Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “redox kinetics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Circumventing Kinetic Barriers to Metal Hydride Formation with Metal–Ligand Cooperativity

We report the two-electron, one-proton mechanism of cobalt hydride formation for the conversion of [Co III Cp(P Ph 2 N Bn 2 )(CH 3 CN)] 2+ to [HCo III Cp(P Ph 2 NBn 2 )] + . This complex catalytically converts CO 2 to formate under CO 2 reduction conditions, with hydride formation as a key elementary step. Through a combination of electrochemical measurements, digital simulations, theoretical calculations, and additional mechanistic and thermochemical studies, we outline the explicit role of the P Ph 2 N Bn 2 ligand in the proton-coupled electron transfer (PCET) reactivity that leads to hydride formation. We reveal three unique PCET mechanisms, and we show that the amine on the P Ph 2 N Bn 2 ligand serves as a kinetically accessible protonation site en route to the thermodynamically favored cobalt hydride. Cyclic voltammograms recorded with proton sources that span a wide range of pK a values show four distinct regimes where the mechanism changes as a function of acid strength, acid concentration, and timescale between electrochemical steps. Peak shift analysis was used to determine proton transfer rate constants where applicable. Furthermore, this work highlights the astute choices that must be made when designing catalytic systems, including the basicity and kinetic accessibility of protonation sites, acid strength, acid concentration, and timescale between electron transfer steps, to maximize catalyst stability and efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Relating Solvent Parameters to Electrochemical Properties to Predict the Electrochemical Performance of Vanadium Acetylacetonate for Non-Aqueous Redox Flow Batteries

Non-aqueous redox flow batteries have shown promise for applications in grid energy storage. Increasing the efficiency of these batteries by developing the electrolyte chemistries is needed. Herein, we investigate the correlation between solvent properties and the electrochemical parameters of vanadium acetylacetonate V(acac) 3 . Using cyclic voltammetry (CV) and rotating disk electrode experiments (RDE), we show that trends in the performance of the V(acac) 3 kinetics are directly related to solvent properties. In this study, we found strong relationships between the solvents polarity, viscosity, and donor number with the electrochemical behavior of V(acac) 3 in terms of the electrochemical working widow, electron kinetics and stability towards cycling. Based on these finding, we also demonstrate how solvent selection can be improved with limited a priori knowledge.

25 ENERGY STORAGE↗
DOE OSTI2022

Intercalation of Ca into a Highly Defective Manganese Oxide at Room Temperature

The utilization of oxide frameworks as intercalation cathodes for non-aqueous Ca-ion batteries potentially unlocks a new energy storage system that delivers high energy density. However, the slow kinetics of Ca 2+ in oxide electrodes strongly handicaps their activity and reversibility at room temperature. Here, nanocrystals of layered MnO x containing a high concentration of atomic defects and lattice water are shown to have remarkable electrochemical activity towards Ca 2+ , amounting to a capacity of ~130 mAh/g at room temperature. Multimodal characterization revealed the notable degree of intercalation by probing the structural, compositional and redox changes undertaken by the defective MnO x nanocrystals. The results suggest that the existence of atomic defects and lattice water played a role in improving Ca 2+ diffusivity in the oxide. These outcomes reaffirm the prospects for functional Ca-ion batteries using oxide cathodes under moderate conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

A Cocatalytic System for Electrooxidation of Primary, Secondary, and Benzyl Alcohols Based on a Triruthenium Oxo-Centered Cluster and NHPI

Increasing interest in alternative methods for fuel generation and chemical synthesis has resulted in an increased focus on the development of electrocatalysts for energy relevant small molecule transformations, such as the oxidation of methanol. Partial methanol oxidation is a crucial step in the generation of the commodity chemical formaldehyde, and its complete oxidation to carbon dioxide can also serve as the anodic reaction in direct methanol fuel cells. We report a coelectrocatalytic system comprised of an oxo-centered triruthenium cluster (Ru 3 O) as the catalyst, with the electro-generated N-phthalimido-N-oxyl (PINO) radical species acting as a redox mediator. Only a mild Brønsted base, 2,6-lutidine, is required to achieve an electrocatalytic response. The cocatalytic system demonstrates remarkable cooperativity, shifting the oxidation potential of MeOH (Ep) less positive by ca. 0.5 V compared to the intrinsic response of the Ru 3 O complex. Controlled potential electrolysis on a model substrate, 4-trifluoromethylbenzyl alcohol, demonstrates selective production of the two-electron, two-proton aldehyde product with a Faradaic efficiency of 79 ± 11% at a rate of 3.14 s –1 . The rate of cocatalysis is 50-fold greater than the intrinsic activity of Ru3O and 26-fold greater than that of PINO alone under otherwise identical conditions. Mechanistic studies reveal the oxidation of a Ru 3 O–alkoxide species as the potential-determining step, while two possible rate-determining steps are identified depending on the substrate. A preference for sterically uninhibited electron-rich benzyl alcohol substrates suggests that a H atom transfer from the Ru 3 O–alkoxide adduct to PINO is rate-determining, while the lack of an observed kinetic isotope effect using deuterated MeOH suggests the oxidation of the Ru 3 O–alkoxide species is both rate- and potential-determining for cocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

A three-dimensional pore-scale model for redox flow battery electrode design analysis

A three-dimensional (3-D) pore-scale model has been developed to construct multiscale fibrous electrodes for redox flow batteries (RFB). New designs, such as biporous electrodes modify electrode structures by creating secondary pores on single carbon fiber to reduce internal battery resistance. Existing pore-scale models only resolve electrodes to the single carbon fiber scale and cannot incorporate recent multiscale electrode designs into numerical models. Our new model aims to bridge this gap and provide a tool to rapidly screen new electrode configurations. Two multiscale electrodes, laser-perforated and biporous electrodes, were investigated at varying operation conditions with the proposed 3-D pore-scale models. The laser-perforated electrode exhibits a reduced pressure drop, but follows the same permeability correlation compared to the corresponding pristine electrode. For the biporous electrode, the added specific surface area and faster reaction kinetics from the secondary pores are the most influential factors leading to improved battery efficiency. However, operating the biporous electrode in limiting current density conditions should be avoided due to the decreased mass transfer efficiency and a more significant voltage loss. Finally, we believe that our 3-D pore-scale model can accelerate the flow battery electrode design process and provide new insights into electrode geometry optimizations.

25 ENERGY STORAGE↗
DOE OSTI2022

A Dual–Phase Electrolyte for High–Energy Lithium–Sulfur Batteries

Dissolution of lithium polysulfides (LiPSs) is essential for fast cathode kinetics, but detrimental for anode stability, especially under lean electrolyte conditions. Here in this work, the phase separation phenomenon between solvents with different polarities (tetramethyl sulfone [TMS] and dibutyl ether [DBE]) is utilized to enable the design of a dual-phase electrolyte. High-polarity, high-density TMS–lithium bis(trifluoromethanesulfonyl)imide–ammonium trifluoroacetate as the cathode electrolyte strongly solvates LiPSs, which propel the sulfur redox reaction. Moreover, the composite of DBE and a polymeric ion conductor serves as the anode electrolyte. The addition of DBE in the anode side effectively prevents the crossover of corrosive species (LiPSs and ammonia trifluoroacetate), enabling a significant improvement in Li-metal anode stability. The electrode-specific dual-phase electrolyte design provides electrochemical performance superior to conventional electrolytes. Without additional electrode engineering, pouch cells assemble with the dual-phase electrolyte cycle under a lean electrolyte (4 µL mg –1 ) and low-Li-excess condition (N/P = 3) for 120 cycles.

25 ENERGY STORAGE↗
DOE OSTI2025

Rate Limiting Regimes in Photochemical H2 Generation by Complexes of Colloidal CdS Nanorods and Hydrogenase

Driving redox enzyme catalysis with photoexcited semiconductor nanocrystals is a compelling approach for chemical conversion. We examined how the interplay of the many chemical steps involved determines the rates of photochemical H2 production with complexes of colloidal CdS nanorods and an [FeFe]-hydrogenase. We elucidated the roles of three critical and previously elusive processes-scavenging of photoexcited holes from nanorods, back-electron transfer, and H2 oxidation. Kinetic Monte Carlo simulations and fitting to experimental data revealed that hole transfer becomes the rate-limiting step at high illumination intensities. Comparisons of simulations to experimental H2 production showed that both back-electron transfer and H2 oxidation play an efficiency-limiting role at high catalyst loadings. This work provides guiding principles for tuning experimental parameters to minimize energy-wasting pathways and optimize photochemical product formation. More broadly, we demonstrate how critical but elusive chemical steps in photochemical reactions can be probed with a combination of experiments and simulations.

08 HYDROGEN↗
DOE OSTI2025

High-Energy, High-Power Sodium-Ion Batteries from a Layered Organic Cathode

Sodium-ion batteries (SIBs) attract significant attention due to their potential as an alternative energy storage solution, yet challenges persist due to the limited energy density of existing cathode materials. In principle, redox-active organic materials can tackle this challenge because of their high theoretical energy densities. However, electrode-level energy densities of organic electrodes are compromised due to their poor electron/ion transport and severe dissolution. Here, we report the use of a low-bandgap, conductive, and highly insoluble layered metal-free cathode material for SIBs. It exhibits a high theoretical capacity of 355 mAh g –1 per formula unit, enabled by a four-electron redox process, and achieves an electrode-level energy density of 606 Wh kg –1 electrode (90 wt % active material) along with excellent cycling stability. It allows for facile two-dimensional Na+ diffusion, which enables a high intrinsic rate capability. Growth of the active cathode material in the presence of as little as 2 wt % carboxyl-functionalized carbon nanotubes improves charge transport and charge transfer kinetics and further enhances the power performance. Altogether, these allow the construction of SIB cells built from an affordable, sustainable organic small molecule, which provide a cathode energy density of 472 Wh kg –1 electrode when charging/discharging in 90 s and a top specific power of 31.6 kW kg –1 electrode .

36 MATERIALS SCIENCE↗
DOE OSTI2020

Experimental Investigation of Uranium Volatility during Vapor Condensation

The predictive models that describe the fate and transport of radioactive materials in the atmosphere following a nuclear incident (explosion or reactor accident) assume that uranium-bearing particulates would attain chemical equilibrium during vapor condensation. Here, we show that kinetically driven processes in a system of rapidly decreasing temperature can result in substantial deviations from chemical equilibrium. This can cause uranium to condense out in oxidation states (e.g., UO 3 vs UO 2 ) that have different vapor pressures, significantly affecting uranium transport. To demonstrate this, we synthesized uranium oxide nanoparticles using a flow reactor under controlled conditions of temperature, pressure, and oxygen concentration. The atomized chemical reactants passing through an inductively coupled plasma cool from ~5000 to 1000 K within milliseconds and form nanoparticles inside a flow reactor. The ex situ analysis of particulates by transmission electron microscopy revealed 2–10 nm crystallites of fcc-UO 2 or α-UO 3 depending on the amount of oxygen in the system. α-UO 3 is the least thermodynamically preferred polymorph of UO 3 . The absence of stable uranium oxides with intermediate stoichiometries (e.g., U 3 O 8 ) and sensitivity of the uranium oxidation states to local redox conditions highlight the importance of in situ measurements at high temperatures. Therefore, we developed a laser-based diagnostic to detect uranium oxide particles as they are formed inside the flow reactor. Our in situ measurements allowed us to quantify the changes in the number densities of the uranium oxide nanoparticles (e.g., UO 3 ) as a function of oxygen gas concentration. Our results indicate that uranium can prefer to be in metastable crystal forms (i.e., α-UO 3 ) that have higher vapor pressures than the refractory form (i.e., UO 2 ) depending on the oxygen abundance in the surrounding environment. This demonstrates that the equilibrium processes may not dominate during rapid condensation processes, and thus kinetic models are required to fully describe uranium transport subsequent to nuclear incidents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Construction of MoS 2 /NiS 2 heterostructure with fast interfacial reaction kinetics for ultrafast sodium storage

Constructing heterostructure is a valid method to reinforcing sodium storage performance of transition metal chalcogenides materials. Herein, a simple, safe and controllable one step hydrothermal method is proposed to synthesize MoS 2 /NiS 2 heterostructure. Due to the difference in band gaps and work functions of MoS 2 and NiS 2 , the charges are redistributed at the MoS 2 /NiS 2 heterointerfaces, thereby accelerating the migration of electrons and Na + . The heterointerfaces provide extra active sites for storing Na + , thus increasing the sodium storage capacity of the heterostructure. Furthermore, the distinct redox potentials of NiS 2 and MoS 2 promote the structural stability of MoS 2 /NiS 2 heterostructure during the electrochemical reaction processes. Consequently, the obtained MoS 2 /NiS 2 heterostructure exhibits superior rate properties (339.4 mAh g –1 at 10 A g –1 ) and ultra-stable cycling stability (480.5 mAh g –1 after 350 cycles at 1 A g –1 ). Finally, this paper presents a valid strategy for creating heterostructure anodes with excellent sodium storage properties.

25 ENERGY STORAGE↗
DOE OSTI2025

Tunable Stabilization of Cuprous Ions via Kinetic and Thermodynamic Control of Cu Electrodeposition in Non-Aqueous Media

In this work, significant stabilization of Cu + ions is achieved in non-aqueous electrolytes containing TFSI - and Cl - anions with diglyme as solvent. When Cl - is absent, stabilization of Cu + occurs due to the very low stability constant of Cu 2+ in diglyme. However, in the presence of relatively low Cl - concentrations (i.e., equimolar relative to Cu 2+ ), both Cu + and Cu 2+ form extremely stable Cu 2+ / + [Cl - ] complexes resulting in a similar to 1200 mV negative shift of the Cu + /0 redox couple relative to that of more easily reduced Cu + [TFSI - ][Cl - ] complexes. Furthermore, these results suggest that the lower solvation energies and wider electrochemical stability windows of non-aqueous solvents relative to water enable anions to play a much more significant role in guiding complexation behavior-providing new possibilities for (electro)chemical stabilization of reactive intermediates and highlighting the wealth of unexplored opportunities for electrolyte design in non-aqueous systems.

Anion Association↗
DOE OSTI2023

Tracking the first electron transfer step at the donor side of oxygen-evolving photosystem II by time-resolved infrared spectroscopy

In oxygen-evolving photosystem II (PSII), the multi-phasic electron transfer from a redox-active tyrosine residue (TyrZ) to a chlorophyll cation radical (P680 + ) precedes the water-oxidation chemistry of the S-state cycle of the Mn 4 Ca cluster. Here we investigate these early events, observable within about 10 ns to 10 ms after laser-flash excitation, by time-resolved single-frequency infrared (IR) spectroscopy in the spectral range of 1310–1890 cm -1 for oxygen-evolving PSII membrane particles from spinach. Comparing the IR difference spectra at 80 ns, 500 ns, and 10 µs allowed for the identification of quinone, P680 and TyrZ contributions. A broad electronic absorption band assignable P680 + was used to trace largely specifically the P680 + reduction kinetics. The experimental time resolution was taken into account in least-square fits of P680 + transients with a sum of four exponentials, revealing two nanosecond phases (30–46 ns and 690–1110 ns) and two microsecond phases (4.5–8.3 µs and 42 µs), which mostly exhibit a clear S-state dependence, in agreement with results obtained by other methods. Our investigation paves the road for further insight in the early events associated with TyrZ oxidation and their role in the preparing the PSII donor side for the subsequent water oxidation chemistry.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

The role of transition metal formyl intermediates in the reduction of CO and CO 2

Transition-metal formyl (metalloformyl) complexes occupy a central position in the activation of small molecules, particularly in the reduction of carbon monoxide (CO) and carbon dioxide (CO 2 ). This review examines five decades of progress in the synthesis of metalloformyl complexes and investigations into their structure and reactivity. The bonding in the M–CHO unit is best described as a resonance hybrid between a classical σ-bound formyl ligand and an oxycarbene-like electronic structure, which governs their distinctive spectroscopic signatures and versatile reactivity. Established synthetic routes are summarized, including pathways involving hydride addition and CO insertion, alongside a discussion of the thermodynamic and kinetic factors that control formyl stability. Decomposition pathways and Lewis-acid stabilization strategies are analyzed as key design principles for extending metalloformyl lifetimes under catalytic conditions. Particular attention is given to hydride transfer processes and the role of metalloformyl intermediates as both reactive substrates and hydride sources in reduction chemistry. Lastly, emerging catalytic strategies that exploit metalloformyl intermediates in CO 2 and CO reduction are evaluated, highlighting how control of hydricity, redox potential, and secondary-sphere interactions enables selective C—H bond formation under comparatively mild conditions. Collectively, these studies establish metalloformyl complexes as mechanistically informative and functionally relevant intermediates that bridge fundamental organometallic chemistry with modern approaches to small-molecule activation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

A Novel NASICON‐Type Na 4 MnCr(PO 4 ) 3 Demonstrating the Energy Density Record of Phosphate Cathodes for Sodium‐Ion Batteries

Abstract Sodium‐ion batteries (SIBs) have attracted incremental attention as a promising candidate for grid‐scale energy‐storage applications. To meet practical requirements, searching for new cathode materials with high energy density is of great importance. Herein, a novel Na superionic conductor (NASICON)‐type Na 4 MnCr(PO 4 ) 3 is developed as a high‐energy cathode for SIBs. The Na 4 MnCr(PO 4 ) 3 nanoparticles homogeneously embedded in a carbon matrix can present an extraordinary reversible capacity of 160.5 mA h g −1 with three‐electron reaction at ≈3.53 V during the Na + extraction/insertion process, realizing an unprecedentedly high energy density of 566.5 Wh kg −1 in the phosphate cathodes for SIBs. It is intriguing to reveal the underlying mechanism of the unique Mn 2+ /Mn 3+ , Mn 3+ /Mn 4+ , and Cr 3+ /Cr 4+ redox couples via X‐ray absorption near‐edge structure spectroscopy. The whole electrochemical reaction undergoes highly reversible single‐phase and biphasic transitions with a moderate volume change of 7.7% through in situ X‐ray diffraction and ex situ high‐energy synchrotron X‐ray diffraction. Combining density functional theory (DFT) calculations with the galvanostatic intermittent titration technique, the superior performance is ascribed to the low ionic‐migration energy barrier and desirable Na‐ion diffusion kinetics. The present work can offer a new insight into the design of multielectron‐reaction cathode materials for SIBs.

Zhang, Jian↗
DOE OSTI2022

Investigation of Ca Insertion into α-MoO 3 Nanoparticles for High Capacity Ca-Ion Cathodes

Calcium-ion batteries (CIBs) are a promising alternative to lithium-ion batteries (LIBs) due to the low redox potential of calcium metal and high abundance of calcium compounds. Due to its layered structure, α-MoO 3 is regarded as a promising cathode host lattice. While studies have reported that α-MoO 3 can reversibly intercalate Ca ions, limited electrochemical activity has been noted, and its reaction mechanism remains unclear. Here, we re-examine Ca insertion into α-MoO 3 nanoparticles with a goal to improve reaction kinetics and clarify the storage mechanism. The α-MoO 3 electrodes demonstrated a specific capacity of 165 mA h g –1 centered near 2.7 V vs Ca 2+ /Ca, stable long-term cycling, and good rate performance at room temperature. Furthermore, this work demonstrates that, under the correct conditions, layered oxides can be a promising host material for CIBs and renews prospects for CIBs.

36 MATERIALS SCIENCE↗