Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “shape approximation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

The radar cross section of dielectric disks

A solution is presented for the backscatter (monostatic) radar cross section of dielectric disks of arbitrary shape, thickness, and dielectric constant. The result is obtained by employing a Kirchhoff-type approximation to obtain the fields inside the disk. The internal fields induce polarization and conduction currents from which the scattered fields and the radar cross section can be computed. The solution for the radar cross section obtained in this manner will be shown to agree with known results in the special cases of normal incidence, thin disks, and perfect conductivity. It will also be shown that the solution can be written as a product of the reflection coefficient of an identically oriented slab times the physical optics solution for the backscatter cross section of a perfectly conducting disk of the same shape. This result follows directly from the Kirchhoff-type approximation without additional assumptions.

Radar cross section↗
NASA NTRS2016

Point Spread Function of ASTRO-H Soft X-Ray Telescope (SXT)

ASTRO-H (Hitomi) satellite equips two Soft X-ray Telescopes (SXTs), one of which (SXT-S) is coupled to Soft-X-ray Spectrometer (SXS) while the other (SXT-I) is coupled to Soft X-ray Imager (SXI). Although SXTs are lightweight of approximately 42 kgmodule1 and have large on-axis effective area (EA) of approximately 450 cm(exp 2) at 4.5 keV module(sub 1) by themselves, their angular resolutions are moderate approximately 1.2 arcmin in half power diameter. The amount of contamination into the SXS FOV (3.05 times 3.05 arcmin(exp 2) from nearby sources was measured in the ground-based calibration at the beamline in Institute of Space and Astronautical Science. The contamination at 4.5 keV were measured with sources distant from the SXS center by one width of the FOV in perpendicular and diagonal directions, that is, 3 and 4.5 arcmin-off, respectively. The average EA of the contamination in the four directions with the 3 and 4.5 arcmin-off were measured to be 2 and 0.6% of the on-axis EA of 412 cm (exp) for the SXS FOV, respectively. The contamination from a source distant by two FOV widths in a diagonal direction, that is, 8.6 arcmin-off was measured to be 0.1% of the on-axis at 4.5 keV. The contamination amounts were also measured at 1.5 keV and 8.0 keV which indicated that the ratio of the contamination EA to that of on-axis hardly depended on the source energy. The off-axis SXT-I images from 4.5 to 27 arcmin were acquired at intervals of -4.5 arcmin for the SXI FOV of 38 times 38 arcmin(exp 2). The image shrinked as the off-axis angle increased. Above 13.5 arcmin of off-angle, a stray appeared around the image center in the off-axis direction. As for the on-axis image, a ring-shaped stray appeared at the edge of SXI of approximately 18 arcmin distant from the image center.

Soft X-ray spectrometer↗
NASA NTRS1991

Southern Hemisphere tropospheric aerosol microphysics

Aerosol particle-size distribution data have been obtained in the Southern Hemisphere from approximately 4-deg S to 44-deg S and between ground level and 5 km, in the vicinity of eastern Australia. The relative shape of the free-tropospheric size distribution for particles with radii larger than approximately 0.04 micron was found to be remarkably stable with time, altitude, and location for the autumn-winter periods considered. This was despite some large concentration changes, which were found to be typical of the southeastern Australian coastal region. The majority of free-troposphere large particles were found to have sulfuric acid or lightly ammoniated sulfate morphology. Large particles in the boundary layer almost exclusively had a sea-salt morphology.

Gras, John L.↗
DOE OSTI2022

Revisiting the Hail Radar Reflectivity–Kinetic Energy Flux Relation by Combining T-Matrix and Discrete Dipole Approximation Calculations to Size Distribution Observations

The retrieval of hail kinetic energy with weather radars or its simulation in numerical models is challenging because of the shape complexity and variable density of hailstones. We combine 3D scans of individual hailstones with measurements of the particle size distributions (PSD) and T-matrix calculations to understand how hail reflectivity Z changes when approximating hailstones as spheroids, as compared to the realistic shapes obtained by 3D scanning technology. Additionally, recent terminal velocity relations are used to compare Z to the hail kinetic energy flux E ˙ . We parameterize the hail backscattering cross sections at L, S, C, and X bands as a function of size between 0.5 and 5.0 cm, matching the range of the observed PSDs. The scattering calculations use the T-matrix method for size parameters below 1.0 and the discrete dipole approximation (DDA) method otherwise. The DDA calculations are done for 48 digital models of realistic hailstones of sizes between 1 and 5 cm. The DDA cross sections are calculated for multiple orientations and averaged assuming a fully random orientation distribution to provide a single value per hailstone. The T-matrix reflectivity assuming solid ice spheres presents negligible differences to DDA results for size parameters below 1.0. Therefore, T matrix was used to fill in the gaps left by the DDA calculations. The results are mapped to the same size bins of the observed PSDs, allowing the calculation of the radar reflectivity. This is then correlated to E ˙ , allowing a potential improvement of past retrieval methods of E ˙ from Z in multiple wavelengths.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1978

Fission origin of the moon - Cause and timing

A new scenario is offered for the origin of the moon. It is assumed that the earth formed initially with about the maximum amount of angular momentum consistent with dynamical stability. This state is approximated by the secularly unstable Maclaurin spheroids (highly flattened hamburger-shaped bodies). It is shown that the earth cannot depart from this state at a reasonable rate as long as its viscosity is in the range of liquid rock. Since core formation supplies about 1600 kJ/kg, the earth will not leave this state until core formation is complete. When cooling produces a rise in viscosity, the earth will necessarily evolve along a path which is approximated by the Riemann ellipsoids (which have rapid internal motion). The evolution is toward a Jacobi ellipsoid, but it is intercepted by the development of a third-harmonic (pear-shaped) instability, which is catastrophic and leads to fission. The process of fission itself may be fundamentally analogous to the breaking of a wave in water. We cannot exclude the possibility that some other planets evolved similarly.

Okeefe, J. A.↗
NASA NTRS1988

Planetary scaling laws and predictions for Neptune

This paper offers a prediction concerning Neptune's low-frequency radio emission based on the radiometric Bode's law in combination with a recent prediction for Neptune's global magnetic field strength. The latter is based on a dynamo scaling relation derived from the magnetospheric balance condition within planetary cores. The radio emission frequency range is predicted to extend from approximately 100 to 1000 kHz, with a spectral peak between 350 and 500 kHz. A crude estimate of the emission spectral shape, based on Saturn and earth-like models, is shown. If radiation is beamed approximately in the sunward direction, Neptune should be detectable by the Planetary Radio Astronomy experiment onboard the Voyager spacecraft sometime between 45 and 60 days before closest approach.

Desch, Michael D.↗
NASA NTRS1995

Extended soft X-ray emission in Seyfert galaxies: ROSAT HRI observations of NGC 3516, NGC 4151, and Markarian 3

We have used the ROSAT High Resolution Imager (HRI) to examine the distribution of soft X-rays in three nearby Seyfert galaxies with approximately 4 to 5 arcsecs FWHM spatial resolution. A feature of our analysis is an attempt to remove errors in the aspect solution using a method developed by one of us (J.M.). NGC 4151 shows resolved X-ray emission that is spatially correlated with the optical extended narrow-line region (ENLR), confirming the results obtained with the Einstein HRI by Elvis, Briel, & Henry. NGC 3516 is elongated along a position angle of approximately 40 to 220 deg, similar to the direction of the Z-shaped narrow-line region. MRK 3 is very faint in our HRI image and is probably spatially unresolved. We detect the faint X-ray source approximately 2 arcmins west of the MRK 3 nucleus previously found by Turner, Urry, & Mushotzky. We also detected the BL Lac object BL 1207 + 39 approximately 5 arcmins north-northwest of NGC 4151. This object appears spatially unresolved, but some excess X-ray emission may be observed in the azimuthally averaged radial brightness profile of BL 1207 + 39 between radii of 10 arcsecs and 30 arcsecs when compared to a calibration source. A much deeper image is necessary to confirm this result.

Morse, Jon A.↗
DOE OSTI2023

Airfoil Computational Fluid Dynamics - 9k shapes, 2 AoA's

This dataset contains aerodynamic quantities - including flow field values (momentum, energy, and vorticity) and summary values (coefficients of lift, drag, and momentum) - for 8,996 airfoil shapes, computed using the HAM2D CFD (computational fluid dynamics) model. The airfoil shapes were designed using the separable shape tensor parameterization that encodes two-dimensional shapes as elements of the Grassmann manifold. This data-driven approach learns two independent spaces of parameter from a collection of sample airfoils. The first captures large-scale, linear perturbations, and the second defines small-scale, higher-order perturbations. For this data, we used the G2Aero database of over 19,000 airfoil shapes to learn a parameter space that captured a wide array of shape characteristics. We fixed the linear deformations to be the mean over the database and sampled new shapes over a four-dimensional parameter space of higher-order perturbation. This sampling approaches allows for isolated analysis of non-linear airfoil shape deformations while holding other aspects (e.g., airfoil thickness) approximately constant. The aerodynamic quantities for the generated airfoil were obtained using the HAM2D code, which is a finite-volume Reynolds-averaged Navier-Stokes (RANS) flow solver. We employ a fifth-order WENO scheme for spatial reconstruction with Roe's flux difference scheme for inviscid flux and second-order central differencing for viscous flux. A preconditioned GMRES method is applied for implicit integration. The Spalart-Allmaras 1-eq turbulence model is used for the turbulence closure, and the Medida-Baeder 2-eq transition model is applied to account for the effects of laminar turbulent transition. The airfoil grid is generated with a total of 400 points on the airfoil surface, the initial wall-normal spacing of y+ = 1, and an outer boundary located at 300 chord lengths away from the wall. The CFD simulations are performed at a freestream Mach number of 0.1, Reynolds number of 9M, and at two angles of attack, 4 deg. and 12 deg. The simulations were performed using the Bridges-2 system at the Pittsburgh Supercomputing Center in February 2023 as part of the INTEGRATE project funded by the Advanced Research Projects Agency - Energy in the U.S. Department of Energy. The data was collected, reformatted, and preprocessed for this OEDI submission in July 2023 under the Foundational AI for Wind Energy project funded by the U.S. Department of Energy Wind Energy Technologies Office. This dataset is intended to serve as a benchmark against which new artificial intelligence (AI) or machine learning (ML) tools may be tested. Baseline AI/ML methods for analyzing this dataset have been implemented, and a link to their repository containing those models has been provided. The .h5 data file structure can be found in the GitHub Repository resource under explore_airfoil_9k_data.ipynb.

9k↗
NASA NTRS1986

Low-loss off-axis feeds for symmetric dual-reflector antennas

Circularly symmetric, dual reflector, high gain antenna systems often require feeds placed off the system's axis because of the need for multiple feeds to use the reflector antenna. Also, the constraint requiring the hyperboloid or shaped subreflector to remain circularly symmetric is sometimes added. In a Cassegrainian system, the subreflector and feed may be rotated off axis around the paraboloid focus and retain main reflector focusing. However, substantial spillover results in considerable noise with a high gain/low noise temperature system. In a shaped system, the tilt of the shaped subreflector and feed together results in substantial defocusing as well as spillover noise. If the subreflector is tilted approximately one-half the angle of the feed tilt in either the Cassegrainian or the dual shaped reflector antenna, it is found that spillover and noise are substantially reduced with tolerable defocusing. An extensive numerical analysis of these effects was conducted to determine the characteristics of a planned 70-meter, dual shaped reflector versus Cassegrainian antenna and to gain some understanding of the cause of the observed effects.

Veruttipong, T.↗
NASA NTRS1987

Low-loss offset feeds for electrically large symmetric dual-reflector antennas

Circularly symmetric, dual reflector, high gain antenna systems often require feeds placed off the system's axis because of the need for multiple feeds to use the reflector antenna. Also, the constraint requiring the hyperboloid or shaped subreflector to remain circularly symmetric is sometimes added. In a Cassegrainian system, the subreflector and feed may be rotated off axis around the paraboloid focus and retain main reflector focusing. However, substantial spillover results in considerable noise with a high gain/low noise temperature system. In a shaped system, the tilt of the shaped subreflector and feed together results in substantial defocusing as well as spillover noise. If the subreflector is tilted approximately one-half the angle of the feed tilt in either the Casegrainian or the dual shaped reflector antenna, it is found that spillover and noise are substantially reduced with tolerable defocusing. An extensive numerical analysis of these effects was conducted to determine the characteristics of a planned 70-meter, dual shaped reflector versus Cassegrainian antenna and to gain some understanding of the cause of the observed effects.

Veruttipong, Thavath↗
NASA NTRS1995

The interstellar disk-halo connection in the spiral galaxy NGC 3079

We discuss the morphology and excitation of ionized gas in the nearby Sc galaxy NGC 3079. The almost edge-on orientation is ideal for studying the vertical structure of the gaseous disk, and especially the diffuse ionized medium (DIM) found between the bright H II regions. We used the Hawaii Imaging Fabry-Perot Interferometer (HIFI) to map 150,000 H-alpha + (N II) lambda lambda 6548, 6583 emission-line profiles across the entire disk, with resolution 70 km/s at subarcsecond steps, down to a flux level of approximately 10(exp -17) ergs/s/sq cm (EM approximately equal to 4 cm(exp -6) pc). The DIM contributes approximately 30% of the total disk H-alpha emission within a radius of 10 kpc. The DIM has broader emission lines and larger (N II) H-alpha flux ratios than the adjacent H II regions. Within a radius of 5 kpc, we find that the X-shaped filaments reported in previous studies emerge from the inner (R approximately equal to 1.5 kpc) disk, and rise more than 4 kpc above the disk plane. The morphology, kinematics, and excitation of the filaments suggest that they form a biconic interface between the undisturbed disk gas, and gas entrained in the wide-angle outflow. The DIM beyond 5 kpc radius is more vertically extended than the thick ionized disk detected in our Galaxy and in a few nearby edge-on systems. After correcting for dust, the vertical profile of this DIM has an exponential scale height of about 1.1 kpc, similar to that of the H I disk. The (N II) lambda 6538/H-alpha flux ratio of the DIM increases monotonically with vertical height, reaching unity for absolute value of z greater than or approximately equal to 2.5 kpc. The flux required to keep the DIM ionized at R = 8 kpc is similar to that near the solar circle of our Galaxy. Highly dilute radiation from O stars in the galactic plane probably maintains the DIM. The total mass of the DIM is of order 10(exp 8) - 10(exp 9) solar mass, representing less than 1% of the total dynamical mass of NGC 3079. Mechanical energy from intense star formation in the disk probably lifts the DIM above the disk. The several bubbles and filaments within 1 kpc of the disk plane is direct evidence for gas flow between the disk and halo.

Veilleux, Sylvain↗
DOE OSTI2021

Deployment of a double scatter system for directional detection of background neutron radiation

The detection of special nuclear materials (SNM) requires the understanding of nuclear signatures that allow the discrimination against background. In particular, understanding neutron background characteristics such as count rates and energies and their correlations with environmental conditions and surroundings of measurement locations is important in enhancing SNM detection capabilities. The Mobile Imager of Neutrons for Emergency Responders (MINER) was deployed for 8 weeks in downtown San Francisco (CA) to study such neutron background characteristics in an urban environment. Of specific interest was the investigation of the impact of surrounding buildings on the neutron background count rates and to answer the question whether buildings act as absorber of neutrons or as sources via the so-called ship effect. MINER consists of 16 liquid scintillator detector elements and can be operated as a neutron spectrometer, as a neutron imager, or simply as a counter of fast neutrons. As expected, the neutron background rate was found to be inversely proportional to the atmospheric pressure. In the energy range where MINER is most sensitive, approximately 1–10 MeV, it was found that the shape of the detected background spectrum is similar to that of a detected fission spectrum, indicating the limited discrimination power of the neutron energy. The similarities between the detected background neutron spectrum and fission sources makes it difficult to discriminate SNM from background based solely on the energies observed. The images produced using maximum likelihood expectation maximization revealed that neutrons preferentially are coming from areas in the environment that have open sky, indicating that the surrounding buildings act as absorbers of neutrons rather than sources as expected by the ship effect. Here, the inherent properties of a neutron scatter camera limit the achievable image quality and the effective deployment to systematically map neutron background signatures due to the low count rate.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Nanoscale Turing patterns in a bismuth monolayer

Turing’s reaction–diffusion theory of morphogenesis has been very successful for understanding macroscopic patterns within complex objects ranging from biological systems to sand dunes. However, Turing patterns on microscopic length scales are extremely rare. Here we show that a strained atomic bismuth monolayer assembled on the surface of NbSe 2 —and subject to interatomic interactions and kinetics—displays Turing patterns. Our reaction–diffusion model produces stripe patterns with a period of five atoms (approximately 2 nm) and domain walls with Y-shaped junctions that bear a striking resemblance to what has been experimentally observed. Our work establishes that Turing patterns can occur at the atomic scale in a hard condensed-matter setting.

36 MATERIALS SCIENCE↗
DOE OSTI2021

All-Order Full-Coulomb Quantum Spectral Line-Shape Calculations

Understanding how atoms interact with hot dense matter is essential for astrophysical and laboratory plasmas. Interactions in high-density plasmas broaden spectral lines, providing a rare window into interactions that govern, for example, radiation transport in stars. However, up to now, spectral line-shape theories employed at least one of three common approximations: second-order Taylor treatment of broadening operator, dipole-only interactions between atom and plasma, and classical treatment of perturbing electrons. In this Letter, we remove all three approximations simultaneously for the first time and test the importance for two applications: neutral hydrogen and highly ionized magnesium and oxygen. Finally, we found 15%–50% change in the spectral line widths, which are sufficient to impact applications including white-dwarf mass determination, stellar-opacity research, and laboratory plasma diagnostics.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

A substandard candle: the low-$$\nu $$ method at few-GeV neutrino energies

Abstract As accelerator-based neutrino oscillation experiments improve oscillation parameter constraints with more data, control over systematic uncertainties on the incoming neutrino flux and interaction models is increasingly important. The intense beams offered by modern experiments permit a variety of options to constrain the flux using in situ “standard candle” measurements. These standard candles must use very well understood interaction processes to avoid introducing additional interaction model dependence. One option often discussed in this context is the “low- $$\nu $$ ν ” method, which is designed to isolate neutrino interactions where there is low energy-transfer to the nucleus, such that the interaction cross section is expected to be approximately constant as a function of neutrino energy. The shape of the low-energy transfer event sample can then be used to extract the flux shape. Applications of the method at high neutrino energies (many tens of GeV) are well understood. However, the applicability of the method at the lower energies of current and future few-GeV accelerator neutrino experiments remains unclear due to the presence of nuclear and form-factor effects inherent in the interaction models.In this analysis we examine the prospects for improving constraints on the accelerator neutrino fluxes in situ with the low- $$\nu $$ ν method in an experiment-independent way, using (anti)neutrino interactions on argon and hydrocarbon targets from the GENIE, NEUT, NuWro and GiBUU event generators. We begin by investigating the extent to which deviations from the constant cross-section assumption are dependent on poorly understood aspects of the neutrino interaction model. We then assess whether a low energy-transfer event sample can be confidently identified using experimentally accessible observables. We finally consider how the practicalities of reconstructing the energy spectrum of interacting neutrinos in realistic detectors might further limit the utility of low- $$\nu $$ ν flux constraints. The results show that flux constraints from the low- $$\nu $$ ν method would be severely dependent on the interaction model assumptions used in an analysis of neutrinos with energies below 5 GeV, and anti-neutrinos below at least 15 GeV. The spread of model predictions show that a low- $$\nu $$ ν analysis is unlikely to offer much improvement on typical neutrino flux uncertainties, even with a perfect detector. Notably—running counter to the assumption inherent to the low- $$\nu $$ ν method—the model-dependence increases with decreasing energy transfer for experiments in the few-GeV region.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Electrochemical Deposition with Redox Replacement of Lanthanum with Uranium in Molten LiCl-KCl

Electrochemical recovery of dilute concentrations of actinides from spent nuclear fuel would reduce the longevity of storing high-level nuclear waste. Electrochemical deposition with redox replacement (EDRR) is used in a molten salt medium for the selective electrochemical recovery of uranium in the presence of excess concentrations of lanthanum. In each EDRR cycle, after a short electrodeposition pulse, the deposited lanthanum is spontaneously replaced by uranium at open circuit. After repeated cycles, uranium metal was obtained on a tungsten electrode immersed in LiCl-KCl melt that contained 1 wt.% lanthanum chloride – 0.15 wt.% uranium 4+ chloride. Here, scanning electron microscopy and energy dispersive X-ray spectroscopy analysis revealed uranium particles approximately 0.5 - 1 μm with well-defined rectangular shapes; and with 20 – 60 times more uranium recovered on the surface of the electrode than lanthanum.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
NASA NTRS1971

Lunar rilles: A catalog and method of classification

A representative sample of lunar rilles observed on Lunar Orbiter 4 and 5 photographs is presented. A method of classification of rilles is described which will provide a means of quantitatively grouping rilles of similar planemetric shape. The method is based on a finite Fourier approximation of the edge of the rille. It provides an adequate approximation to all planemetric characteristics of the rille except rille recurvature.

Oberbeck, V. R.↗
NASA NTRS1972

Ultraviolet photometry of the eclipsing variable CW Cephei

A series of photometric observations was made of the eclipsing variable CW Cephei on the OAO 2. Approximate elements were derived from the eclipse depths and shape of the secondary. Persistent asymmetries and anomalous light variations, larger than the expected experimental error, were also found, subsequent ground-based observations show H alpha entirely in emission, indicating the presence of an extended gaseous system surrounding one or both components. A detailed comparison was made of the flux distribution of the binary relative to that for the nominally unreddened stars delta Pic, BlIII, and eta Aur, B3V, to investigate the effects of interstellar extinction. The resultant extinction curves, normalized at a wavelength of 3330 A, show a relatively smooth increase with decreasing wavelength.

Sobieski, S.↗