Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “regolith”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Interpretation of ground-based microwave measurements of the moon using a detailed regolith properties model

A detailed model for the regolith's thermophysical and microwave properties has been used for the interpretation of ground-based measurements of the moon's microwave brightness temperature variation with lunar phase and changes during eclipses. The ground-based measurements include some crucial new lunation variation observations at 2.8, 6.0 and 13.1 cm. The many parameters in the regolith properties model were assigned values based on a careful review of Apollo in situ and lab sample measurements of thermophysical and electrical properties. The first identification of a wavelength-dependent component of scattering is reported.

Gary, B. L.↗

Volatiles in the Martian regolith

An inventory of released volatiles on Mars has been derived based upon Viking measurements of atmospheric and surface chemical composition, and upon the inferred mineralogy of a ubiquitous regolith, assumed to average 200m in depth. This model is consistent with the relative abundances of volatiles (except for S) on the earth's surface, but implies one-fifteenth of the volatile release of earth if starting materials were comparable. All constituents are accommodated as chemical components of, or absorbed phases on, regolith materials - without the necessity of invoking unobservable deposits of carbonates, nitrates, or permafrost ice.

Clark, B. C.↗

Toward a model of grain surface exposure in planetary regoliths

The interpretation of solar wind implanted gas concentration versus particle size for lunar regolith samples is considered. In so doing, interparticle adhesive forces are considered explicitly and the simplest possible grain exposure law consistent with the existence of such forces is hypothesized. Namely, for particles small enough that these forces exceed the lunar gravitational force, any element of area has equal probability of being in the regolith surface regardless of the size of the grain on which it is situated. This law leads to the expectation that concentrations will depend inversely on mean grain radius for small grains and gradually become independent of radius for very large grains consistent with observations. Therefore, such a concentration dependence cannot by used to infer the presence of saturation losses.

Housley, R. M.↗

Vertical-structure effects on planetary microwave brightness temperature measurements - Applications to the lunar regolith

An attempt to constrain the effects of vertical variations in dielectric properties on lunar microwave observations is presented. A numerical approach for deriving the reflectivity and microwave weighting function of a vertically varying half-space is used, assuming variance in the dielectric properties with depth only, and negligible magnetic effects. The cases of continuous and stratified models of vertical structures are discussed, and a concentration of emitted energy in upper layers is found. The total emitted energy oscillates, varying with the thickness of the upper soil layer, but averaging out interference effects due to random variations in the substrate depth. Consideration is also given to the vertical structure effects on the lunation-mean disk-center brightness temperature, its variations, and the regolith electrical loss, and predicted reflectivity effects by feasible models of the lunar regolith dielectric profile.

Keihm, S. J.↗

Howardites - Samples of the regolith of the eucrite parent-body: Petrology of Frankfort, Pavlovka, Yurtuk, Malvern, and ALHA 77302

Modal petrographic methods have been applied to the meteorites Frankfort, Pavlovka, Yurtuk, Malvern, and ALHA 77302, to determine some of the characteristics of the regolith of the eucrite parent body. Lithic clasts in the meteorites fall into three major groups: pyroxene + plagioclase rocks, orthopyroxenites, and fused-soil clasts. Lithic clasts make up a small proportion of the soil; mineral clasts from orthopyroxenites dominate the coarse-grained fraction; and the fine-grained fraction contains minerals from both orthopyroxenites and plagioclase + pyroxene rocks. The eucrite regolith appears to have the following characteristics: the source rocks are friable, the soils are immature, comminution is the major soil-forming process, and the soil is well mixed.

Labotka, T. C.↗

The lunar regolith - Comparative petrology of the Apollo sites

A description is presented of the modal petrology of eight surface soils from the Apollo 11, 12, 14, 15, and 16 landing sites. One of the most striking features of the petrology of the considered soils is found to be the similarity in distribution of pyroxene composition between the soil and the local rock types. The considered investigation is concerned with certain difficulties with respect to an understanding of regolith evolution. Lunar soils contain material foreign to the local geology. The foreign material must have been transported over long distances. However, models of regolith formation on the moon indicate that lateral transport is inefficient. It is found in the investigation that the soil is predominantly of local derivation, that lateral homogenization is a minor process, that foreign material is present in the amounts indicated by bulk chemical mixing models, and that preferential transport of fine-grained material does not occur.

Labotka, T. C.↗

Lunar core 15010/11 - Grain size, petrology, and implications for regolith dynamics

Petrographic observations of six samples from various depths show that core 15010/11 is relatively homogeneous and consists mostly of basalt fragments and minerals derived from basalts. However, it also contains an appreciable highland component nearly equally distributed among the fine-grained fraction, dark matrix breccia and identifiable highland grains, and agglutinates. Grain size data and agglutinates show that this core is not mature and does not contain a well developed reworking profile. The unusual properties of the core are thought to be a direct result of its close proximity to the rim of Hadley Rille. This location favors relatively rapid regolith erosion into the rille, produces a thin regolith, and provides an abundant supply of bedrock-derived ejecta.

Mckay, D. S.↗

Petrology of the Cangas de Onis and nulles regolith breccias Implications for parent body history

The present study of the Cangas de Onis and Nulles H chondrite regolith breccias indicates that the minerals in the matrices and equilibrated clasts have essentially the same compositional distributions, so that much of the material in the castic matrix would have to have been derived from the impact comminution of clats. The apparently exclusive occurrence of H6 clasts in Cangas de Onis, and H4 clasts in Nulles, suggests that, at the locations where these breccias formed, the regolith predominantly consisted of H6 and H4 material, respectively.

Williams, C. V.↗

Evaluation of the mechanical properties of Phobos' regolith

Slopes and heights in craters and grooves which appear to be overlain with regoliths make it possible to set lower limits for regolith strength. The mechanical properties for this material are set at c = 0.001-0.07 N/ sq cm, phi = 5-30 deg.

Kozenko, A. V.↗

The role of regolith adsorption in the transition from early to late Mars climate

Researchers reexamined radiative transfer models of early Mars that were advanced to show the existance of a greenhouse effect. These models were reexamined with regard to the effect that regolith adsorption may have had. It is argued that while the precipitation of carbonates has probably been an important process during Mars history, the rates at which this process could have taken place under early Mars conditions would have dropped sharply once liquid water was fairly scarce. Furthermore, conditions under which liquid water was available may have involved efficient recycling of carbonate so that steady state conditions rather than irreversible CO2 removal prevailed. In contrast, the growth of regolith surface area demands corresponding and predictable CO2 removal from the atmosphere-cap system and is fully capable of terminating any enhanced temperature regime on early Mars in the absence of any other effects.

Fanale, F. P.↗

Mineralogy of a basaltic clast in lunar highland regolith breccia 60019

Mineralogy of a basaltic clast, Ba-2, found on the cut surface of a new slab of lunar highland regolith breccia 60019 was studied and compared with that of lunar meteorites ALHA81005 and Y791197. The coarse-grained Ba-2 clast consists of Na-bearing plagioclase, high-Ca clinopyroxene, ilmenite, silica, and mesostasis. The mineralogy and chemical zoning trends in the Ba-2 clast suggest that this basalt is similar to the 60639,1 basalt in the Apollo 16 rake samples, and to Luna 16 high-alumina moderate-TiO2 mare basalts; however, olivine is not present in Ba-2. On the basis of these and other findings, and assuming the early formation of the Apollo 16 regolith breccia (as proposed by McKay et al., 1986), it is suggested that B-2 could represent a post-Nectaris lava flow older than the formation of 60019.

Takeda, Hiroshi↗

Some probable characteristics of the Martian regolith

A number of Mars surface environmental factors seriously affect the properties of the Martian regolith. The result is a regolith that is rather different from that of the moon. Some of the anticipated differences are discussed: weathering and lack of old glass; desert varnish; lack of micrometeorite impact products; abundance of meteorite fragments; and different grain size characteristics.

King, Elbert A.↗

Origin of fragmental and regolith meteorite breccias - Evidence from the Kendleton L chondrite breccia

Nine specimens of the Kendleton L chondrite, chosen (from the total of 52 that were inspected) for the presence of a wide variety of clasts, were studied microscopically as well as by EMPA with the purpose of investigating the origin of regolith and fragmental meteorite breccias. The results indicate that Kendleton does not contain detectable amounts of solar-wind gases. The Kendleton clasts were found to include a wide variety of L3, L5, shock-blackened, and melt rock clasts, which are considered to have originated from normal L chondrite material, and a unique tridymite-rich inclusion. The results suggest that meteoritic regolith breccias may have different origin from that of lunar breccias.

Ehlmann, A. J.↗

Application of laboratory data to the sputtering of a planetary regolith

The effective yield from a planetary regolith composed of approximately spherical grains is characterized in light of expressions for laboratory sputtering data. In the case of a fully-exposed regolith, the effective yield is of the order of 0.4-1 times the measured yield at normal incidence; the range of variation for this value depends on the nature of the sputtering process employed. These results are applicable to such problems as the magnetospheric plasma sputtering of the outer solar system's icy satellites.

Johnson, R. E.↗

Lunar regolith bagging system

A design of a lunar regolith bag and bagging system is described. The bags of regolith are to be used for construction applications on the lunar surface. The machine is designed to be used in conjunction with the lunar SKITTER currently under development. The bags for this system are 1 cu ft volume and are made from a fiberglass composite weave. The machinery is constructed mostly from a boron/aluminum composite. The machine can fill 120 bags per hour and work for 8 hours a day. The man hours to machine hours ratio to operate the machine is .5/8.

Cannon, Reuben↗

Lunar Regolith Bagging System

A regolith container to be used as a fundamental building block in radiation protection of a habitable lunar base was designed. Parameters for the container are its: size, shape, material, and structural design. Also, a machine was designed to fill the regolith container which is capable of grasping and opening an empty container, filling it, closing it when full, and depositing it on the surface of the Moon. The simple design will bag lunar soil in a relatively short amount of time, with a low equipment weight, and with moving parts distanced from the dirt. The bags are made out of Kevlar 149 with a fabric weight of 6 oz. per square yard. All machine parts are composed of aluminum 6061-T6. Assuming that the vehicle runs at 7 km/hr for 8 hours a day, the machine will bag the necessary 450 cu m of soil in about 12 days. The total mass of the bags and the machine to be shipped to the Moon will be 687 kg. The cost of shipping this weight will be $6.23 million.

Brown, Sebrina↗

Recycled grains in lunar soils as an additional, necessary, regolith evolution parameter

Recycled lunar soil grains are defined as those soil grains that have been a part of either regolith breccias or agglutinates; thus, mineral grains, rock fragments, older agglutinates, and volcanic glass spherules, if dislodged from an agglutinate or a regolith breccia, would all qualify as recycled grains. This paper shows that it is possible to estimate the proportion of recycled material in lunar soils. Optical data from 12 soils in the Apollo 16 core 64001/2 were collected to estimate the proportion (W) of recycled crystalline grains in each of these soils. The W values show a correspondence with other independently derived parameters and the history of the core soils, indicating that W can be used as a valid soil-evolution parameter.

Basu, A.↗