/SiC matrix composite tubes (SiC/SiC), iron-chromium-aluminum (FeCrAl) alloy tubes, and chromium-coated Zircaloy-4 tubes. However, there are numerous DIC software available, including open-source and proprietary software. The different DIC software use various algorithms to process images and calculate displacement values. Using these different software and algorithms can lead to varying results, and perhaps larger-than-expected uncertainties. In the present study, previously published MBT data encompassing a variety of test conditions were reanalyzed with two different DIC software to assess the variance in the calculated strain results. The data consisted of SiC/SiC, FeCrAl, and chromium-coated Zircaloy-4 tubes. Plots of the calculated strains during the transient revealed good agreement between the two DIC software. The average root-mean-square errors between the two software was 0.20% strain, which is slightly larger than a previously reported error value for these tests. In conclusion, this variance in results is low enough that this analysis method can be used for code validation.

Reactivity-initiated accident↗