Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “purification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Expression and purification of recombinant polyomavirus VP2 protein and its interactions with polyomavirus proteins

Recombinant polyomavirus VP2 protein was expressed in Escherichia coli (RK1448), using the recombinant expression system pFPYV2. Recombinant VP2 was purified to near homogeneity by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, electroelution, and Extracti-Gel chromatography. Polyclonal serum to this protein which reacted specifically with recombinant VP2 as well as polyomavirus virion VP2 and VP3 on Western blots (immunoblots) was produced. Purified VP2 was used to establish an in vitro protein-protein interaction assay with polyomavirus structural proteins and purified recombinant VP1. Recombinant VP2 interacted with recombinant VP1, virion VP1, and the four virion histones. Recombinant VP1 coimmunoprecipitated with recombinant VP2 or truncated VP2 (delta C12VP2), which lacked the carboxy-terminal 12 amino acids. These experiments confirmed the interaction between VP1 and VP2 and revealed that the carboxyterminal 12 amino acids of VP2 and VP3 were not necessary for formation of this interaction. In vivo VP1-VP2 interaction study accomplished by cotransfection of COS-7 cells with VP2 and truncated VP1 (delta N11VP1) lacking the nuclear localization signal demonstrated that VP2 was capable of translocating delta N11VP1 into the nucleus. These studies suggest that complexes of VP1 and VP2 may be formed in the cytoplasm and cotransported to the nucleus for virion assembly to occur.

Non-NASA Center↗

Visible-Light-Responsive Catalysts Using Quantum Dot-Modified TiO2 for Air and Water Purification

Photocatalysis, the oxidation or reduction of contaminants by light-activated catalysts, utilizing titanium dioxide (TiO2) as the catalytic substrate has been widely studied for trace contaminant control in both air and water applications. The interest in this process is due primarily to its low energy consumption and capacity for catalyst regeneration. Titanium dioxide requires ultraviolet light for activation due to its relatively large band gap energy of 3.2 eV. Traditionally, Hg-vapor fluorescent light sources are used in PCO reactors; however, the use of mercury precludes the use of this PCO technology in a spaceflight environment due to concerns over crew Hg exposure. The development of a visible-light responsive (VLR) TiO2-based catalyst would eliminate the concerns over mercury contamination. Further, VLR development would allow for the use of ambient visible solar radiation or highly efficient LEDs, both of which would make PCO approaches more efficient, flexible, economical, and safe. Though VLR catalyst development has been an active area of research for the past two decades, there are few commercially available VLR catalysts. Those VLR catalysts that are commercially available do not have adequate catalytic activity, in the visible region, to make them competitive with those operating under UV irradiation. This study was initiated to develop more effective VLR catalysts through a novel method in which quantum dots (QD) consisting of narrow band gap semiconductors (e.g., CdS, CdSe, PbS, ZnSe, etc.) are coupled to TiO2 via two preparation methods: 1) photodeposition and 2) mechanical alloying using a high-speed ball mill. A library of catalysts was developed and screened for gas and aqueous phase applications using ethanol and 4-chlorophenol as the target contaminants, respectively. Both target compounds are well studied in photocatalytic systems and served as model contaminants for this research. Synthesized catalysts were compared in terms of preparation method, nature of the quantum dots, and dosage of quantum dots.

visible light↗

Visible-Light Responsive Catalysts Using Quantum Dot-Modified TiO2 for Air and Water Purification

Photocatalysis, the oxidation or reduction of contaminants by light-activated catalysts, utilizing titanium dioxide (TiO2) as the catalytic substrate has been widely studied for trace contaminant control in both air and water applications. The interest in this process is due primarily to its low energy consumption and capacity for catalyst regeneration. Titanium dioxide requires ultraviolet light for activation due to its relatively large band gap energy of 3.2 eV. Traditionally, Hg-vapor fluorescent light sources are used in PCO reactors; however, the use of mercury precludes the use of this PCO technology in a spaceflight environment due to concerns over crew Hg exposure.

visible light↗

Solid State Air Purification System

Life support systems in spacecraft are designed to provide a safe, habitable environment for the astronauts, and one of the most significant challenges is managing acceptable air quality. Carbon dioxide (CO2) is respired normally by humans at concentrations that are toxic if inhaled directly, and as a result cabin air must be tightly managed. The Carbon Dioxide Removal Assembly (CDRA) currently on board the ISS is the best functioning technology for manned space cabins, but has two significant drawbacks:1. The CDRA requires that air be dried prior to CO2 capture, and this costs energy _ in fact, the system spends 4X more energy drying the air than in actually capturing and releasing carbon dioxide. 2. The CDRA works in batch mode, while downstream CO2 processing systems require a continuous stream of CO2. This adds unnecessary complexity, as well as a second parasitic energy loss.An ideal system would process CO2 continuously without any need for drying of the air, and without any moving parts. Such a system would require a fraction of the size and weight of the CDRA while dropping the cost of CO2 capture by 5X or more. Such a technology would be enabling for future long term manned flight missions, such as a mission to Mars. eSionic is developing a new electrochemical membrane technology using its patented innovations in electrolyte materials. In Phase I of this program eSionic has demonstrated continuous gas separation using only electricity to drive the separation, with no moving parts or pressure drops. In Phase II, eSionic will demonstrate long-term operation of the membranes consistent with the needs of NASA for this development program.

Life Support↗

Wastewater Brine Purification and Recovery through Electrodialysis Ion Exchange

Reutilizing resources onboard the International Space Station (ISS) and for future deep space missions are critical for mission longevity and sustainability. Wastewater brine produced from water recovery systems contain chemical species that could be processed into a potential fertilizer for future plant systems. This can be achieved through a process called electrodialysis ion exchange. Wastewater containing inorganic salt components are fed through a series of ion exchange membranes to produce fertilizer (a phosphate rich stream), electrolysis-grade water, and other useful commodities. Electrodialysis cells consisting of anion and cation exchange membranes, monovalent anion exchange membranes, and bipolar membranes were utilized to achieve selective ion exchange. The use of the electrodialysis cells were effective for both water extraction and ion separation. Ions successfully diffused across their respective membranes into the concentrate, acid, and base streams. This resulted in pure water, a phosphate rich stream, and a separate anion/hydrogen and cation/hydroxide stream. However, sulfate and some phosphate ions were able to diffuse through the monovalent anion exchange membrane into the acid stream. This resulted in predominantly phosphate ions remaining in the concentrate. Optimization of the process was accomplished by altering flowrates of each stream and initial volumes, adjusting the power input and resulting current through each cell, and varying the starting parameters by splitting the inorganic waste input into the diluate and the concentrate. As expected, increasing the flowrate and the power input to each cell reduced the overall time of the process. However, mission constraints may require a longer duration process in order to reduce the power consumption. Further analysis will be required to determine the power input necessary to achieve ion diffusion effectively and in a timely manner.

Ion Exchange Membranes↗

Expression, purification, crystallization and preliminary X-ray analysis of Aeromonas hydrophilia metallo-[beta]-lactamase

The CphA metallo-{beta}-lactamase from Aeromonas hydrophilia has been expressed, purified and crystallized by the hanging-drop vapor-diffusion method using ammonium sulfate as the precipitant. The crystals exhibit orthorhombic symmetry (P2{sub 1}2{sub 1}2), with unit-cell parameters a = 40.75, b = 42.05, c = 128.88 {angstrom}. There is one monomer in the asymmetric unit and the solvent content is estimated to be 44% by volume. A data set extending to 1.8 {angstrom} has been measured.

59 BASIC BIOLOGICAL SCIENCES↗

Purification, crystallization and preliminary X-ray diffraction studies of the three components of the toluene 2,3-dioxygenase enzyme system

Pseudomonas putida F1 can grow with toluene as its sole source of carbon and energy. The initial reaction of the degradation of toluene is catalyzed by a three-component toluene dioxygenase enzyme system consisting of a reductase (Reductase{sub TOL}), a ferredoxin (Ferredoxin{sub TOL}) and a Rieske non-heme iron dioxygenase (Oxygenase{sub TOL}). The three components and the apoenzyme of the dioxygenase (apo-Oxygenase{sub TOL}) were overexpressed, purified and crystallized. Reductase{sub TOL} diffracts to 1.8 {angstrom} and belongs to space group P4{sub 1}2{sub 1}2, with unit-cell parameters a = b = 77.1, c = 156.3 {angstrom}. Ferredoxin{sub TOL} diffracts to 1.2 {angstrom} and belongs to space group P2{sub 1}, with unit-cell parameters a = 30.5, b = 52.0, c = 30.95 {angstrom}, {beta} = 113.7{sup o}. Apo-Oxygenase{sub TOL} and Oxygenase{sub TOL} diffract to 3.2 {angstrom} and belong to space group P4{sub 3}32, with unit-cell parameters a = 235.9 {angstrom} and a = 234.5 {angstrom}, respectively.

59 BASIC BIOLOGICAL SCIENCES↗

IMPROVEMENT OF CdMnTe DETECTOR PERFORMANCE BY MnTe PURIFICATION

Residual impurities in manganese (Mn) are a big obstacle to obtaining high-performance CdMnTe (CMT) X-ray and gamma-ray detectors. Generally, the zone-refining method is an effective way to improve the material's purity. In this work, we purified the MnTe compounds combining the zone-refining method with molten Te, which has a very high solubility for most impurities. We confirmed the improved purity of the material by glow-discharge mass spectrometry (GDMS). We also found that CMT crystals from a multiply-refined MnTe source, grown by the vertical Bridgman method, yielded better performing detectors.

99 GENERAL AND MISCELLANEOUS↗

Three Alginate Lyases from Marine Bacterium Pseudomonas fluorescens HZJ216: Purification and Characterization

Three alginate lyases (A, B, and C) from an alginate-degrading marine bacterium strain HZJ216 isolated from brown seaweed in the Yellow Sea of China and identified preliminarily as Pseudomonas fluorescens are purified, and their biochemical properties are described. Molecular masses of the three enzymes are determined by SDS-PAGE to be 60.25, 36, and 23 kDa with isoelectric points of 4, 4.36, and 4.59, respectively. Investigations of these enzymes at different pH and temperatures show that they are most active at pH 7.0 and 35 C. Alginate lyases A and B are stable in the pH range of 5.0 9.0, while alginate lyase C is stable in the pH range of 5.0 7.0. Among the metal ions tested, additions of Na+, K+, and Mg2+ ions can enhance the enzyme activities while Fe2+, Fe3+, Ba2+, and Zn2+ ions show inhibitory effects. The substrate specificity results demonstrate that alginate lyase C has the specificity for G block while alginate lyases A and B have the activities for both M and G blocks. It is the first report about extracellular alginate lyases with high alginate-degrading activity from P. fluorescens.

59 BASIC BIOLOGICAL SCIENCES↗

Purification and Crystallization of a Multimodular Heterotrimeric Complex Containing Both Type I and Type II Cohesin-dockerin Interactions from the Cellulosome of Clostridium thermocellum

The multimodular scaffoldin subunit CipA is the central component of the cellulosome, a multienzyme plant cell-wall-degrading complex, from Clostridium thermocellum. It captures secreted cellulases and hemicellulases and anchors the entire complex to the cell surface via high-affinity calcium-dependent interactions between cohesin and dockerin modules termed type I and type II interactions. The crystallization of a heterotrimeric complex comprising the type II cohesin module from the cell-surface protein SdbA, a trimodular C-terminal fragment of the scaffoldin CipA and the type I dockerin module from the CelD cellulase is reported. The crystals belonged to space group P2{sub 1}2{sub 1}2{sub 1}, with unit-cell parameters a = 119.37, b = 186.31, c = 191.17 {angstrom}. The crystals diffracted to 2.7 {angstrom} resolution with four or eight molecules of the ternary protein complex in the asymmetric unit.

59 BASIC BIOLOGICAL SCIENCES↗

Membrane-based systems for carbon capture and hydrogen purification

This presentation describes the activities being conducted at Los Alamos National Laboratory to develop carbon capture technologies for power systems. This work is aimed at continued development and demonstration of a membrane based pre- and post-combustion carbon capture technology and separation schemes. Our primary work entails the development and demonstration of an innovative membrane technology for pre-combustion capture of carbon dioxide that operates over a broad range of conditions relevant to the power industry while meeting the US DOE's Carbon Sequestration Program goals of 90% CO{sub 2} capture at less than a 10% increase in the cost of energy services. Separating and capturing carbon dioxide from mixed gas streams is a first and critical step in carbon sequestration. To be technically and economically viable, a successful separation method must be applicable to industrially relevant gas streams at realistic temperatures and pressures as well as be compatible with large gas volumes. Our project team is developing polymer membranes based on polybenzimidazole (PBI) chemistries that can purify hydrogen and capture CO{sub 2} at industrially relevant temperatures. Our primary objectives are to develop and demonstrate polymer-based membrane chemistries, structures, deployment platforms, and sealing technologies that achieve the critical combination of high selectivity, high permeability, chemical stability, and mechanical stability all at elevated temperatures (> 150 C) and packaged in a scalable, economically viable, high area density system amenable to incorporation into an advanced Integrated Gasification Combined-Cycle (IGCC) plant for pre-combustion CO{sub 2} capture. Stability requirements are focused on tolerance to the primary synthesis gas components and impurities at various locations in the IGCC process. Since the process stream compositions and conditions (temperature and pressure) vary throughout the IGCC process, the project is focused on the optimization of a technology that could be positioned upstream or downstream of one or more of the water-gas-shift reactors (WGSRs) or integrated with a WGSR.

08 HYDROGEN↗

Purification of Gas and Liquid Streams Using Composite Sorbents Embedded in a Polyacrylonitrile Matrix

As new sorbents are developed for purifying gases or liquids via physisorption and/or chemisorption processes, the objective is typically to increase the specific surface area (SSA) to maximize the available binding sites for capturing various species of interest. One downfall to making a sorbent more porous is that it often leads to a product that is fragile or friable and can be damaged (resulting in unwanted powders), thus imposing process limitations. Techniques can be used to enhance the mechanical integrity of a sorbent, including heat treatments or pelletization with extrusion or granulation processes, but these can result in collapsed, unavailable pore structures within the sorbent, which decreases the diffusivity and eventually reduces the capacities of target species. An alternative approach for improving the mechanical integrity of the sorbent is to bind it (or encapsulate it) within a porous matrix that passively holds the sorbent in place. Typically, this approach leads to a decrease in sorption efficiency on the basis of starting sorbent mass, because the active sorbent is diluted by the binding matrix material and the active surfaces of the sorbent are somewhat obscured by the binding matrix; however, it comes with the advantage that the active sorbent is held in place and better protected from disintegrating during operation. One approach to securing the active sorbent is to embed it in a macroporous, passive polyacrylonitrile (PAN) matrix to create a composite sorbent. When optimized, the PAN matrix is highly porous and allows for gaseous or aqueous media transport through the product, providing adequate binding site access between the active sorbent and the species of interest. Including a polymer in the composite sorbent limits the maximum operating temperature, above which the composite sorbent incurs loss of structural integrity (e.g., decomposes) and/or reduction in SSA. Composite sorbents have been demonstrated with sulfide aerogels (SnS-PAN) for capturing I2(g), hydrogen mordenite (HZ-PAN) and silver-exchanged mordenite (AgZ-PAN) for capturing Kr and Xe, nanoparticle metal oxides (Nano-Composite Arsenic Sorbent, or N-CAS) for removing arsenic from water, ammonium molybdophosphate (AMP-PAN) for removing cesium-137 (137Cs) from aqueous nuclear waste streams, and The Phosphate Sponge (TPS) composite, which is being used to remove inorganic/ortho-phosphates in water treatment processes to mitigate introduction to the environment, which impedes toxic algae bloom formations. This chapter provides details on production of these materials along with options to optimize the synthesis process. It also includes experimental techniques to characterize products and assess their performance.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Americium and Neptunium Purification Processes and Future Directions

Pure americium and neptunium metals are crucial components in the fabrication of transmutation fuels. Unfortunately, neither neptunium nor americium is available in pure metal form. However, a number of oxides, mixed metals, and mixed oxides that include americium and neptunium are available. Methods were to separate and/or reduce the materials available, in order to obtain pure neptunium and americium metals. New techniques were investigated in FY18 to obtain neptunium and americium metals from their oxides. This report details the processes and results.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗