Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “program plan”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Feedback Control Approaches for Restoration of Power Grids from Blackouts

The automated restoration of power systems with variable energy resources is a timely problem to tackle. Automated restoration advice can support operators in deciding on strategic actions to restore power grids from a blackout with a mix of conventional and renewable generation resources. To this end, this paper frames the restoration process of power grids with solar resources as a nonlinear dynamic model with algebraic constraints in discrete time which is steered by feedback control loops. We discuss two feedback-control strategies based on greedy and reinforcement learning algorithms, and contrast their performance with restoration plans generated by a mixed-integer linear program. We found that the reinforcement learning algorithm infers restoration actions faster than the greedy one. However, the tuning process of the reinforcement learning parameters is slower than for the greedy one.

machine learning↗
DOE OSTI2022

Exploring the benefits of utilizing small modular device for sustainable and flexible shale gas water management

Growing shale gas extraction in recent years has triggered wide discussions on the associated freshwater requirement and wastewater management. Many optimization approaches have been developed for shale gas water management; however, most of the studies assumed permanent utilization of wastewater treatment facilities with fixed capacities. Considering the rapidly declining characteristics of shale gas wastewater production, these treatment facilities could remain largely underutilized after the first few months/years of production, making them less economically attractive. To maximize the capacity utilization of treatment facilities and further improve the economic performance of shale gas development, this study develops a systematic optimization framework, where the capacity strategy of conventional treatment facilities and utilization of the recent concept of modular manufacturing are both considered for flexible shale gas water management. The proposed mixed-integer linear programming (MILP) model simultaneously optimizes the design and planning of integrated shale gas and water supply chain, with a focus on capacity planning for both large-scale conventional treatment facilities and small-scale modular devices. A series of Marcellus-based case studies are performed to illustrate the applicability of the proposed model and provide general insights into the trade-offs between the multiple types of treatment facilities. The optimization results reveal that the combinatorial utilization of conventional facilities and modular devices for wastewater treatment (66% by conventional facilities and 34% by modular devices) brings 9.3% more reused water for other well development and 6.2% savings in water-related costs, compared to flexible management of only conventional facilities. Furthermore, this work suggests that taking modular device as auxiliary equipment for shale gas water management is most beneficial to increase the capacity utilization of treatment facilities and achieve a more economic and sustainable shale gas production system.

04 OIL SHALES AND TAR SANDS↗
DOE OSTI2023

Increasing the Reach of Low-Income Energy Programmes through Behaviourally Informed Peer Referral

Subsidized energy assistance programmes are a popular policy tool for promoting energy justice, but, like other social benefits programmes, are often undersubscribed. To improve uptake, some programmes have turned to social influence strategies, such as asking programme participants to refer their peers. Here, through a field experiment with California's low-income solar programme (N = 7,676), we show that referral behaviour depends on how existing participants are approached. Adding behavioural science strategies to a referral reward increases peer referral rates, referral quality and ultimately solar adoption. Compared with only reminding existing adopters of a potential US$200 reward for referrals that result in adoption, adding an appeal to reciprocity through a non-contingent US$1 gift - and further combining this gift with a simplified referral process - leads to 2.6-5.2 times as many solar contracts. These results highlight the potential of behaviourally informed peer referral programmes to accelerate equitable access to clean energy.

California↗
DOE OSTI2020

Basic Energy Sciences Program Update

This brochure describes updates to the BES program in FY 2019, including new awards, strategic planning activities, and recognition of BES Principal Investigators. It also describes select research highlights from the three divisions in BES.

14 SOLAR ENERGY↗
DOE OSTI2022

A Multistage Stochastic Transmission Expansion Algorithm for Wide-Area Planning under Uncertainty

The overall objective for this project was to develop and demonstrate a set of methods for solving the transmission investment problem for a large network considering many possible scenarios of future conditions and multiple decision points when investments can be made. Project sub-objectives achieved this goal through a succession of extending the methods to apply to problems with increasing complexity or additional features, including the number of decision points, whether generation and transmission are co-optimized, and whether AC or DC power flow is used. A transmission model was developed for the Western Electric Coordinating Council (WECC) region, the high-voltage transmission system that serves the western third of the continental U.S. Using a dataset provided by WECC and by researchers from John Hopkins University, we have validated and demonstrated the model and used it to compare the new method for solving multi-stage stochastic transmission planning to several state-of-the-art techniques. The project has resulted in several key outcomes and achievements: The covariance-based method for choosing a small set of hours to represent short-term variability has superior performance in terms of accuracy to existing methods, including K-means clustering and Importance Sampling; The combined partitioning method for long-term uncertainty with the nested clustering approach for choosing representative hours for each long-term group has superior accuracy for equivalent computational effort compared with existing methods; Using the partitioning/clustering method combined with Sample Average Approximation provides both statistical bounds on the quality of the solution and at the same time, a complete investment plan for all contingencies in the full uncertainty set; no existing methods can provide both at the same time; The method is demonstrated to work well for choosing both transmission and generation investments; A variant on the method allows for both scenario selection and simultaneous correction for the error from the DC power flow approximation to provide a tractable method for AC power flow-based transmission planning under uncertainty; The method applied to the WECC case study demonstrates the additional value to the system operator and the consumer of identifying flexible investment options in the near-term decisions. In particular, the case study exhibits significant option value in postponing some transmission additions that appear useful but in some long-term system states create new congestion problems.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2021

Dosimeter Area Monitoring Program (DAMP) Technical Basis Document

This document provides a technical basis for establishing a Dosimetry-based Area Monitoring Program (DAMP) at Lawrence Livermore National Laboratory (LLNL). A DAMP is part of a comprehensive routine monitoring program and provides information about radiation levels inside and outside of Radiologically-Controlled Areas (RCAs). The routine, hand-held radiation survey program driven by the Health Physics Discipline Action Plan (HP-DAP) helps to ensure radiological conditions within RCAs are well-characterized and routinely monitored; however, such surveys are a snapshot in time, whereas area monitoring dosimeters (AMDs) continuously monitor radiation doses in the areas where they are installed. Together, data from the hand-held radiation surveys and the DAMP provides a comprehensive picture of radiation environment at LLNL. A DAMP helps to verify the effectiveness of established engineered and administrative controls while documenting that radiation doses in RCAs are below that which requires individual monitoring. This document establishes the basis for determining which model of dosimeter to use, the exchange frequency, the occupancy factor, monitoring locations, and a method for evaluating AMD results.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2021

Overview of SoLID

SoLID spectrometer was proposed to fully exploit the potential of JLab 12 GeV energy upgrade. It is a large acceptance detector which can handle very high luminosity. An overview of the rich physics program will be given, which includes number of planned measurements: a multi-dimensional mapping of semi-inclusive DIS asymmetries for tomography of the nucleon in momentum space in the high-x region and precision determination of the tensor charge; a measurement of parity-violating DIS to provide a precision test of the Standard Model, reaching a sensitivity to new physics at 10-20 TeV level; a precision measurement of J/psi photo- and electro-production cross sections in the threshold region to probe the strong color fields in the nucleon and to study the origin of the proton mass. The current status and the plan of the project will be discussed.

Chen, Jian-Ping↗
DOE OSTI2023

VADER in a Nutshell [Slides]

This presentation provides a look into VADER in a nutshell. Topics include going over validation. Additionally, development with a particular look into methodologies is provided. A quick glimpse is given of VADER input, alongside examples of input and output. The presentation concludes with a list of long term and near-term VADER future plans.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗
DOE OSTI2021

Double-differential Measurements of Mesonless Charged-current Muon Neutrino Interactions on Argon with Final-State Protons using the MicroBooNE Detector

This note reports the first double-differential measurements of charged-current $ν_µ$ scattering on argon leading to final states containing zero mesons and one or more protons. This event topology (hereafter abbreviated as CC0$πNp$) is the most common at the neutrino energies typically produced by the Fermilab Booster Neutrino Beam. A detailed understanding of neutrino-argon scattering in the CC0$πNp$ channel is therefore crucial for the success of the precision neutrino oscillation analyses planned for the Short-Baseline Neutrino (SBN) program. This remains true for the upcoming Deep Underground Neutrino Experiment (DUNE), but the higher mean neutrino energy used there will ensure that more inelastic reaction modes, such as single pion production, will also play a major role. The analysis described in this note builds on a previous MicroBooNE study of the CC0$πNp$ channel which obtained the first single-differential cross-section measurements on an argon target. Since that foundational work, significant improvements have been made to MicroBooNE’s simulation software, event reconstruction algorithms, and procedure for calculating systematic uncertainties. When combined with a larger dataset (corresponding to a beam exposure of 6.79 × 10 20 protons-on-target versus 1.60 × 10 20 in Ref. [3]), these enhancements allow the important CC0$πNp$ channel to be studied in more detail. This note begins with a description of the data and simulation samples used as input to the analysis. Section 3 then defines the CC0$πNp$ signal event topology, and Section 4 describes a set of selection criteria designed to identify these events in MicroBooNE data. Binning schemes are then defined in Section 5 for two double-differential measurements of event rates. The first of these considers the momentum and scattering cosine of the outgoing muon, while the second reports the same observables for the leading proton, i.e., the final-state proton with the largest momentum. After a discussion of systematic uncertainties in Section 6, the note concludes by comparing the predictions of MicroBooNE Monte Carlo (MC) simulations to the measured double-differential distributions. These results will form the basis for a future extraction of flux-averaged double-differential CC0$πNp$ cross sections that will be immediately comparable to the theoretical predictions of multiple neutrino event generators. The selection described herein may also be used to study various other observables in CC0$πNp$ events, including those which are sensitive to correlations between leptonic and hadronic kinematics in the final state.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

M3SF-24LL010302062-NEA-TDB Management and International Collaborations in Sorption and Thermodynamic Modeling

This progress report (Level 3 Milestone Number M3SF-24LL010302062) summarizes research conducted at Lawrence Livermore National Laboratory (LLNL) within the Crystalline International Collaborations Work Package Number SF-24LL01030206. The activity is focused on our long-term commitment to engaging our partners in international nuclear waste repository research. This includes participation in the Nuclear Energy Agency Thermochemical Database (NEA-TDB) Project and development of methodologies for integrating US and international thermodynamic databases for use in SFWST Generic Disposal System Assessment (GDSA) efforts. A continuing focus for FY24 efforts is to support the US participation in the NEA-TDB effort. The focus of FY24 activities was the development of an agreement for a Phase 7 activity that will start in Q1 of 2025. Mavrik Zavarin is now the US representative on both the Management Board and the Executive group to the NEA-TDB. He is also the POC for the Cements State of the Art Report that is undergoing peer review in FY24. In FY24, we used our position on the NEA-TDB MB and EG to facilitate the integration of NEA-TDB thermochemical data with LLNL’s SUPCRTNE thermodynamic database that supports the SFWST GDSA activities. This effort is coordinated with the Argillite work package SUPCRTNE database development efforts (Wolery, 2024). The goal is to provide a downloadable database that will be hosted on LLNL’s thermodynamics website which incorporates NEA-TDB data into the LLNL database where appropriate. We also began engagement with the EURAD2 program that was initiated in FY24 by our European collaborators at the Karlsruhe Institute of Technology (KIT), Germany. The primary focus of the engagement is with WP20: DITUSC Thermodynamic database evaluation program. A kickoff meeting for this activity is planned for early FY25. Finally, we have been selected to co-host (with Clemson University) the International Conference on Chemistry and Migration Behaviour of Actinides and Fission Products in the Geosphere in 2025 (Migration2025). The meeting will be held September 21-26, 2025, in New Orleans, Louisiana, and will focus on international efforts to understand the risks of radionuclide releases into the environment. This central focus of this conference is on international efforts to develop safe disposal options for nuclear wastes. As such, we are developing a theme focused on US underground nuclear waste repository science.

58 GEOSCIENCES↗
DOE OSTI2024

Electrifying Terminal Trucks To optimize freight yards

The objectives of this project were to demonstrate the feasibility of electrification for freight yards’ diesel terminal fleets through pilot projects with two or more fleets, and to generate outreach material that can be used regionally and nationally to promote electrification in other terminal fleets. We planned to leverage the data into a model program for adoption of zero emissions freight handling and make information about this project, its outcomes, and the business case for zero emission deployments available to the larger freight marketplace.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

Conference Support, 32nd Western Photosynthesis Conference 2023

This DOE-BES award provided conference support for the 32nd Western Photosynthesis Conference (WPC2023), held January 5–8, 2023 at the Bodega Bay Marine Laboratory in Bodega Bay, California. The Western Photosynthesis Conference is one of three regional photosynthesis meetings held annually in the United States and serves as a primary venue for early-career scientists—graduate students, postdoctoral researchers, and undergraduates—to present research and build professional networks alongside established investigators in the field. Photosynthesis research is central to the DOE Office of Science's Basic Energy Sciences mission, underpinning fundamental understanding of solar energy conversion, biofuels, and the biological transformation of light into chemical energy. DOE-BES funds were used, as proposed, to support registration and housing costs for 20 early-career participants (9 postdoctoral researchers, 9 graduate students, and 2 undergraduates) and to help defray travel costs for two junior invited speakers based outside California, for a total DOE-BES expenditure of $10,060. The meeting was executed as planned, with no significant deviations from the approved program, budget, or schedule. WPC2023 drew 76 registrants across six scientific topic areas, featured 8 of 9 invited/keynote speakers, and provided extensive opportunities for early-career scientists to present talks and posters, compete for recognition awards, and network with senior researchers in the field.

conference↗
DOE OSTI2023

FAST Low-Energy Beamline Studies: Toward High-Peak 5D Brightness Beams for FAST-GREENS

The FAST beamline is the injector for the planned Gamma-Ray Electron ENhanced Source (GREENS) program, which aims to achieve the demonstration and first application of a high-efficiency, high-average-power free-electron laser at 515 nm. FAST-GREENS requires high 5D peak brightness; transverse normalized projected emittances of 3 mm-mrad and a peak current of 600 A are the minimum beam requirements for the FEL to reach the 10% efficiency goal. In this work, studies of the low-energy section of the FAST beamline are presented toward these ends, including preliminary measurements of beam compression and beam emittance. An effort toward developing a high-fidelity simulation model that could be later optimized for FAST-GREENS is presented.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Advanced Materials and Manufacturing Technologies Office

The Advanced Materials and Manufacturing Technologies Office (AMMTO) researches, develops, and demonstrates next-generation materials and manufacturing technologies needed to increase U.S. industrial competitiveness and to advance economy-wide decarbonization. AMMTO supports the national plan to revitalize American manufacturing, secure critical supply chains, and develop diverse innovation ecosystems leading to new manufacturing jobs and increased economic strength and security of the nation. AMMTO provides planning, management, and direction necessary for a balanced program of research, development, demonstration, technical assistance, and workforce development to support domestic manufacturing that is critical to achieving a clean, decarbonized economy.

Next Generation materials and processes, secure an↗
DOE OSTI2023

Communities LEAP (Local Energy Action Program) Pilot

The Communities Local Energy Action Program (LEAP) pilot overview fact sheet provides background on the opportunities and benefits of the program, the various pathways that communities are pursuing, and the technical assistance provided.

C-LEAP↗
DOE OSTI2025

Fundamental Path Optimization Strategies for Extrusion-based Additive Manufacturing

Extrusion-based additive manufacturing processes begin with a software program, called a slicer, that generates layer geometry and fits toolpaths to each layer to define where material is to be extruded or deposited. Before the toolpaths are output as g-code for the additive manufacturing system to execute, the toolpaths should be optimized. Many complex optimization approaches using graph theory, Chinese postman problem, and other complex mathematical models exist, but these approaches are rarely used in daily printing operations and are not available through common slicing programs such as Cura and PrusaSlicer. Instead, path planning and optimization typically revolves around simpler, fully automated approaches such as inside out and next closest. This paper will explore the fundamental optimization strategies for toolpath planning and document a new implementation, available via open-source slicing software, that allows for greater control of the path planning process.

Roschli, Alex [ORNL] (ORCID:0000000213084632)↗
DOE OSTI2023

Staffing Analyses Tool

The Staffing Analyses Tool is an interactive resource planning tool used for visualizing programmatic staffing financial information. This dashboard provides historical and current staff charging data under organizations’ and/or programs’ views. This tool is used to manage staffing cost and inform outyear planning. It was developed in collaboration with Associate Laboratory Directorate for Infrastructure and Capital Projects (ALDICP) Planning Office.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗
DOE OSTI2021

Experimental Plan for the Vermiculite Study

Homes in which vermiculite, which can contain asbestos, is present are often deferred under the DOE Weatherization Assistance Program (WAP) because of uncertainty in how to safely weatherize such homes from a client and worker perspective and the potential costs associated with alternative approaches. Recognizing this situation, the Department of Energy (DOE) tasked the Oak Ridge National Laboratory (ORNL) to perform a research project that scientifically identifies the asbestos exposure risks in weatherizing homes with existing vermiculite insulation. Current approaches being used by Grantees and Subgrantees to weatherize homes with existing vermiculite insulation were identified as part of the development of this experimental plan based on a review of Grantee Health and Safety Plans and communications with weatherization program staff from seven states. Other than deferral, these approaches include the following:1.) Abating (i.e., removing) the existing vermiculite using funding sources other than WAP (e.g., state funds, utility funds, the Zonolite Attic Insulation Trust Fund, and possibly homeowner contributions) because abatement is not allowed using WAP funds per Weatherization Program Notice (WPN) 17-7. 2.) Weatherizing the house as normal after testing reveals that the vermiculite contains less than 1% asbestos. 3.) Avoiding areas of the house where vermiculite is installed and weatherizing the remaining areas of the house as normal. 4.) Encapsulating the existing vermiculite insulation in an attic by blowing cellulose or other insulation over it. 5.) Weatherizing the areas of the house where vermiculite is installed using unique/alternative approaches developed specifically for that house. Blower door testing is also impacted by the presence of vermiculite due to the concern of bringing asbestos fibers into the space. Some states address this by performing pressurized blower door tests, whereas other states prohibit blower door testing entirely when vermiculite is present. This research project will focus on gathering data on home occupant and weatherization worker exposures to asbestos before, during, and/or after the weatherization of the homes containing vermiculite insulation using five of the six approaches identified above. Abatement of the existing vermiculite insulation will not be studied because it is not allowed using WAP funding per WPN 17-7 and, thus, is not a sustainable approach for WAP.

36 MATERIALS SCIENCE↗