SEARCH · Engineering Papers

Results for “route selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

All sources NASA NTRS DOE OSTI

DOE OSTI2026

Precursor-Dependent Routing of Aromatic Amino Acids Determines Lignin Structure in Grasses by Sensitivity-Enhanced Solid-State NMR

Lignin biosynthesis in grasses exhibits unique metabolic flexibility, yet the precursor-specific routing of carbon into lignin polymers remains poorly resolved in planta. Here, we combine 13 C-isotope labeling with solid-state NMR under sensitivity-enhancement by dynamic nuclear polarization (DNP), to directly track phenylalanine- and tyrosine-derived carbon incorporation into the lignin polymer in Brachypodium distachyon. Precursor-specific 13 C labeling reveals that phenylalanine is the dominant contributor to canonical guaiacyl and syringyl lignins, whereas tyrosine preferentially enriches hydroxyphenyl lignin and hydroxycinnamates, including ferulates characteristic of grass cell walls. Two-dimensional 13 C− 13 C correlation NMR resolves distinct lignin moieties arising from each precursor. Disruption of pcoumarate 3-hydroxylase (C3H) selectively impairs phenylalanine-derived lignification, while tyrosine-derived lignin remains comparatively unchanged, maintaining polymer assembly through alternative metabolic routes. These findings show precursordependent control of lignin composition and reveal tyrosine-mediated lignification as a compensatory pathway in grasses. This work also establishes precursor-resolved solid-state NMR and DNP as a powerful framework for dissecting lignin biosynthesis and metabolic plasticity in plant cell walls.

Biopolymers↗

DOE OSTI2017

Enhanced Carbon Dioxide Electroreduction to Carbon Monoxide over Defect-Rich Plasma-Activated Silver Catalysts

Efficient, stable catalysts with high selectivity for a single product are essential if electroreduction of CO 2 is to become a viable route to the synthesis of industrial feedstocks and fuels. A plasma oxidation pre-treatment of silver foil enhances the number of low-coordinated catalytically active sites, which dramatically lowers the overpotential and increases the activity of CO 2 electroreduction to CO. At -0.6 V versus RHE more than 90 % Faradaic efficiency towards CO was achieved on a pre-oxidized silver foil. While transmission electron microscopy (TEM) and operando X-ray absorption spectroscopy showed that oxygen species can survive in the bulk of the catalyst during the reaction, quasi in situ X-ray photoelectron spectroscopy showed that the surface is metallic under reaction conditions. Finally, DFT calculations reveal that the defect-rich surface of the plasma-oxidized silver foils in the presence of local electric fields drastically decrease the overpotential of CO 2 electroreduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2016

Grid indentation analysis of mechanical properties of composite electrodes in Li-ion batteries

We report that electrodes in commercial rechargeable batteries are microscopically heterogeneous materials. The constituent components, including active materials, polymeric binders, and porous conductive matrix, often have large variation in their mechanical properties, making the mechanical characterization of composite electrodes a challenging task. In a model system of LiNi 0.5 Mn 0.3 Co 0.2 O 2 cathode, we employ the instrumented grid indentation to determine the elastic modulus and hardness of the constituent phases. The approach relies on a large array of nanoindentation experiments and statistical analysis of the resulting data provided that the maximum indentation depth is carefully chosen. The statistically extracted properties of the active particles and the surrounding medium are in good agreement with the tests of targeted indentation at selected sites. Lastly, the combinatory technique of grid indentation and statistical deconvolution represents a fast and reliable route to quantify the mechanical properties of composite electrodes that feed the parametric input for the mechanics models.

25 ENERGY STORAGE↗

DOE OSTI2023

Bimetallic NiCu catalysts supported on a Metal-Organic framework for Non-oxidative ethanol dehydrogenation

Non-oxidative ethanol dehydrogenation is a promising route to produce acetaldehyde and hydrogen from sustainable feedstock. Bimetallic NiCu catalysts have shown high efficiency and selectivity for this chemical transformation. In this study, we leverage the high porosity and uniform catalyst deposition sites on a Zr-based metal–organic framework (MOF) catalyst support, NU-1000, to understand how the changes in Cu:Ni ratio affects the reactivity for non-oxidative ethanol dehydrogenation. We found that increasing the Ni 2+ concentration significantly reduces the activation energy of the reaction due to the role of Ni 2+ in suppressing the onset of Cu reduction. Furthermore, this study illustrates how MOFs can be used as catalyst supports to fine-tune the catalyst compositions and understand their effect on the overall catalytic performances.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Targeted Writing and Deleting of Magnetic Skyrmions in Two-Terminal Nanowire Devices

Controllable writing and deleting of nanoscale magnetic skyrmions are key requirements for their use as information carriers for next-generation memory and computing technologies. While several schemes have been proposed, they require complex fabrication techniques or precisely tailored electrical inputs, which limits their long-term scalability. In this work, we demonstrate an alternative approach for writing and deleting skyrmions using conventional electrical pulses within a simple, two-terminal wire geometry. X-ray microscopy experiments and micromagnetic simulations establish the observed skyrmion creation and annihilation as arising from Joule heating and Oersted field effects of the current pulses, respectively. The unique characteristics of these writing and deleting schemes, such as spatial and temporal selectivity, together with the simplicity of the two-terminal device architecture, provide a flexible and scalable route to the viable applications of skyrmions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2024

Electrochemical Conversion of CO 2 to Methyl Formate in a Flow Electrolyzer with Mixed Propylene Carbonate/Methanol Catholyte

Despite the promise of electrochemical carbon dioxide reduction as a technology for the production of clean fuels and decarbonization of the chemical industry, research has mostly focused on aqueous systems with a relatively limited set of products that have been achieved via electrosynthesis. Increasingly, CO 2 electroreduction in nonaqueous solvents is being pursued to develop new avenues for expanding the suite of products that can be made with high selectivity. CO 2 reduction in alcohols coupled with in situ esterification to produce esters is one such route that utilizes nonaqueous electrolyte. To be practical, such electrochemical syntheses need to be translated to a high-performance reactor such as a flow electrolyzer. However, many organic solvents, such as alcohols, wet and flood porous electrodes, thus impeding reactor performance. In this work, methanol was mixed with propylene carbonate as a catholyte for a gas-fed CO 2 flow electrolyzer that avoided cathode flooding. Simultaneously, a dual aqueous anolyte was used for water oxidation as a scalable and sustainable anodic half-reaction. The performance effect of methanol concentration, catholyte acidity, CO 2 flow rate, and dilute water in the catholyte were investigated. With 10 vol % methanol in 90 vol % propylene carbonate, 63% faradaic efficiency for methyl formate ester product was sustained without cathode flooding. However, improvements are still needed to lower the cell resistance and further increase the operating current density.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Mine Tailings Valorization by Electrochemically Stimulated Mineralization from Mildly Acidic Conditions

This study presents a high-efficiency electrochemical process for the mineralization of calcium carbonate (CaCO 3 ) from mildly acidic mine tailing supernatant water. Electrochemical pH control was used to promote carbonate speciation and precipitation from CO 2 -saturated solutions, achieving >1 mol CaCO 3 precipitated per mol e - at applied potentials between -1.4 and -1.6 V vs Ag/AgCl. Product morphology and polymorph selectivity were tunable via applied potential, yielding calcite and vaterite phases. Experiments using real mine tailings water confirmed selective calcite precipitation, despite the presence of sulfate and other trace elements. These results highlight a viable route for coupling CO 2 utilization with mine tailings valorization.

36 MATERIALS SCIENCE↗

DOE OSTI2014

Evaluation of Nanolipoprotein Particles (NLPs) as an In Vivo Delivery Platform

Nanoparticles hold great promise for the delivery of therapeutics, yet limitations remain with regards to the use of these nanosystems for efficient long-lasting targeted delivery of therapeutics, including imparting functionality to the platform, in vivo stability, drug entrapment efficiency and toxicity. In order to begin to address these limitations, we evaluated the functionality, stability, cytotoxicity, toxicity, immunogenicity and in vivo biodistribution of nanolipoprotein particles (NLPs), which are mimetics of naturally occurring high-density lipoproteins (HDLs). We also found that a wide range of molecules could be reliably conjugated to the NLP, including proteins, single-stranded DNA, and small molecules. The NLP was also found to be relatively stable in complex biological fluids and displayed no cytotoxicity in vitro at doses as high as 320 µg/ml. In addition, we observed that in vivo administration of the NLP daily for 14 consecutive days did not induce significant weight loss or result in lesions on excised organs. Furthermore, the NLPs did not display overt immunogenicity with respect to antibody generation. Finally, the biodistribution of the NLP in vivo was found to be highly dependent on the route of administration, where intranasal administration resulted in prolonged retention in the lung tissue. Though only a select number of NLP compositions were evaluated, the findings of this study suggest that the NLP platform holds promise for use as both a targeted and non-targeted in vivo delivery vehicle for a range of therapeutics.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2015

Tandem Microwire Solar Cells for Flexible High Efficiency Low Cost Photovoltaics

This project has developed components of a waferless, flexible, low-cost tandem multijunction III-V/Si microwire array solar cell technology which combines the efficiency of wafered III-V photovoltaic technologies with the process designed to meet the Sunshot object. The project focused on design of lattice-matched GaAsP/SiGe two junction cell design and lattice-mismatched GaInP/Si tandem cell design. Combined electromagnetic simulation/device physics models using realistic microwire tandem structures were developed that predict >22% conversion efficiency for known material parameters, such as tunnel junction structure, window layer structure, absorber lifetimes and optical absorption and these model indicate a clear path to 30% efficiency for high quality III-V heterostructures. SiGe microwire arrays were synthesized via Cu-catalyzed vapor-liquid-solid (VLS) growth with inexpensive chlorosilane and chlorogermance precursors in an atmospheric pressure reactor. SiGe alloy composition in microwires was found to be limited to a maximum of 12% Ge incorporation during chlorogermane growth, due to the melting of the alloy near the solidus composition. Lattice mismatched InGaP double heterostructures were grown by selective epitaxy with a thermal oxide mask on Si microwire substrates using metallorganic vapor phase epitaxy. Transmission electron microscopy (TEM) analysis confirms the growth of individual step graded layers and a high density of defects near the wire/III-V interface. Selective epitaxy was initiated with a low temperature nucleation scheme under “atomic layer epitaxy” or “flow mediated epitaxy” conditions whereby the Ga and P containing precursors are alternately introduced into the reactor to promote layer-bylayer growth. In parallel to our efforts on conformal GaInP heteroepitaxy on selectively masked Si microwires, we explored direct, axial growth of GaAs on Si wire arrays as another route to a tandem junction architecture. We proposed axial, lattice-mismatched growth of a GaAs segment that extrude out of a Si wire via a self-aligned SiO 2 hollow cylindrical mask. With this growth strategy, misfit dislocations that would normally form at the GaAs/Si interface during thin film epitaxy may bend over to and thus terminate at the sidewall of the SiO 2 tube. A reactive-ion etching technique was employed 1) to remove Si to form a hollow, self-aligned SiO 2 cylindrical tube as a growth template for GaAs epitaxy using a vertical, showerhead, low-pressure metal-organic chemical-vapor deposition reactor that was operated at 0.1 atm. Successful epitaxy of axial GaAs wires on non-polar, <111>-oriented Si wire substrates was found at temperatures of ~850C. This and the other III-V/Si heterojunction wire synthesis strategies described here are promising approaches to realize future III-V/Si tandem solar cell designs.

14 SOLAR ENERGY↗

NASA NTRS1977

Oil cooling system for a gas turbine engine

A gas turbine engine fuel delivery and control system is provided with means to recirculate all fuel in excess of fuel control requirements back to aircraft fuel tank, thereby increasing the fuel pump heat sink and decreasing the pump temperature rise without the addition of valving other than that normally employed. A fuel/oil heat exchanger and associated circuitry is provided to maintain the hot engine oil in heat exchange relationship with the cool engine fuel. Where anti-icing of the fuel filter is required, means are provided to maintain the fuel temperature entering the filter at or above a minimum level to prevent freezing thereof. Fluid circuitry is provided to route hot engine oil through a plurality of heat exchangers disposed within the system to provide for selective cooling of the oil.

Coffinberry, G. A.↗

NASA NTRS2012

Processing Issues for Preliminary Melts of the Intermetallic Compound 60-NITINOL

The effect of various high temperature heat treatments and cooling rates on the hardness of cast 60-NITINOL (60wt%Ni- 40wt%Ti) was studied. The hardness ranged from approximately 33 HRC for annealed specimens to 63 HRC for water quenched specimens. Aging did not have a further effect on the hardness of the heat-treated and quenched material. The issue of material contamination and its possible effect on quench cracking during heat treatment above 1000 C was explored. The Charpy impact energy of the material was found to be relatively low (ranging from 0.4 to 1.0 J) and comparable to that of cast magnesium. Selection of service environments and applications for this material based on these findings should consider the processing route by which it was produced.

Stanford, Malcolm K.↗

NASA NTRS2015

The Role of the NASA Global Hawk Link Module as an Information Nexus For Atmospheric Mapping Missions

The Link Module described in this paper was developed for the NASA Uninhabited Aerial System (UAS) Global Hawk Pacific Mission (GloPAC) Airborne Science Campaign; four flights of 30 hour duration, supporting the Aura Validation Experiment (AVE). It was used again during the Genesis and Rapid Intensification Processes (GRIP) experiment, a NASA Earth Science field experiment to better understand how tropical storms form and develop into major hurricanes. In these missions, the Link Module negotiated all communication over the high bandwidth Ku satellite link, archived all the science data from onboard experiments in a spatially enabled database, routed command and control of the instruments from the Global Hawk Operations Center, and re-transmitted select data sets directly to experimenters control and analysis systems. The availability of aggregated information from collections of sensors, and remote control capabilities, in real-time, is revolutionizing the way Airborne Science is being conducted. The Link Module NG now being flown in support of the NASA Earth Venture missions, the Hurricane and Severe Storm Sentinel (HS3) mission, and Airborne Tropical Tropopause Experiment (A TTREX) mission, has advanced data fusion technologies that are further advancing the Scientific productivity, flexibility and robustness of these systems. On-the-fly traffic shaping has been developed to allow the high definition video, used for critical flight control segments, to dynamically allocate variable bandwidth on demand. Historically, the Link Module evolved from the instrument and communication interface controller used by NASA's Pathfinder and Pathfinder plus solar powered UAS's in the late 1990' s. It later was expanded for use in the AIRDAS four channel scanner flown on the NASA Altus UAS, and then again to a module in the AMS twelve channel multispectral scanner flying on the NASA (Predator-b) Ikhana UAS. The current system is the answer to the challenges imposed by extremely long duration UASs, with on-board multi-instrument (>= 12) Sensor Webs.

Hurricanes↗

DOE OSTI2015

A predictive machine learning approach for microstructure optimization and materials design

This paper addresses an important materials engineering question: How can one identify the complete space (or as much of it as possible) of microstructures that are theoretically predicted to yield the desired combination of properties demanded by a selected application? We present a problem involving design of magnetoelastic Fe-Ga alloy microstructure for enhanced elastic, plastic and magnetostrictive properties. While theoretical models for computing properties given the microstructure are known for this alloy, inversion of these relationships to obtain microstructures that lead to desired properties is challenging, primarily due to the high dimensionality of microstructure space, multi-objective design requirement and non-uniqueness of solutions. These challenges render traditional search-based optimization methods incompetent in terms of both searching efficiency and result optimality. In this paper, a route to address these challenges using a machine learning methodology is proposed. A systematic framework consisting of random data generation, feature selection and classification algorithms is developed. In conclusion, experiments with five design problems that involve identification of microstructures that satisfy both linear and nonlinear property constraints show that our framework outperforms traditional optimization methods with the average running time reduced by as much as 80% and with optimality that would not be achieved otherwise.

36 MATERIALS SCIENCE↗

DOE OSTI2018

A Combined Experimental and Theoretical Study on the Activity and Selectivity of the Electrocatalytic Hydrogenation of Aldehydes

A detailed mechanistic study of the electrochemical hydrogenation of aldehydes is presented toward the goal of identifying how organic molecules in solution behave at the interface with charged surfaces and what is the best manner to convert them. Specifically, this study focuses on designing an electrocatalytic route for ambient temperature post-pyrolysis treatment of bio-oil. Aldehyde reductions are needed to convert biomass into fuels or chemicals. A combined experimental and computational approach is taken toward catalyst design to provide testable hypotheses regarding catalyst composition, activity, and selectivity. Electrochemical hydrogenation mechanisms for benzaldehyde and pentanal reduction are found to proceed by a coupled proton-electron transfer process. Initial results show that Au, Ag, Cu, and C catalysts exhibit the highest conversion to alcohol products. These catalysts are suitable because they show high cathodic onset potentials for H2 formation and low cathodic onset potentials for organic reduction. Conversion of aromatic aldehydes is found to be appreciably higher than aliphatic ones. Classical molecular dynamics simulations of solvent and substrate mixtures in an electrolytic cell were performed to assess how species concentrations vary at the solid/liquid interface and in the bulk as a function of applied voltage. Results show that an increase in voltage in the electrolytic cell decreases organic and increases water mole fractions at the solid/liquid interface. In this current study, charged cathodic surfaces result in carbonyl orientations at the surface that do not favor electron transfer. Repulsion of organic substrates to the bulk must be compensated by strong adhesion to the electrode surface. Implications on catalyst choice and process design are discussed.

Pyrolysis Oil upgrading, Atomistic Simulations, El↗

DOE OSTI2026

Hybridization of Excited Interlayer Excitons with Intralayer Excitons in Transition-Metal Dichalcogenide Heterostructures: Interplay of Orbital and Structural Symmetry

Hybridization between interlayer exciton (ILX) and intralayer excitons offers a powerful route to engineer light–matter interactions in transition-metal dichalcogenide (TMDC) heterostructures, yet the underlying mechanism and selection rules remain elusive. Here we probe exciton hybridization in MoTe2/MoSe2 heterobilayers under a tunable out-of-plane electric field and observe distinct avoided crossings in the electric-field dependent reflection spectra. We associate them with coupling between excited ILX states, including the 2p and 2s Rydberg states, and MoTe2 intralayer exciton. Supported by ab initio GW plus Bethe-Salpeter equation (GW-BSE) calculations, we identify the hybridizing states and establish optical selection rules based on the effective angular momentum of the exciton states. These findings highlight the role of excitonic binding in the observed hybridization, rather than that of simple band-mixing models, and provide a new pathway for brightening high-energy dark states.

Yao, Helen [Department of Materials Science and En↗

DOE OSTI2018

Robust Processing of Small-Molecule:Fullerene Organic Solar Cells via Use of Nucleating Agents

The power conversion efficiency (PCE) of small-molecule bulk heterojunction solar cells is highly sensitive to the 'ink' formulation used to produce the photoactive layer. Here we demonstrate that the addition of nucleating agents renders device fabrication notably less susceptible to the ink composition, promising a route toward more robust processing of efficient devices over large areas and enabling more facile materials screening. We selected as a model system blends of 7,7-[4,4-bis(2-ethylhexyl)-4H-silolo[3,2-b:4,5-b]dithiophene-2,6-diyl]bis[6-fluoro-4-(5-hexyl-[2,2-bithiophen]-5-yl)benzo[c][1,2,5]thiadiazole](p-DTS(FBTTh2)2) as the donor and [6,6]-phenyl C71-butyric acid methyl ester (PC71BM) as the acceptor because this is one of the small-molecule OPV blends with a device performance that is most sensitive to ink formulation, especially when used with the processing aid diiodooctane (DIO). Addition of DIO is essential to obtain high device performances; however, a notable increase in device performance is only achieved over a very narrow DIO content regime. Use of nucleating agents drastically changes this situation and leads to well-performing devices even at extreme levels of DIO. We thus start to address here one of the great challenges in organic solar cell research: the fact that, too often, only a very limited composition range leads to high efficiency devices. This means that for every new donor or acceptor a multitude of formulations have to be tested, including in combination with processing aids, to ensure that promising materials are not overlooked. The use of nucleating agents, thus, promises to render materials discovery more straightforward as this dependency of device performance with composition can be reduced.

14 SOLAR ENERGY↗

DOE OSTI2023

Revised Nitrogen Reduction Scaling Relations from Potential-Dependent Modeling of Chemical and Electrochemical Steps

The electrochemical nitrogen reduction reaction (NRR) is a promising route to enable carbon-free ammonia production. However, this reaction is limited by the poor activity and selectivity of current catalysts. The rational design of superior NRR electrocatalysts requires a detailed mechanistic understanding of current material limitations to inform how these might be overcome. The current understanding of how scaling limits NRR on metal catalysts is predicated on a simplified reaction pathway that considers only proton-coupled electron transfer (PCET) steps. Here, we apply grand-canonical density functional theory to investigate a more comprehensive NRR mechanism that includes both electrochemical and chemical steps on 30 metal surfaces in solvent under an applied potential. We applied ..phi..max, a grand-canonical adaptation of the Gmax thermodynamic descriptor, to evaluate trends in catalyst activity. This approach produces a ..phi..max "volcano" diagram for NRR activity scaling on metals that qualitatively differs from the scaling relations identified when only PCET steps are considered. NH3* desorption was found to limit the NRR activity for materials at the top of the volcano and truncate the volcano's peak at increasingly reducing potentials. These revised scaling relations may inform the rational design of superior NRR electrocatalysts. This approach is transferable to study other materials and reaction chemistries where both electrochemical and chemical steps are modeled under an applied potential.

electrocatalysis↗

DOE OSTI2015

MOF-based catalysts for selective hydrogenolysis of carbon–oxygen ether bonds

We demonstrate that metal–organic frameworks (MOFs) can catalyze hydrogenolysis of aryl ether bonds under mild conditions. Mg-IRMOF-74(I) and Mg-IRMOF-74(II) are stable under reducing conditions and can cleave phenyl ethers containing β-O-4, α-O-4, and 4-O-5 linkages to the corresponding hydrocarbons and phenols. Reaction occurs at 10 bar H 2 and 120 °C without added base. DFT-optimized structures and charge transfer analysis suggest that the MOF orients the substrate near Mg 2+ ions on the pore walls. Ti and Ni doping further increase conversions to as high as 82% with 96% selectivity for hydrogenolysis versus ring hydrogenation. Thus repeated cycling induces no loss of activity, making this a promising route for mild aryl-ether bond scission.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗