Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “shock waves”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Shock wave oscillation driven by turbulent boundary layer fluctuations

Pressure fluctuations due to the interaction of a shock wave with a turbulent boundary layer were investigated. A simple model is proposed in which the shock wave is convected from its mean position by velocity fluctuations in the turbulent boundary layer. Displacement of the shock is assumed limited by a linear restoring mechanism. Predictions of peak root mean square pressure fluctuation and spectral density are in excellent agreement with available experimental data.

Plotkin, K. J.↗

Magnetospheric Response to the Arrival of the Shock Wave in Front of the Magnetic Cloud of January 10, 1997

We are Studying the magnetic cloud event of January 6 - 11, 1997. Specifically, we have investigated the response of the magnetosphere to the shock wave in front of the magnetic cloud on January 10, 1997 using data from WIND, GEOTAIL and POLAR spacecraft as well as ground magnetometer data. The WIND spacecraft, which was located as about 104 Re upstream from the Earth (85.1, -55.2, -22.1) Re(sub GSM), observed the arrival of the shock wave front at 0050 UT. Geotail was located at the equatorial magnetopause (approx. 8.7 Re, 10.7 MLT, -7.46 MLAT), while POLAR was located in the northern dawn sector above the auroral zone at 8.4 Re, 6.1 MLT and 61.1 MLAT. A magnetic signature was nearly simultaneously observed at about 0104 UT at the POLAR and Geotail spacecraft. The Geotail spacecraft entered from the magnetosphere into the magnetosheath. Particle density increases were observed on WIND and Geotail, but not on POLAR. Two instruments on the Polar spacecraft (TIDE and TIMAS) actually observed a slight reduction in energy, density and temperature. The UV aurora shows a dawnside intensification. The shock wave did not cause an auroral substorm and therefore was not geoeffective.

Wuest, M.↗

Ignition delay time and H 2 O measurements during methanol oxidation behind reflected shock waves

To improve detailed chemical kinetics models, the oxidation of methanol was investigated behind reflected shock waves in shock tubes. Ignition delay times of methanol–air mixtures, with Ar as diluent, were studied between 940 and 1540 K in a heated shock tube, for pressures up to 14.9 atm and for equivalence ratios of 0.5, 1.0, and 2.0. Water profiles were measured by utilizing a laser absorption technique in the 1350-to-1600-K temperature range, at an average pressure of 1.3 atm and for similar equivalence ratios. The present study shows here the ignition delay times of methanol to be in very good agreement with results from the literature (Fieweger et al., 1997), whereas the other conditions have never been investigated before. The ignition delay time data are also in good agreement with modern detailed kinetics mechanisms such as the AramcoMech 3.0 model. The water time-history profiles were modeled using well-known literature mechanisms. Discrepancies were observed between these kinetics mechanisms, and poor predictions were observed for the lower temperatures investigated. Sensitivity and rate-of-production analyses were performed using 3 literature mechanisms (namely, AramcoMech 3.0, Princeton, and JetSurfII). Discrepancies were found among the models when predicting important reactions dominating the oxidation of methanol as well as the rate-of-production of H 2 O.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Shock-wave reflexion in a relaxing gas

Plane normal shock wave reflection in relaxing gas for shock tube endwall upstream and downstream dynamic pressures, using method of characteristics

Hanson, R. K.↗

Refractive phenomena in the shock wave dispersion with variable gradients

In this article the refraction effects in the weak shock wave (SW) dispersion on an interface with a temperature variation between two mediums are described. In the case of a finite-gradient boundary, the effect of the SW dispersion is remarkably stronger than in the case of a step change in parameters. In the former case the vertical component of velocity for the transmitted SW (the refraction effect) must be taken into account. Results of comparative calculations based on the two-dimensional model corrected for the refraction effect show significant differences in the shapes of the dispersed SW fronts.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental Plans for Subsystems of a Shock Wave Driven Gas Core Reactor

This Contractor Report proposes a number of plans for experiments on subsystems of a shock wave driven pulsed magnetic induction gas core reactor (PMI-GCR, or PMD-GCR pulsed magnet driven gas core reactor). Computer models of shock generation and collision in a large-scale PMI-GCR shock tube have been performed. Based upon the simulation results a number of issues arose that can only be addressed adequately by capturing experimental data on high pressure (approx.1 atmosphere or greater) partial plasma shock wave effects in large bore shock tubes ( 10 cm radius). There are three main subsystems that are of immediate interest (for appraisal of the concept viability). These are (1) the shock generation in a high pressure gas using either a plasma thruster or pulsed high magnetic field, (2) collision of MHD or gas dynamic shocks, their interaction time, and collision pile-up region thickness, and (3) magnetic flux compression power generation (not included here).

Kazeminezhad, F.↗

Shock-wave-induced mixing enhancement in scramjet combustors

An experimental study of the interaction between a weak shock wave and a supersonic shear layer was carried out to determine the possibility of shock-induced mixing enhancement. A supersonic (Mach 2.5) stream of nitrogen was mixed with a sonic helium jet downstream of a rearward-facing step to simulate the mixing region in the vicinity of a SCRAMJET flameholder. A small wedge was used to generate an oblique shock wave that impinges on the mixing layer. Schlieren flow visualization and Rayleigh scattering concentration measurements were carried out. The results indicate that significant spreading of the shear layer may occur downstream of the shock/shear layer interaction region. Further study is required to determine the mechanism of the observed spreading and the extent of the increase in mixing efficiency. Since there are shock-induced losses, an optimum mixing enhancement configuration will have to be determined before the method can be validated and successfully implemented in a SCRAMJET combustor.

Menon, S.↗

The use of laser-induced shock wave plasma spectroscopy (LISPS) for examining physical characteristics of pharmaceutical products

An experimental study has been performed to examine the physical characteristics of pharmaceutical products, such as tablet, by employing an emission plasma induced by Nd-YAG laser at a low pressure of Helium gas. The hardness of tablet is one of the parameters that examined during the production process for standard quality of pharmaceutical products. In the Laser-Induced Shock Wave Plasma Spectroscopy (LISPS), the shock wave has a significant role in inducing atomic excitation. It was known that, the speed of the shock wavefront depends on the hardness of the sample, and it correlates with the ionization rate of the ablated atoms. The hardness of the tablet is examined using the intensity ratio between the ion of Mg (II) 275.2 nm and the neutral of Mg (I) 285.2 nm emission lines detected from the laser-induced plasma. It was observed that the ratio changes with respect to the change in the tablet hardness, namely the ratio is higher for the hard tablet. Besides the ratio measurements, we also measured the depth profile of a tablet by focusing 60 shots of irradiation of laser light at a fixed position on the surface of the tablet. It was found that the depth profile varies differently with the hardness of the tablet. These experiment results show that the technique of LISPS can be applied to examine the quality of pharmaceutical products.

36 MATERIALS SCIENCE↗

Initiating solar system formation through stellar shock waves

Isotopic anomalies in presolar grains and other meteoritical components require nucleosynthesis in stellar interiors, condensation into dust grains in stellar envelopes, transport of the grains through the interstellar medium by stellar outflows, and finally injection of the grains into the presolar nebula. The proximity of the presolar cloud to these energetic stellar events suggests that a shock wave from a stellar outflow might have initiated the collapse of an otherwise stable presolar cloud. We have begun to study the interactions of stellar shock waves with thermally supported, dense molecular cloud cores, using a three spatial dimension (3D) radiative hydrodynamics code. Supernova shock waves have been shown by others to destroy quiescent clouds, so we are trying to determine if the much smaller shock speeds found in, e.g., asymptotic giant branch (AGB) star winds, are strong enough to initiate collapse in an otherwise stable, rotating, solar-mass cloud core, without leading to destruction of the cloud.

Boss, A. P.↗

Interaction of an Optical Discharge with a Shock Wave

The results of an experimental study of the impact of the focused pulsed-periodic radiation from a CO{sub 2} laser on a gas-dynamic structure in a supersonic jet are presented. The radiation of the CO{sub 2} laser is propagated across the stream and focused by a lens on the axis of the supersonic jet. To register the flow structure, a shadow scheme with a slit and a flat knife located along the flow is used. The image is fixed by a speed camera with an exposure time of 1.5 μs and a frame rate of 1000 1/s. In the flow, the plasma initiated by the pulsedperiodic laser is visualized in order to identify and determine the period of plasma development, as well as the motion of the initial front of the shock wave. It is shown that at the transverse input of laser radiation into the stream the periodic structure of the thermal trace is created with the formation of an unsteady shock wave from the energy release zone. At small repetition rates of laser radiation pulses, the thermal spot interacts with the flow in the pulsed mode. It is shown that elliptic nonstationary shock waves are formed only at low subsonic flow velocities and in a stationary atmosphere. The process of nonstationary ignition by an optical discharge of a methane–air mixture during a subsonic outflow into a motionless atmosphere is shown experimentally. The results of optical visualization indicate burning in the trace behind the optical discharge region.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Preparation and mechanism of nanometer Al{sub 5}O{sub 6}N via shock wave plasma technique

Cubic Al{sub 5}O{sub 6}N nanocrystals were successfully synthesized via a novel strategy called shock wave plasma technique, using trinitrotoluene (TNT) and aluminum powder as raw materials and water as protection medium. The precursor including carbon and Al{sub 5}O{sub 6}N was engendered firstly during the detonation of compound dynamite, and then the pure Al{sub 5}O{sub 6}N nanoparticles were obtained when the carbon was removed through calcining at high temperature. The precursor and the final as-synthesized Al{sub 5}O{sub 6}N powder were characterized by X-ray diffraction (XRD), Raman spectrum and high-resolution transmission electron microscope (HRTEM), respectively. The calcining temperature schedule of the precursor was decided through DTA/TG analysis. The results indicate that the precursor consists of 37.7% carbon and 62.3 deg. C Al{sub 5}O{sub 6}N. After calcining at 600 deg. C for 1 h, the average diameter of the as-synthesized Al{sub 5}O{sub 6}N nanocrystal is 30-40 nm and the morphology micrograph takes on uniform spherical shape. The lattice parameters are consistent completely with the standard cubic Al{sub 5}O{sub 6}N (JCPDS 48-0686). The well-dispersed Al{sub 5}O{sub 6}N nanocrystals synthesized by shock wave plasma technique can be attributed to the covering of carbon and fast cooling of water medium. A possible reaction mechanism was also proposed preliminarily based on the experimental results.

36 MATERIALS SCIENCE↗

Experimental Database with Baseline CFD Solutions: 2-D and Axisymmetric Hypersonic Shock-Wave/Turbulent-Boundary-Layer Interactions

A database compilation of hypersonic shock-wave/turbulent boundary layer experiments is provided. The experiments selected for the database are either 2D or axisymmetric, and include both compression corner and impinging type SWTBL interactions. The strength of the interactions range from attached to incipient separation to fully separated flows. The experiments were chosen based on criterion to ensure quality of the datasets, to be relevant to NASA's missions and to be useful for validation and uncertainty assessment of CFD Navier-Stokes predictive methods, both now and in the future. An emphasis on datasets selected was on surface pressures and surface heating throughout the interaction, but include some wall shear stress distributions and flowfield profiles. Included, for selected cases, are example CFD grids and setup information, along with surface pressure and wall heating results from simulations using current NASA real-gas Navier-Stokes codes by which future CFD investigators can compare and evaluate physics modeling improvements and validation and uncertainty assessments of future CFD code developments. The experimental database is presented tabulated in the Appendices describing each experiment. The database is also provided in computer-readable ASCII files located on a companion DVD.

Database↗

Fluid-Thermal-Structural Interactions in Ramp-Induced Shock-Wave Boundary-Layer Interactions at Mach 6

Shock-wave boundary-layer interactions (SWBLI) pose unique challenges for the slender airframes and sharp control surfaces characteristic of high-speed airbreathing aircraft. Spikes in pressure and thermal loading have been shown to occur in SWBLI regions; thus, predicting their location and behavior proves critical for assuring aircraft structural integrity and fatigue resilience. SWBLIs frequently lead to severe turbulent boundary-layer separation and corresponding unsteady motions characterized by a wide range of frequencies. Low-frequency motion has been shown to couple with the structure of a compliant panel, and turbulent boundary layers thus present a particular danger for thin control surfaces. Previous studies have shown that the thermal loading on a compliant panel in a ramp-induced SWBLI may have a signi cant impact on the panel vibrations. A multitude of studies has investigated the heating on rigid structures, but a charactrization of the heating effects on compliant structures is necessary to fully understand the fluid-thermal-structural interactions (FTSI) occurring in ramp-induced SWBLIs. This studuses infrared thermography and high-frequency Kulite pressure transducers to examine the heating loads on rigid and compliant ramps at various angles and flow conditions at Mach 6.

Hypersonic↗