Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “section”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Calculations of photo-induced X-ray production cross-sections in the energy range 1–150 keV and average fluorescence yields for Zn, Cd and Hg

In this paper, we calculate the K-, L- and M-shells X-ray production, and X-ray fluorescence cross-sections after photo-induced ionization, for Zn, Cd, and Hg, and for incident photon energy range from 1 to 150 keV. For this purpose, the corresponding average fluorescence yields for Zn, Cd, and Hg as well as the photoionization cross-sections were calculated using the Dirac–Fock method. Subshell fluorescence, intrashell and intershell yields are obtained consistently from radiative and radiationless transitions calculated in the exact same method. A comprehensive account of the relations between the X-ray production, X-ray fluorescence cross-sections and the photoionization cross-sections and these yields is presented. Comparisons are made with results from other authors. The obtained values for the photoionization cross-sections are in good agreement with the widely used data of Scofield in the studied energy range. However our results for the X-ray fluorescence cross sections seem to favor some data relatively to others. The energy dependence of the average fluorescence yields is discussed, in particular, the reliability of extrapolated data for lighter elements from measurements and calculations in heavier elements above the inner shell absorption edges is questioned. Tabulated data on photoionization and X-ray production cross-sections are presented for the incident photon energy range 1–150 keV in steps of 1 keV.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Measurement of electron impact collisional excitation cross sections of Ni to Ge-like gold

We have measured the collisional excitation cross sections for the 3d→4f and 3d→5f excitations in Au ions near the Ni-like charge state by using beam plasmas created in the Livermore electron beam ion trap EBIT-I. The cross sections have been experimentally determined at approximately 1, 2 and 3 keV above the threshold energy, ET, for the 3d→4f excitations (ET ~2.5 keV) and at approximately 0.1, 1 and 2 keV above the threshold energy for the 3d→5f excitations (ET ~3.3 keV). The cross section measurements were made possible by using the GSFC x-ray microcalorimeter at the Livermore EBIT facility. The absolute cross sections are determined from the ratio of the intensity of the collisionally excited bound-bound transitions to the intensity of the radiative recombination lines produced in EBIT-I plasmas. The effects of polarization and Auger decay channels are accounted for in the cross section determination. Measured cross sections are compared with those from HULLAC, DWS and FAC calculations. Finally, the measurements demonstrate that some errors exist in the calculated excitation cross sections.

74 ATOMIC AND MOLECULAR PHYSICS↗

Deep Learning for Multigroup Cross-Section Representation in Two-Step Core Calculations

Here we investigate using deep learning, a type of machine-learning algorithm employing multiple layers of artificial neurons, for the mathematical representation of multigroup cross sections for use in the Griffin reactor multiphysics code for two-step deterministic neutronics calculations. A three-dimensional fuel element typical of a high-temperature gas reactor as well as a two-dimensional sodium-cooled fast reactor lattice are modeled using the Serpent Monte Carlo code, and multigroup macroscopic cross sections are generated for various state parameters to produce a training data set and a separate validation data set. A fully connected, feedforward neural network is trained using the open-source PyTorch machine-learning framework, and its accuracy is compared against the standard piecewise linear interpolation model. Additionally, we provide in this work a generic technique for propagating the cross-section model errors up to the k eff using sensitivity coefficients with the first-order uncertainty propagation rule. Quantifying the eigenvalue error due to the cross-section regression errors is especially practical for appropriately selecting the mathematical representation of the cross sections. We demonstrate that the artificial neural network model produces lower errors and therefore enables better accuracy relative to the piecewise linear model when the cross sections exhibit nonlinear dependencies; especially when a coarse grid is employed, where the errors can be halved by the artificial neural network. However, for linearly dependent multigroup cross sections as found for the sodium-cooled fast reactor case, a simpler linear regression outperforms deeper networks.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Fast, accurate photon beam accelerator modeling using BEAMnrc: A systematic investigation of efficiency enhancing methods and cross-section data

In this work, an investigation of efficiency enhancing methods and cross-section data in the BEAMnrc Monte Carlo (MC) code system is presented. Additionally, BEAMnrc was compared with VMC++, another special-purpose MC code system that has recently been enhanced for the simulation of the entire treatment head. BEAMnrc and VMC++ were used to simulate a 6 MV photon beam from a Siemens Primus linear accelerator (linac) and phase space (PHSP) files were generated at 100 cm source-to-surface distance for the 10x10 and 40x40 cm{sup 2} field sizes. The BEAMnrc parameters/techniques under investigation were grouped by (i) photon and bremsstrahlung cross sections, (ii) approximate efficiency improving techniques (AEITs), (iii) variance reduction techniques (VRTs), and (iv) a VRT (bremsstrahlung photon splitting) in combination with an AEIT (charged particle range rejection). The BEAMnrc PHSP file obtained without the efficiency enhancing techniques under study or, when not possible, with their default values (e.g., EXACT algorithm for the boundary crossing algorithm) and with the default cross-section data (PEGS4 and Bethe-Heitler) was used as the ''base line'' for accuracy verification of the PHSP files generated from the different groups described previously. Subsequently, a selection of the PHSP files was used as input for DOSXYZnrc-based water phantom dose calculations, which were verified against measurements. The performance of the different VRTs and AEITs available in BEAMnrc and of VMC++ was specified by the relative efficiency, i.e., by the efficiency of the MC simulation relative to that of the BEAMnrc base-line calculation. The highest relative efficiencies were {approx}935 ({approx}111 min on a single 2.6 GHz processor) and {approx}200 ({approx}45 min on a single processor) for the 10x10 field size with 50 million histories and 40x40 cm{sup 2} field size with 100 million histories, respectively, using the VRT directional bremsstrahlung splitting (DBS) with no electron splitting. When DBS was used with electron splitting and combined with augmented charged particle range rejection, a technique recently introduced in BEAMnrc, relative efficiencies were {approx}420 ({approx}253 min on a single processor) and {approx}175 ({approx}58 min on a single processor) for the 10x10 and 40x40 cm{sup 2} field sizes, respectively. Calculations of the Siemens Primus treatment head with VMC++ produced relative efficiencies of {approx}1400 ({approx}6 min on a single processor) and {approx}60 ({approx}4 min on a single processor) for the 10x10 and 40x40 cm{sup 2} field sizes, respectively. BEAMnrc PHSP calculations with DBS alone or DBS in combination with charged particle range rejection were more efficient than the other efficiency enhancing techniques used. Using VMC++, accurate simulations of the entire linac treatment head were performed within minutes on a single processor. Noteworthy differences ({+-}1%-3%) in the mean energy, planar fluence, and angular and spectral distributions were observed with the NIST bremsstrahlung cross sections compared with those of Bethe-Heitler (BEAMnrc default bremsstrahlung cross section). However, MC calculated dose distributions in water phantoms (using combinations of VRTs/AEITs and cross-section data) agreed within 2% of measurements. Furthermore, MC calculated dose distributions in a simulated water/air/water phantom, using NIST cross sections, were within 2% agreement with the BEAMnrc Bethe-Heitler default case.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

How Many Muons Do We Need to Store in a Ring For Neutrino Cross-Section Measurements?

Analytical estimate of the number of muons that must decay in the straight section of a storage ring to produce a neutrino & anti-neutrino beam of sufficient intensity to facilitate cross-section measurements with a statistical precision of 1%. As we move into the era of precision long-baseline {nu}{sub {mu}} {yields} {nu}{sub e} and {bar {nu}}{sub {mu}} {yields} {bar {nu}}{sub e} measurements there is a growing need to precisely determine the {nu}{sub e} and {bar {nu}}{sub e} cross-sections in the relevant energy range, from a fraction of 1 GeV to a few GeV. This will require {nu}{sub e} and {bar {nu}}{sub e} beams with precisely known fluxes and spectra. One way to produce these beams is to use a storage ring with long straight sections in which muon decays ({mu}{sup -} {yields} e{sup -}{nu}{sub {mu}}{bar {nu}}{sub e} if negative muons are stored, and {nu}{sup +} {yields} e{sup +}{nu}{sub e}{bar {nu}}{sub {mu}} if positive muons are stored) produce the desired beam. The challenge is to capture enough muons in the ring to obtain useful neutrino and anti-neutrino fluxes. Early proposals to use a muon storage ring for neutrino oscillation experiments were based upon injecting 'high energy' charged pions into the ring which then decayed to create stored muons. These proposals were hampered by lack of sufficient intensity to pursue the physics. The Neutrino Factory proposal in 1997 was designed to fix this problem by using a Muon Collider class 'low energy' muon source to capture many more pions at low energy, allow them to decay in an external decay channel, manipulate their phase space to capture as many muons as possible within the acceptance of an accelerator, and then accelerate to the energy of choice before injecting into a specially designed ring with long straight sections. All this technology would do a wonderful job in fixing the intensity problem, but at a price that excludes this solution from being realized in the short term. The question that we are now faced with is whether the older, lower intensity 'parasitic' muon storage ring based on 'high energy' pion decays can, with suitable modification, produce sufficient intensity to measure the desired cross-sections. Fortunately, the intensity requirements for cross-section measurements are less demanding than the corresponding requirements for oscillation measurements, so there is hope. To fuel the discussion, in this note we consider the design goal: how many muons do we need to store?

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Surrogate Measurements of Actinide (n,2n) Cross Sections with NeutronSTARS

Directly measuring (n,2n) cross sections on short-lived actinides presents a number of experimental challenges. The surrogate reaction technique is an experimental method for measuring cross sections on short-­lived isotopes, and it provides a unique solution for measuring (n,2n) cross sections. This technique involves measuring a charged-­particle reaction cross section, where the reaction populates the same compound nucleus as the reaction of interest. To perform these surrogate (n,2n) cross section measurements, a silicon telescope array has been placed along a beam line at the Texas A&M University Cyclotron Institute, which is surrounded by a large tank of gadolinium-doped liquid scintillator, which acts as a neutron detector. The combination of the charge-particle and neutron-detector arrays is referred to as NeutronSTARS. In the analysis procedure for calculating the (n,2n) cross section, the neutron detection efficiency and time structure plays an important role. Due to the lack of availability of isotropic, mono-energetic neutron sources, modeling is an important component in establishing this efficiency and time structure. This report describes the NeutronSTARS array, which was designed and commissioned during this project. It also describes the surrogate reaction technique, specifically referencing a 235 U(n,2n) commissioning measurement that was fielded during the past year. Advanced multiplicity analysis techniques have been developed for this work, which should allow for efficient analysis of 241 Pu(n,2n) and 239 Pu(n,2n) cross section measurements

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Measurement of Neutrino-Nucleon Neutral-Current Elastic Scattering Cross-section at SciBooNE

In this thesis, results of neutrino-nucleon neutral current (NC) elastic scattering analysis are presented. Neutrinos interact with other particles only with weak force. Measurement of cross-section for neutrino-nucleon reactions at various neutrino energy are important for the study of nucleon structure. It also provides data to be used for beam flux monitor in neutrino oscillation experiments. The cross-section for neutrino-nucleon NC elastic scattering contains the axial vector form factor G A (Q 2 ) as well as electromagnetic form factors unlike electromagnetic interaction. G A is propotional to strange part of nucleon spin (Δs) in Q 2 → 0 limit. Measurement of NC elastic cross-section with smaller Q 2 enables us to access Δs. NC elastic cross-sections of neutrino-nucleon and antineutrino-nucleon were measured earlier by E734 experiment at Brookheaven National Laboratory (BNL) in 1987. In this experiment, cross-sections were measured in Q 2 > 0.4 GeV 2 region. Result from this experiment was the only published data for NC elastic scattering cross-section published before our experiment. SciBooNE is an experiment for the measurement of neutrino-nucleon scattering cross-secitons using Booster Neutrino Beam (BNB) at FNAL. BNB has energy peak at 0.7 GeV. In this energy region, NC elastic scattering, charged current elastic scattering, charged current pion production, and neutral current pion production are the major reaction branches. SciBar, electromagnetic calorimeter, and Muon Range Detector are the detectors for SciBooNE. The SciBar consists of finely segmented scintillators and 14336 channels of PMTs. It has a capability to reconstruct particle track longer than 8 cm and separate proton from muons and pions using energy deposit information. Signal of NC elastic scattering is a single proton track. In vp → vp process, the recoil proton is detected. On the other hand, most of vn → vn is invisible because there are only neutral particles in final state, but sometimes recoil neutron is scattered by proton and recoil proton is detected. Signal of this event is also single proton track. Event selection for the single proton track events using geometrical and dE/dx information of reconstructed track is performed. After the event selection, NC elastic scattering data sample is obtained. They includes vp → vp and vn → vn is obtained. Absolute cross-section as a function of Q 2 is evaluated from this NC elastic scattering data sample.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Genomic Analysis of Aspergillus Section Terrei Reveals a High Potential in Secondary Metabolite Production and Plant Biomass Degradation

Aspergillus terreus has attracted interest due to its application in industrial biotechnology, particularly for the production of itaconic acid and bioactive secondary metabolites. As related species also seem to possess a prosperous secondary metabolism, they are of high interest for genome mining and exploitation. Here, we present draft genome sequences for six species from Aspergillus section Terrei and one species from Aspergillus section Nidulantes. Whole-genome phylogeny confirmed that section Terrei is monophyletic. Genome analyses identified between 70 and 108 key secondary metabolism genes in each of the genomes of section Terrei, the highest rate found in the genus Aspergillus so far. The respective enzymes fall into 167 distinct families with most of them corresponding to potentially unique compounds or compound families. Moreover, 53% of the families were only found in a single species, which supports the suitability of species from section Terrei for further genome mining. Intriguingly, this analysis, combined with heterologous gene expression and metabolite identification, suggested that species from section Terrei use a strategy for UV protection different to other species from the genus Aspergillus. Section Terrei contains a complete plant polysaccharide degrading potential and an even higher cellulolytic potential than other Aspergilli, possibly facilitating additional applications for these species in biotechnology.

60 APPLIED LIFE SCIENCES↗

ORNL Neutron Cross-Section Measurements Activities

To support the Nuclear Criticality Safety Program, neutron cross-section measurements have been initiated using GELINA at the European Commission Joint Research Center IRMM. Concerns about data deficiencies in some existing cross-section evaluations from libraries such as ENDF/B, JEFF, or JENDL for nuclear criticality calculations have been the prime motivator for new cross section measurements. Over the past years, many problems with existing nuclear data have been emerging. An example is the use of the evaluated neutron cross-section data for tungsten in nuclear criticality safety calculations, which exhibit discrepancies in benchmark calculations and show the need for reliable covariance data. We recently measured the neutron total and capture cross sections of 182,183,184,186 W, 63,65 Cu, and natural calcium in the neutron energy range from 100 eV to several hundred keV. This will help to improve the representation of the cross sections since most of the available evaluated data rely only on old measurements. Besides, most of the evaluations in the nuclear data libraries are missing high-fidelity covariance data. New covariance data for the libraries can only be created by a reevaluation of the cross-section data; however, sometimes this impossible because the data used in the analysis and evaluations are no longer available. In such cases, this shortfall can be overcome only by new experimental data included in a new evaluation.

97 MATHEMATICS AND COMPUTING↗

Eikonal Corrections for Nucleus-Nucleus Reaction Cross Sections - Paper 90

The goal of this research is to modify a Fortran computer code, which uses an optical potential approximation to quantum mechanical multiple-scattering theory to compute total and reaction cross sections for nucleon-nucleus and nucleus-nucleus collisions for use in space radiation protection and shielding applications. These nuclear collision cross sections are utilized in space radiation transport codes that describe the passage of solar and galactic cosmic radiation fields through matter. In the code being modified by this work, an Eikonal approximation, in analogy with the complex index of refraction used to describe absorption in optics, is used to formulate the nuclear scattering amplitudes that describe the total and reaction cross sections in the formalism. Previous work found that the cross sections calculated with this model sometimes underestimated the experimental data. It has been noted that the Eikonal phase functions, which are used to calculate these cross sections and which contain all of the scattering information in the model, can be improved by incorporating higher order corrections In this work, a previously-developed first-order correction to the Eikonal phase function is coded in Fortran and incorporated into the optical model computer code that calculates reaction cross sections for nucleon-nucleus and nucleus-nucleus collisions at energies relevant to space radiation protection and shielding. The main thrust of this work is to test the use of this higher order correction by calculating reaction cross sections for a variety of nuclear collisions and comparing the results to experimental data. (authors)

61 RADIATION PROTECTION AND DOSIMETRY↗

Electron collisions with CO: Elastic and vibrational excitation cross sections

Absolute differential elastic and vibrational excitation cross sections up to v=11 were measured for CO in scattering angle ranges extending to 180 deg. at energies between 0.2 and 5 eV (and an elastic measurement at 10 eV). The lowest angles were 0 deg. for inelastic scattering and between 5 deg. and 20 deg. for elastic scattering, depending on energy. Integral cross sections were derived by integrating under the angular distributions and compared with previous beam and swarm measurements. The sum of the integral cross sections agrees very well with the available transmission measurements of the grand total cross section, thus validating the present measurements. The present elastic differential and integral cross sections are in excellent agreement with the best available measurement [Gibson et al., J. Phys. B 29, 3197 (1996)], but the v=1 inelastic cross section is about 25% higher. This could have consequences for simulations of cometary and planetary atmospheres.

74 ATOMIC AND MOLECULAR PHYSICS↗

Electron-capture cross sections for Li{sup +} colliding on H and H{sub 2} in the low-keV energy region

Absolute total and differential cross sections have been measured for neutral Li formation in single collisions of Li{sup +} on H{sub 2} from 1 to 5 keV. Total cross sections were obtained by direct integration of measured differential cross sections and are in good agreement with earlier cross-sectional measurements. A comparison of the differential cross sections plotted as a function of the reduced variables {theta}sin{theta}d{sigma}/d{Omega} vs E{theta} is also presented with a comparison of the maximum of the curves of the present data. Theoretically, we report state to state and summed charge transfer at collision energies ranging from 0.1 to 25 keV/amu. Cross sections were calculated using a nonadiabatic time-dependent direct approach for study of ion-atom and ion-molecule interaction processes. We verify that the main electron-capture channel is in the n=2 state of Li with a large probability for electron capture for impact parameters below 2 a.u. for collisions on both H and H{sub 2} in the so-called rotational region of the collision. In the case of atomic hydrogen, the electron-capture probability into the 2s and 2p states shows an oscillating behavior that smooths out when summed. For the molecular case, we find that for projectile energies larger than 1 keV, ionization effects become important. Our results show good agreement when compared to other available experimental and theoretical data.

74 ATOMIC AND MOLECULAR PHYSICS↗

Measurement of the $\mathrm{ t \bar{t} }$ production cross section in the $\mathrm{ e \mu }$ channel in proton-proton collisions at $\sqrt{s} =$ 7 and 8 TeV

The inclusive cross section for top quark pair production is measured in proton-proton collisions at √s = 7 and 8 TeV, corresponding to 5.0 and 19.7 fb –1 , respectively, with the CMS experiment at the LHC. The cross sections are measured in the electron-muon channel using a binned likelihood fit to multi-differential final state distributions related to identified b quark jets and other jets in the event. The measured cross section values are 173.6 ± 2.1 (stat) +4.5 -4.0 (syst) ± 3.8 (lumi) pb at √s = 7 TeV, and 244.9 ± 1.4 (stat) +6.3 -5.5 (syst) ± 6.4 (lumi) pb at √s = 8 TeV, in good agreement with QCD calculations at next-to-next-to-leading-order accuracy. The ratio of the cross sections measured at 7 and 8 TeV is determined, as well as cross sections in the fiducial regions defined by the acceptance requirements on the two charged leptons in the final state. The cross section results are used to determine the top quark pole mass via the dependence of the theoretically predicted cross section on the mass, giving a best result of 173.8 +1.7 -1.8 GeV. Furthermore, the data at √s = 8 TeV are also used to set limits, for two neutralino mass values, on the pair production of supersymmetric top squarks with masses close to the top quark mass.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurements of the differential jet cross section as a function of the jet mass in dijet events from proton-proton collisions at $ \sqrt{s}=13$ TeV

Measurements of the differential jet cross section are presented as a function of the jet mass in dijet events, in bins of jet transverse momentum, with and without a jet grooming algorithm. The data have been recorded by the CMS Collaboration in proton-proton collisions at the LHC at a center-of-mass energy of 13 TeV and correspond to an integrated luminosity of 2.3 fb$^{-1}$. The absolute cross sections show slightly different jet transverse momentum spectra in data and Monte Carlo event generators for the settings used. Removing this transverse momentum dependence, the normalized cross section for ungroomed jets is consistent with the prediction from Monte Carlo event generators for masses below 30% of the transverse momentum. The normalized cross section for groomed jets is measured with higher precision than the ungroomed cross section. Semi-analytical calculations of the jet mass beyond leading logarithmic accuracy are compared to data, as well as predictions at leading order and next-to-leading order, which include parton showering and hadronization. Overall, in the normalized cross section, the theoretical predictions agree with the measured cross sections within the uncertainties for masses from 10 to 30% of the jet transverse momentum.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Total reaction cross sections in CEM and MCNP6 at intermediate energies

Accurate total reaction cross section models are important to achieving reliable predictions from spallation and transport codes. The latest version of the Cascade Exciton Model (CEM) as incorporated in the code CEM03.03, and the Monte Carlo N-Particle transport code (MCNP6), both developed at Los Alamos National Laboratory (LANL), each use such cross sections. Having accurate total reaction cross section models in the intermediate energy region (50 MeV to 5 GeV) is very important for different applications, including analysis of space environments, use in medical physics, and accelerator design, to name just a few. The current inverse cross sections used in the preequilibrium and evaporation stages of CEM are based on the Dostrovsky et al. model, published in 1959. Better cross section models are now available. Implementing better cross section models in CEM and MCNP6 should yield improved predictions for particle spectra and total production cross sections, among other results.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The surprisingly large neutron capture cross-section of 88 Zr

The probability that a nucleus will absorb a neutron, described in units of area as the neutron-capture cross section, is important to many areas of nuclear science including stellar nucleosynthesis, reactor performance, nuclear medicine, and defense applications. Although neutron-capture cross-sections have been directly measured for most stable nuclei, fewer results exist for radioactive isotopes and predictions typically have large uncertainties. There are almost no nuclear data for neutron-induced reactions on the radioactive nucleus 88 Zr, despite its significance for nuclear-security missions. By exposing 88 Zr to the intense neutron flux of a nuclear reactor, it was determined that 88 Zr has a thermal neutron capture cross section of (861,000 ± 69,000) b, which is the second-largest ever measured, despite being predicted to be only 10 b. The only other nuclei known to have thermal neutron capture cross sections greater than 1x10 5 b are 135 Xe and 157 Gd (2.6x10 6 b and 2.5x10 5 b, respectively) and no other cross section of comparable size has been discovered in the past 70 years (Fig. 1). The measurement of the 135 Xe cross section followed the determination that a fission product was poisoning the early reactors.7 The applications for 157 Gd were not immediately appreciated, but now the isotope has been developed into a detector material, burnable reactor poison, and potential medical neutron capture therapy (NCT) agent. In the case of 88 Zr, a unique aspect of the neutron-capture reaction is that both the target and the product 89 Zr nuclei are radioactive and give intense γ-ray emissions upon decay. This result suggests that as additional measurements with radioactive isotopes become feasible in the near future via access to new facilities for sample production and measurement, other cross-section surprises may be uncovered.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Database work for the new cross section standards evaluation

An effort is now underway to produce a new evaluation of the neutron standards. It is important to maintain experimental programs to increase the quality and extend the database for the neutron cross section standards in order to improve evaluations of them that will be used to convert cross section measurements made relative to those standards. Measurements have been made for most of the standard cross sections since the last evaluation of the standards. The improved database includes the cross sections for the H(n,n), 6Li(n,t), 10B(n,αγ), 10B(n,α), C(n,n), Au(n,γ), 235U(n,f) and 238U(n,f) standard reactions and ratios among them. The database also includes the 238U(n,γ) and 239Pu(n,f) cross sections in addition to the standard cross sections. Those data were included since there are many ratio measurements of those cross sections with the standards and absolute data are available for them.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Resonance effects in elastic cross sections for electron scattering on pyrimidine: Experiment and theory

Here, we measured differential cross sections for elastic (rotationally integrated) electron scattering on pyrimidine, both as a function of angle up to 180° at electron energies of 1, 5, 10, and 20 eV and as a function of electron energy in the range 0.1–14 eV. The experimental results are compared to the results of the fixed-nuclei Schwinger variational and R-matrix theoretical methods, which reproduce satisfactorily the magnitudes and shapes of the experimental cross sections. The emphasis of the present work is on recording detailed excitation functions revealing resonances in the excitation process. Resonant structures are observed at 0.2, 0.7, and 4.35 eV and calculations for different symmetries confirm their assignment as the $\sim\atop{\chi}$ 2 A 2 , $\sim\atop{A}$ 2 B 1 , and $\sim\atop{B}$ 2 B 1 shape resonances. As a consequence of superposition of coherent resonant amplitudes with background scattering the $\sim\atop{B}$ 2 B 1 shape resonance appears as a peak, a dip, or a step function in the cross sections recorded as a function of energy at different scattering angles and this effect is satisfactorily reproduced by theory. The dip and peak contributions at different scattering angles partially compensate, making the resonance nearly invisible in the integral cross section. Vibrationally integrated cross sections were also measured at 1, 5, 10 and 20 eV and the question of whether the fixed-nuclei cross sections should be compared to vibrationally elastic or vibrationally integrated cross section is discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗