Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “secondary source”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

A Study of Trailing Edge Blowing as a Means of Reducing Noise Generated by the Interaction of Flow with a Surface

A system for reducing the noise generated when a jet impinges against a flap is described. The eddies formed by the alternate zones of positive and negative pressure on the flap surface are identified as the sound source. In the proposed concept, a stream of low velocity secondary air is ejected from a slot near the trailing edge of the flap as a buffer between the flap and the primary air jet to reduce the intensity of the fluctuating surface pressure field near the flap edge and thus reduce the intensity of the aerodynamic noise.

Scharton, T. D.↗

Spectroscopic observations of the Cygnus X-1 optical candidate.

Data from nine high-dispersion spectra of HDE 226868, the optical candidate for Cyg X-1, are presented. The line profiles at He II (4686 A) show marked changes from night to night. Our data are not compatible with models where the emission line arises from the unseen secondary component of the system, as has been suggested by other observers. We propose that the emission originates in a gas stream falling toward the secondary; this provides observational evidence that the X-ray source is powered by accretion. We also see changes in spectral type and luminosity class with phase, further complicating attempts to make mass estimates for the system.

Smith, H. E.↗

LST secondary mirror articulation mechanism

The analysis, design, manufacture, test, and delivery of one secondary mirror articulation mechanism for the large space telescope (LST) are reported. The mechanism provides angular freedom about two axes that are perpendicular to the optical axis of the secondary mirror. Motion in each axis is controlled from two sources; one source provides alignment, the other source provides stabilization. Two articulation mechanism configurations were evaluated. In one configuration the stabilization system was assembled with piezoelectric actuators. In the second configuration the stabilization system utilized flexure torque motor actuators. The alignment system was the same for both configurations. System testing confirmed performance that met or exceeded all operational requirements. The two types of stabilization actuators had different performance characteristics. Both types demonstrated position resolution and frequency response better than specified limits.

Source record↗

The elemental and isotopic composition of cosmic rays - Silicon to nickel

The reported observations were made with the aid of the Cosmic Ray Isotope Instrument System (CRISIS) which had been designed to detect and resolve the isotopes of cosmic ray nuclei with atomic numbers equal to or greater than 10. The CRISIS detector was flown on a balloon launched from Aberdeen, South Dakota on 1977 May 20. The period 1977 May 19-22 has been classified by Mason et al. (1979) as one of 'superquiet' solar activity, characterized by the lowest fluxes of low-energy solar particles ever observed. The obtained results are presented in a number of graphs and tables. It was found that the elemental and isotopic abundances of Si are solar-like. Elemental S is underabundant in the cosmic rays by a factor of approximately 3 relative to the solar system, but its isotopic composition resembles the solar composition with S-32 being the dominant isotope. Elemental Ar is virtually absent in the source, and the observed isotopic composition is consistent with a secondary origin. Elemental Ni has a solar-like abundance.

Young, J. S.↗

Thermonuclear runaways in thick hydrogen rich envelopes of neutron stars

A Lagrangian, fully implicit, one-dimensional hydrodynamic computer code is used to evolve thermonuclear runaways in the accreted hydrogen-rich envelopes of 1.0-solar-mass neutron stars with radii of 10 km and 20 km. The simulations produce outbursts lasting from approximately 750 seconds to approximately one week. The peak effective temperatures and luminosities are 2.6 x 10 to the 7th K and 8 x 10 to the 4th solar luminosities for the 10 km study and 5.3 x 10 to the 6th K and 600 solar luminosities for the 20 km study. It is found that hydrodynamic expansion on the 10 km neutron star produced a precursor lasting approximately 0.0001 second. The study assumes that the bursters and transient X-ray sources occur as a result of mass transfer from a secondary onto a neutron star in a fashion analogous to the nova phenomena. The peak temperatures and luminosities are found to be inversely proportional to the radius of the neutron stars and the calculations here, together with those in the literature, indicate that the actual radii of most neutron stars must be closer to 10 km than 20 km.

Starrfield, S.↗

Juncture flow measurements using laser velocimetry

The turbulent flow in a simulated wing-fuselage juncture has been investigated using Laser Velocimetry. The juncture was simulated by a splitter plate with an unswept wing model mounted perpendicular to it. The use of sharp wing leading edge results in the elimination of separation ahead of leading edge, and hence the separation vortex. Secondary flow induced by Reynolds stress gradients is the main source of vortical motion in the juncture formed by the plate and the flat surface of the wing, whereas in the juncture formed by the plate and the circular arc surface of the wing, streamwise vorticity is generated because of the presence of lateral curvature in the flow field. The results of this study indicate that fillets in the juncture can improve the flow characteristics near the wing trailing edge.

Kubendran, L. R.↗

Atmospheric effects on crater growth on Venus

Laboratory experiments allow examining the consequences of complex processes operating over a wide range of scales (both temporal and spatial) and frequently reveal effects that are obvious only in hindsight. Even though all processes may not scale directly, isolation of the controlling variables allows assessing first-order effects through analytical approximations. This approach can be illustrated by the systematic sequence of ballistic ejection, the response of an atmosphere to a strong energy source, the scaling of ejecta thickness, and the role of secondary cratering. Here it is proposed that the effects of atmospheric pressure and density on crater growth (hence, scaling) observed in laboratory experiments has particular relevance for craters on Venus.

Schultz, Peter H.↗

The compressive strength of duralumin columns of equal angle section

This report presents a chart giving the compressive strength of duralumin columns of equal angle section. The data used in the construction of the chart were obtained from various published sources and were correlated with theory in the range where secondary failure occurred. Appendices are included giving excerpts from Army and Navy specifications for duralumin and approximate formulas for the properties of the equal angle section.

Lundquist, Eugene E↗

Hard X-Ray Variability of the Black Hole Candidate GRO J0422+32 During its 1992 Outburst

We have studied the hard X-ray variability of the soft X-ray transient GRO J0422+32 with BATSE (Burst and Transient Source Experiment) in the 20-100 keV energy band. Our analysis covers 180 days following the first X-ray detection of the source on August 5, 1992, fully covering its primary and secondary X-ray outbursts. We compute power density spectra (PDSs) in the 20-50, 50-100, and 20-100 keV energy bands, in the frequency interval 0.002-0.488 Hz. The PDSs of GRO J0422+32 are approximately flat up to a break frequency, and decay as a power law above it, with index approximately 1. During the first 70 days of the X-ray outburst, the PDSs of GRO J0422+32 show a significant quasi-periodic oscillation (QPO) peak near approximately 0.2 Hz, superposed on the power-law tail. The break frequency of the PDSs obtained during the primary X-ray outburst of GRO J0422+32 occurs at 0.041 +/- 0.006 Hz; during the secondary outburst, the break is at 0.081 +/- 0.015 Hz. The power density at the break ranged between 44% and 89% / square root of Hz (20-100 keV). The canonical anticorrelation between the break frequency and the power density at the break, observed in Cyg X-1 and other BHCs in the low state, is not observed in the PDSs of GRO J0422+32. We compare our results with those of similar variability studies of Cyg X-1. The relation between the spectral slope and the amplitude of the X-ray variations of GRO J0422+32 is similar to that of Cyg X-1; however, the relation between the hard X-ray flux and the amplitude of its variation is opposite to what has been found in Cyg X-1. Phase lags between the X-ray flux variations of GRO J0422+32 at high and low photon energies could only be derived during the first 30 days of its outburst. During this period, the variations in the 50-100 keV band lag those in the 20-50 keV energy band by an approximately constant phase difference of 0.039(3) rad in the frequency interval 0.02-0.20 Hz. The time lags of GRO J0422+32 during the first 30 days of the outburst decrease with frequency as a power law with index 0.9 for v > 0.01 Hz.

vanderHooft, F.↗

Hard X-Ray Variability of the Black Hole Candidate GRO J0422+32 During its 1992 Outburst

We have studied the hard X-ray variability of the soft X-ray transient GRO J0422+32 with the Burst and Transient Source Experiment (BATSE) in the 20-100 keV energy band. Our analysis covers 180 days following the first X-ray detection of the source on 1992 August 3, fully covering its primary and secondary X-ray outburst. We computed power density spectra (PDSS) in the 20-50, 50-100, and 20-100 keV energy bands., in the frequency interval 0.002-0.488 Hz. The PDSs of GRO J0422+32 are approximately flat up to a break frequency and decay as a power law above, with index about 1. During the first 70 days of the X-ray outburst, the PDSs of GRO J0422+32 show a significant QPO Peak near about 0.2 Hz, superposed on the power-law tail. The break frequency of the PDSs obtained during the primary X-ray outburst of GRO J0422+32 occurs at 0.041+/-0.006 Hz; during the secondary outburst the break is at 0.081q0.01.5 Hz. The power density at the break ranged between 44 and 89% Hz(exp -1/2) 20-100 keV). The canonical anticorrelation between the break frequency and the power density at the break, observed in Cyg X-1 and other BHCs in the low state, is not observed in the PDSs of GRO J0422+32. We compare our results with those of similar variability studies of Cyg X-1. The relation between the spectral slope and the amplitude of the X-ray variations of GRO J0422+32 is similar to that of Cyg X-1.

VanderHooft, F.↗

Attachment of Single-wall Carbon Nanotubes (SWNTs) on Platinum Surfaces by Self-Assembling Techniques

Single-wall carbon nanotubes (SWNTs) are very interesting materials because of their morphology, electronic and mechanical properties. Its morphology (high length-to-diameter ratio) and electronic properties suggest potential application of SWNTs as anode material for lithium ion secondary batteries. The introduction of SWNTs on these types of sources systems will improve their performance, efficiency, and capacity to store energy. A purification method has been applied for the removal of iron and amorphous carbon from the nanotubes. Unpurified and purified SWNTs were characterized by transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). In order to attach carbon nanotubes on platinum electrode surfaces, a self-assembled monolayer (SAM) of 4-aminothiophenol (4-ATP) was deposited over the electrodes. The amino-terminated SAM obtained was characterized by cyclic voltammetry, X-ray photoelectron spectroscopy (XPS), and Fourier-transforms infrared (FTIR) spectroscopy. Carbon nanotubes were deposited over the amino-terminated SAM by an amide bond formed between SAM amino groups and carboxylic acid groups at the open ends of the carbon nanotubes.This deposition was characterized using Raman spectroscopy and Scanning Electron microscopy (SEM).

Rosario-Castro, Belinda I.↗

Kinetics of the CI(2PJ) + CH4 Reaction: Effects of Secondary Chemistry Below 300k

Because of the relatively large disagreement among earlier measurements at low temperatures, the results were examined for possible effects of non-Boltzmann spin distribution and vibrational excitation of CH4, secondary chemistry of CH3 radicals,and impuities in the CH4 source.

atmospheric chemistry kinetics low temperature↗

Contribution of Secondary Neutrinos from Line-of-sight Cosmic-Ray Interactions to the IceCube Diffuse Astrophysical Flux

In 10 years of observations, the IceCube neutrino observatory has revealed a neutrino sky in tension with previous expectations for neutrino point-source emissions. Astrophysical objects associated with hadronic processes might act as production sites for neutrinos, observed as point sources at Earth. Instead, a nearly isotropic flux of astrophysical neutrinos is observed up to PeV energies, prompting a reassessment of the assumed transport and production physics. This work applies a new physical explanation for neutrino production from populations of active galactic nuclei and starburst galaxies to three years of public IceCube point-source data. Specifically, cosmic rays produced at such sources might interact with extragalactic background light and gas along the line of sight, generating a secondary neutrino flux. Furthermore, this model is tested alongside a number of typical flux weighting schemes, in all cases the all-sky flux contribution being constrained to percent levels of the reported IceCube diffuse astrophysical flux.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Cosmic-ray isotopic composition

The 'age' of the cosmic rays and the origin of cosmic ray source matter are discussed. General approaches to the interpretation of the abundances of secondary radioactive nuclides are reviewed using Be-10 as an illustration. The present state of Be-10 based cosmic ray age determinations are summarized, briefly mentioning some recent results based on the isotope Al-26. The effects of nonhomogeneous propagation models on the interpretation of the radioactive isotope observations are mentioned. The cosmic ray source isotopic composition is discussed, emphasizing the neon composition. Mass histogram findings on the abundance of various elements in cosmic rays are described and possible reasons for some abundance enhancements are considered.

Wiedenbeck, M. E.↗

Primary cosmic ray positrons and galactic annihilation radiation

The observation (Leventhal et al, 1978) of positron annihilation radiation at 0.511 MeV from the direction of the Galactic Center is reexamined, suggesting the possibility of a primary positron component of the cosmic rays. The observed 0.511 MeV emission requires a positron production rate nearly two orders of magnitude greater than the production rate of secondary cosmic ray positrons from pion decay produced in cosmic ray interactions. Possible sources of positrons are reviewed with both supernovae and pulsars appearing to be the more likely candidates. If only about 1% of these positrons were accelerated along with the cosmic ray nucleons and electrons to energies not less than 100 MeV, it is believed that these primary positrons would be comparable in intensity to those secondary positrons resulting from pion decay. Some observational evidence for the existence of primary positrons in the cosmic rays is also discussed.

Lingenfelter, R. E.↗

GENESIS: Gamma Energy Neutron Energy Spectrometer for Inelastic Scattering

Improved neutron inelastic scattering cross section data are needed to inform integral benchmark studies and advance applications in a wide variety of areas including nuclear energy, stockpile stewardship, nonproliferation, and space exploration. Neutron inelastic scattering also serves as a non-selective probe of low-lying nuclear structure. To help meet these needs, the Gamma Energy Neutron Energy Spectrometer for Inelastic Scattering (GENESIS) was constructed at the 88-Inch Cyclotron at Lawrence Berkeley National Laboratory. This array couples high-resolution γ-ray detectors and fast neutron detectors to achieve single and coincident n/γ detection over a broad energy range. The current configuration of the array includes 26 organic liquid scintillators and four high-purity germanium detectors (two single-crystal and two four-crystal CLOVER detectors with two-fold segmentation). The array was constructed with minimal supporting material and designed to cover a wide range of secondary particle angles and energies with limited inter-element scattering. Data acquisition is accomplished using Mesytec MDPP-16 multi-channel high-resolution digital pulse processing modules. The array characteristics, including γ-ray and neutron energy resolution, timing resolution, and detection efficiency were measured and used to validate a Geant4 model of the array. Furthermore, the primary sources of neutron background and the uncertainties in the determination of incident and secondary neutron energy were assessed. GENESIS provides a new capability to address nuclear data needs and facilitates the advancement of a wide range of nuclear applications.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Modeling Volatility-Based Aerosol Phase State Predictions in the Amazon Rainforest

Organic aerosol (OA) is a complex matrix of various constituents—fresh (primary organic aerosols—POA) and aged via oxidation (secondary organic aerosols—SOA), generated from biogenic, anthropogenic, and biomass burning sources. The viscosity of OA can be critical in influencing new particle formation, reactive uptake processes that impact evaporation-growth kinetics, and the lifetime of particles in the atmosphere. We report this work utilizes a well-defined relationship between volatility and viscosity for pure compounds, which we incorporated within the Weather Research and Forecasting Model coupled to chemistry (WRF-Chem) to simulate the phase state and viscosity of bulk OA during the dry-to-wet transition season (September–October) in the Amazon rainforest during 2014. Our simulations indicate spatial and temporal heterogeneity in aerosol phase state often not captured by global-scale models. We show the strong role of water associated with organic aerosol ($w_s$) as the dominant factor that can be used to quantitatively estimate OA viscosity. Analysis of WRF-Chem simulations across the entire atmospheric column indicates a strong inverse log-linear relationship between $w_s$ and OA viscosity with a correlation coefficient approaching 1, in the background and biomass burning-influenced conditions. At high altitudes where relative humidity (RH) and temperatures are low, our simulations indicate that OA exists in a semisolid-/solid-like phase state, consistent with previous studies. OA hygroscopicity is strongly correlated (ca. –0.8) with OA viscosity at RH ca. 30–50%, but this RH range is found mostly at low OA concentrations and the middle troposphere (ca. 6–10 km altitudes) in our simulated domain. OA hygroscopicity is uncorrelated with viscosity at higher-RH (near surface) and lower-RH (upper troposphere) regimes. At the urban site near surface, where day–night differences in RH are significant, RH is found to drive the phase state. At the background forested site near surface, where day–night RH differences are small, biomass burning-influenced OA is semisolid and a significant OA associated with background conditions is liquid-like. Simulations indicate a long tail of OA viscosity frequency distributions extending in the semisolid/solid regimes over background biogenic-influenced conditions due to the role of low-volatility OA components such as monoterpene oxidation products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

(abstract) Circumstellar Molecular Gas of the HH 1-2 and HH 24 Exciting Stars

13 CO and C 18 O observations of HH 1-2 VLA and SSV 63, the exciting stars of the HH 1-2 and HH 24 outflows, have been obtained with the Owens Valley Millimeter Array. The HH 1-2 source has been detected in both lines and in the 2.7 mm continuum. In the continuum, the central source appears unresolved in the 5" beam with a flux density of 20 mJy. A secondary peak of 8 mJy appears 12" SE of VLA 1. A strong peak of molecular line emission appears at the position of VLA 1. Molecular gas associated with SSV 63 has also been detected. Maps of circumstellar material of both sources will be presented.

circumstellar↗