Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “registration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

The influence of topographic structures on night-time surface temperatures: Evaluation of a satellite thermal image of the upper Rhine plain and the surrounding highlands

The author has identified the following significant results. Satellite data supplied the same information as aerial IR registrations with corresponding averaging for all studies requiring a survey of the thermal pattern within an area measuring 10 km x 10 km ore more, provided that sufficiently precise control points could be established for the purpose of geometric rectification in the surroundings of the area observed. Satellite thermal data are more comprehensive than aircraft data for studies on a regional, rather than a local scale, since airborne images often obscure the basic correlation in thermal patterns because of a variety of irrelevant topographical detail. The satellite data demonstrate the dependence of surface temperature on relief more clearly than comparable airborne imagery.

Gossmann, H.↗

The simultaneous inference of stratospheric NO2-H2O and HNO3-CF2Cl2 using limb sounding radiometry

An inversion algorithm has been developed to simultaneously infer the concentrations of two gases with overlapping spectral signatures using limb emission measurements. The algorithm provides a solution in two or three iterations and has been tested in a simulation study for the inference of stratospheric NO2-H2O and HNO3-CF2Cl2. Existing satellite instrumentation was the basis for errors used in the calculations. These included noise, scale and bias errors, angular registration errors, spacecraft motion effects, and effects due to a finite instrument field of view. It is estimated that concentrations of all four gases can be measured globally from a satellite with errors of less than 20%.

Russell, J. M., III↗

Impact of Saturn ring particles on Pioneer 11

The detection of particles near the rings of Saturn by the meteoroid detection instrument on board Pioneer 11 is discussed. The instrument consists of 234 penetration detectors, distributed between two independent data channels each of which is designed to become inhibited for a period of 77 min after the registration of a penetration event in that channel. At least four particles penetrated the detectors in the 4.5 h period around Saturn periapsis at radial distances between 1.36 and 3.1 Saturn radii, a radial distribution inconsistent with the gravitational focusing of meteoroids. The detection of particles which may have been part of the E ring before the crossing of the ring plane suggests that this ring may be 1800 km thick, with an optical thickness greater than 10 to the -8th.

Humes, D. H.↗

Integration of Landsat, Seasat, and other geo-data sources

The paper discusses integration of Landsat, Seasat, and other geographic information sources. Mosaicking of radar data and registration of radar to Landsat digital imagery are described, and six types of geophysical data, including gravity and magnetic measurements, are integrated and analyzed using image processing techniques.

Zobrist, A. L.↗

Solar-Cell String Conveyor

String-conveyor portion of solar-array assembly line holds silicon solar cells while assembled into strings and tested. Cells are transported collector-side-down, while uniform cell spacing and registration are maintained. Microprocessor on machine controls indexing of cells.

Frasch, W.↗

A method for the processing and analysis of digital terrain elevation data

A method is presented for the processing and analysis of digital topography data that can subsequently be entered in an interactive data base in the form of slope, slope length, elevation, and aspect angle. A discussion of the data source and specific descriptions of the data processing software programs are included. In addition, the mathematical considerations involved in the registration of raw digitized coordinate points to the UTM coordinate system are presented. Scale factor considerations are also included. Results of the processing and analysis are illustrated using the Shiprock and Gallup Quadrangle test data.

Junkin, B. G.↗

Method of determination of the mass composition of ring current ions

A method for individual registration of protons, and helium and oxygen ions, with energies E for a charge on the order of 100 kev/q in the ring currents of the Earth's magnetosphere was examined. The method is based on the various specific losses in energy by these ions in matter. The ion current, selected according to E/q, is passed through a solid target, after which identification of the masses is carried out, based on the energy losses in the possibly to reliably divide the flows of protons, and helium and oxygen ions.

Temnyy, V. V.↗

Western energy related overhead monitoring project. Phase 2: Summary

Assistance by NASA to EPA in the establishment and maintenance of a fully operational energy-related monitoring system included: (1) regional analysis applications based on LANDSAT and auxiliary data; (2) development of techniques for using aircraft MSS data to rapidly monitor site specific surface coal mine activities; and (3) registration of aircraft MSS data to a map base. The coal strip mines used in the site specific task were in Campbell County, Wyoming; Big Horn County, Montana; and the Navajo mine in San Juan County, New Mexico. The procedures and software used to accomplish these tasks are described.

Anderson, J. E.↗

Modeling misregistration and related effects on multispectral classification

The effects of misregistration on the multispectral classification accuracy when the scene registration accuracy is relaxed from 0.3 to 0.5 pixel are investigated. Noise, class separability, spatial transient response, and field size are considered simultaneously with misregistration in their effects on accuracy. Any noise due to the scene, sensor, or to the analog/digital conversion, causes a finite fraction of the measurements to fall outside of the classification limits, even within nominally uniform fields. Misregistration causes field borders in a given band or set of bands to be closer than expected to a given pixel, causing additional pixels to be misclassified due to the mixture of materials in the pixel. Simplified first order models of the various effects are presented, and are used to estimate the performance to be expected.

Billingsley, F. C.↗

Space based topographic mapping experiment using Seasat synthetic aperture radar and LANDSAT 3 return beam vidicon imagery

A technique for producing topographic information is described which is based on same side/same time viewing using a dissimilar combination of radar imagery and photographic images. Common geographic areas viewed from similar space reference locations produce scene elevation displacements in opposite direction and proper use of this characteristic can yield the perspective information necessary for determination of base to height ratios. These base to height ratios can in turn be used to produce a topographic map. A test area covering the Harrisburg, Pennsylvania region was observed by synthetic aperture radar on the Seasat satellite and by return beam vidicon on by the LANDSAT - 3 satellite. The techniques developed for the scaling re-orientation and common registration of the two images are presented along with the topographic determination data. Topographic determination based exclusively on the images content is compared to the map information which is used as a performance calibration base.

Mader, G. L.↗

Thematic Mapper - An interim report on anticipated performance

The requirements and design concept of the Thematic Mapper are briefly reviewed. Emphasis is placed on the anticipated on-orbit performance based on subsystem and system level test results obtained from Engineering Model and Protoflight Model hardware. The anticipated performance of the Thematic Mapper is discussed in four key areas: spectral response, radiometric sensitivity, square-wave response, and band-to-band registration.

Engel, J. L.↗

Application of digital image processing techniques to faint solar flare phenomena

Digital image processing of eight solar flare events was performed using the Video Information Communication and Retrieval language in order to study moving emission fronts, flare halos, and Moreton waves. The techniques used include contrast enhancement, isointensity contouring, the differencing of images, spatial filtering, and geometrical registration. The spatial extent and temporal behavior of the faint phenomena is examined along with the relation of the three types of phenomena to one another. The image processing techniques make possible the detailed study of the history of the phenomena and provide clues to their physical nature.

Glackin, D. L.↗

Alignment techniques required by precise measurement of effective focal length

The characteristics of false color imagery produced by instrumentation on earth resource mapping satellites are examined. The spatial fidelity of the imagery is dependent upon the geometric accuracy (GA) and the band-to-band registration (BBR) with which the telescope instrument is assembled. BBR and GA require knowledge of telescope effective focal length (EFL) to one part in 10,000 in order that the next generation of earth mappers be able to carry out their missions. The basis for this level of precision is briefly considered, and a description is given of the means by which such precise EFL measurements have been carried out. Attention is given to accuracy requirements, the technique used to measure effective focal length, possible sources of error in the EFL measurement, approaches for eliminating errors, and the results of the efforts to control measurement errors in EFL determinations.

Wise, T. D.↗

Performance of the HIRS/2 instrument on TIROS-N

The High Resolution Infrared Radiation Sounder (HIRS/2) was developed and flown on the TIROS-N satellite as one means of obtaining atmospheric vertical profile information. The HIRS/2 receives visible and infrared spectrum radiation through a single telescope and selects 20 narrow radiation channels by means of a rotating filter wheel. A passive radiant cooler provides an operating temperature of 106.7 K for the HgCdTe and InSb detectors while the visible detector operates at instrument frame temperature. Low noise amplifiers and digital processing provide 13 bit data for spacecraft data multiplexing and transmission. The qualities of system performance that determine sounding capability are the dynamic range of data collection, the noise equivalent radiance of the system, the registration of the air columns sampled in each channel and the ability to upgrade the calibration of the instrument to maintain the performance standard throughout life. The basic features, operating characteristics and performance of the instrument in test are described. Early orbital information from the TIROS-N launched on October 13, 1978 is given and some observations on system quality are made.

Koenig, E. W.↗

Real-time multiple-look synthetic aperture radar processor for spacecraft applications

A spaceborne synthetic aperture radar (SAR) having pipeline multiple-look data processing is described which makes use of excessive azimuth bandwidth in radar echo signals to produce multiple-looking images. Time multiplexed single-look image lines from an azimuth correlator go through an energy analyzer which analyzes the mean energy in each separate look to determine the radar antenna electric boresight for use in generating the correct reference functions for the production of high quality SAR images. The multiplexed single look image lines also go through a registration delay to produce multi-look images.

Wu, C.↗

Geologic applications of thermal-inertia mapping from satellite

In the Powder River Basin, Wyo., narrow geologic units having thermal inertias which contrast with their surroundings can be discriminated in optimal images. A few subtle thermal inertia anomalies coincide with areas of helium leakage believed to be associated with deep oil and gas concentrations. The most important results involved delineation of tectonic framework elements some of which were not previously recognized. Thermal and thermal inertia images also permit mapping of geomorphic textural domains. A thermal lineament appears to reveal a basement discontinuity which involves the Homestake Mine in the Black Hill, a zone of Tertiary igneous activity and facies control in oil producing horizons. Applications of these data to the Cabeza Prieta, Ariz., area illustrate their potential for igneous rock type discrimination. Extension to Yellowstone National Park resulted in the detection of additional structural information but surface hydrothermal features could not be distinguished with any confidence. A thermal inertia mapping algorithm, a fast and accurate image registration technique, and an efficient topographic slope and elevation correction method were developed.

Offield, T. W.↗

Guidelines for spaceborne microwave remote sensors

A handbook was developed to provide information and support to the spaceborne remote sensing and frequency management communities: to guide sensor developers in the choice of frequencies; to advise regulators on sensor technology needs and sharing potential; to present sharing analysis models and, through example, methods for determining sensor sharing feasibility; to introduce developers to the regulatory process; to create awareness of proper assignment procedures; to present sensor allocations; and to provide guidelines on the use and limitations of allocated bands. Controlling physical factors and user requirements and the regulatory environment are discussed. Sensor frequency allocation achievable performance and usefulness are reviewed. Procedures for national and international registration, the use of non-allocated bands and steps for obtaining new frequency allocations, and procedures for reporting interference are also discussed.

Litman, V.↗

Evaluation of a segment-based LANDSAT full-frame approach to corp area estimation

As the registration of LANDSAT full frames enters the realm of current technology, sampling methods should be examined which utilize other than the segment data used for LACIE. The effect of separating the functions of sampling for training and sampling for area estimation. The frame selected for analysis was acquired over north central Iowa on August 9, 1978. A stratification of he full-frame was defined. Training data came from segments within the frame. Two classification and estimation procedures were compared: statistics developed on one segment were used to classify that segment, and pooled statistics from the segments were used to classify a systematic sample of pixels. Comparisons to USDA/ESCS estimates illustrate that the full-frame sampling approach can provide accurate and precise area estimates.

Bauer, M. E.↗