Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “qualitative methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Multigrid methods for numerical simulation of laminar diffusion flames

This paper documents the result of a computational study of multigrid methods for numerical simulation of 2D diffusion flames. The focus is on a simplified combustion model, which is assumed to be a single step, infinitely fast and irreversible chemical reaction with five species (C3H8, O2, N2, CO2 and H2O). A fully-implicit second-order hybrid scheme is developed on a staggered grid, which is stretched in the streamwise coordinate direction. A full approximation multigrid scheme (FAS) based on line distributive relaxation is developed as a fast solver for the algebraic equations arising at each time step. Convergence of the process for the simplified model problem is more than two-orders of magnitude faster than other iterative methods, and the computational results show good grid convergence, with second-order accuracy, as well as qualitatively agreement with the results of other researchers.

Liu, C.↗
NASA NTRS2000

In-Situ Planetary Chemical Analysis

Both, the search for evidence of life on Mars and the assessment of the Martian environment in respect to its compatibility with human explorers, will require the ability to measure and understand the aqueous chemistry of the Martian regolith. Direct in-situ chemical analysis is the only method by which chemical biosignatures can be reliably recognized and the toxicity of the regolith accurately assessed. Qualitative and quantitative determination of the aqueous ionic constituents and their concentrations is critical in developing kinetic and thermodynamic models that can be used to accurately predict the potential of the past or present Martian geochemical environment to have either generated or still sustain life. In-situ chemical characterization could provide evidence as to whether the chemical composition of the regolith or evaporates in suspected ancient water bodies have been biologically influenced.

Kounaves, S. P.↗
NASA NTRS2001

Development of Metal Matrix Composites for NASA's Advanced Propulsion Systems

The state-of-the-art development of several Metal Matrix Composites (MMC) for NASA's advanced propulsion systems will be presented. The goal is to provide an overview of NASA-Marshall Space Flight Center's on-going activities in MMC components for advanced liquid rocket engines such as the X-33 vehicle's Aerospike engine and X-34's Fastrac engine. The focus will be on lightweight, low cost, and environmental compatibility with oxygen and hydrogen of key MMC materials, within each of NASA's new propulsion application, that will provide a high payoff for NASA's Reusable Launch Vehicles and space access vehicles. In order to fabricate structures from MMC, effective joining methods must be developed to join MMC to the same or to different monolithic alloys. Therefore, a qualitative assessment of MMC's welding and joining techniques will be outlined.

Lee, J.↗
NASA NTRSDate not supplied

FUN3D Mesh Adaptation Simulations of 4th AIAA High-Lift Prediction Workshop Case 1a

This paper describes in detail the FUN3D Mesh adaptation simulation results for Case 1a of the 4th AIAA High-Lift Prediction Workshop (HLPW-4). The Stabilized Finite Element library with FUN3D is used along with the Negative Spalart-Allmaras One-Equation Model to simulate fully turbulent free-air flow around the High Lift version of the Common Research Model at three flap settings. Meshes are adapted using multi-scale and goal-oriented metrics. The results are presented and the discussion focuses on the predicted differences between the three flap settings. Coefficients of lift, drag, and pitching moment are predicted within 7% of values measured in the QinetiQ 5m Wind Tunnel at each flap setting. Predicted surface pressures and skin friction distributions show inconsistent discrepancies with measurements across the flap settings. Consequently, flap increments for these figures of merit are not well predicted. These predictions are consistent with submissions to the HLPW-4 from other RANS-SA methods. Visualizations of Liutex vortex cores colored by angular velocity are presented as possible new quantitative and qualitative perspective for solution evaluation.

High-Lift Prediction Workshop↗
NASA NTRS2006

Exploration Health Risks: Probabilistic Risk Assessment

Maintenance of human health on long-duration exploration missions is a primary challenge to mission designers. Indeed, human health risks are currently the largest risk contributors to the risks of evacuation or loss of the crew on long-duration International Space Station missions. We describe a quantitative assessment of the relative probabilities of occurrence of the individual risks to human safety and efficiency during space flight to augment qualitative assessments used in this field to date. Quantitative probabilistic risk assessments will allow program managers to focus resources on those human health risks most likely to occur with undesirable consequences. Truly quantitative assessments are common, even expected, in the engineering and actuarial spheres, but that capability is just emerging in some arenas of life sciences research, such as identifying and minimize the hazards to astronauts during future space exploration missions. Our expectation is that these results can be used to inform NASA mission design trade studies in the near future with the objective of preventing the higher among the human health risks. We identify and discuss statistical techniques to provide this risk quantification based on relevant sets of astronaut biomedical data from short and long duration space flights as well as relevant analog populations. We outline critical assumptions made in the calculations and discuss the rationale for these. Our efforts to date have focussed on quantifying the probabilities of medical risks that are qualitatively perceived as relatively high risks of radiation sickness, cardiac dysrhythmias, medically significant renal stone formation due to increased calcium mobilization, decompression sickness as a result of EVA (extravehicular activity), and bone fracture due to loss of bone mineral density. We present these quantitative probabilities in order-of-magnitude comparison format so that relative risk can be gauged. We address the effects of conservative and nonconservative assumptions on the probability results. We discuss the methods necessary to assess mission risks once exploration mission scenarios are characterized. Preliminary efforts have produced results that are commensurate with earlier qualitative estimates of risk probabilities in this and other operational contexts, indicating that our approach may be usefully applied in support of the development of human health and performance standards for long-duration space exploration missions. This approach will also enable mission-specific probabilistic risk assessments for space exploration missions.

Rhatigan, Jennifer↗
NASA NTRS2015

Research Methods Tutorial

A guiding principle for conducting research in technology, science, and engineering, leading to innovation is based on our use of research methodology (both qualitative and qualitative). A brief review of research methodology will be presented with an overview of NASA process in developing aeronautics technologies and other things to consider in research including what is innovation.

Research↗
NASA NTRS2015

Research Methods Tutorial

A guiding principle for conducting research in technology, science, and engineering, leading to innovation is based on our use of research methodology (both qualitative and quantitative). A brief review of research methodology will be presented with an overview of NASA process in developing aeronautics technologies and other things to consider in research including what is innovation.

methodology↗
NASA NTRS1957

Rocket thrust variation with foamed liquid propellants

An analysis is presented on a method for varying rocket thrust by varying the bulk density of the propellants. This density variation was accomplished by uniformly dispersing an inert, insoluble gas in the liquid propellants. Only qualitative agreement with theory was obtained from preliminary experiments with a 1000-pound-thrust ammonia - nitric acid rocket engine; the required experimental gas-flow rates were two to six times greater than those predicted by theory. It was demonstrated, however, that this method of rocket-thrust variation is feasible.

Morrell, G↗
DOE OSTI2024

Differentiating Three-Dimensional Molecular Structures Using Laser-Induced Coulomb Explosion Imaging

Coulomb explosion imaging (CEI) with x-ray free electron lasers has recently been shown to be a powerful method for obtaining detailed structural information of gas-phase planar ring molecules [R. Boll et al., X-ray multiphoton-induced Coulomb explosion images complex single molecules, Nat. Phys. 18, 423 (2022).]. In this Letter, we investigate the potential of CEI driven by a tabletop laser and extend this approach to differentiating three-dimensional structures. We study the static CEI patterns of planar and nonplanar organic molecules that resemble the structures of typical products formed in ring-opening reactions. Here, our results reveal that each molecule exhibits a well-localized and distinctive pattern in three-dimensional fragment-ion momentum space. We find that these patterns yield direct information about the molecular structures and can be qualitatively reproduced using a classical Coulomb explosion simulation. Our findings suggest that laser-induced CEI can serve as a robust method for differentiating molecular structures of organic ring and chain molecules. As such, it holds great promise as a method for following ultrafast structural changes, e.g., during ring-opening reactions, by tracking the motion of individual atoms in pump-probe experiments.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

Evaluation of silicon carbide as a divertor armor material in DIII-D H-mode discharges

Silicon carbide (SiC) represents a promising but largely untested plasma-facing material (PFM) for next-step fusion devices. In this work, an analytic mixed-material erosion model is developed by calculating the physical (via SDTrimSP) and chemical (via empirical scalings) sputtering yield from SiC, Si, and C. The Si content in the near-surface SiC layer is predicted to increase during D plasma bombardment due to more efficient physical and chemical sputtering of C relative to Si. Silicon erosion from SiC thereby occurs primarily from sputtering of the enriched Si layer, rather than directly from the SiC itself. SiC coatings on ATJ graphite, manufactured via chemical vapor deposition, were exposed to repeated H-mode plasma discharges in the DIII-D tokamak to test this model. The qualitative trends from analytic modeling are reproduced by the experimental measurements, obtained via spectroscopic inference using the S/XB method. Quantitatively the model slightly under-predicts measured erosion rates, which is attributed to uncertainties in the ion impact angle distribution, as well as the effect of edge-localized modes. After exposure, minimal changes to the macroscopic or microscopic surface morphology of the SiC coatings were observed. Compositional analysis reveals Si enrichment of about 10%, in line with expectations from the erosion model. Extrapolating to a DEMO-type device, an order-of-magnitude decrease in impurity sourcing, and up to a factor of 2 decrease in impurity radiation, is expected with SiC walls, relative to graphite, if low C plasma impurity content can be achieved. Furthermore, these favorable erosion properties motivate further investigations of SiC as a low-Z, non-metallic PFM.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Dark photon superradiance: Electrodynamics and multimessenger signals

We study the electrodynamics of a kinetically mixed dark photon cloud that forms through superradiance around a spinning black hole, and design strategies to search for the resulting multimessenger signals. A dark photon superradiance cloud sources a rotating dark electromagnetic field which, through kinetic mixing, induces a rotating visible electromagnetic field. Standard model charged particles entering this field initiate a transient phase of particle production that populates a plasma inside the cloud and leads to a system which shares qualitative features with a pulsar magnetosphere. We study the electrodynamics of the dark photon cloud with resistive magnetohydrodynamics methods applicable to highly magnetized plasma, adapting techniques from simulations of pulsar magnetospheres. We identify turbulent magnetic field reconnection as the main source of dissipation and electromagnetic emission, and compute the peak luminosity from clouds around solar-mass black holes to be as large as 10 43 erg/s for observationally allowed dark photon parameter space. The emission is expected to have a significant x-ray component and to potentially be periodic, with period set by the dark photon mass. The luminosity is comparable to the brightest x-ray sources in the Universe, allowing for searches at distances of up to hundreds of Mpc with existing telescopes. Finally, we discuss observational strategies, including targeted electromagnetic follow-ups of solar-mass black hole mergers and targeted continuous gravitational wave searches of anomalous pulsars.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Post Access Report: Initial testing of wave energy powered UV-C LED anti-biofouling system

In the experiment entitled “Initial Testing of Wave Energy Powered UV-C LED Anti-Biofouling System,” a UV-C LED was used to treat platinum-coated titanium coupons emulating CTD electrode material. An additional control set of coupons were exposed to seawater without the LED treatment. The experimental setup was deployed in seawater tanks at PNNL-Sequim’s Marine and Coastal Research Laboratory (MCRL) for the duration of six months. Tank seawater temperature data were collected for the duration of the experimental campaign. At two-month intervals triplicate sets of coupons were removed from both treatment and control test chambers and weighed to characterize biomass accumulation. After weighing, the coupons were photographed in initial condition, with a stain applied to highlight biofouling growth, and after rinsing off excess stain. These photographs were analyzed using PNNL’s Biofouling Growth Index (BGI) software and with a calculation of percentage dark pixels after conversion to grayscale. Additionally, at the final 6-month datapoint triplicate sets of control and test coupons were sent to PNNL-Richland’s Environmental Molecular Sciences Laboratory (EMSL) for scanning electron microscopy. All data organization and collection methods are described in further detail in the document “TEAMER_3newable_Data_Guide.pdf.” Biomass accumulation increased over time on both sets of coupons, and percent area biofouled demonstrated a similar trend. Analysis of the collected data resulted in the findings that treatment method has an impact on biofouling growth, though to a much less significant extent than time does. Additionally, qualitative findings included the presence of advanced life forms such as worms in the control test chamber, but not in the treated test chamber.

16 TIDAL AND WAVE POWER↗
NASA NTRS1973

Approximations in the minimum time-to-climb problem

The minimum time-to-climb problem is formulated as a third order system and three approximate solutions based on reduced order systems are presented. The first of these is the often used energy state, the second is the less frequently used two state and the third is a slightly altered form of the second, herein called the modified two state. These three approximations are discussed and compared both qualitatively and, by using a numerical example, quantitatively. The numerical example is also solved by the steepest descent method to provide a basis for comparison. It is concluded that the modified two state approximation is significantly better than the other two. This approximation is used to assess the sensitivity of climb performance to various vehicle parameters and it is found that, as expected, thrust and weight influence the time-to-climb most strongly.

Ardema, M. D.↗
NASA NTRS1980

Apparent luminosity of solar power satellites

The objective of this investigation was a quantitative characterization of solar power satellite luminosity as seen from the earth. The reflective characteristics of the reference photovoltaic satellite configurations are defined. Diffuse reflection from a single satellite will, at maximum, fall between magnitudes -4 and -5. A 60-satellite fleet will have a maximum total luminosity equivalent to a single object of magnitude -9. Specular reflections from the array and antenna will be of magnitude -12 to -15, but visible only occasionally for about 2 minutes at a given location. Methods of preventing specular reflections from striking the earth are presented. Thermal cycle power conversion systems are discussed qualitatively as a means of reducing diffuse luminosity.

Livingston, L. E.↗
NASA NTRS1988

Optimal use of human and machine resources for Space Station assembly operations

This paper investigates the issues involved in determining the best mix of human and machine resources for assembly of the Space Station. It presents the current Station assembly sequence, along with descriptions of the available assembly resources. A number of methodologies for optimizing the human/machine tradeoff problem have been developed, but the Space Station assembly offers some unique issues that have not yet been addressed. These include a strong constraint on available EVA time for early flights and a phased deployment of assembly resources over time. A methodology for incorporating the previously developed decision methods to the special case of the Space Station is presented. This methodology emphasizes an application of multiple qualitative and quantitative techniques, including simulation and decision analysis, for producing an objective, robust solution to the tradeoff problem.

Parrish, Joseph C.↗
NASA NTRS2001

Lyapunov-Based Sensor Failure Detection And Recovery For The Reverse Water Gas Shift Process

Livingstone, a model-based AI software system, is planned for use in the autonomous fault diagnosis, reconfiguration, and control of the oxygen-producing reverse water gas shift (RWGS) process test-bed located in the Applied Chemistry Laboratory at KSC. In this report the RWGS process is first briefly described and an overview of Livingstone is given. Next, a Lyapunov-based approach for detecting and recovering from sensor failures, differing significantly from that used by Livingstone, is presented. In this new method, models used are in terms of the defining differential equations of system components, thus differing from the qualitative, static models used by Livingstone. An easily computed scalar inequality constraint, expressed in terms of sensed system variables, is used to determine the existence of sensor failures. In the event of sensor failure, an observer/estimator is used for determining which sensors have failed. The theory underlying the new approach is developed. Finally, a recommendation is made to use the Lyapunov-based approach to complement the capability of Livingstone and to use this combination in the RWGS process.

Haralambous, Michael G.↗
NASA NTRS2024

Evaluation of the Accumulation of Foreign Object Debris in the International Space Station Ventilation Systems and Resulting Impacts to Systems

A challenge for the International Space Station (ISS) is accumulation of Foreign Object Debris (FOD) and the impacts to crew, equipment, and experiments. One function of the temperature and humidity control system is to capture FOD with various methods of filtration to minimize these impacts. ISS filtration has been augmented by charcoal filters and screens. A qualitative comparison of the quantity of FOD found over the years and the current levels are evaluated. Impacts to FOD are crew time for cleaning, reduction of equipment life, and component damage and examples are provided. Recommendations for further improvements to reduce the accumulation of FOD on ISS is provided.

ISS↗
NASA NTRS1978

Method and apparatus for measuring minority carrier lifetimes and bulk diffusion length in P-N junction solar cells

Carrier lifetimes and bulk diffusion length are qualitatively measured as a means for qualification of a P-N junction photovoltaic solar cell. High frequency (blue) monochromatic light pulses and low-frequency (red) monochromatic light pulses were alternately applied to the cell while it was irradiated by light from a solar simulator, and synchronously displaying the derivative of the output voltage of the cell on an oscilloscope. The output voltage is a measure of the lifetimes of the minority carriers (holes) in the diffused N layer and majority carriers (electrons) in the bulk P material, and of the diffusion length of the bulk silicon. By connecting a reference cell in this manner with a test cell to be tested in reverse parallel, the display of a test cell that matches the reference cell will be a substantially zero output.

Vonroos, O. H.↗